A machine performs 8 Joules of work in 2 seconds. How much power is delivered by this machine?

A machine performs 8 Joules of work in 2 seconds. How much power is delivered by this machine?
by

1 Answer

Answer :

ANSWER: 4 WATTS
by

Related questions

A current of 5 amps passes through a 10 ohm resistor. How many joules of energy will be generated by this resistor in 2 seconds?

Description : A current of 5 amps passes through a 10 ohm resistor. How many joules of energy will be generated by this resistor in 2 seconds? 

Last Answer : ANSWER: 500 JOULES

The potential difference across a 4 ohm resistor is 20 volts. Assuming that all of the energy dissipated by this resistor is in the form of heat, how many joules of heat are radiated in 10 seconds?

Description : The potential difference across a 4 ohm resistor is 20 volts. Assuming that all of the energy dissipated by this resistor is in the form of heat, how many joules of heat are radiated in 10 seconds?  

Last Answer : ANSWER: 1000 JOULES

An electric heater consumes 1000 Joules of energy in 5 seconds. Its power rating is: a) 200 W b) 1000 W c) 5000W d) none of the above

Description : An electric heater consumes 1000 Joules of energy in 5 seconds. Its power rating is: a) 200 W b) 1000 W c) 5000W d) none of the above

Last Answer : a) 200 W

A machine having an efficiency of 50% does 500 joules of work. Which of the following is the work input? Is it: w) 500 joules x) 250 joules y) 1000 joules z) 2500 joules

Description : A machine having an efficiency of 50% does 500 joules of work. Which of the following is the work input? Is it: w) 500 joules x) 250 joules y) 1000 joules z) 2500 joules

Last Answer : ANSWER: Y -- 1000 JOULES

A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Description : A flywheel starting from rest and accelerating uniformly performs 25 revolutions in 5 sec. Its angular velocity in rpm after 10 seconds would be a.50 rpm b.20 rpm c.25 rpm d.60 rpm e.45 rpm

Last Answer : b. 20 rpm

A train locomotive whose mass is 1 x 106 kilograms is traveling EAST at a speed of 100 kilometers per hour. A NORTHERLY wind is applying a force of 100 Newtons on the locomotive. How much work is the wind doing on the locomotive for each 10 meters it travels? w) 0 joules x) 1,000 joules y) 10,000 joules z) 100,000 joules

Description : A train locomotive whose mass is 1 x 106 kilograms is traveling EAST at a speed of 100 kilometers per hour. A NORTHERLY wind is applying a force of 100 Newtons on the locomotive. How much work is the wind doing ... 10 meters it travels? w) 0 joules x) 1,000 joules y) 10,000 joules z) 100,000 joules

Last Answer : ANSWER: W -- 0 JOULES

A man picks up a 50 kilogram block and carries it up a flight of stairs 10 meters high. He then carries the block back down the stairs and places the block in its original position. What is the NET work done on the block? w) 1,000 joules x) 750 joules y) 500 joules z) 0 joules

Description : A man picks up a 50 kilogram block and carries it up a flight of stairs 10 meters high. He then carries the block back down the stairs and places the block in its original position. What is the NET work done on the block? w) 1,000 joules x) 750 joules y) 500 joules z) 0 joules

Last Answer : ANSWER: Z -- 0 JOULES

A worker lifts a 10 kilogram block a vertical height of 2 meters. The work he does on the block is: w) 5 Joules x) 20 Joules y) 49 Joules z) 200 Joules

Description : A worker lifts a 10 kilogram block a vertical height of 2 meters. The work he does on the block is: w) 5 Joules x) 20 Joules y) 49 Joules z) 200 Joules

Last Answer : ANSWER: Z -- 200 JOULES

Hydraulic machines work under the Principle of : (1) Newton’s Law (2) Joules Law (3) Pascal’s Law (4) Floatation Law

Description : Hydraulic machines work under the Principle of : (1) Newton’s Law (2) Joules Law (3) Pascal’s Law (4) Floatation Law

Last Answer : Pascal’s Law

Two thick slices of bread, when completely oxidized by the body, can supply 200,000 cal of heat. How much work is this equivalent to?  a) 4,190,000 joules  b) 8,390,000 joules  c) 839,000 joules  d) 419 000 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Description : Two thick slices of bread, when completely oxidized by the body, can supply 200,000 cal of heat. How much work is this equivalent to?  a) 4,190,000 joules  b) 8,390,000 joules  c) 839, ... d) 419 000 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Last Answer : 419 000 joules

An electron is moved through a potential difference of 1 volt. How much energy in joules was used to move the electron?

