One mole of nitrogen at 8 bar and 600 K is contained in a piston cylinder arrangement. It is brought to 1 bar isothermally against a resisting pressure of 1 bar. The work done (in Joules) by the gas is (A) 30554 (B) 10373 (C) 4988.4 (D) 4364.9

One mole of nitrogen at 8 bar and 600 K is contained in a piston cylinder arrangement. It is brought to 1 bar isothermally against a resisting pressure of 1 bar. The work done (in Joules) by the gas is (A) 30554
(B) 10373
(C) 4988.4
(D) 4364.9
by

1 Answer

Answer :

(B) 10373
by

Related questions

The following gas phase reactions are carried out isothermally in a CSTR. A → 2R ; r1 = k1pA ; k1 = 20mole/(sec.m3 bar)A → 3S ; r2 = k2 pA ;k2 = 40mole/(sec.m3.bar)What is the maximum possible value of FR(mole/sec.)?(A) 1/3(B) 1/2(C) 2/3(D) 2

Description : The following gas phase reactions are carried out isothermally in a CSTR. A → 2R ; r1 = k1pA ; k1 = 20mole/(sec.m3 bar) A → 3S ; r2 = k2 pA ; k2 = 40mole/(sec.m3 .bar) What is the maximum possible value of FR(mole/sec.)? (A) 1/3 (B) 1/2 (C) 2/3 (D) 2

Last Answer : (C) 2/3

Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Last Answer : 12 kJ

A gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 at a constant pressure of 200 kPa. Find the work done on the system.  a. 5 kJ  b. 15 kJ  c. 10 kJ  d. 12 kJ

Description : A gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 at a constant pressure of 200 kPa. Find the work done on the system.  a. 5 kJ  b. 15 kJ  c. 10 kJ  d. 12 kJ

Last Answer : 12 kJ

Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Description : Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Last Answer : 2

A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Description : A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Last Answer : Answer : b

At one atmosphere, a cylinder with movable piston contains 2,000 milliliters of gas. If the pressure is increased to 5 atmospheres and the temperature remains unchanged, what is the new volume of the gas? w) 10,000 milliliters x) 400 milliliters y) 1,000 milliliters z) 4,000 milliliters

Description : At one atmosphere, a cylinder with movable piston contains 2,000 milliliters of gas. If the pressure is increased to 5 atmospheres and the temperature remains unchanged, what is the new volume of the gas? w) 10,000 milliliters x) 400 milliliters y) 1,000 milliliters z) 4,000 milliliters

Last Answer : ANSWER: X -- 400 MILLILITERS

A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Description : A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Last Answer : 130.08 {(10atm)(10)(32)/(0.0821) (300K)}

For a reciprocating pump, the indicator diagram is the graph between the (A) Discharge and overall efficiency (B) Volume swept by piston for one complete revolution and the pressure in the cylinder (C) Angle swept by the crank pin at any instant and the discharge (D) None of these

Description : For a reciprocating pump, the indicator diagram is the graph between the (A) Discharge and overall efficiency (B) Volume swept by piston for one complete revolution and the pressure in the cylinder (C) Angle swept by the crank pin at any instant and the discharge (D) None of these

Last Answer : (B) Volume swept by piston for one complete revolution and the pressure in the cylinder

6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Description : 6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (C) Merely compressing it beyond critical pressure

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37.0^(@)C` . As it does so, it absorbs

Description : A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37.0^(@)C` . As it does so, it absorbs

Last Answer : A piston filled with `0.04` mole of an ideal gas expands reversible from `50.0mL` at a constant temperature of `37. ... J` D. `q= +208 J, w=+208 J`

A flywheel of moment of inertia 9.8kgm 2 fluctuates by 30 rpm for a fluctuation in energy of 1936 joules. The means speed of flywheel is (in rpm) 1. 600 2. 900 3. 968 4. 2940

Description : A flywheel of moment of inertia 9.8kgm 2 fluctuates by 30 rpm for a fluctuation in energy of 1936 joules. The means speed of flywheel is (in rpm) 1. 600 2. 900 3. 968 4. 2940

