Should I varnish new wooden blinds?

Should I varnish new wooden blinds?
by

1 Answer

Answer :

No, you don't have to varnish them like you would a floor because that would get pretty messy. You can just purchase a light spray that will give them that great wooden finish look.
by

Related questions

Will plastic blinds last as long as wooden blinds?

Description : Will plastic blinds last as long as wooden blinds?

Last Answer : Although wooden blinds are more expensive, if you care for them properly by using a special finish, they will last much longer than vinyl.

Do wooden blinds have a longer life expectancy than vinyl blinds?

Description : Do wooden blinds have a longer life expectancy than vinyl blinds?

Last Answer : Wooden blinds will have a life expectancy twice as long as vinyl blinds.

Wooden vs. fabric roman blinds?

Description : Wooden vs. fabric roman blinds?

Last Answer : The best part about wooden blinds is that they are incredibly easy to clean. They typically only require a light dusting as well as the occasional polish. Fabric blinds are good for blocking a great deal of light.

How long after oiling wood can you varnish it?

Description : How long after oiling wood can you varnish it?

Last Answer : Depending on how dry the wood is, I would wait a week or so, depending on the temps. I am staining a redwood patio table right now and it is sucking up the stain like crazy. If the oil is ... be careful about toxicity. I wouldn't put the mice in the cage for several weeks after finishing the cage.

What is the most practical way to varnish a dowel-like piece?

Description : What is the most practical way to varnish a dowel-like piece?

Last Answer : Can you get a small screw eye into one end? That would allow you to suspend it from a hook.

Can you varnish over a decal?

Description : Can you varnish over a decal?

Last Answer : I would say it can't hurt, but I don't know for sure, it is just a hunch. What you can consider is this: Assuming that the decal is not that expensive (I don't know if they are or not ... when you varnish it (on something else than your chair, obviously), and the second one to finish you chair with.

Can you varnish over polished wood?

Description : Can you varnish over polished wood?

Last Answer : answer:My web searches for Fabulustre are turning up a metal polishing compound. Polishing compounds like this are very fine abrasive particles in a matrix of wax or grease. If this is what was used, then ... would adhere well to that, because it will still be able to enter the grain of the wood.

Do you know of any quality paint pens that don't bleed when varnish is applied?

Description : Do you know of any quality paint pens that don't bleed when varnish is applied?

Last Answer : maybe the store you’re buying the pens at would know?

how far back should I cut back my pseuderanthemum black varnish plant for winter

Description : how far back should I cut back my pseuderanthemum black varnish plant for winter

Last Answer : Need Answer

How do I propagate a pseuderanthemum "Black Varnish" plant?

Description : How do I propagate a pseuderanthemum "Black Varnish" plant?

Last Answer : Need Answer

What is the ingredient needed to make all types of varnish ?

Description : What is the ingredient needed to make all types of varnish ?

Last Answer : Resin is the ingredient needed to make all types of varnish.

Does the sun damage the varnish?

Description : Does the sun bother the car?

Last Answer : Of course. After prolonged and repeated exposure to strong sunlight, the varnish partially fades and loses its shine

An egg of bird was coated with varnish and then incubated . The egg did not hatch because the developing embryo

Description : An egg of bird was coated with varnish and then incubated . The egg did not hatch because the developing embryo

Last Answer : An egg of bird was coated with varnish and then incubated . The egg did not hatch because the ... supply D. died because of toxic effect of varnish

How to Choose a Good Nail Varnish?

Description : How to Choose a Good Nail Varnish?

Last Answer : If you are going through the trouble of painting your nails, youdon't want the nail varnish chipping off within a few days or, evenworse, a few hours. But the cost difference between expensive andcheap ... cheap optionwill likely chip sooner, unless you cover with a good top coat.Plus, a cheap nail

How can I strip old sticky varnish off a chest of drawers?

Description : How can I strip old sticky varnish off a chest of drawers?

Last Answer : The DIY Network, HGTV, and all networks that host major home-improvement shows explain and demonstrate various tips on their Web sites. You can even watch people explain and demonstrate the processes for yourself, at YouTube: http://www.youtube.com

Lac is used in making (a) Gramophone records (b) Varnish (c) Sealing wax and lithographic ink (d) All the above

Description : Lac is used in making (a) Gramophone records (b) Varnish (c) Sealing wax and lithographic ink (d) All the above

Last Answer : Ans: (d)

Unnecessary and frequent applications of varnish to the generator windings to repair defective insulation will result in ____________. A. heavy coatings of varnish interfering with heat dissipation B. deficient air gap clearance and eventual damage to the casing C. failure of the rectifier assembly D. a built-up of varnish without changing generator operation

Description : Unnecessary and frequent applications of varnish to the generator windings to repair defective insulation will result in ____________. A. heavy coatings of varnish interfering with heat dissipation B. ... of the rectifier assembly D. a built-up of varnish without changing generator operation

Last Answer : Answer: A

Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the condition of the bearings C. provide for the correct proper tightening of the field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Description : Air gap readings should be taken periodicly on electrical generation equipment to __________. A. determine the amount of varnish that can be applied to correct insulation problems B. determine the ... field coil bolts and correct lateral adjustment of the field coils D. increase machine efficiency

Last Answer : Answer: B

Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. Compressed air should be blown over areas where dust is deposited. C. Spraying a solvent periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Description : Which of the following procedures should be used to maintain a large electric motor during periods of inactivity? A. A thin layer of air-drying varnish should be applied on the windings. B. ... periodically to remove carbon dust. D. Space heaters should be used to prevent condensation of moisture.