Description : An electron is moved through a potential difference of 1 volt. How much energy in joules was used to move the electron? 

Last Answer : ANSWER: 1.6 x 10-19 JOULES

One mole of nitrogen at 8 bar and 600 K is contained in a piston cylinder arrangement. It is brought to 1 bar isothermally against a resisting pressure of 1 bar. The work done (in Joules) by the gas is (A) 30554 (B) 10373 (C) 4988.4 (D) 4364.9

Description : One mole of nitrogen at 8 bar and 600 K is contained in a piston cylinder arrangement. It is brought to 1 bar isothermally against a resisting pressure of 1 bar. The work done (in Joules) by the gas is (A) 30554 (B) 10373 (C) 4988.4 (D) 4364.9

Last Answer : (B) 10373

A body is moving with velocity 4 m/s , possesses 56 Joules of Kinetic Energy. The momentum of body will be equal to -Physics

Description : A body is moving with velocity 4 m/s , possesses 56 Joules of Kinetic Energy. The momentum of body will be equal to -Physics

Last Answer : (d) 28 kgms-1

What is the SI unit of electric current? (1) Amperes (2) Coulombs (3) Joules (4) Watts

Description : What is the SI unit of electric current? (1) Amperes (2) Coulombs (3) Joules (4) Watts

Last Answer : (1) Amperes Explanation: The SI unit for measuring an electric current is the am pere, which is the flow of electric charge across a surface at the rate of one coulomb per second.

Units of strain are A. Newton B. Joules C. WattD. no units

Description : Units of strain are A. Newton B. Joules C. Watt D. no units

Last Answer :  no units

Units of stress are A. Newton B. Joules C. Pascal D. Watt

Description : Units of stress are A. Newton B. Joules C. Pascal D. Watt

Last Answer :  Pascal

An object with a mass of 5 kilograms is a distance of 5 meters above the surface of the earth. If the acceleration due to gravity is 10 meters per second squared, the potential energy of the object relative to the surface of the earth is: w) 10 joules x) 20 joules y) 100 joules z) 250 joules e) none of the above

Description : An object with a mass of 5 kilograms is a distance of 5 meters above the surface of the earth. If the acceleration due to gravity is 10 meters per second squared, the potential energy of the object relative to the ... is: w) 10 joules x) 20 joules y) 100 joules z) 250 joules e) none of the above

Last Answer : ANSWER: Z -- 250 JOULES

The Superconducting Super Collider will produce collisions with an energy of: w) 40 joules x) 40 MeV y) 40 TeV z) 200 TeV

Description : The Superconducting Super Collider will produce collisions with an energy of: w) 40 joules x) 40 MeV y) 40 TeV z) 200 TeV

Last Answer : ANSWER: Y -- 40 TeV

Suppose a crane lifts a 900 kilogram wrecking ball 12 meters above a concrete slab. 105,840 Joules of potential energy are stored in the wrecking ball. Now the ball is dropped. When the ball is 6 meters above the concrete slab, what is it's potential energy in Joules?

Description : Suppose a crane lifts a 900 kilogram wrecking ball 12 meters above a concrete slab. 105,840 Joules of potential energy are stored in the wrecking ball. Now the ball is dropped. When the ball is 6 meters above the concrete slab, what is it's potential energy in Joules? 

