Which one of the following units is used to measure intensity of noise? (A) decible (B) Hz (C) Phon (D) Watts/m2

Which one of the following units is used to measure intensity of noise? (A) decible (B) Hz (C) Phon (D) Watts/m2

by

1 Answer

Answer :

(A) decible
by

Related questions

Human ear is most sensitive to noise in the following frequency ranges: (A) 1-2 KHz (B) 100-500 Hz (C) 10-12 KHz (D) 13-16 KHz

Description : Human ear is most sensitive to noise in the following frequency ranges: (A) 1-2 KHz (B) 100-500 Hz (C) 10-12 KHz (D) 13-16 KHz

Last Answer : (A) 1-2 KHz

The total noise power present in a 1-Hz bandwidth . A. Noise density B. Noise figure C. Noise limit D. Noise intensity

Description : The total noise power present in a 1-Hz bandwidth . A. Noise density B. Noise figure C. Noise limit D. Noise intensity

Last Answer : A. Noise density

If I add 3 90 decible alarms will it be 270 decibles?

Description : If I add 3 90 decible alarms will it be 270 decibles?

Last Answer : Not completely, its blurs together but not as much as addition. It would probably be around 150 decibles or something.

The eddy current loss in an a-c electric motor is 100 watts at 50 Hz. Its loss at 100 Hz will be (A) 25 watts (B) 59 watts (C) 100 watts (D) 400 watts

Description : The eddy current loss in an a-c electric motor is 100 watts at 50 Hz. Its loss at 100 Hz will be (A) 25 watts (B) 59 watts (C) 100 watts (D) 400 watts

Last Answer : (D) 400 watts

The eddy current loss in an AC motor is 100 watts at 50 Hz. Its losses at 100 Hz will be:

Description : The eddy current loss in an AC motor is 100 watts at 50 Hz. Its losses at 100 Hz will be: (A) 25 watts (B) 59 watts (C) 100 watts (D) 400 watts

Last Answer : The eddy current loss in an AC motor is 100 watts at 50 Hz. Its losses at 100 Hz will be: 400 watts

What is considered the threshold of audibility at 3000 Hz? A. 10-12 W/m2 B. 10-16 W/m2 C. 10-12 W/cm2 D. 10-15 W/cm2

Description : What is considered the threshold of audibility at 3000 Hz? A. 10-12 W/m2 B. 10-16 W/m2 C. 10-12 W/cm2 D. 10-15 W/cm2

Last Answer : A. 10-12 W/m2

Which of the following is the unit of perceived loudness of sound? (1) Decibel (2) Sone (3) Hertz (4) Phon

Description : Which of the following is the unit of perceived loudness of sound? (1) Decibel (2) Sone (3) Hertz (4) Phon

Last Answer : (2) Sone Explanation: Loudness is a subjective characteristic of a sound (as opposed to the sound-pressure level in decibels, which is objective and directly measurable). Perceived loudness of sound ... on sound pressure level, the frequency spectrum, and the time behavior of the sound in question.

What is the typical loudness level of a watch ticking? A. 0 phon B. 40 phons C. 20 phons D. 60 phons

Description : What is the typical loudness level of a watch ticking? A. 0 phon B. 40 phons C. 20 phons D. 60 phons

Last Answer : C. 20 phons

The unit of pitch A. Decibel B. Phon C. Mel D. Sone

Description : The unit of pitch A. Decibel B. Phon C. Mel D. Sone

Last Answer : C. Mel

Which of the following is the unit of perceived loudness of sound ? (1) Decibel (2) Sone (3) Hertz (4) Phon

Description : Which of the following is the unit of perceived loudness of sound ? (1) Decibel (2) Sone (3) Hertz (4) Phon

Last Answer : Sone

The sound intensity received from the nearby jet plane is 12.6 µW/m2 and that from another jet plane some distance away is 0.45 µW/m2 . Find the relative loudness of the two. A. 14.0 dB B. 14.5dB C. 12.5 D. 14.5

Description : The sound intensity received from the nearby jet plane is 12.6 µW/m2 and that from another jet plane some distance away is 0.45 µW/m2 . Find the relative loudness of the two. A. 14.0 dB B. 14.5dB C. 12.5 D. 14.5

Last Answer : B. 14.5dB

What sound intensity corresponds to a sound-intensity level of 50dB? A. 1 x 10-6W/m2 B. 1 x 10-7W/m2 C. 1 x 10-8W/m2 D.1 x 10-5W/m2

Description : What sound intensity corresponds to a sound-intensity level of 50dB? A. 1 x 10-6W/m2 B. 1 x 10-7W/m2 C. 1 x 10-8W/m2 D.1 x 10-5W/m2