Last Answer : Answer: D

Which of the following statements best describes the material known as varnished cambric? A. Felted asbestos sealed with varnish. B. Cotton cloth coated with insulating varnish. C. Rubber insulation coated with a layer of tin. D. Paper impregnated with mineral oil, specially wrapped with nonmetallic tape, and coated with varnish.

Description : Which of the following statements best describes the material known as varnished cambric? A. Felted asbestos sealed with varnish. B. Cotton cloth coated with insulating varnish. C. Rubber ... Paper impregnated with mineral oil, specially wrapped with nonmetallic tape, and coated with varnish.

Last Answer : Answer: B

Electrical leads and insulation on a motor should be painted with ____________. A. heat-resisting acrylic B. heat-resisting aluminum C. insulating varnish D. insulating white lead

Description : Electrical leads and insulation on a motor should be painted with ____________. A. heat-resisting acrylic B. heat-resisting aluminum C. insulating varnish D. insulating white lead

Last Answer : Answer: C

The greatest detrimental effect on idle electrical equipment, such as cargo pump motors, is the _____________. A. loss of residual magnetism B. absorption of moisture in the insulation C. insulation varnish flaking D. dirt collecting on the windings

Description : The greatest detrimental effect on idle electrical equipment, such as cargo pump motors, is the _____________. A. loss of residual magnetism B. absorption of moisture in the insulation C. insulation varnish flaking D. dirt collecting on the windings

Last Answer : Answer: B

Alkyd resin cannot be used for making (A) Plasticiser (B) Paint & varnish (C) Fibres (D) Film forming materials

Description : Alkyd resin cannot be used for making (A) Plasticiser (B) Paint & varnish (C) Fibres (D) Film forming materials

Last Answer : (C) Fibres

Varnish does not contain (A) Thinner (B) Pigment (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Varnish does not contain (A) Thinner (B) Pigment (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Pigment

Varnish does not contain (A) Pigment (B) Thinner (C) Dryer (D) Anti-skimming agent

Description : Varnish does not contain (A) Pigment (B) Thinner (C) Dryer (D) Anti-skimming agent

Last Answer : (A) Pigmen

. Enamels (A) Give good glossy finish (B) Are same as varnish (C) Are prepared from non-drying oil (D) Do not contain pigment

Description : . Enamels (A) Give good glossy finish (B) Are same as varnish (C) Are prepared from non-drying oil (D) Do not contain pigment

Last Answer : (A) Give good glossy finish

Spirit varnish generally consists of (A) Oil, wax and resin (B) Alcohol, wax and turpentine (C) Pigment and synthetic resin (D) Spirit and shellac

Description : Spirit varnish generally consists of (A) Oil, wax and resin (B) Alcohol, wax and turpentine (C) Pigment and synthetic resin (D) Spirit and shellac

Last Answer : Answer: Option D

The most important constituent of varnish, is (A) Drier (B) Solvent (C) Resin (D) All the above

Description : The most important constituent of varnish, is (A) Drier (B) Solvent (C) Resin (D) All the above

Last Answer : Answer: Option D

The most durable varnish is (A) Water varnish (B) Spirit varnish (C) Turpentine varnish (D) Oil varnish

Description : The most durable varnish is (A) Water varnish (B) Spirit varnish (C) Turpentine varnish (D) Oil varnish

Last Answer : Answer: Option D

Varnish is a transparent or semi-transparent solution of resinous substances in (A) Alcohol (B) Linseed (C) Turpentine (D) All the above

Description : Varnish is a transparent or semi-transparent solution of resinous substances in (A) Alcohol (B) Linseed (C) Turpentine (D) All the above

Last Answer : Answer: Option D

French polish is (A) Oil paint (B) Distemper (C) Spirit varnish (D) None to these

Description : French polish is (A) Oil paint (B) Distemper (C) Spirit varnish (D) None to these

Last Answer : Answer: Option C

Lacquer is (A) Oil paint (B) Distemper (C) Spirit varnish (D) None to these

Description : Lacquer is (A) Oil paint (B) Distemper (C) Spirit varnish (D) None to these

Last Answer : Answer: Option C

To give a brilliant finish, the type of varnish used, is (A) Water varnish (B) Spirit varnish (C) Turpentine varnish (D) Oil varnish

Description : To give a brilliant finish, the type of varnish used, is (A) Water varnish (B) Spirit varnish (C) Turpentine varnish (D) Oil varnish

Last Answer : Answer: Option B

The vehicle used in case of enamel paints is usually (A) Linseed oil (B) Water (C) Varnish (D) None of these

