Name four die accessories and write their functions.

Name four die accessories and write their functions.
by

1 Answer

Answer :

Die Accessories:

1) Stripper: To remove scrap material from the punch as it cleans the die block.

2) Pilots: The pilot positions, the stock strip accurately and bring it into proper position for blanking and piercing operations. They act as guides during the piercing or blanking operations.

3) Stops: The stops are used for correct spacing of the sheet metal as it is fed below the punch to give the greatest output in given length of the plate.

4) Knock out: The function of knock out is to eject the finished components from the die cavity.

5) Strip Feeder: It is used for feeding the strip mostly in automatic operations.

6) Pressure Pad: It is used for drawing operation for maintaining flat surface of the cup. 
by

Related questions

State the functions of the following die accessories: pilots, stops, strippers, pressure pad.

Description : State the functions of the following die accessories: pilots, stops, strippers, pressure pad. 

Last Answer : Answer: Functions of die accessories. 1. Pilots: The pilot positions, the stock strip accurately and bring it into proper position for blanking and piercing operations. They act as guides during the ... 4. Pressure pad: It is used for drawing operation for maintaining flat surface of the cup. 

Describe briefly any two die accessories.

Description : Describe briefly any two die accessories.

Last Answer : 1. Stops: The stops are used for correct spacing of the sheet metal as it is fed below the punch to give the greatest output in given length of the plate. 2. Pilots: The pilot ... 5. Pressure pad: It is used for drawing operation for maintaining flat surface of the cup   

Enlist die accessories and state function of knock out

Description : Enlist die accessories and state function of knock out

Last Answer : Die Accessories are as follows: 1) Stops a)Button stop b) Lever stop 2) Pilot a)Direct pilot b)Indirect Pilot 3) Knock out 4) Strippers a) Fixed stripper b) Spring ... Pad Knock out: The function of knock out is to eject the finished components from the die cavity. 

Explain constructional features, and working of progressive die. Also state the functions of any four parts of progressive die.

Description : Explain constructional features, and working of progressive die. Also state the functions of any four parts of progressive die. 

Last Answer : Constructional features and Working of Progressive Die:  A progressive die consists of the following parts. 1. Stop 2. Sheet metal 3. Pilot 4. Blanking punch 5. Ram 6. Piercing ... 7. Piercing punch: The function of piercing punch is to produce punched holes into the sheet metal. 

Name four component of CNC machine and write their functions.

Description : Name four component of CNC machine and write their functions.

Last Answer : Components of CNC machines The various components of CNC system are :- 1) Program Input Device:- It is the medium of transmitting the part program to the computer. Three commonly used program input ... to facilitate a two way communication between the user, CNC system and the machine tool.

Draw the neat sketch of fly press. Give the functions of important parts of it.

Description : Draw the neat sketch of fly press. Give the functions of important parts of it. 

Last Answer : Answer: OR Functions of important parts of Fly Press. 1. Ram : This is main operating part of the press which works directly during processing of a workpiece. Ram ... : A die is a specialized tool used in manufacturing industries to cut or shape material mostly using a press 

Explain with sketch construction and application of progressive die.

Description : Explain with sketch construction and application of progressive die.

Last Answer : OR Construction A progressive die consists of the following parts.: 1. Stop 2. Sheet metal 3. Pilot 4. Blanking punch 5. Ram 6. Piercing punch 7. Stripper Plate 8. Die ... such as automotive, electronics and appliances. Example car brake caliper, washer, lid of a beverage can etc.

List the parts of standard die set.

Description : List the parts of standard die set.

Last Answer : 1)Die 2)Die Block 3)Lower Shoe 4)Punch 5)Upper Shoe  6)Back Up Plate 7)Stripper

State “Plane washer” making process with use of combination die.

Description : State “Plane washer” making process with use of combination die.

Last Answer : (Note: The plain washers can be produced by using Compound die or Progressive die. It is not possible to use combination die for making plain washers, so consider compound die or progressive die for answer. ... Stop 2.sheet metal 3.pilot 4.blanking punch 5.ram 6.piercing punch 7.stripper 8.die

Difference between compound and combination die.

Description : Difference between compound and combination die.

Last Answer : Compound die Combination die 1. Any two cutting operations can be performed at one station. 1. Both cutting and forming operations can be performed at one station. 2. Both operations performed in a ... operations performed. 5. e.g. washer 5. e.g. drawing cup shaped part.

Draw a neat sketch of progressive die.

