What is the line that cut a circle in two equal parts is known as?

What is the line that cut a circle in two equal parts is known as?
by

1 Answer

Answer :

chord
by

Related questions

Which of the following imaginary line almost divides India into two equal parts? A. Equator B. Tropic of Cancer C. Tropic of Capricorn D. Arctic Circle

Description : Which of the following imaginary line almost divides India into two equal parts? A. Equator B. Tropic of Cancer C. Tropic of Capricorn D. Arctic Circle

Last Answer : B. Tropic of Cancer

A wire of length a units is cut into two equal pieces and make a circle of radius r with one piece. Frame the formula by making r the subject.

Description : A wire of length a units is cut into two equal pieces and make a circle of radius r with one piece. Frame the formula by making r the subject.

Last Answer : A wire of length a units is cut into two equal pieces and make a circle of radius r with one piece. Frame the formula by making r the subject.

In the given figure, equal chords AB and CD of a circle with centre O cut at right angles at E. If M and N are the mid-points of AB and CD respectively, prove that OMEN is a square. -Maths 9th

Description : In the given figure, equal chords AB and CD of a circle with centre O cut at right angles at E. If M and N are the mid-points of AB and CD respectively, prove that OMEN is a square. -Maths 9th

Last Answer : Join OE. In ΔOME and ΔONE, OM =ON [equal chords are equidistant from the centre] ∠OME = ∠ONE = 90° OE =OE [common sides] ∠OME ≅ ∠ONE [by SAS congruency] ⇒ ME = NE [by CPCT] In quadrilateral OMEN, ... =ON , ME = NE and ∠OME = ∠ONE = ∠MEN = ∠MON = 90° Hence, OMEN is a square. Hence proved.

In the given figure, equal chords AB and CD of a circle with centre O cut at right angles at E. If M and N are the mid-points of AB and CD respectively, prove that OMEN is a square. -Maths 9th

Description : In the given figure, equal chords AB and CD of a circle with centre O cut at right angles at E. If M and N are the mid-points of AB and CD respectively, prove that OMEN is a square. -Maths 9th

Last Answer : Join OE. In ΔOME and ΔONE, OM =ON [equal chords are equidistant from the centre] ∠OME = ∠ONE = 90° OE =OE [common sides] ∠OME ≅ ∠ONE [by SAS congruency] ⇒ ME = NE [by CPCT] In quadrilateral OMEN, ... =ON , ME = NE and ∠OME = ∠ONE = ∠MEN = ∠MON = 90° Hence, OMEN is a square. Hence proved.

If two equal chords of a circle intersect, prove that the parts of one chord are separately equal to the parts of the other chord. -Maths 9th

Description : If two equal chords of a circle intersect, prove that the parts of one chord are separately equal to the parts of the other chord. -Maths 9th

Last Answer : Explanation of this question

If two equal chords of a circle intersect, prove that the parts of one chord are separately equal to the parts of the other chord. -Maths 9th

Description : If two equal chords of a circle intersect, prove that the parts of one chord are separately equal to the parts of the other chord. -Maths 9th

Last Answer : Explanation of this question

If a circle is divided into eight equal parts, find the angle subtended by each arc at the centre. -Maths 9th

Description : If a circle is divided into eight equal parts, find the angle subtended by each arc at the centre. -Maths 9th

Last Answer : Total angle at centre = 360° When divided into eight part, Angle subtended by each arc = 360 / n8 = 45°

A spring of stiffness constant k is cut in two equal parts. The stiffness constant of new spring will be k/2. a) True b) False

Description : A spring of stiffness constant k is cut in two equal parts. The stiffness constant of new spring will be k/2. a) True b) False

Last Answer : b) False

A close –coiled helical spring is cut into two equal parts. The stiffness of the resulting springs will be (a) same (b) double (c) half (d) One-fourth

Description : A close –coiled helical spring is cut into two equal parts. The stiffness of the resulting springs will be (a) same (b) double (c) half (d) One-fourth

Last Answer : (b) double

A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be – (1) nR (2) R/n (3) n/R (4) R/n²

Description : A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be – (1) nR (2) R/n (3) n/R (4) R/n²

Last Answer : (4) R/n² Explanation: Since R is directly proportional to length of the wire, when wire is cut into equal parts, then Resistance of each part = R/n

A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be

Description : A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be

Last Answer : R/n2

A point moves in such a manner that its distance from a fixed point is equal to its distance from a fixed line multiplied by a constant greater than one. The locus of the path traced by the point will be a a.Cycloid b.Hyperbola c.Circle d.Involute e.Ellipsc

Description : A point moves in such a manner that its distance from a fixed point is equal to its distance from a fixed line multiplied by a constant greater than one. The locus of the path traced by the point will be a a.Cycloid b.Hyperbola c.Circle d.Involute e.Ellipsc

Last Answer : d. Involute

If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the circle solve the following :

Description : If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the circle solve the following :

Last Answer : If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the ... D. `x^(2)+y^(2)+6x+1=0`

If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the circle solve the following :

Description : If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the circle solve the following :

