Enlist any four merit and demerits of mechanical press

Enlist any four merit and demerits of mechanical press
by

1 Answer

Answer :

Merit :-

1. Machine structure is rational and small.

2. It is very easy to operate and it operate at a high utilization ratio.

3. Less cost of machine

4. Simple in construction.

Demerit:-

1. The large no. of relative moving parts and subjected wear & tear.

2. Relatively limited tonnage capacity.

3. Limited stroke length.

4. The force does not remain constant throughout the stroke.


by

Related questions

Enlist any four demerits of VMC

Description : Enlist any four demerits of VMC 

Last Answer : 1) Need to knowledge of coding i.e difficult  2) need to proper skilled  workers 

Enlist any four demerits of soldering

Description : Enlist any four demerits of soldering

Last Answer : 1) Strength of soldered joint is low. 2) Soldered joint cannot be used in high temperature applications. 3) Limitation for joining large sections. 4) Careful removal of flux residual is required to prevent corrosion. 5) Flux may contain toxic components.

Enlist four press components used in automobiles.

Description : Enlist four press components used in automobiles. 

Last Answer : The various Pressed Products used in Automobiles are: 1) Gears 2) Crank Shafts 3) Automobile panels 4) Wires 5) Frames and Chassis 6) Connecting Rods 7) Springs 8) Carburetor bodies 9) Valves 10) Combustion Chamber 11) Cylinder heads & blocks 12) Gear box cases etc.

Enlist press operations . Explain lancing and piercing.

Description : Enlist press operations . Explain lancing and piercing. 

Last Answer : Press Operations: [1] Cutting or Shearing Operations: Blanking, Punching, Piercing, Notching, perforating, trimming, shaving, slitting, lancing. [2] Bending Operation: Angle bending [3] Forming ... clearance is provided on the die. Figure shows punch and die set for piercing. 

Enlist the different materials used in press work for automobile application.

Description : Enlist the different materials used in press work for automobile application. 

Last Answer : Answer: Materials used in press work  1) Aluminium, 2) copper, 3) brass, 4) mild steel, 5) Galvanized iron (G.I) sheets, 6) Duralumin, 7) Y-alloys, 8) naval brass, 9 ... ) Babbitt metal, 11) stainless steel & its alloys, 12) Different types of steels & its alloys.

Enlist any four forgeable materials.

Description : Enlist any four forgeable materials.

Last Answer : Following are the forgeable materials; Forgeable Materials:  1) Aluminium alloys 2) Magnesium alloys 3) Copper alloys. 4) Carbon and low alloy steels 5) Martensitic stainless steels 6) ... ) Columbium alloys 10) Tantalum alloys 11) Molybdenum alloys 12) Tungsten alloys 13) Beryllium.

Enlist any four operations carried out in forging process and explain fullering with neat sketch.

Description : Enlist any four operations carried out in forging process and explain fullering with neat sketch.

Last Answer : Operations carried out in forging process:  a) Upsetting b) Drawing Down c) Setting down d) Welding e) Bending f) Cutting g) Punching Fullering: In ... sledge hammer. The force is applied on the top fuller which results in decreasing the cross section at that point.

Enlist any four pressing operations.

Description : Enlist any four pressing operations.

Last Answer : Pressing Operations are as follows: a) Blanking b) Punching c) Notching d) Perforating e) Trimming f) Shaving g) Slitting h) Lancing i) Bending j) Drawing k) Squeezing

Enlist any four forging components.

Description : Enlist any four forging components.

Last Answer : Forging Components:  1. Connecting rod  2. Crankshaft  3. Camshaft  4. Alloy wheel  5. Drive shafts  6. Clutch hubs  7. Universal joints  8. Hand Tools

Enlist names of any four parts of automobile that can be manufactured by forging.

Description : Enlist names of any four parts of automobile that can be manufactured by forging.

Last Answer : Following are few automotive components that can be manufactured by forging Process: 1. Connecting rod 2. Crankshaft 3. Camshaft 4. Gears 5. Alloy wheel

List four mechanical and chemical cleaning processes.

Description : List four mechanical and chemical cleaning processes.

Last Answer : Chemical Cleaning: 1. Alkaline cleaning 2. Acid pickling 3. Electrolytic cleaning 4. Emulsified solvent cleaning 5. Vapour degreasing 6. Ultrasonic cleaning Mechanical Cleaning: a. ... b. Tumbling c. Barrel rolling d. Power brushing e. Machine polishing & buffing

Enlist die accessories and state function of knock out

Description : Enlist die accessories and state function of knock out

Last Answer : Die Accessories are as follows: 1) Stops a)Button stop b) Lever stop 2) Pilot a)Direct pilot b)Indirect Pilot 3) Knock out 4) Strippers a) Fixed stripper b) Spring ... Pad Knock out: The function of knock out is to eject the finished components from the die cavity. 