Last Answer : ANSWER: 52,920 JOULES

The rate at which electrical energy is used is measured in w) volts x) amperes y) joules z) watts

Description : The rate at which electrical energy is used is measured in w) volts x) amperes y) joules z) watts

Last Answer : ANSWER: Z -- WATTS

A 10 kilogram object falls from a cliff 100 meters high. At the midpoint of its fall its total energy is: w) 2450 Joules x) 4900 Joules y) 10,000 Joules z) 20,000 Joules

Description : A 10 kilogram object falls from a cliff 100 meters high. At the midpoint of its fall its total energy is: w) 2450 Joules x) 4900 Joules y) 10,000 Joules z) 20,000 Joules

Last Answer : ANSWER: Y -- 10,000 JOULES

A car with a mass of 1000 kilogram is moving at a speed of 10 meters per second. The kinetic energy of the car is: w) 100 Joules x) 5000 Joules y) 10,000 Joules z) 50,000 Joules

Description : A car with a mass of 1000 kilogram is moving at a speed of 10 meters per second. The kinetic energy of the car is: w) 100 Joules x) 5000 Joules y) 10,000 Joules z) 50,000 Joules

Last Answer : ANSWER: Z -- 50,000 JOULES

A kilocalorie is equal to one of the following. Is it equal to: w) 4.2 Joules x) 1000 Joules y) 4200 Joules z) 10,000 Joules

Description : A kilocalorie is equal to one of the following. Is it equal to: w) 4.2 Joules x) 1000 Joules y) 4200 Joules z) 10,000 Joules

Last Answer : ANSWER: Y -- 4200 JOULES

A 10 kilogram ball falls from a height of 5 meters and rebounds from the floor to a height of 3 meters. The energy lost by the ball is: w) 20 joules x) 98 joules y) 196 joules z) 294 joules

Description : A 10 kilogram ball falls from a height of 5 meters and rebounds from the floor to a height of 3 meters. The energy lost by the ball is: w) 20 joules x) 98 joules y) 196 joules z) 294 joules 

Last Answer : ANSWER: Y -- 196 JOULES

A machine's output is 4000 joules and its frictional losses are 1000 joules. Which of the following is its efficiency? Is it: w) 25% x) 30% y) 75% z) 80%

Description : A machine's output is 4000 joules and its frictional losses are 1000 joules. Which of the following is its efficiency? Is it: w) 25% x) 30% y) 75% z) 80%

Last Answer : ANSWER: Z -- 80%

Units commonly used for entropy are: w) kilograms per degree Kelvin x) Joules per degree Kelvin y) Newtons per Coulomb z) ergs

Description : Units commonly used for entropy are: w) kilograms per degree Kelvin x) Joules per degree Kelvin y) Newtons per Coulomb z) ergs

Last Answer : ANSWER: X -- JOULES PER DEGREE KELVIN

As a 10 kilogram mass on the end of a spring passes through its equilibrium position, the kinetic energy of the mass is 20 joules. The speed of the mass is: w) 2.0 meters per second x) 4.0 meters per second y) 5.0 meters per second z) 6.3 meters per second

Description : As a 10 kilogram mass on the end of a spring passes through its equilibrium position, the kinetic energy of the mass is 20 joules. The speed of the mass is: w) 2.0 meters per second x) 4.0 meters per second y) 5.0 meters per second z) 6.3 meters per second

Last Answer : ANSWER: W -- 2.0 METERS PER SECOND

If 10 joules of energy are required to move 5 coulombs of charge between two points, the potential difference between the two points is equal to how many volts?

Description : If 10 joules of energy are required to move 5 coulombs of charge between two points, the potential difference between the two points is equal to how many volts?

Last Answer : ANSWER: 2 VOLTS

Electric current may be expressed in which one of the following units? w) coulombs/volt x) joules/coulomb y) coulombs/second z) ohms/second

Description : Electric current may be expressed in which one of the following units? w) coulombs/volt x) joules/coulomb y) coulombs/second z) ohms/second

Last Answer : ANSWER: Y -- COULOMBS/SECOND

The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the above mentioned operation? a.N010 GO2 X10 Y10 X5 Y5 R5 b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Description : The tool of an NC machine has to move along a circular arc from (5, 5) to (10, 10) while performing an operation. The centre of the arc is at (10, 5). Which one of the following NC tool path command performs the ... b.N010 GO3 X10 Y10 X5 Y5 R5 c.N010 GO1 X5 Y5 X10 Y10 R5 d.N010 GO2 X5 Y5 X10 Y10 R5

