A copper rod which is 1 centimeter in diameter carries a current of 5 amps. The current is distributed uniformly throughout the rod. The magnetic field half way between the axis of the rod and its outside edge is: w) zero. x) pointing radially outward y) pointing radially inward z) circles the axis of the rod

1 Answer

Answer :

ANSWER: Z -- CIRCLES THE AXIS OF THE ROD

Related questions

Description : An infinitely long wire carries a current of three amps. The magnetic field outside the wire: w) points radially away from the wire x) points radially inward y) circles the wire z) is zero.

Last Answer : ANSWER: Y -- CIRCLES THE WIRE

Description : For an object moving in uniform circular motion, the direction of the instantaneous acceleration vector is: w) tangent to the path of motion x) equal to zero y) directed radially outward z) directed radially inward

Last Answer : ANSWER: Z -- DIRECTED RADIALLY INWARD

Description : An ELECTRON moving horizontally along the +x axis enters a region of space with a horizontal uniform magnetic field pointing in the +y direction. The electron will be deflected: w) -y direction x) +y direction y) -z direction z) +z direction

Last Answer : ANSWER: Y -- -Z DIRECTION

Description : Assertion Net torque in the current carrying loop placed in a uniform magnetic field (pointing inwards) is zero. Reasonl Magnetic moment (M) is inward

Last Answer : Assertion Net torque in the current carrying loop placed in a uniform magnetic field (pointing inwards) ... . Reasonl Magnetic moment (M) is inwards.

Description : At a point halfway between two identical point charges, the electric field is equal to: w) zero x) half its maximum value y) its maximum value z) pointing away from the two charges

Last Answer : ANSWER: W -- ZERO 

Description : The general expression for the B.M. of a beam of length l is the beam carries M = (wl/2) x - (wx²/2)  (A) A uniformly distributed load w/unit length  (B) A load varying linearly from zero at one end to w at the other end  (C) An isolated load at mid span  (D) None of these 

Last Answer : (A) A uniformly distributed load w/unit length 

Description : The magnetic field produced by a long straight wire carrying a current points: w) in the direction of the current x) toward the wire y) away from the wire z) circles around the wire

Last Answer : ANSWER: Z -- CIRCLES AROUND THE WIRE

Description : A cantilever carries is uniformly distributed load W over its whole length and a force W acts at its  free end upward. The net deflection of the free end will be  (A) Zero  (B) (5/24) (WL3 /EI) upward  (C) (5/24) (WL3 /EI) downward  (D) None of these 

Last Answer : (B) (5/24) (WL3 /EI) upward

Description : For a negative point charge, the electric field vectors: w) circle the charge x) point radially in toward the charge y) point radially away from the charge z) cross at infinity

Last Answer : ANSWER: X -- POINT RADIALLY IN TOWARD THE CHARGE

Description : If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit  length over the entire span,  (A) Horizontal thrust is wl2 /8h (B) S.F. will be zero throughout  (C) B.M. will be zero throughout  (D) All the above 

Last Answer : (D) All the above 

Description : A round viewing window with a 20 centimeter diameter is installed in a tank at the Shedd Aquarium. It is 5 meters below the water surface. The force on the window is approximately: w) 1,500 Newtons x) 10,000 Newtons y) 25,000 Newtons z) 50,000 Newtons

Last Answer : ANSWER: W -- 1,500 NEWTONS

Description : A constant potential difference is applied across the plates of a parallel-plate capacitor. Neglecting any edge effects, the electric field inside the capacitor is: w) constant x) varying as one over r squared y) decreasing as one moves from the positive to the negative plate z) zero

Last Answer : ANSWER: W -- CONSTANT

Description : A three hinged parabolic arch hinged at the crown and springing, has a horizontal span of 4.8 m  and a central rise of 1 m. It carries a uniformly distributed load of 0.75 tonne per metre over half  left hand span ... A) 10.8 tonnes  (B) 1.08 tonnes  (C) 1.8 tonnes  (D) 0.8 tonnes 

Last Answer : (B) 1.08 tonnes 

Description : Magnetic lines of force have all but one of the following characteristics. The one that they DO NOT have is: w) they go from the South-pole to the North-pole of a magnet outside of the magnet ... most concentrated at the poles of a magnet y) they pass through copper z) they never cross one another

Last Answer : ANSWER: W -- THEY GO FROM THE SOUTH-POLE TO THE NORTH-POLE OF THE M AGNET 

Description : Ten coulombs of charge are placed on a solid copper sphere. Once the charge has come to rest, the ELECTRIC POTENTIAL inside the sphere is found to be: w) zero x) uniform inside the sphere and ... the sphere y) smaller than the electric potential outside the sphere z) varying as one over r squared

Last Answer : ANSWER: X -- UNIFORM INSIDE THE SPHERE AND EQUAL TO THE ELECTRIC POTENTIAL ON THE SURFACE OF THE SPHERE 

Description : A simply supported beam carries a uniformly distributed load over the whole span.The deflection at the centre is y.If the distributed load per unit length is doubled and also depth of beam is doubled ,then the deflection at the centre would be a.2y b.4y c.y/2 d.y/4.