Describe buffing process and enlist its any two applications.

Description : Describe buffing process and enlist its any two applications.

Last Answer : Buffing process :- Buffing is used to give a much higher, lustrous, reflective finish that cannot be obtained by polishing. The buffing process consists in applying very fine abrasives with ... , tools, store fixtures, commercial and residential hardware and household utensils and appliances.

Define soldering process and enlist any two applications.

Description : Define soldering process and enlist any two applications.

Last Answer : Soldering: Soldering is a method of joining two or more piece of metal by means of a fusible alloy or metal, called solder, applied in the molten state. Applications: 1. Circuitry ... gutters, 9. Refrigeration and plumbing machine tools components, 10. Copper foil in stained glass work.

Sketch and describe the following press operations: 1. Punching 2. Shearing and 3. Trimming

Description : Sketch and describe the following press operations: 1. Punching 2. Shearing and 3. Trimming

Last Answer : (i) Punching : In punching operation, a hole is the desired result. The size of hole is determined by the size of punch and clearance is allowed on the die. The figure shows the ... still hot for maximum efficiency; therefore it is usually incorporated into the larger production process.

Draw neat labeled sketch of ply press.

Description : Draw neat labeled sketch of ply press.

Last Answer : sketch of ply press

List the materials used in press work for automobile components parts with example.

Description : List the materials used in press work for automobile components parts with example.

Last Answer : Materials used in press work: 1) Aluminium, 2) Copper, 3) Brass, 4) Mild Steel, 5) Galvanized iron (G.I) sheets, 6) Duralumin, 7) Y-alloys, 8) Naval Brass, 9) Cartridge Brass, ... 8) Carburettor bodies 9) Valves 10) Combustion Chamber 11) Cylinder heads , blocks,  12) Gear box cases

Explain the following press operations (a) Punching (b) Drawing

Description : Explain the following press operations (a) Punching (b) Drawing

Last Answer : a) Punching: In punching operation, a hole is the desired result. The size of hole is determined by the size of punch and clearance is allowed on the die. The figure shows the spacing of hole on plate2 ... between punch and die is greater. [5] The drawing operation is illustrated in Fig.  

Name the types of dies used in press work. Explain any one with neat sketch.

Description : Name the types of dies used in press work. Explain any one with neat sketch.

Last Answer : The various types dies used in press work are: 1. Types of dies according to operations performed (i) Shearing (ii) Bending (iii) Drawing (iv) Squeezing 2. Types of ... giving output. These dies are simple in construction and can manufacture by conventional machining processes.     

Name the different types of presses used in industry. State the working principle of press.

Description : Name the different types of presses used in industry. State the working principle of press. 

Last Answer : Types of presses used in industry: According to Source of power to ram: 1. Crank 2. Cam 3. Eccentric 4. Power screw 5. Rack and pinion 6. Toggle 7. ... ) hydraulic, mechanical, pneumatic and respectively working on principle of Pascal law, Mechanical Pressure and Pneumatic Pressure.

Explain material used in press work for automobile applications

Description : Explain material used in press work for automobile applications

Last Answer : Answer:  Materials used in press work 1) Aluminium, 2) copper, 3) brass, 4) mild steel, 5) Galvanized iron (G.I) sheets, 6) Duralumin, 7) Y-alloys, 8) naval brass, 9) cartridge brass, 10) Babbitt metal, 11) stainless steel & its alloys, 12) Different types of steels & its alloys. 

Explain fly press with neat sketch.

Description : Explain fly press with neat sketch.

Last Answer : Fly Press : [1] It is simplest type of all presses, called as hand press / ball press/single side fly press. [2] It consists of robust cast iron frame. Top portion of frame forms the nut ... adjusted with help of Stop Collar / Arrestor. Advance type of fly press is double side Press. 

Explain blanking and piercing operation performed by press.

Description : Explain blanking and piercing operation performed by press. 

Last Answer : Blanking: The blanking is the operation of cutting of flat sheet to the desired shape. The piece detached from strip is known a blank. The metal punched out is the required product and the plate with the ... hole and clearance is provided on the die. Fig. shows punch and die set for piercing.  

Draw the neat sketch of fly press. Give the functions of important parts of it.

Description : Draw the neat sketch of fly press. Give the functions of important parts of it. 

