Enlist any four forging components.

Enlist any four forging components.
by

1 Answer

Answer :

Forging Components:

 1. Connecting rod

 2. Crankshaft

 3. Camshaft

 4. Alloy wheel

 5. Drive shafts

 6. Clutch hubs

 7. Universal joints

 8. Hand Tools
by

Related questions

Enlist any four operations carried out in forging process and explain fullering with neat sketch.

Description : Enlist any four operations carried out in forging process and explain fullering with neat sketch.

Last Answer : Operations carried out in forging process:  a) Upsetting b) Drawing Down c) Setting down d) Welding e) Bending f) Cutting g) Punching Fullering: In ... sledge hammer. The force is applied on the top fuller which results in decreasing the cross section at that point.

Enlist names of any four parts of automobile that can be manufactured by forging.

Description : Enlist names of any four parts of automobile that can be manufactured by forging.

Last Answer : Following are few automotive components that can be manufactured by forging Process: 1. Connecting rod 2. Crankshaft 3. Camshaft 4. Gears 5. Alloy wheel

Enlist four press components used in automobiles.

Description : Enlist four press components used in automobiles. 

Last Answer : The various Pressed Products used in Automobiles are: 1) Gears 2) Crank Shafts 3) Automobile panels 4) Wires 5) Frames and Chassis 6) Connecting Rods 7) Springs 8) Carburetor bodies 9) Valves 10) Combustion Chamber 11) Cylinder heads & blocks 12) Gear box cases etc.

List any four applications of forging process.

Description : List any four applications of forging process. 

Last Answer : Applications of Forging Process: 1. Connecting rod 2. Crankshaft 3. Camshaft 4. Spanner 5. Alloy wheel 6. Differential gears 7. Drive shafts 8. Clutch hubs 9. Universal joints 10. Hand Tools

State four advantages and limitations of forging.

Description : State four advantages and limitations of forging.

Last Answer : Advantages of Forging: 1. Strength: i. Forging reduces the failures. ii. High strength to weight ratio. iii. It can be able to withstand fluctuating stress caused by sudden shock loading. ... be produced by forging. 8. Rapid oxidation of metal surface at high temperature wears the dies.

List the four hand tools used in forging.

Description : List the four hand tools used in forging.

Last Answer : Hand Tools used in Forging: 1. Hammer 2. Rigid Anvil 3. Hearth 4. Tong 5. Fuller

Enlist any four forgeable materials.

Description : Enlist any four forgeable materials.

Last Answer : Following are the forgeable materials; Forgeable Materials:  1) Aluminium alloys 2) Magnesium alloys 3) Copper alloys. 4) Carbon and low alloy steels 5) Martensitic stainless steels 6) ... ) Columbium alloys 10) Tantalum alloys 11) Molybdenum alloys 12) Tungsten alloys 13) Beryllium.

Enlist any four pressing operations.

Description : Enlist any four pressing operations.

Last Answer : Pressing Operations are as follows: a) Blanking b) Punching c) Notching d) Perforating e) Trimming f) Shaving g) Slitting h) Lancing i) Bending j) Drawing k) Squeezing

Enlist any four merit and demerits of mechanical press

Description : Enlist any four merit and demerits of mechanical press

Last Answer : Merit :- 1. Machine structure is rational and small. 2. It is very easy to operate and it operate at a high utilization ratio. 3. Less cost of machine 4. Simple in construction. ... capacity. 3. Limited stroke length. 4. The force does not remain constant throughout the stroke.

Enlist any four demerits of VMC

Description : Enlist any four demerits of VMC 

Last Answer : 1) Need to knowledge of coding i.e difficult  2) need to proper skilled  workers 

Enlist any four demerits of soldering

Description : Enlist any four demerits of soldering

Last Answer : 1) Strength of soldered joint is low. 2) Soldered joint cannot be used in high temperature applications. 3) Limitation for joining large sections. 4) Careful removal of flux residual is required to prevent corrosion. 5) Flux may contain toxic components.

Draw flatter and Fuller. State its use in forging.

Description : Draw flatter and Fuller. State its use in forging.

Last Answer : 1. Fuller: Use of Fuller: Fuller is a forging tool, used to spread the metal. The fuller is placed against the metal stock, and then either the fuller or the stock is struck ... are used to give smoothness and accuracy to articles which have already been shaped by fullers and swages. 

Explain drop forging with neat sketch.

Description : Explain drop forging with neat sketch. 