Last Answer : B. 1 x 10-7W/m2

For the safety and comfort of factory workers, the sound-intensity level in a certain factory must remain below 85 dB. What is the maximum sound intensity allowed in this factory? A. 3.2 x 10-4 W/m2 B. 3.2 x 10-6 W/m2 C. 3.2 x 10-10 W/m2 D. 3.2 x 10-3 W/m2

Description : For the safety and comfort of factory workers, the sound-intensity level in a certain factory must remain below 85 dB. What is the maximum sound intensity allowed in this factory? A. 3.2 x 10-4 W/m2 B. 3.2 x 10-6 W/m2 C. 3.2 x 10-10 W/m2 D. 3.2 x 10-3 W/m2

Last Answer : A. 3.2 x 10-4 W/m2

The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3 , is (A) 4 t/m2 (B) 5 t/m2 (C) 6 t/m2 (D) 7 t/m2

Description : The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3 , is (A) 4 t/m2 (B) 5 t/m2 (C) 6 t/m2 (D) 7 t/m2

Last Answer : Answer: Option C

The pressure intensity in kN/m2 (or kPa) at any point in a liquid is (where w = Specific weight of liquid, and h = Depth of liquid from the surface) (A) w (B) wh (C) w/h (D) h/w

Description : The pressure intensity in kN/m2 (or kPa) at any point in a liquid is (where w = Specific weight of liquid, and h = Depth of liquid from the surface) (A) w (B) wh (C) w/h (D) h/w

Last Answer : Answer: Option B

If weed population is 70/m2 and the crop 140/ m2, weed intensity would be a). 33.3% b). 66.6% c). 50% d). 73.4%

Description : If weed population is 70/m2 and the crop 140/ m2, weed intensity would be a). 33.3% b). 66.6% c). 50% d). 73.4%

Last Answer : a). 33.3%

Weed intensity if number of weeds is 110/m2 and wheat plants are 90/m2. a). 55% b). 110% c). 22.5% d). 77.5%

Description : Weed intensity if number of weeds is 110/m2 and wheat plants are 90/m2. a). 55% b). 110% c). 22.5% d). 77.5%

Last Answer : a). 55%

A teacher in a classroom has immediate control over (A) the self, selected methods of communication and the message. (B) the audience, the noise and the reception. (C) the feedback, the technology and the audience experience. (D) the communication channel, other communicators, and external factors.

Description : A teacher in a classroom has immediate control over (A) the self, selected methods of communication and the message. (B) the audience, the noise and the reception. (C) the feedback, the technology and the audience experience. (D) the communication channel, other communicators, and external factors.

Last Answer : (A) the self, selected methods of communication and the message.

Internal and external factors that affect message reception by the students in the classroom are referred to as (A) feedback (B) fragmentation (C) channelization (D) noise

Description : Internal and external factors that affect message reception by the students in the classroom are referred to as (A) feedback (B) fragmentation (C) channelization (D) noise

Last Answer : Answer: D

In circular communication, the encoder becomes a decoder when there is (A) noise (B) audience (C) criticality (D) feedback

Description : In circular communication, the encoder becomes a decoder when there is (A) noise (B) audience (C) criticality (D) feedback

Last Answer : Answer: D

Level C of the effectiveness of communication is defined as: (A) channel noise (B) semantic noise (C) psychological noise (D) source noise

Description : Level C of the effectiveness of communication is defined as: (A) channel noise (B) semantic noise (C) psychological noise (D) source noise 

Last Answer : (A) channel noise

"lf a large diamond is cut up into little bits, it will lose its value just as an army is divided up into small units of soldiers, it loses its strength." The argument put above may be called as (A) Analogical (B) Deductive (C) Statistical (D) Casual

Description : "lf a large diamond is cut up into little bits, it will lose its value just as an army is divided up into small units of soldiers, it loses its strength." The argument put above may be called as (A) Analogical (B) Deductive (C) Statistical (D) Casual

Last Answer : (A) Analogical

Which one of the following principles is not applicable to sampling? (A) Sample units must be clearly defined (B) Sample units must be dependent on each other (C) Same units of sample should be used throughout the study (D) Sample units must be chosen in a systematic and objective manner

Description : Which one of the following principles is not applicable to sampling? (A) Sample units must be clearly defined (B) Sample units must be dependent on each other (C) Same units of sample should be used throughout the study (D) Sample units must be chosen in a systematic and objective manner

Last Answer : (B) Sample units must be dependent on each other

In SI units the power of sound is represented in A. Kgs B. Joules C. Newtons D. Watts