Last Answer : Answer: OR Functions of important parts of Fly Press. 1. Ram : This is main operating part of the press which works directly during processing of a workpiece. Ram ... : A die is a specialized tool used in manufacturing industries to cut or shape material mostly using a press 

Explain press forging with neat sketch.

Description : Explain press forging with neat sketch. 

Last Answer : Press Forging: In press forging, impression dies are used in which partd are made by plastically deforming a metal blank into die avities by slow squeezing action. The forging pressure builds up from the ... they are generally employed for non-ferrous alloys weighting from upto about 135 N. 

Explain Blanking operation on press with neat sketch.

Description : Explain Blanking operation on press with neat sketch.

Last Answer : Blanking Operation:  1. It is the operation of cutting of flat sheet to the desired shape.  2. The metal punched out (i.e. blank) is the required product & the plate with hole left on ... is governed by size of die and the clearance left on the punch.  Fig. shows blanking operation

Explain drawing operation on press with neat sketch.

Description : Explain drawing operation on press with neat sketch.

Last Answer : Drawing Operation:  1. The drawing is the operation of production of cup shaped parts from flat sheet metal blanks by bending and plastic flow of the metal.  2. The blank is placed on die ... , clearance between punch and die is greater. The drawing operation is illustrated in Fig. 

Specify a Press Size required for sheet metal work.

Description : Specify a Press Size required for sheet metal work.

Last Answer : Specification of Press Size: Shut Height- The space available between the press bed or bolster and the slide or ram is called the shut height. It is always measured with the press shut or ... motion. Stroke length relates to speed ranges, the longer the stroke the slower the press speed range.

Compare drop forging and press forging.

Description : Compare drop forging and press forging. 

Last Answer : Comparison of Drop Forging and Press Forging: 

Explain chemical method of classification of crude drug with its merit and demerits.

Description : Explain chemical method of classification of crude drug with its merit and demerits. 

Last Answer : Chemical method of classification of crude drug: This type of classification is based on type of chemicals present in the drugs. Class Examples ... two or more active chemical constituents 2. The drugs from various sources are grouped together.

Enlist Merits(Advantages) and demerits(Disadvantages) of Pneumatic system

Description : Enlist Merits(Advantages) and demerits(Disadvantages) of Pneumatic system

Last Answer : Advantages of pneumatic system : 1.Easily available air - The working medium used by pneumatic system is easily and freely available everywhere. 2.Neat and clean system - Due to air being working medium ... is no load on the system where as in hydraulics pressure is developed due to external load. 

Enlist Merits and demerits of Hydraulic system

Description : Enlist Merits and demerits of Hydraulic system

Last Answer : Merits of Hydraulic system  1) We can generate very high pressures in hydraulic system. Due to this nature of hydraulic system we can use this power to lift, hold, press very heavy loads. 2) ... its flash point' 4) Leakage of hydraulic oil during its flow in system causes heavy pressure drops

List any four applications of forging process.

Description : List any four applications of forging process. 

Last Answer : Applications of Forging Process: 1. Connecting rod 2. Crankshaft 3. Camshaft 4. Spanner 5. Alloy wheel 6. Differential gears 7. Drive shafts 8. Clutch hubs 9. Universal joints 10. Hand Tools

Define forgeability and give any four forgeable materials used to produce automotive components.

Description : Define forgeability and give any four forgeable materials used to produce automotive components.

Last Answer : Forgeability Forgeability can be defined as the tolerance of a metal or alloy for deformation without failure. OR Forgeability is defined as the ability of a metal to change size and shape when ... Columbium alloys 10) Tantalum alloys 11) Molybdenum alloys 12) Tungsten alloys 13) Beryllium.

List any four factors affecting selection of surface finishing processes.

Description : List any four factors affecting selection of surface finishing processes.

Last Answer : Following factors will affect the selection of surface finishing processes: 1. Material of component 2. Basic machining operation carried out on component 3. Dimensions of component 4. Final value (in µm) of machined surfaces 5. Application of machined surfaces 

List out any four applications of lapping and buffing.

Description : List out any four applications of lapping and buffing.

Last Answer : Applications of Lapping:  A. Hand lapping is used for i. Press work dies ii. Moulding dies iii. Limit gauges iv. Surface plates v. Engine valve and valve seat B. ... , bicycles, sporting items, tools, store fixtures, commercial and residential hardware and household utensils and appliances. 

List out any four characteristics of forged parts

Description : List out any four characteristics of forged parts 

Last Answer : 1) Forging produces predictable and uniform grain size and flow characteristics and has directional toughness. 2) Proper orientation of grains ensures the fatigue resistance and maximum impact strength. 3) Grain ... The forged parts have higher density. 6) The strength to weight ratio is high. 