Last Answer : Drop Forging Process: Drop forging is carried out by using drop hammers. They are board or gravity hammer, air lift hammer and power drop hammer. Anvil of drop forging hammer is attached to the frame ... [5] This energy will be delivered to the metal work-piece to produce plastic deformation.  

Describe briefly, hand forging and machine forging.

Description : Describe briefly, hand forging and machine forging. 

Last Answer : Hand Forging: [1] Hand forging is the oldest type of metal working process and has influenced the formation of other materials through the age. [2] Smith forging was formerly the process ... the height from which they fall, the higher will be intensity of blow the hammer will provide.

Write forging sequence for spanners.

Description : Write forging sequence for spanners.

Last Answer : Forging Sequence for Spanner: (1) The heated stock is elongated by reducing its cross section in first die. The operation is known as Fullering . (2) The metal is redistributed, increasing the cross ... . (5) Flash is removed. (6) Heat treatment and machining is done as per requirement. 

State any two advantages of forging process.

Description : State any two advantages of forging process. 

Last Answer : Advantages of forging processes: 1) Complex shaped parts can be forged 2) Mass production with greater accuracy is achieved. 3) It is very easy to maintain close tolerances. 4) ... highly skilled operator. 6) Better reproducibility. 7) Machining is not necessary to obtain final shape 

Classify forging. State Fullering

Description : Classify forging. State Fullering

Last Answer : Answer: Classification of forging processes 1.Open die forging: a) Hand forging b) Power forging: i. Hammer forging ii. Press forging 2.Close die forging: a) Drop forging b) ... The force is applied on the top fuller which results in decreasing the cross section at that point.  

Describe forging sequence for crank shaft.

Description : Describe forging sequence for crank shaft.

Last Answer : Forging Sequence for Manufacturing Crank Shaft: [1] Stock is redistributed and size is increased at certain place and reduced at other place by roll forging.   [2] After preliminary roll forging, stock ... the finished part is then trimmed in blanking die to remove excess metal or flash.   

Explain drop forging

Description : Explain drop forging

Last Answer : Drop Forging Process: Drop forging is carried out by using drop hammers. They are board or gravity hammer, air lift hammer and power drop hammer. Anvil of drop forging hammer is attached to the frame ... 5] This energy will be delivered to the metal work-piece to produce plastic deformation. 

Name forging defects.

Description : Name forging defects. 

Last Answer : 1. Cold shuts 2. Pitting 3. Die shift 4. Incomplete filling of dies 5. Dents 6. Flakes

Explain forging sequence for camshaft.

Description : Explain forging sequence for camshaft.

Last Answer : Forging process for manufacturing Camshaft: i) Stock is redistributed and size is increased at certain places & reduced at others by rolled forging. ii) after preliminary roll forging, the stock is ... v) finished part is trimmed in blanking die to remove excess metal or flash.

State the forging sequence for production of spanner.

Description : State the forging sequence for production of spanner.

Last Answer : Forging sequence for production of spanner Forging Sequence for Spanner: (1) The heated stock is elongated by reducing its cross section in first die. The operation is known as Fullering . (2) ... (5) Flash is removed. (6) Heat treatment and machining is done as per requirement.

What are the steps in drop forging?

Description : What are the steps in drop forging? 

Last Answer : Drop Forging Process:  Drop forging is carried out by using drop hammers. They are board or gravity hammer, air lift hammer and power drop hammer. Anvil of drop forging hammer is attached to the ... . [5] This energy will be delivered to the metal work-piece to produce plastic deformation. 

Explain closed die forging with neat sketch

Description : Explain closed die forging with neat sketch

Last Answer : Impression die & Closed die forging process: Closed Die forging is also known as impression die forging. Close die forging process consist of specially prepared dies to manufacturing forged parts in large ... of accuracy. Complex shaped parts can be easily forged by this forging process.  

Explain press forging with neat sketch.

Description : Explain press forging with neat sketch. 

Last Answer : Press Forging: In press forging, impression dies are used in which partd are made by plastically deforming a metal blank into die avities by slow squeezing action. The forging pressure builds up from the ... they are generally employed for non-ferrous alloys weighting from upto about 135 N. 

Give detail classification of forging processes.

Description : Give detail classification of forging processes. 

Last Answer : Classification of forging processes :  1.Open die forging: a) Hand forging b) Power forging:  i. Hammer forging  ii. Press forging 2.Close die forging: a) Drop forging b) Press forging c) Machine forging

Differentiate between open die forging and close die forging.