Last Answer : 1. 600

Helium ( R= 0.4698 BTU/lbm-˚R ) is compressed isothermally from 14.7 psia and 68 ˚F. The compression ratio is 1:4. Calculate the work done by the gas.  A. –1454 BTU/lbm  B. -364 BTU/lbm  C.-187BTU/lbm  D.46.7 BTU/lbm Formula: W = RT ln (V2/V1)

Description : Helium ( R= 0.4698 BTU/lbm-˚R ) is compressed isothermally from 14.7 psia and 68 ˚F. The compression ratio is 1:4. Calculate the work done by the gas.  A. –1454 BTU/lbm  B. -364 BTU/lbm  C.-187BTU/lbm  D.46.7 BTU/lbm Formula: W = RT ln (V2/V1)

Last Answer : -364 BTU/lbm

Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Description : Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (D) Adiabatic expansion against a piston or in a turbine

Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Description : Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Last Answer : (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion)

Work required for compression of a gas contained in a cylinder is 7000 kJ. During compression, heat interaction of 3000 kJ causes the surroundings to be heated. Internal energy change of the gas during the compression is __________ kJ. (A) +4000 (B) -4000 (C) 10000 (D) -10000

Description : Work required for compression of a gas contained in a cylinder is 7000 kJ. During compression, heat interaction of 3000 kJ causes the surroundings to be heated. Internal energy change of the gas during the compression is __________ kJ. (A) +4000 (B) -4000 (C) 10000 (D) -10000

Last Answer : (A) +4000

The pressure inside a piston cylinder is a variable of a) Radius b) Plane angle c) Z plane distance d) Constant, not a variable

Description : The pressure inside a piston cylinder is a variable of a) Radius b) Plane angle c) Z plane distance d) Constant, not a variable

Last Answer : c) Z plane distance

The piston rod of a hydraulic cylinder exerts an operating force of 10kN. The allowable stress in the cylinder is 45N/mm². Calculate the thickness of the cylinder using Lame’s equation. Diameter of the cylinder is 40mm and pressure in cylinder is 10MPa. a) 2.05mm b) 4.2mm c) 5.07mm d) None of the listed

Description : The piston rod of a hydraulic cylinder exerts an operating force of 10kN. The allowable stress in the cylinder is 45N/mm². Calculate the thickness of the cylinder using Lame's equation. Diameter of the cylinder is 40mm and ... is 10MPa. a) 2.05mm b) 4.2mm c) 5.07mm d) None of the listed

Last Answer : c) 5.07mm

Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the vapor pressure of "X" be when the volume above the liquid is 100 ml and the temperature 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Description : Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the ... 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Last Answer : ANSWER: Y -- 120 TORR

Show digramatically the changes in the position of piston, if a. Pressure is increased from 1.0 bar to 2.0 bar at constant temperature. 

Description : Show digramatically the changes in the position of piston, if a. Pressure is increased from 1.0 bar to 2.0 bar at constant temperature. 

Last Answer : Consider a sample of a gas in a cylinder with a movable piston. Show digramatically the changes in ... pressure is decreased from 4 bar to 3 bar.

A gas performs the maximum work, when it expands (A) Non-uniformly (B) Adiabatically (C) Isobarically (D) Isothermally

Description : A gas performs the maximum work, when it expands (A) Non-uniformly (B) Adiabatically (C) Isobarically (D) Isothermally

Last Answer : (C) Isobarically

__________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Description : __________ pump is the most suitable device for discharging a liquid against a pressure of ≥ 1500 kgf/cm2 . (A) Centrifugal (B) Piston (C) Plunger (D) Vane

Last Answer : (C) Plunger

1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K

Description : 1m3 of an ideal gas at 500 K and 1000 kPa expands reversibly to 5 times its initial volume in an insulated container. If the specific heat capacity (at constant pressure) of the gas is 21 J/mole . K, the final temperature will be (A) 35 K (B) 174 K (C) 274 K (D) 154 K

Last Answer : (C) 274 K

A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered by the piston to sliding with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

What is the speed of the piston in the cylinder of a petrol engine ?

Description : What is the speed of the piston in the cylinder of a petrol engine ?