Explain constructional features, and working of progressive die. Also state the functions of any four parts of progressive die.

Description : Explain constructional features, and working of progressive die. Also state the functions of any four parts of progressive die. 

Last Answer : Constructional features and Working of Progressive Die:  A progressive die consists of the following parts. 1. Stop 2. Sheet metal 3. Pilot 4. Blanking punch 5. Ram 6. Piercing ... 7. Piercing punch: The function of piercing punch is to produce punched holes into the sheet metal. 

List any four G codes, give their meaning.

Description : List any four G codes, give their meaning.  

Last Answer : Answer:

State any four applications of resistance welding.

Description : State any four applications of resistance welding. 

Last Answer : Answer: Applications of resistance welding: 1. Resistance welding is widely used in automotive industries. 2. Projection welding is widely used in production of nut and bolt. Projection welding is ... welding is applied in manufacturing of wheel rims, wire joints and railway track joints etc. 

State the principle used in Lapping. List four applications of Lapping.

Description : State the principle used in Lapping. List four applications of Lapping.

Last Answer : Principle of Lapping: Lapping is basically an abrasive process in which loose abrasives function as cutting points finding momentary support of the lap. The process has the following features. (a) Use of ... roller bearings ii. Gears iii. Piston rings iv. Slip gauges v. Crankshaft.

Explain any four reference position used on CNC machines.

Description : Explain any four reference position used on CNC machines. 

Last Answer : Reference positions used on CNC machine:   There are three reference positions on CNC machine: 1. Machine zero point 2. Work zero point 3. Tool home position 4.Reference point 1. ... by limit switches. The slide positions are reported to the control by the slides approaching.

Name four component of CNC machine and write their functions.

Description : Name four component of CNC machine and write their functions.

Last Answer : Components of CNC machines The various components of CNC system are :- 1) Program Input Device:- It is the medium of transmitting the part program to the computer. Three commonly used program input ... to facilitate a two way communication between the user, CNC system and the machine tool.

Name four die accessories and write their functions.

Description : Name four die accessories and write their functions.

Last Answer : Die Accessories: 1) Stripper: To remove scrap material from the punch as it cleans the die block. 2) Pilots: The pilot positions, the stock strip accurately and bring it into proper position for ... . 6) Pressure Pad: It is used for drawing operation for maintaining flat surface of the cup. 

State four advantages and limitations of forging.

Description : State four advantages and limitations of forging.

Last Answer : Advantages of Forging: 1. Strength: i. Forging reduces the failures. ii. High strength to weight ratio. iii. It can be able to withstand fluctuating stress caused by sudden shock loading. ... be produced by forging. 8. Rapid oxidation of metal surface at high temperature wears the dies.

State four advantages of CNC machines over conventional machines.

Description : State four advantages of CNC machines over conventional machines.

Last Answer : Advantages of CNC machines over conventional machines: 1) Greater machine utilization. 2) Complex machining operations can be easily done. 3) It gives high degree of accuracy. 4) It requires less ... is reduced. 15) Elimination of special jigs and fixtures. 16) Accurate costing & scheduling. 

State four advantages of welding.

Description : State four advantages of welding.

Last Answer : Advantages of Welding Process: 1) It produce permanent joint. 2) Large number of metals can be welded. 3) Freedom in design. 4) Strong and tight joining 5) Cost effectiveness 6) Simplicity of welded structures design 7) Welding processes may be mechanized and automated.

List the four hand tools used in forging.

Description : List the four hand tools used in forging.

Last Answer : Hand Tools used in Forging: 1. Hammer 2. Rigid Anvil 3. Hearth 4. Tong 5. Fuller

Describe with sketch the surface treatment process used to built-up worn out metal components of automotive engines.

Description : Describe with sketch the surface treatment process used to built-up worn out metal components of automotive engines.

Last Answer : Metal spraying is to build-up worn out metal components of automotive engines.   Metal Spraying of metalizing literally means to treat with or coat with a metal or metallic compound. Metalizing as ... being coated, by compressed air. A sectional view of metal spraying gun is shown in fig.  

Explain the shielded metal arc welding (SMAW) processes with neat sketch. State its two advantages and disadvantages.

Description : Explain the shielded metal arc welding (SMAW) processes with neat sketch. State its two advantages and disadvantages.

Last Answer : Working  : Shielded metal arc welding uses a metallic consumable electrode of a proper composition for generating arc between itself and the parent work piece. The molten electrode metal fills the weld ... . 2. Weld may contain slag inclusions 3. Fumes make difficult the process control.