Description : In SI units the power of sound is represented in A. Kgs B. Joules C. Newtons D. Watts

Last Answer : ANS: D

The units of moment of inertia are a.kgm4 b.kg-m2 c.kg/m2 d.kg/m e.m4

Description : The units of moment of inertia are a.kgm4 b.kg-m2 c.kg/m2 d.kg/m e.m4

Last Answer : c. kg/m2

In SI units, thermal conductivity is expressed in (A) Watt/m.°K (B) Watt/m2 . °K (C) Watt/m2 . °K (D) Watt/m4 . °K

Description : In SI units, thermal conductivity is expressed in (A) Watt/m.°K (B) Watt/m2 . °K (C) Watt/m2 . °K (D) Watt/m4 . °K

Last Answer : (A) Watt/m.°K

In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/s (B) μ , α and θ all have units of m2/s (C) α and θ have units of m2/s, while μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Description : In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/ ... μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Last Answer : Option C

The unit of kinematic viscosity in S. I. units is (A) N-m/s (B) N-s/m2 (C) m 2 /s (D) N-m

Description : The unit of kinematic viscosity in S. I. units is (A) N-m/s (B) N-s/m2 (C) m 2 /s (D) N-m

Last Answer : Answer: Option C

The unit of dynamic viscosity in S.I. units is (A) N-m/s2 (B) N-s/m2 (C) Poise (D) Stoke

Description : The unit of dynamic viscosity in S.I. units is (A) N-m/s2 (B) N-s/m2 (C) Poise (D) Stoke

Last Answer : Answer: Option B

The SI units of permitivity are: (a) N.m/C2(b) C2/N.m2 (c) N.m2/C2(d) N.m/C

Description : The SI units of permitivity are: (a) N.m/C2(b) C2/N.m2 (c) N.m2/C2(d) N.m/C

Last Answer : (b) C2/N.m2

The unit of Torque in SI units (a) kg-m (b) kg-cm (c) N-m (d) N/m2

Description : The unit of Torque in SI units (a) kg-m (b) kg-cm (c) N-m (d) N/m2

Last Answer : (c) N-m

Which of the following is not a measure of Human Development Index? (A) Literacy Rate (B) Gross Enrolment (C) Sex Ratio (D) Life Expectancy

Description : Which of the following is not a measure of Human Development Index? (A) Literacy Rate (B) Gross Enrolment (C) Sex Ratio (D) Life Expectancy

Last Answer : Answer: C

Which one of the following methods serve to measure correlation between two variables? (A) Scatter Diagram (B) Frequency Distribution (C) Two-way table (D) Coefficient of Rank

Description : Which one of the following methods serve to measure correlation between two variables? (A) Scatter Diagram (B) Frequency Distribution (C) Two-way table (D) Coefficient of Rank Correlation

Last Answer : (D) Coefficient of Rank Correlation 

The importance of the correlation co-efficient lies in the fact that: (A) There is a linear relationship between the correlated variables. (B) It is one of the most valid measure of statistics. (C) It allows one to determine the degree or strength of the association be tween two variables. (D) It is a non-parametric method of statistical analysis.

Description : The importance of the correlation co-efficient lies in the fact that: (A) There is a linear relationship between the correlated variables. (B) It is one of the most valid measure of statistics. ... of the association be tween two variables. (D) It is a non-parametric method of statistical analysis.

Last Answer : (C) It allows one to determine the degree or strength of the association be tween two variables.

A statistical measure based upon the entire population is called parameter while measure based upon a sample is known as: (A) Sample parameter (B) Inference (C) Statistics (D) None of these

Description : A statistical measure based upon the entire population is called parameter while measure based upon a sample is known as: (A) Sample parameter (B) Inference (C) Statistics (D) None of these

Last Answer : (C) Statistics

Reference noise is ___________. A. a 1000 Hz, -90 dBm tone B. a noise that creates the same interfering effect as a 1000Hz, -90dBm tone C. a noise that creates zero dBrn in a voice channel D. B and C above

Description : Reference noise is ___________. A. a 1000 Hz, -90 dBm tone B. a noise that creates the same interfering effect as a 1000Hz, -90dBm tone C. a noise that creates zero dBrn in a voice channel D. B and C above

Last Answer : D. B and C above

What is the reference frequency of CCIT phosphomeric noise measurement? A. 800 HzB. 1000 Hz C. 1500 Hz D. 3400 Hz

Description : What is the reference frequency of CCIT phosphomeric noise measurement? A. 800 Hz B. 1000 Hz C. 1500 Hz D. 3400 Hz