Last Answer : If a given line is tangent to the circle then perpendicular distance from centre of the circle is equal to radius of the ... 0` D. `x^(2)+y^(2)-8y=0`

Which of the following is the locus of a point that moves in such a manner that its distance from a fixed point is equal to its distance from a fixed line multiplied by a constant greater than one (A) Ellipse (B) Hyperbola (C) Parabola (D) Circle

Description : Which of the following is the locus of a point that moves in such a manner that its distance from a  fixed point is equal to its distance from a fixed line multiplied by a constant greater than one  (A) Ellipse  (B) Hyperbola  (C) Parabola  (D) Circle 

Last Answer : (B) Hyperbola 

determining stresses in frames by methods of sections, the frame is divided into two parts by an imaginary section drawn in such a way as not to cut more than (A) Two members with unknown forces of the frame (B) Three members with unknown forces of the frame (C) Four members with unknown forces of the frame (D) Three members with known forces of the frame

Description : determining stresses in frames by methods of sections, the frame is divided into two parts by an imaginary section drawn in such a way as not to cut more than (A) Two members with unknown forces ... C) Four members with unknown forces of the frame (D) Three members with known forces of the frame

Last Answer : (B) Three members with unknown forces of the frame

A wire of length 28 m is to be cut into two pieces. One of the pieces is to be made into a square and the other into a circle. What should be the leng

Description : A wire of length 28 m is to be cut into two pieces. One of the pieces is to be made into a square and the other into a circle. What should be the leng

Last Answer : A wire of length 28 m is to be cut into two pieces. One of the pieces is to be made ... the combined area of the square and the circle is minimum?

Cut photo into a circle?

Description : Cut photo into a circle?

Last Answer : You can do this in Preview. Hold down the select button for a few seconds to show the drop down menu and you can select “Elliptical Selection”. It looks like this. Select what you want and choose Tools—> Crop.

When Abe cut a large circle out of a piece of heavy cardboard. He was going to use it to demonstrate something he had been studying to his Admiralty sister. He held the circle up so it was directly fa?

Description : When Abe cut a large circle out of a piece of heavy cardboard. He was going to use it to demonstrate something he had been studying to his Admiralty sister. He held the circle up so it was directly fa?

Last Answer : perceptual constancy

From a circular plate of diameter 6 cm is cut out a circle whose diameter is a radius of the plate. Find the e.g. of the remainder from the center of circular plate (A) 0.5 cm (B) 1.0 cm (C) 1.5 cm (D) 2.5 cm

Description : From a circular plate of diameter 6 cm is cut out a circle whose diameter is a radius of the plate. Find the e.g. of the remainder from the center of circular plate (A) 0.5 cm (B) 1.0 cm (C) 1.5 cm (D) 2.5 cm

Last Answer : (A) 0.5 cm

In the Perceptual Map each segment has a set of circles where: a. The inner fine cut circles have a radius of 4 units. b. The inner fine cut circles represent the heart of the segment where demand is strong. c. At the center of each inner fine cut circle is the ideal spot where demand is strongest. d. a and b. e. a, b and c.

Description : In the Perceptual Map each segment has a set of circles where: a. The inner fine cut circles have a radius of 4 units. b. The inner fine cut circles represent the heart of the segment where demand is strong. ... cut circle is the ideal spot where demand is strongest. d. a and b. e. a, b and c.

Last Answer : b. The inner fine cut circles represent the heart of the segment where demand is strong.

Which one of the following statements regarding preferred position in fine cut is false? a. Traditional customers want products located in the center of the circle. b. Low end customers want the newest technology at the cheapest price. c. High end customers want high performance and small size. d. Performance customers prefer higher performance levels. e. Size customers want smaller size.

Description : Which one of the following statements regarding preferred position in fine cut is false? a. Traditional customers want products located in the center of the circle. b. Low end customers want the ... . d. Performance customers prefer higher performance levels. e. Size customers want smaller size.

Last Answer : b. Low end customers want the newest technology at the cheapest price.

For positioning in the fine cut, which one is not right? a. Traditional preferred position is located in the center of circle. b. Low End preferred position is located upper left of circle. c. High End preferred Position is located in the lower left of the circle. d. Performance preferred position is located in the lower right of the circle. e. Size preferred position is located in the lower right of the circle.

Description : For positioning in the fine cut, which one is not right? a. Traditional preferred position is located in the center of circle. b. Low End preferred position is located upper left of circle. c. ... lower right of the circle. e. Size preferred position is located in the lower right of the circle.

Last Answer : c. High End preferred Position is located in the lower left of the circle.

Products must plot within ______ units from the center of the circle on the Perceptual Map to survive the rough cut. a. 3.0 b. 4.0 c. 1.0 d. 2.5

Description : Products must plot within ______ units from the center of the circle on the Perceptual Map to survive the rough cut. a. 3.0 b. 4.0 c. 1.0 d. 2.5

Last Answer : b. 4.0

Inside each fine cut circle, a. segments have an ideal spot where demand is at its highest. b. product segments strive to be in the center. c. product segments strive to be near the boundaries. d. demand is at its highest as long as product segments are within the circle. e. none of the above.