Last Answer : The speed of the piston in the cylinder of a petrol engine is also the speed of the alternator.

If a master cylinder with a two-square-inch piston travels 1/2 inch how far would the wheel cylinder with one -square-inch piston be moved?

Description : If a master cylinder with a two-square-inch piston travels 1/2 inch how far would the wheel cylinder with one -square-inch piston be moved?

Last Answer : -1

If piston displacement is deducted from the total volume of cylinder the remaining volume is known as 1. piston displacement 2. Clearance volume 3. displacement volume 4.compression ratio

Description : If piston displacement is deducted from the total volume of cylinder the remaining volume is known as 1. piston displacement 2. Clearance volume 3. displacement volume 4.compression ratio

Last Answer : ans 2

The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Description : The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Last Answer : c. To assist the pilot to adjust the fuel mixture

The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Description : The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Last Answer : c. To assist the pilot to adjust the fuel mixture

hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder

Description : hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder

Last Answer : (b) number of power stroke per minute for all cylinders

What mass of nitrogen is contained in a10 ft3 vessel at a pressure of 840atm and 820°R? Make a computation by using ideal gas equation.  a. 194lb  b. 214lb  c. 394 lb  d. 413lb formula: m=pV /RT

Description : What mass of nitrogen is contained in a10 ft3 vessel at a pressure of 840atm and 820°R? Make a computation by using ideal gas equation.  a. 194lb  b. 214lb  c. 394 lb  d. 413lb formula: m=pV /RT

Last Answer : 394 lb

A circular solid of uniform thickness 20 mm, radius 200 mm and mass 20 kg, is used as a flywheel. If it rotates at 600 rpm, the kinetic energy of the flywheel, in joules is 1. 395 2. 790 3. 1580 4. 3160

Description : A circular solid of uniform thickness 20 mm, radius 200 mm and mass 20 kg, is used as a flywheel. If it rotates at 600 rpm, the kinetic energy of the flywheel, in joules is 1. 395 2. 790 3. 1580 4. 3160

Last Answer : 2. 790

The work done by a weightless piston in causing an expansing `Delta V` (at constant temperature), when the opposing pressure P is variable, is given b

Description : The work done by a weightless piston in causing an expansing `Delta V` (at constant temperature), when the opposing pressure P is variable, is given b

Last Answer : The work done by a weightless piston in causing an expansing `Delta V` (at constant temperature), when the opposing ... 0 C. `W = -P Delta V` D. None

The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ) (1 + 0.5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Description : The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ... 5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Last Answer : (C) dXA /dt = k1 (1 - XA

1 mole of a real gas changes it state from state-A(2bar, 3L, 100 K) to state -B (2bar, 5L, 200 K) at constant pressure and finally to state-C (3bar, 1

Description : 1 mole of a real gas changes it state from state-A(2bar, 3L, 100 K) to state -B (2bar, 5L, 200 K) at constant pressure and finally to state-C (3bar, 1

Last Answer : 1 mole of a real gas changes it state from state-A(2bar, 3L, 100 K) to state -B (2bar, 5L, 200 K) at ... U_(AC) = 2200 J` D. `DeltaU_(AC) = 1770 J`

In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by aslowly falling body weighing 40 kg through a height of 4 m. The process isrepeated 500 times. The acceleration due to gravity is 9.8 ms-2. Neglectingthe heat capacity of agitator, the temperature of water (in °C) is(A) 40.5(B) 34.4(C) 26.8(D) 25

Description : In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by a slowly falling body weighing 40 kg through a height of 4 m. The process is repeated ... temperature of water (in °C) is (A) 40.5 (B) 34.4 (C) 26.8 (D) 25

Last Answer : (B) 34.4

. In a solution containing 0.30 Kg mole of solute and 600 kg of solvent, the molality is (A) 0.50 (B) 0.60 (C) 1 (D) 2

Description : . In a solution containing 0.30 Kg mole of solute and 600 kg of solvent, the molality is (A) 0.50 (B) 0.60 (C) 1 (D) 2

Last Answer : (A) 0.50

When vapour is compressed isothermally the ____________ changes. A] Volume. B] Pressure C] Temperature D] None of the mentioned

Description : When vapour is compressed isothermally the ____________ changes. A] Volume. B] Pressure C] Temperature D] None of the mentioned

Last Answer : A] Volume.