Last Answer : a.N010 GO2 X10 Y10 X5 Y5 R5

Artificial intelligence is A . It uses machine-learning techniques. Here program can learn From past experience and adapt themselves to new situations B. Computational procedure that takes some value as input and produces some value as output. C. Science of making machines performs tasks that would require intelligence when performed by humans D . None of these

Description : Artificial intelligence is A . It uses machine-learning techniques. Here program can learn From past experience and adapt themselves to new situations B. Computational procedure that takes some ... performs tasks that would require intelligence when performed by humans D . None of these

Last Answer : C. Science of making machines performs tasks that would require intelligence when performed by humans

Which statement best describes the Software as a Service cloud delivery model? A. A virtual machine provisioned and provided from the cloud which allows the customer to deploy custom applications. B. A multitenant storage service provisioned from the cloud which allows the customer to leverage the cloud for storing software data. C. A solution stack or set of middleware delivered to the client from the cloud which provides services for the design, development, and testing of industry aligned applications. D. An application delivered to the client from the cloud which eliminates the need to install and run the application on the customer's own computers and simplifying maintenance and support.

Description : Which statement best describes the Software as a Service cloud delivery model? A. A virtual machine provisioned and provided from the cloud which allows the customer to deploy custom ... and run the application on the customer's own computers and simplifying maintenance and support.

Last Answer : An application delivered to the client from the cloud which eliminates the need to install and run the application on the customer's own computers and simplifying maintenance and support.

In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by aslowly falling body weighing 40 kg through a height of 4 m. The process isrepeated 500 times. The acceleration due to gravity is 9.8 ms-2. Neglectingthe heat capacity of agitator, the temperature of water (in °C) is(A) 40.5(B) 34.4(C) 26.8(D) 25

Description : In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by a slowly falling body weighing 40 kg through a height of 4 m. The process is repeated ... temperature of water (in °C) is (A) 40.5 (B) 34.4 (C) 26.8 (D) 25

Last Answer : (B) 34.4

One erg is equivalent to how many joules?  A. 10^-8  B. 10^-7  C. 10^-6  D. 10^-5

Description : One erg is equivalent to how many joules?  A. 10^-8  B. 10^-7  C. 10^-6  D. 10^-5

Last Answer : 10^-7

How many joules of energy is consumed when one watt power works in 1 second ?

Last Answer : One watt power working in 1 second will consume 1 joule of energy.

In SI units the power of sound is represented in A. Kgs B. Joules C. Newtons D. Watts

Description : In SI units the power of sound is represented in A. Kgs B. Joules C. Newtons D. Watts

Last Answer : ANS: D

A car traveling at a constant velocity of 20 meters per second passes a second car which is initially at rest. The car which was at rest starts accelerating at 10 meters per second squared the instant it is passed by the first car. They will meet again in: w) 2 seconds x) 4 seconds y) 6 seconds z) 8 seconds

Description : A car traveling at a constant velocity of 20 meters per second passes a second car which is initially at rest. The car which was at rest starts accelerating at 10 meters per second squared the instant it is passed ... car. They will meet again in: w) 2 seconds x) 4 seconds y) 6 seconds z) 8 seconds

Last Answer : ANSWER: X -- 4 SECONDS

In a construction site, a crane lifts 1000 kg of concrete mix to roof top at a height of 20 meters in 50 seconds. If the value of gravity 'g' due to earth is 10 m s-2, the power of elevator will be. -Physics

Description : In a construction site, a crane lifts 1000 kg of concrete mix to roof top at a height of 20 meters in 50 seconds. If the value of gravity 'g' due to earth is 10 m s-2, the power of elevator will be. -Physics

Last Answer : 4 KW (kilowatt)

A 40 kilogram girl climbs a vertical distance of 5 meters in twenty seconds at a constant velocity. How much work has the girl done?