Description : Differentiate between open die forging and close die forging.

Last Answer : Difference between open die and close die forging:

Explain forging process used to manufacture the spanners.

Description : Explain forging process used to manufacture the spanners. 

Last Answer : Answer: Forging process used for production of spanner: 1) Fullering -The heated stock is elongated by reducing its cross section in first die.  2) Edging- The metal is redistributed, ... Trimming: Flash is removed   (6) Heat treatment and machining is done as per requirement.   

State various advantages and limitations of forging processes.

Description : State various advantages and limitations of forging processes. 

Last Answer : Answer: Advantages of forging processes  1) Complex shaped parts can be forged 2) Mass production with greater accuracy is achieved. 3) It is very easy to maintain close tolerances. 4) ... cannot be produced by forging. 8) Rapid oxidation of metal surface at high temperature wears the dies 

Define forgeability. Name any two materials that are used in forging.

Description : Define forgeability. Name any two materials that are used in forging. 

Last Answer : Forgeability: Forgeability can be defined as the tolerance of a metal or alloy for deformation without failure. OR  Forgeability is defined as the ability of a metal to change size and shape when heated to ... 10) Tantalum alloys 11) Molybdenum alloys 12) Tungsten alloys 13) Beryllium.

(i) Compare Open Die Forging and Close Die Forging. (ii) Explain with neat sketch process of Drop Forging.

Description : (i) Compare Open Die Forging and Close Die Forging. (ii) Explain with neat sketch process of Drop Forging.

Last Answer : (i) Difference between Open Die and Close Die Forging: (ii)Drop Forging  Drop forging is carried out by using drop hammers. They are board or gravity hammer, air lift hammer and power drop ... of upper and lower dies. The ram is fastened to the lower end of vertical hard wood board.

Draw the simple labeled sketches showing forging sequence for manufacturing Gears.

Description : Draw the simple labeled sketches showing forging sequence for manufacturing Gears.

Last Answer : Forging Sequence for Manufacturing Gears: i) The size of the heated stock is reduced with compensation of its length i.e. Upsetting is carried out.  ii) After heading or upsetting, stock is ... next impression or blocking die   iv) Then the finished part is trimmed in blanking die  

Classify Forging processes.

Description : Classify Forging processes.

Last Answer : Classification of forging process - I. Open Die Forging: (a) Hand forging (b) Power forging: i. Hammer forging ii. Press forging Ii. Close Die Forging: (a) Drop forging (b) Press forging (c) Machine forging OR

Draw simple labeled sketch showing forging sequence for manufacturing Crank Shaft.

Description : Draw simple labeled sketch showing forging sequence for manufacturing Crank Shaft.

Last Answer : Forging Sequence for Manufacturing Crank Shaft: [1] Stock is redistributed and size is increased at certain place and reduced at other place by roll forging. [2] After preliminary roll forging, ... Then the finished part is then trimmed in blanking die to remove excess metal or flash.   

Compare drop forging and press forging.

Description : Compare drop forging and press forging. 

Last Answer : Comparison of Drop Forging and Press Forging: 

Explain the term ‘Draft’ related to forging.

Description : Explain the term ‘Draft’ related to forging.

Last Answer : Draft — The necessary taper on the side of a forging to allow removal from the dies; also applies to the die impression. Commonly expressed in degrees as the draft angle.

Enlist press operations . Explain lancing and piercing.

Description : Enlist press operations . Explain lancing and piercing. 

Last Answer : Press Operations: [1] Cutting or Shearing Operations: Blanking, Punching, Piercing, Notching, perforating, trimming, shaving, slitting, lancing. [2] Bending Operation: Angle bending [3] Forming ... clearance is provided on the die. Figure shows punch and die set for piercing. 

Enlist die accessories and state function of knock out

Description : Enlist die accessories and state function of knock out

Last Answer : Die Accessories are as follows: 1) Stops a)Button stop b) Lever stop 2) Pilot a)Direct pilot b)Indirect Pilot 3) Knock out 4) Strippers a) Fixed stripper b) Spring ... Pad Knock out: The function of knock out is to eject the finished components from the die cavity. 

Describe buffing process and enlist its any two applications.

Description : Describe buffing process and enlist its any two applications.