Description : Draw a neat sketch of progressive die. 

Last Answer : progressive die

Explain the importance of pressure pads in a die with neat sketch.

Description : Explain the importance of pressure pads in a die with neat sketch.

Last Answer : Importance of Pressure pad:  It is used for drawing operation for maintaining flat surface of the cup. A pressure pad presses against the material during L bending or U bending, and is used for ... . There is also the purpose of stripping off the material from the punch after forming.

Explain simple die with neat sketch

Description : Explain simple die with neat sketch

Last Answer : Simple Die: Simple die or single action dies perform single operation for each stroke of the press slide. The operation may be cutting or forming operation such as blanking, punching, piercing etc. ... are simple in construction and can manufacture by conventional machining processes.    

Explain closed die forging with neat sketch

Description : Explain closed die forging with neat sketch

Last Answer : Impression die & Closed die forging process: Closed Die forging is also known as impression die forging. Close die forging process consist of specially prepared dies to manufacturing forged parts in large ... of accuracy. Complex shaped parts can be easily forged by this forging process.  

State the function of pilot and stopper in a die.

Description : State the function of pilot and stopper in a die.

Last Answer : Function of pilot and Stopper: Pilots: The pilot positions the stock strip accurately and bring it into proper position for blanking and piercing operations. They act as guides during the piercing or blanking ... it is fed below the punch to give the greatest output in given length of the plate. 

Draw neat sketch showing various parts of die set.

Description : Draw neat sketch showing various parts of die set. 

Last Answer : Answer: 1. Stop 2.Sheet metal 3.Pilot 4.Blanking punch 5.Ram 6.Piercing punch 7.Stripper 8.die Fig. Progressive Die OR

Draw neat sketch of compound die, showing various parts of it.

Description : Draw neat sketch of compound die, showing various parts of it.

Last Answer : Answer:

Differentiate between open die forging and close die forging.

Description : Differentiate between open die forging and close die forging.

Last Answer : Difference between open die and close die forging:

(i) Compare Open Die Forging and Close Die Forging. (ii) Explain with neat sketch process of Drop Forging.

Description : (i) Compare Open Die Forging and Close Die Forging. (ii) Explain with neat sketch process of Drop Forging.

Last Answer : (i) Difference between Open Die and Close Die Forging: (ii)Drop Forging  Drop forging is carried out by using drop hammers. They are board or gravity hammer, air lift hammer and power drop ... of upper and lower dies. The ram is fastened to the lower end of vertical hard wood board.

Sketch and explain a progressive die used to make washer.

Description : Sketch and explain a progressive die used to make washer.

Last Answer : Progressive Die: In a progressive die two or more operations are performed simultaneously at two or more stations with each press stroke by mounting separate sets of dies and punch. The metal is progressed ... locate it while the blanking punch descend and shear the plate to form a washer.  

Explain construction and working of Combination Die with neat sketch.

Description : Explain construction and working of Combination Die with neat sketch.

Last Answer : Combination Die: In this both cutting and non-cutting operations are performed at one station of the press in every stroke of the ram. Figure shows a combination of blanking and drawing die.In this ... as blank holder when the drawing punch descends and draws the blank into the desired shape.

List any four G codes, give their meaning.

Description : List any four G codes, give their meaning.  

Last Answer : Answer:

List types of welding flames used in Oxy-acetylene welding. Write their characteristics and applications.

Description : List types of welding flames used in Oxy-acetylene welding. Write their characteristics and applications.

Last Answer : Types of Flames: Characteristics Applications. 1)Neutral Flame: When oxygen and acetylene are supplied to the torch in nearly equal volumes, a neutral flame is produced. It has two ... cone of whitish colour. 3) Bluish outer cone High Carbon Steel, non - ferrous alloys,

Enlist any four forgeable materials.

Description : Enlist any four forgeable materials.

Last Answer : Following are the forgeable materials; Forgeable Materials:  1) Aluminium alloys 2) Magnesium alloys 3) Copper alloys. 4) Carbon and low alloy steels 5) Martensitic stainless steels 6) ... ) Columbium alloys 10) Tantalum alloys 11) Molybdenum alloys 12) Tungsten alloys 13) Beryllium.

List any four applications of forging process.

Description : List any four applications of forging process. 

Last Answer : Applications of Forging Process: 1. Connecting rod 2. Crankshaft 3. Camshaft 4. Spanner 5. Alloy wheel 6. Differential gears 7. Drive shafts 8. Clutch hubs 9. Universal joints 10. Hand Tools

Enlist any four operations carried out in forging process and explain fullering with neat sketch.