Last Answer : d.y/4.

Description : A simply supported beam is of rectangular section.It carries a uniformly distributed load over the whole span.The deflection at the centre is y.If the depth of beam is doubled ,the deflection at the centre would be a.2y b.4y c.y/2 d.y/8.

Last Answer : d.y/8.

Description : A long straight wire along the `z`- axis carries a current ` I` in the negative ` z- direction` . The magnetic vector field ` vec(B)` at a point havin

Last Answer : A long straight wire along the `z`- axis carries a current ` I` in the negative ` z- direction` . The magnetic ... -yhat(j)))/(2pi(x^(2)+y^(2)))`

Description : Ten coulombs of positive charge are placed on an irregularly-shaped, solid piece of copper. Once the charge has stopped moving, the electric field inside the copper is: w) zero x) changes as one ... squared y) becomes smaller as you approach the center z) becomes larger as you approach the center

Last Answer : ANSWER: W -- ZERO

Description : When a liquid moves through a pipe having a varying diameter, the pressure against the inside walls of the pipe will be: w) the same throughout x) lowest where the diameter is smallest y) lowest where the diameter is largest z) lowest where the velocity of flow is lowest 

Last Answer : ANSWER: X -- LOWEST WHERE THE DIAMETER IS SMALLEST

Description : The force on a charged particle moving parallel to magnetic field lines is: w) in the direction of the field x) zero y) perpendicular to the field z) in the opposite direction of the field

Last Answer : ANSWER: X -- ZERO

Description : Which of the following iron core electromagnets creates the greatest amount of magnetic flux: w) 1,000 coils, 2 amps of current x) 250 coils, 7 amps of current y) 700 coils, 3 amps of current 

Last Answer : ANSWER: Y -- 700 COILS, 3 AMPS OF CURRENT

Description : A wooden board 2 meters long, 30 centimeters wide and 4 centimeters thick floats in water with 1 centimeter of its thickness above the surface. The mass of the board is: w) 1.8 kilograms x) 18 kilograms y) 24 kilograms z) 176 kilograms

Last Answer : ANSWER: X -- 18 KILOGRAMS

Description : What is a calorie? w) amount of heat required to raise one gram of water one degree Celsius. x) amount of work required to move one gram of water by one centimeter. y) amount of heat required to melt ice. z) amount of heat required to raise one gram of water one degree Fahrenheit

Last Answer : ANSWER: W -- AMOUNT OF HEAT REQUIRED TO RAISE ONE GRAM OF WATER ONE DEGREE CELSIUS

Description : The SI unit of pressure is the: w) Torr x) dyne per centimeter squared y) atmosphere z) pascal

Last Answer : ANSWER: Z -- PASCAL

Description : A simply supported beam A carries a point load at its mid span. Another identical beam B carries  the same load but uniformly distributed over the entire span. The ratio of the maximum  deflections of the beams A and B, will be  (A) 2/3  (B) 3/2  (C) 5/8  (D) 8/5 

Last Answer : (D) 8/5 

Description : A two way slab (a) May be simply supported on the four edges, with comers not held down and carrying uniformly distributed load. (b) May be simply supported on the four edge , with corners held ... . (c) May have edges fixed or continuous and carrying uniformly distributed load. (d) All the above.

Last Answer : (d) All the above.