Description : A 40 kilogram girl climbs a vertical distance of 5 meters in twenty seconds at a constant velocity. How much work has the girl done?

Last Answer : ANSWER: 2000 JOULES or 1960 JOULES

How many joules of work would be accomplished if you moved a 200-kg rock 10 meters?

Description : How many joules of work would be accomplished if you moved a 200-kg rock 10 meters?

Last Answer : 190

Holding 25-N bag of sugar 1 meter above the floor requires how many joules of work?

Description : Holding 25-N bag of sugar 1 meter above the floor requires how many joules of work?

Last Answer : 24

Holding 25-N bag of sugar 1 meter above the floor requires how many joules of work?

Description : Holding 25-N bag of sugar 1 meter above the floor requires how many joules of work?

Last Answer : 24

How many joules of work is the equivalent of 15000 cal of heat?  a) 62850 joules  b) 3579.95 joules  c) 14995.81 joules  d) 15004.19 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Description : How many joules of work is the equivalent of 15000 cal of heat?  a) 62850 joules  b) 3579.95 joules  c) 14995.81 joules  d) 15004.19 joules Formula: J =Work/Heat J = mechanical equivalent of heat whose value is 4.19 joules/calorie

Last Answer : 62850 joules

In a non-flow reversible process for which p = (- 3V+ 15) x 105N/m2,V changes from 1 m to 2 m3. The work done will be about  (a) 100 xlOO5 joules  (b) lxlO5 joules  (c) 10 xlO5 joules  (d) 10 xlO5 kilo joules  (e) 10xl04ki\ojoules.

Description : In a non-flow reversible process for which p = (- 3V+ 15) x 105N/m2,V changes from 1 m to 2 m3. The work done will be about  (a) 100 xlOO5 joules  (b) lxlO5 joules  (c) 10 xlO5 joules  (d) 10 xlO5 kilo joules  (e) 10xl04ki\ojoules.

Last Answer : Answer : c

A Teacher Can Get Important Place In Society If He Options: A) Performs The Role Of An Active Member The Political Party In Power B) Is Scholar And In Power C) Participates Actively In Social Activities D) Performs His Responsibility Honestly

Description : A Teacher Can Get Important Place In Society If He Options: A) Performs The Role Of An Active Member The Political Party In Power B) Is Scholar And In Power C) Participates Actively In Social Activities D) Performs His Responsibility Honestly

Last Answer : D) Performs His Responsibility Honestly 

The students who keep asking questions in the class Options: A) Performs the role of an active member of the political party in power. B) Should be encouraged to participate in classroom discussion C) Should be encouraged to find answer independently D) Should be encouraged to continue questioning.

Description : The students who keep asking questions in the class Options: A) Performs the role of an active member of the political party in power. B) Should be encouraged to participate in classroom discussion C) Should be encouraged to find answer independently D) Should be encouraged to continue questioning. 

Last Answer : D) Should be encouraged to continue questioning. 

How A 500 g piece of iron changes 7 C when heat is added. How much heat energy in joules is produced due to this change in temperature?

Description : How A 500 g piece of iron changes 7 C when heat is added. How much heat energy in joules is produced due to this change in temperature?

Last Answer : Need answer

As i was standing on a weighing machine inside a lift it recorded 50 kg wt. Suddenly for few seconds it recorded 45 kg wt.

Description : As i was standing on a weighing machine inside a lift it recorded 50 kg wt. Suddenly for few seconds it recorded 45 kg wt.

Last Answer : As i was standing on a weighing machine inside a lift it recorded 50 kg wt. Suddenly ... during that time? Explain with complete numerical analysis.

Interstage coolers are provided in a multistage compressor to (A) Save power in compressing a given volume to a given pressure (B) Cool the delivered air (C) Achieve the exact delivery pressure (D) None of these

Description : Interstage coolers are provided in a multistage compressor to (A) Save power in compressing a given volume to a given pressure (B) Cool the delivered air (C) Achieve the exact delivery pressure (D) None of these

Last Answer : (A) Save power in compressing a given volume to a given pressure