Description : Enlist any four operations carried out in forging process and explain fullering with neat sketch.

Last Answer : Operations carried out in forging process:  a) Upsetting b) Drawing Down c) Setting down d) Welding e) Bending f) Cutting g) Punching Fullering: In ... sledge hammer. The force is applied on the top fuller which results in decreasing the cross section at that point.

Define forgeability and give any four forgeable materials used to produce automotive components.

Description : Define forgeability and give any four forgeable materials used to produce automotive components.

Last Answer : Forgeability Forgeability can be defined as the tolerance of a metal or alloy for deformation without failure. OR Forgeability is defined as the ability of a metal to change size and shape when ... Columbium alloys 10) Tantalum alloys 11) Molybdenum alloys 12) Tungsten alloys 13) Beryllium.

List any four factors affecting selection of surface finishing processes.

Description : List any four factors affecting selection of surface finishing processes.

Last Answer : Following factors will affect the selection of surface finishing processes: 1. Material of component 2. Basic machining operation carried out on component 3. Dimensions of component 4. Final value (in µm) of machined surfaces 5. Application of machined surfaces 

Enlist any four pressing operations.

Description : Enlist any four pressing operations.

Last Answer : Pressing Operations are as follows: a) Blanking b) Punching c) Notching d) Perforating e) Trimming f) Shaving g) Slitting h) Lancing i) Bending j) Drawing k) Squeezing

Enlist any four forging components.

Description : Enlist any four forging components.

Last Answer : Forging Components:  1. Connecting rod  2. Crankshaft  3. Camshaft  4. Alloy wheel  5. Drive shafts  6. Clutch hubs  7. Universal joints  8. Hand Tools

List out any four applications of lapping and buffing.

Description : List out any four applications of lapping and buffing.

Last Answer : Applications of Lapping:  A. Hand lapping is used for i. Press work dies ii. Moulding dies iii. Limit gauges iv. Surface plates v. Engine valve and valve seat B. ... , bicycles, sporting items, tools, store fixtures, commercial and residential hardware and household utensils and appliances. 

Enlist any four merit and demerits of mechanical press

Description : Enlist any four merit and demerits of mechanical press

Last Answer : Merit :- 1. Machine structure is rational and small. 2. It is very easy to operate and it operate at a high utilization ratio. 3. Less cost of machine 4. Simple in construction. ... capacity. 3. Limited stroke length. 4. The force does not remain constant throughout the stroke.

List out any four characteristics of forged parts

Description : List out any four characteristics of forged parts 

Last Answer : 1) Forging produces predictable and uniform grain size and flow characteristics and has directional toughness. 2) Proper orientation of grains ensures the fatigue resistance and maximum impact strength. 3) Grain ... The forged parts have higher density. 6) The strength to weight ratio is high. 

Enlist any four demerits of VMC

Description : Enlist any four demerits of VMC 

Last Answer : 1) Need to knowledge of coding i.e difficult  2) need to proper skilled  workers 

Enlist any four demerits of soldering

Description : Enlist any four demerits of soldering

Last Answer : 1) Strength of soldered joint is low. 2) Soldered joint cannot be used in high temperature applications. 3) Limitation for joining large sections. 4) Careful removal of flux residual is required to prevent corrosion. 5) Flux may contain toxic components.

Enlist names of any four parts of automobile that can be manufactured by forging.

Description : Enlist names of any four parts of automobile that can be manufactured by forging.

Last Answer : Following are few automotive components that can be manufactured by forging Process: 1. Connecting rod 2. Crankshaft 3. Camshaft 4. Gears 5. Alloy wheel

State any four applications of resistance welding.

Description : State any four applications of resistance welding. 

Last Answer : Answer: Applications of resistance welding: 1. Resistance welding is widely used in automotive industries. 2. Projection welding is widely used in production of nut and bolt. Projection welding is ... welding is applied in manufacturing of wheel rims, wire joints and railway track joints etc. 

State the principle used in Lapping. List four applications of Lapping.

Description : State the principle used in Lapping. List four applications of Lapping.

Last Answer : Principle of Lapping: Lapping is basically an abrasive process in which loose abrasives function as cutting points finding momentary support of the lap. The process has the following features. (a) Use of ... roller bearings ii. Gears iii. Piston rings iv. Slip gauges v. Crankshaft.

Explain any four reference position used on CNC machines.