Description : A simply supported beam carries uniformly distributed load of 20 kN/m over the length of 5 m. If flexural rigidity is 30000 kN.m2, what is the maximum deflection in the beam? a. 5.4 mm b. 1.08 mm c. 6.2 mm d. 8.6 mm

Last Answer : a. 5.4 mm

Description : A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which  causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the  joist will be,  (A) 10 m  (B) 12 m  (C) 14 m  (D) 16 m 

Last Answer : (D) 16 m 

Description : A beam of length L supported on two intermediate rollers carries a uniformly distributed load on its entire length. If sagging B.M. and hogging B.M. of the beam are equal, the length of each overhang, is (A) 0.107 L (B) 0.207 L (C) 0.307 L(D) 0.407 L

Last Answer : (B) 0.207 L

Description : If a three hinged parabolic arch carries a uniformly distributed load on its entire span, every section of the arch resists. (A) Compressive force (B) Tensile force (C) Shear force (D) Bending moment

Last Answer : (A) Compressive force

Description : A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 ... area of steel required, is (A) 14 cm (B) 15 cm2 (C) 16 cm2 (D) 17 cm

Last Answer : Answer: Option C

Description : A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Last Answer : d.16.27 mm.

Description : An iron ring of mean circumference 80 cm is uniformly wound with 500 turns of wire and carries 0.8A. Find the magnetic field strength. 

Last Answer : Ans: Magnetic field strength H = NI /l = 500 x 0.8 / 80 x 10-2 = 500 AT/m

Description : A simply supported rolled steel joist 8 m long carries a uniformly distributed load over it span so  that the maximum bending stress is 75 N/mm². If the slope at the ends is 0.005 radian and the  value of E = 0.2 ... joist, is  (A) 200 mm  (B) 250 mm  (C) 300 mm  (D) 400 mm 

Last Answer : (D) 400 mm 

Description : A simply supported beam which carries a uniformly distributed load has two equal overhangs. To  have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang  to the total length of the beam, is  (A) 0.207  (B) 0.307  (C) 0.407  (D) 0.508 

Last Answer : (A) 0.207 

Description : A simply supported beam of span carries a uniformly distributed load . The maximum bending moment is (A) WL/2 (B) WL/4 (C) WL/8 (D) WL/12

Last Answer : (C) WL/8

Description : A simply supported beam (l + 2a) with equal overhangs (a) carries a uniformly distributed load  over the whole length, the B.M. changes sign if  (A) l > 2a (B) l < 2a (C) l = 2a (D) l = 4a

Last Answer : (A) l > 2a

Description : If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2 . The intensity of the load per metre length, is (A) 240 kg (B) 250 kg (C) 260 kg (D) 270 kg

Last Answer : (B) 250 kg

Description : A cantilever of length 3m carries a uniformly distributed load of 15KN/m over a length of 2m from the free end.If I= 108 mm4 and E= 2×105 N/mm2,find the slope at the free end? a.0.00326 rad b.0.00578 rad c.0.00677 rad d.0.00786 rad

Last Answer : a.0.00326 rad

Description : A cantilever of length 3 m carries a uniformly distributed load over the entire length.If the deflection at the free end is 40 mm,find the slope at the free end. a.0.0115 rad b.0.01777 rad c.0.001566 rad d.0.00144 rad

Last Answer : b.0.01777 rad

Description : The slope at the free end of a cantilever of length 1m is 10 .If the cantilever carries a uniformly distributed load over the whole length ,then the deflection at the free end will be a.1cm b.1.309 cm c.2.618 cm. d.3.927cm.

Last Answer : b.1.309 cm

Description : A cantilever carrying a uniformly distributed load W over its full length is propped at its free end such that it is at the level of the fixed end. The bending moment will be zero at its free end also at ... point of the cantilever (C) 1/4th length from free end (D) 3/4th length from free end

Last Answer : (D) 3/4th length from free end

Description : The shear force at the centre of a simply supported beam of span l carrying a uniformly distributed load of w per unit length over the whole span is (a) wl (b) wl/2 (c) wl/4 (d) Zero

Last Answer : (d) Zero

Description : The shape of a magnetic field around a long straight current carrying wire is: w) elliptical. x) square y) varies depending on the magnitude of the current z) circular

Last Answer : ANSWER: Z -- CIRCULAR

Description : The Tesla and the Gauss are units of measure of: w) conductance x) magnetic field strength y) magnetic flux z) electrical current

Last Answer : ANSWER: X -- MAGNETIC FIELD STRENGTH

Description : In areas where light rains are uniformly distributed throughout the year, the type of sewerage system to be adopted is A. Separate system B. Combined system C. Partially combined system D. None of these

Last Answer : ANS: B

Description : Bulk of the convective heat transfer resistance from a hot tube surfaceto the fluid flowing in it, is (A) In the central core of the fluid (B) Uniformly distributed throughout the fluid (C) Mainly confined to a thin film of fluid near the surface (D) None of these

Last Answer : (C) Mainly confined to a thin film of fluid near the surface

Description : For any part of a beam subjected to uniformly distributed load, bending moment diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : d) Parabola