What is the total number of atoms contained in a 1.00 mole sample of helium?

Description : What is the total number of atoms contained in a 1.00 mole sample of helium?

Last Answer : The total number of atoms contained in a 1,00 mole sample ofhelium is 6,022 140 857.10e23.

What is the total number of atoms contained in a 1.00 mole sample of helium?

Description : What is the total number of atoms contained in a 1.00 mole sample of helium?

Last Answer : The total number of atoms contained in a 1,00 mole sample ofhelium is 6,022 140 857.10e23.

If an ideal gas is isothermally expanded, what will its internal energy?

Description : If an ideal gas is isothermally expanded, what will its internal energy?

Last Answer : Remain the same

An ideal gas is compresses isothermally. The enthalpy change is  a. Always negative  b. Always positive  c. zero  d. undefined

Description : An ideal gas is compresses isothermally. The enthalpy change is  a. Always negative  b. Always positive  c. zero  d. undefined

Last Answer : zero

An ideal gas is heated at constant volume and then expanded isothermally. Show processes on P-V & T-S diagrams.

Description : An ideal gas is heated at constant volume and then expanded isothermally. Show processes on P-V & T-S diagrams.

Last Answer : Process 1-2 : Constant volume process Process 2-3 : Constant temperature process (Isothermal process)

One mole of a gas occupying `3dm^(3)` expands against a constant external pressure of 1 atm to a volume of 13 lit. The workdone is :-

Description : One mole of a gas occupying `3dm^(3)` expands against a constant external pressure of 1 atm to a volume of 13 lit. The workdone is :-

Last Answer : One mole of a gas occupying `3dm^(3)` expands against a constant external pressure of 1 atm to a volume of 13 lit. ... `dm^(3)` D. `-48` atm `dm^(3)`

FeO (s) + CO (g) = Fe (s) + CO2 (g), k = 0. 435 at 1173E; at equilibrium, what will be the number of moles of CO gas required to reduce one mole of FeO at 1173 K? (A) 1.0 (B) 1.3 (C) 2.3 (D) 3.3

Description : FeO (s) + CO (g) = Fe (s) + CO2 (g), k = 0. 435 at 1173E; at equilibrium, what will be the number of moles of CO gas required to reduce one mole of FeO at 1173 K? (A) 1.0 (B) 1.3 (C) 2.3 (D) 3.3

Last Answer : Option D

A cylinder contains 640 gm of liquid oxygen. The volume occupied (in litres) by the oxygen, when it is released and brought to standard conditions (0°C, 760 mm Hg) will be __________ litres. (A) 448 (B) 224 (C) 22.4 (D) Data insufficient; can't be computed

Description : A cylinder contains 640 gm of liquid oxygen. The volume occupied (in litres) by the oxygen, when it is released and brought to standard conditions (0°C, 760 mm Hg) will be __________ litres. (A) 448 (B) 224 (C) 22.4 (D) Data insufficient; can't be computed

Last Answer : (A) 448

Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Description : Pumping of a corrosive liquid is generally preferred to be done by a __________ pump, as it can be made of a variety of materials including plastics. (A) Piston (B) Gear (C) Positive displacement (D) Sump

Last Answer : (B) Gear

In a turbine, the fluid expands almost (A) Isothermally (B) Isobarically (C) Adiabatically (D) None of these

Description : In a turbine, the fluid expands almost (A) Isothermally (B) Isobarically (C) Adiabatically (D) None of these

Last Answer : (C) Adiabatically

A change in state involving a decrease in entropy can be spontaneous, only if (A) It is exothermic (B) It is isenthalpic (C) It takes place isothermally (D) It takes place at constant volume

Description : A change in state involving a decrease in entropy can be spontaneous, only if (A) It is exothermic (B) It is isenthalpic (C) It takes place isothermally (D) It takes place at constant volume

Last Answer : (A) It is exothermic