Last Answer : Buffing process :- Buffing is used to give a much higher, lustrous, reflective finish that cannot be obtained by polishing. The buffing process consists in applying very fine abrasives with ... , tools, store fixtures, commercial and residential hardware and household utensils and appliances.

Define soldering process and enlist any two applications.

Description : Define soldering process and enlist any two applications.

Last Answer : Soldering: Soldering is a method of joining two or more piece of metal by means of a fusible alloy or metal, called solder, applied in the molten state. Applications: 1. Circuitry ... gutters, 9. Refrigeration and plumbing machine tools components, 10. Copper foil in stained glass work.

Enlist the different materials used in press work for automobile application.

Description : Enlist the different materials used in press work for automobile application. 

Last Answer : Answer: Materials used in press work  1) Aluminium, 2) copper, 3) brass, 4) mild steel, 5) Galvanized iron (G.I) sheets, 6) Duralumin, 7) Y-alloys, 8) naval brass, 9 ... ) Babbitt metal, 11) stainless steel & its alloys, 12) Different types of steels & its alloys.

Define forgeability and give any four forgeable materials used to produce automotive components.

Description : Define forgeability and give any four forgeable materials used to produce automotive components.

Last Answer : Forgeability Forgeability can be defined as the tolerance of a metal or alloy for deformation without failure. OR Forgeability is defined as the ability of a metal to change size and shape when ... Columbium alloys 10) Tantalum alloys 11) Molybdenum alloys 12) Tungsten alloys 13) Beryllium.

Describe with sketch the surface treatment process used to built-up worn out metal components of automotive engines.

Description : Describe with sketch the surface treatment process used to built-up worn out metal components of automotive engines.

Last Answer : Metal spraying is to build-up worn out metal components of automotive engines.   Metal Spraying of metalizing literally means to treat with or coat with a metal or metallic compound. Metalizing as ... being coated, by compressed air. A sectional view of metal spraying gun is shown in fig.  

List the materials used in press work for automobile components parts with example.

Description : List the materials used in press work for automobile components parts with example.

Last Answer : Materials used in press work: 1) Aluminium, 2) Copper, 3) Brass, 4) Mild Steel, 5) Galvanized iron (G.I) sheets, 6) Duralumin, 7) Y-alloys, 8) Naval Brass, 9) Cartridge Brass, ... 8) Carburettor bodies 9) Valves 10) Combustion Chamber 11) Cylinder heads , blocks,  12) Gear box cases

What are the factors considered while selecting the components for machining on CNC machines?

Description : What are the factors considered while selecting the components for machining on CNC machines?

Last Answer : Following are the factors to be considered in selecting components of CNC machines? 1. High precision and repeatability. 2. Reliability. 3. Efficiency -To meet the requirement of high precision. ... should be such that removal of swarf is easy and the chips do not fall on the slideways.

List the components of NC machines.

Description : List the components of NC machines.

Last Answer : Components of NC Machines: 1. Program input device  2. Memory storage 3. Microprocessor 4. Machine control Unit (MCU) 5. Drive system 6. Machine Tool 7. Feedback system 8. Programmable logic controller (PLC) 9. Machine control panel 10. Operator control panel 11. Tape Reader

State different methods by which forged components can be made.

Description : State different methods by which forged components can be made. 

Last Answer : Answer: Different types of forging method - I. Open die forging: a) Hand forging b) Power forging: i. Hammer forging ii. Press forging II. Close die forging: a) Drop forging b) Press forging c) Machine forging OR

List any four factors affecting selection of surface finishing processes.

Description : List any four factors affecting selection of surface finishing processes.

Last Answer : Following factors will affect the selection of surface finishing processes: 1. Material of component 2. Basic machining operation carried out on component 3. Dimensions of component 4. Final value (in µm) of machined surfaces 5. Application of machined surfaces 

List out any four applications of lapping and buffing.

Description : List out any four applications of lapping and buffing.

Last Answer : Applications of Lapping:  A. Hand lapping is used for i. Press work dies ii. Moulding dies iii. Limit gauges iv. Surface plates v. Engine valve and valve seat B. ... , bicycles, sporting items, tools, store fixtures, commercial and residential hardware and household utensils and appliances. 

List out any four characteristics of forged parts

Description : List out any four characteristics of forged parts 

Last Answer : 1) Forging produces predictable and uniform grain size and flow characteristics and has directional toughness. 2) Proper orientation of grains ensures the fatigue resistance and maximum impact strength. 3) Grain ... The forged parts have higher density. 6) The strength to weight ratio is high.