Last Answer : A. 800 Hz

What bandwidth is needed to support a capacity of 128 kbps when the signal power to noise power ratio in decibels is 100? A. 19224 Hz B. 3853 Hz C. 19244 Hz D. 3583 Hz

Description : What bandwidth is needed to support a capacity of 128 kbps when the signal power to noise power ratio in decibels is 100? A. 19224 Hz B. 3853 Hz C. 19244 Hz D. 3583 Hz

Last Answer : B. 3853 Hz

Flicker noise is a poorly understood form of noise which may be completely ignored about above ____. A.100 Hz B. 200 Hz C. 400 Hz D. 500 Hz

Description : Flicker noise is a poorly understood form of noise which may be completely ignored about above ____. A.100 Hz B. 200 Hz C. 400 Hz D. 500 Hz

Last Answer : D. 500 Hz

What is the reference frequency of CCITT psophometric noise measurement? A. 800 Hz B. 1500 Hz C. 3400 Hz D. 1000 Hz

Description : What is the reference frequency of CCITT psophometric noise measurement? A. 800 Hz B. 1500 Hz C. 3400 Hz D. 1000 Hz

Last Answer : A. 800 Hz

It is the thermal noise power normalized to 1- Hz bandwidth:

Description : It is the thermal noise power normalized to 1- Hz bandwidth:

Last Answer : noise power density

A multimeter can be used to directly measure _____________. A. watts B. field flux C. current D. all of the above

Description : A multimeter can be used to directly measure _____________. A. watts B. field flux C. current D. all of the above

Last Answer : Answer: C

The intensity levels of whispering noise is:

Description : The intensity levels of whispering noise is:

Last Answer : The intensity levels of whispering noise is: A. 10-15 dB B. 20-40 dB C. 40-50dB D. 50-55dB

The noise from an airplane engine 100 ft from an observer is found to have an intensity of 45dB. What will be the intensity when the plane flies overhead at an altitude of 1 mi? A. 10.5 dB B. 34.5 dB C. 35 dB D. 20.5 dB

Description : The noise from an airplane engine 100 ft from an observer is found to have an intensity of 45dB. What will be the intensity when the plane flies overhead at an altitude of 1 mi? A. 10.5 dB B. 34.5 dB C. 35 dB D. 20.5 dB

Last Answer : A. 10.5 dB

During the decoding process, the A)intensity of the transmission becomes stronger. B)receiver attempts to convert signs into concepts and ideas. C)source attempts to convert signs into concepts and ideas. D)receiver filters noise from the feedback.

Description : During the decoding process, the A)intensity of the transmission becomes stronger. B)receiver attempts to convert signs into concepts and ideas. C)source attempts to convert signs into concepts and ideas. D)receiver filters noise from the feedback.

Last Answer : B)receiver attempts to convert signs into concepts and ideas.

What volume of the chamber is required to measure absorption coefficient at 100 Hz? A. 125 m3 B. 50 m3 C. 150 m3 D. 352 m3

Description : What volume of the chamber is required to measure absorption coefficient at 100 Hz? A. 125 m3 B. 50 m3 C. 150 m3 D. 352 m3

Last Answer : D. 352 m3

The power of a wave with electric field intensity of 3 units in air is a) 0.01 b) 0.03 c) 0.05 d) 0.07

Description : The power of a wave with electric field intensity of 3 units in air is a) 0.01 b) 0.03 c) 0.05 d) 0.07

Last Answer : a) 0.01

The electric field intensity of a field with velocity 10m/s and flux density of 2.8 units is a) 0.28 b) 28 c) 280 d) 10/2.8

Description : The electric field intensity of a field with velocity 10m/s and flux density of 2.8 units is a) 0.28 b) 28 c) 280 d) 10/2.8

Last Answer : b) 28

The total current density is given as 0.5i + j – 1.5k units. Find the curl of the magnetic field intensity. a) 0.5i – 0.5j + 0.5k b) 0.5i + j -1.5k c) i – j + k d) i + j – k

Description : The total current density is given as 0.5i + j – 1.5k units. Find the curl of the magnetic field intensity. a) 0.5i – 0.5j + 0.5k b) 0.5i + j -1.5k c) i – j + k d) i + j – k

Last Answer : b) 0.5i + j -1.5k

Calculate the conduction density of a material with resistivity of 0.02 units and electric intensity of 12 units. a) 300 b) 600 c) 50 d) 120

Description : Calculate the conduction density of a material with resistivity of 0.02 units and electric intensity of 12 units. a) 300 b) 600 c) 50 d) 120

Last Answer : b) 600