Description : Inside each fine cut circle, a. segments have an ideal spot where demand is at its highest. b. product segments strive to be in the center. c. product segments strive to be near the boundaries. d. demand is at its highest as long as product segments are within the circle. e. none of the above.

Last Answer : a. segments have an ideal spot where demand is at its highest. b. product segments strive to be in the center.

Circle graphs are used to show: (A) How various sections share in the whole (B) How various parts are related to the whole (C) How one whole is related to other wholes (D) How one part is related to other parts

Description : Circle graphs are used to show: (A) How various sections share in the whole (B) How various parts are related to the whole (C) How one whole is related to other wholes (D) How one part is related to other parts

Last Answer : Answer: B  A circle is the same as 360°. You can divide a circle into smaller portions. A pa rt of a circle is called an arc and an arc is named according to its angle. A circle graph, ... data. A circle graph is usually used to easily show the results of an investigation in a pr oportional manner.

Where is two and four fifths on a number line that is in 10 equal parts?

Description : Where is two and four fifths on a number line that is in 10 equal parts?

Last Answer : It depends upon WHERE the 10 equals parts start and finish.If both ends are greater than 2⅘ or both less than 2⅘ then 2⅘does NOT appear anywhere on the given number line.Otherwise it will appear at (2⅘ ... 8 marks alongthe line which would be at the eighth mark after the start labelled(2.8 or 2⅘).

Side AC of a right triangle ABC is divided into 8 equal parts. Seven line segments parallel to BC are drawn to AB from the points of division. -Maths 9th

Description : Side AC of a right triangle ABC is divided into 8 equal parts. Seven line segments parallel to BC are drawn to AB from the points of division. -Maths 9th

Last Answer : answer:

Points P, Q, R and S divide a line segment joining A (2, 6) and B (7, -4) in five equal parts. Find the coordinates of P and R. -Maths 9th

Description : Points P, Q, R and S divide a line segment joining A (2, 6) and B (7, -4) in five equal parts. Find the coordinates of P and R. -Maths 9th

Last Answer : this is the ans hope its clear

It is the part of a fraction below the line which tells how many equal parts there are in the whole or in the group?

Description : It is the part of a fraction below the line which tells how many equal parts there are in the whole or in the group?

Last Answer : It's the denominator

Points P,Q,R(in this order) divide the line joining the points A(-2,2) and B(2,8) into four equal parts. The coordinates of the point Q are: (a) (-1,7/2) (b) (1,13/2) (c) (0,5) (d) (5,1/2)

Description : Points P,Q,R(in this order) divide the line joining the points A(-2,2) and B(2,8) into four equal parts. The coordinates of the point Q are: (a) (-1,7/2) (b) (1,13/2) (c) (0,5) (d) (5,1/2)

Last Answer : (c) (0,5)

The portion of the brick cut across its width and having its length equal to that of a full brick, is known as (A) Closer (B) Queen closer (C) King closer (D) Prince closer

Description : The portion of the brick cut across its width and having its length equal to that of a full brick, is known as (A) Closer (B) Queen closer (C) King closer (D) Prince closer

Last Answer : Answer: Option B

The equal length of day and night on September 23rd in all parts of the world is known as - (1) Autumnal Equinox (2) Celestial Equinox (3) Winter Equinox (4) Vernal Equinox

Description : The equal length of day and night on September 23rd in all parts of the world is known as - (1) Autumnal Equinox (2) Celestial Equinox (3) Winter Equinox (4) Vernal Equinox

Last Answer : (1) Autumnal Equinox Explanation: Equinox means two days during the year, March 21 and September 23, when day and night are almost equal throughout the world because the Sun shines vertically on the Equator. March 21 is called vernal equinox and September 23 is called autumnal equinox.

The equal length of day and night on September 23rd in all parts of the world is known as (1) Autumnal Equinox (2) Celestial Equinox (3) Winter Equinox (4) Vernal Equinox

Description : The equal length of day and night on September 23rd in all parts of the world is known as (1) Autumnal Equinox (2) Celestial Equinox (3) Winter Equinox (4) Vernal Equinox

Last Answer : Autumnal Equinox

the word which means to cut into two parts is _____. -General Knowledge

Description : the word which means to cut into two parts is _____. -General Knowledge

Last Answer : The word which means to cut into two parts is Dichotomy.

Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (A) A smaller nut is tightened against main nut creating friction at the contacting surface

Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut

A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Last Answer : a. remains the same

Why are parts of my boxwood bush turning yellow/brown and should I cut those pieces out?

Description : Why are parts of my boxwood bush turning yellow/brown and should I cut those pieces out?

Last Answer : Need Answer

If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Last Answer : The answer is '6'

If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Last Answer : answer:

If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be? -General Knowledge

Last Answer : answer:

If a bar magnet is cut length wise into 3 parts, what will the total number of poles be?

Description : If a bar magnet is cut length wise into 3 parts, what will the total number of poles be?

Last Answer : 6