Description : Explain any four reference position used on CNC machines. 

Last Answer : Reference positions used on CNC machine:   There are three reference positions on CNC machine: 1. Machine zero point 2. Work zero point 3. Tool home position 4.Reference point 1. ... by limit switches. The slide positions are reported to the control by the slides approaching.

State four advantages and limitations of forging.

Description : State four advantages and limitations of forging.

Last Answer : Advantages of Forging: 1. Strength: i. Forging reduces the failures. ii. High strength to weight ratio. iii. It can be able to withstand fluctuating stress caused by sudden shock loading. ... be produced by forging. 8. Rapid oxidation of metal surface at high temperature wears the dies.

State four advantages of CNC machines over conventional machines.

Description : State four advantages of CNC machines over conventional machines.

Last Answer : Advantages of CNC machines over conventional machines: 1) Greater machine utilization. 2) Complex machining operations can be easily done. 3) It gives high degree of accuracy. 4) It requires less ... is reduced. 15) Elimination of special jigs and fixtures. 16) Accurate costing & scheduling. 

List four mechanical and chemical cleaning processes.

Description : List four mechanical and chemical cleaning processes.

Last Answer : Chemical Cleaning: 1. Alkaline cleaning 2. Acid pickling 3. Electrolytic cleaning 4. Emulsified solvent cleaning 5. Vapour degreasing 6. Ultrasonic cleaning Mechanical Cleaning: a. ... b. Tumbling c. Barrel rolling d. Power brushing e. Machine polishing & buffing

State four advantages of welding.

Description : State four advantages of welding.

Last Answer : Advantages of Welding Process: 1) It produce permanent joint. 2) Large number of metals can be welded. 3) Freedom in design. 4) Strong and tight joining 5) Cost effectiveness 6) Simplicity of welded structures design 7) Welding processes may be mechanized and automated.

Enlist four press components used in automobiles.

Description : Enlist four press components used in automobiles. 

Last Answer : The various Pressed Products used in Automobiles are: 1) Gears 2) Crank Shafts 3) Automobile panels 4) Wires 5) Frames and Chassis 6) Connecting Rods 7) Springs 8) Carburetor bodies 9) Valves 10) Combustion Chamber 11) Cylinder heads & blocks 12) Gear box cases etc.

List the four hand tools used in forging.

Description : List the four hand tools used in forging.

Last Answer : Hand Tools used in Forging: 1. Hammer 2. Rigid Anvil 3. Hearth 4. Tong 5. Fuller

Write down the sequence for manufacturing of crankshaft.

Description : Write down the sequence for manufacturing of crankshaft.

Last Answer : Forging Sequence for Manufacturing Crank Shaft: [1] Stock is redistributed and size is increased at certain place and reduced at other place by roll forging. [2] After preliminary roll forging, stock is ... 5] Then the finished part is then trimmed in blanking die to remove excess metal or flash. 

Write forging sequence for spanners.

Description : Write forging sequence for spanners.

Last Answer : Forging Sequence for Spanner: (1) The heated stock is elongated by reducing its cross section in first die. The operation is known as Fullering . (2) The metal is redistributed, increasing the cross ... . (5) Flash is removed. (6) Heat treatment and machining is done as per requirement. 

Write CNC program format with meaning of each term.

Description : Write CNC program format with meaning of each term.

Last Answer : N001 G01 X12345 Y06789 M03 EOB 1. N001 represents the sequence number of the operation. 2. G01 represents linear interpolation 3. X12345 will move the table 1.2345 in. in a positive direction along the X axis. ... in. along the Y axis. 5. M03 Spindle on CW. 6. EOB End of Block

Sketch and describe the following press operations: 1. Punching 2. Shearing and 3. Trimming

Description : Sketch and describe the following press operations: 1. Punching 2. Shearing and 3. Trimming

Last Answer : (i) Punching : In punching operation, a hole is the desired result. The size of hole is determined by the size of punch and clearance is allowed on the die. The figure shows the ... still hot for maximum efficiency; therefore it is usually incorporated into the larger production process.

Describe with sketch the surface treatment process used to built-up worn out metal components of automotive engines.

Description : Describe with sketch the surface treatment process used to built-up worn out metal components of automotive engines.

Last Answer : Metal spraying is to build-up worn out metal components of automotive engines.   Metal Spraying of metalizing literally means to treat with or coat with a metal or metallic compound. Metalizing as ... being coated, by compressed air. A sectional view of metal spraying gun is shown in fig.