Description : The vehicle used in case of enamel paints is usually (A) Linseed oil (B) Water (C) Varnish (D) None of these

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) Blistering may be cured by applying water paint finished with oil paint dried with a little copal varnish (B) Cracked paints may be cured by removing paint and giving a fresh coat of paint (C) Crawling paints may be cured by sand preparing the surface and giving a fresh coat with plenty of turps (D) All the above

Description : Pick up the correct statement from the following: (A) Blistering may be cured by applying water paint finished with oil paint dried with a little copal varnish (B) Cracked paints may be cured by ... sand preparing the surface and giving a fresh coat with plenty of turps (D) All the above

Last Answer : Answer: Option D

Oil varnish generally consists of (A) Synthetic resin and spirit (B) Oil, wax and resin (C) Resin, oil and turpentine (D) Spirit, oil and wax

Description : Oil varnish generally consists of (A) Synthetic resin and spirit (B) Oil, wax and resin (C) Resin, oil and turpentine (D) Spirit, oil and wax

Last Answer : Answer: Option C

PVC stands for (a) polyvinyl chloride (b) post varnish conductor (c) pressed and varnished cloth (d) positive voltage conductor (e) none of the above

Description : PVC stands for (a) polyvinyl chloride (b) post varnish conductor (c) pressed and varnished cloth (d) positive voltage conductor (e) none of the above

Last Answer : (a) polyvinyl chloride

While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Description : While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Last Answer : B. You extend your preparation and clean it

The function of varnish: A. To reduce initial marginal leakage “Short-term leakage” B. To prevent long term leakage

Description : The function of varnish: A. To reduce initial marginal leakage “Short-term leakage” B. To prevent long term leakage

Last Answer : A. To reduce initial marginal leakage “Short-term leakage”

In AC.S.R. conductors, the insulation between aluminium and steel conductors is (a) insulin (b) bitumen (c) varnish (d) no insulation is required

Description : In AC.S.R. conductors, the insulation between aluminium and steel conductors is (a) insulin (b) bitumen (c) varnish (d) no insulation is required

Last Answer : (d) no insulation is required

77 The transformer laminations are insulated from each other by A. Mica strip B. Thin coat of varnish C. Paper D. Any of the above

Description : 77 The transformer laminations are insulated from each other by A. Mica strip B. Thin coat of varnish C. Paper D. Any of the above

Last Answer : B. Thin coat of varnish

The insulating material used between the commutator segments is normally (a) graphite (b) paper (c) mica (d) insulating varnish

Description : The insulating material used between the commutator segments is normally (a) graphite (b) paper (c) mica (d) insulating varnish

Last Answer : Ans: c

State the properties of an ideal varnish.

Description : State the properties of an ideal varnish. 

Last Answer : 1. It should render the surface glossy. 2. It should dry rapidly / quickly. 3. It should form hard, durable, flexible film on painted surface. 4. It should not be affected by atmospheric action. 5. It should stick easily to surface. 6. It should not shrink / cracks after drying. 

Give one application of :(i) Mineral oil (ii) Varnish (iii) Synthetic oil (iv) Vegetable oil

Description : Give one application of :(i) Mineral oil (ii) Varnish (iii) Synthetic oil (iv) Vegetable oil 

Last Answer : i) Application of Mineral oil:  1. Used in transformer. 2. Used in switchgear 3. Used for circuit breaker 4. Used for capacitor 5. Used in paper insulated cables 6. It is used in Rector ii) ... Vegetable oil:  1. Used as a lubricant. 2. For illumination effect 3. Used for eating purpose. 

How do you clean blinds with ultrasound?

Description : How do you clean blinds with ultrasound?

Last Answer : It shakes the dirty off in a liquid using ultrasonics.

Shoppers: Is there a difference in quality between low-priced Venetian mini blinds and more expensive ones?

Description : Shoppers: Is there a difference in quality between low-priced Venetian mini blinds and more expensive ones?

Last Answer : I have found the cheap ones are just fine if you can get the color you want.

What are the advantages and disadvantages of large (conventional) venetian blinds and mini-blinds?

Description : What are the advantages and disadvantages of large (conventional) venetian blinds and mini-blinds?

Last Answer : Since it depends entirely on the location, size and use of the area, I suggest you visit the window covering section of your local home improvement store and discuss it with them. We have a great department at the Lowe’s near us.

How do I unfreeze my honeycomb blinds?

Description : How do I unfreeze my honeycomb blinds?

Last Answer : answer:You probably have a knot in the inner string somewhere. If you bought these from a reputable company, there should be a warranty. They'll send you a repair kit. You'll need to restring them & ... the pull cord even a small one will prevent you from being able to lower the blinds all the way.

What are the best inexpensive blinds to block out heat and reduce power bill?

Description : What are the best inexpensive blinds to block out heat and reduce power bill?

Last Answer : Cheaper than blinds: In the auto section of Wal-mart, you can buy “cut to size” auto window tint cling. It works very well, can be taken down & rolled up when you want to let in more light and takes up no space, so whatever window coverings you use will still look nice.