Please Log in or Register for more.


154 views

1 Answer

Answer :

D.C. generators are installed near the load centres to reduce line losses.

Like 0 like

Please log in or register to answer this question.

Related Questions



Last Answer : If  equalising bar is connected to the 2 DC generators  the current will be equal in 2 generators irrespective of parallel connection so that we connect equaliser bar

Show More

165 views 2 answers








Last Answer : In D.C. generators the polarity of the interpoles is the same as that of the main pole ahead.

Show More

138 views 1 answer








Last Answer : For the parallel operation of two or more D.C. compound generators, we should ensure that series fields of all generators should be either on positive side or negative side of the armature.

Show More

179 views 1 answer








Last Answer : Compensating windings are used in D.C. generators to neutralise the cross-magnetising effect of the armature reaction.

Show More

151 views 1 answer








Last Answer : D.C. generators are connected to the busbars or disconnected from them only under the floating condition to avoid sudden loading of the primemover, to avoid mechanicaljerk to the shaft, to avoid burning of switch contacts.

Show More

94 views 1 answer








Last Answer : In D.C. generators, the brushes on commutator remain in contact with conductors which lie under interpolar region.

Show More

223 views 1 answer








Last Answer : In D.C. generators, current to the external circuit from armature is given through commutator commutator.

Show More

253 views 1 answer








Last Answer : In D.C. generators the pole shoes are fastened to the pole core by counter sunk screws.

Show More

209 views 1 answer








Last Answer : D.C. generators are normally designed for maximum efficiency around full-load.

Show More

102 views 1 answer







Identify the increasing order of voltage regulation of the following dc generators a same load :  (A) differential compound, shunt and under compound  (B) shunt, differential compound and ... C) under compound, shunt and differential compound  (D) shunt, under compound and differential compound
Last Answer : Identify the increasing order of voltage regulation of the following dc generators a same load : under compound, shunt and differential compound 

Show More

123 views 1 answer







DC GENERATORS MCQ
Last Answer : 101. Wave winding is composed of (a) any even number of conductors (b) any odd number of conductors (c) that even number which is exact multiple of poles + 2 (d) that even number ... increase the field resistance (c) increase the speed of primemover (d) check armature insulation resis¬tance Ans: a

Show More

109 views 3 answers







In DC generators lamination core are generally made of?
Last Answer : In DC generators lamination core are generally made of silicon steel.

Show More

256 views 1 answer







The armature of D.C. generator is laminated to (a) reduce the bulk (b) provide the bulk (c) insulate the core (d) reduce eddy current loss

Show More

15 views 0 answers







The field coils of D.C. generator are usually made of (a) mica (b) copper (c) cast iron (d) carbon
Last Answer : Ans: b (b) copper

Show More

33 views 1 answer







The resistance of armature winding depends on (a) length of conductor (b) cross-sectional area of the conductor (c) number of conductors (d) all of the above

Show More

6 views 0 answers







Which of the following could be lamina-proximately the thickness of laminations of a D.C. machine ? (a) 0.005 mm (b) 0.05 mm (c) 0.5 m (d) 5 m

Show More

6 views 0 answers







Laminations of core are generally made of (a) case iron (b) carbon (c) silicon steel (d) stainless steel

Show More

3 views 0 answers








Last Answer : In D.C. generators on no-load, the air gap flux distribution in space is flat topped.

Show More

144 views 1 answer







Two synchronous generators operating in parallel supply a common load of 2.5 MW. The frequency-power characteristics have a common slope of 1 MW/Hz and the no-load frequencies of the generators are 51.5 Hz and 51.0 Hz, ... system frequency is (A) 50 Hz (B) 51 Hz (C) 51.25 Hz (D) 51.5 Hz
Last Answer : Two synchronous generators operating in parallel supply a common load of 2.5 MW. The frequency-power characteristics have a common slope of 1 MW/Hz and the no-load frequencies of the generators are 51.5 Hz and 51.0 Hz, respectively. Then the system frequency is 50 Hz

Show More

114 views 1 answer








Last Answer : Generators for peak load plants are usually designed for maximum efficiency at 50 to 75 percent full load.

Show More

139 views 1 answer







How Generators Work
Last Answer : How Generators Work Generators are devices which produce electricity. They produce electricity by converting mechanical energy from power sources. Examples would be steam, water, wind and gasoline. These ... can also be used for recreational purposes. Examples would be camping, boating or fishing.

Show More

6 views 1 answer







Why are generators rated in kVA not in kW ?
Last Answer : Because It's rating of generator kva is apparent power. Kw is active power which we use. And one is kvar reactive power.

Show More

117 views 3 answers







Two synchronous generators G1, G2 are operating in parallel and are equally sharing KVAR (Lag) component of load. To shift part of KVAR from G2 to G1, while keeping terminal voltage fixed, the following action must be done
Last Answer : Two synchronous generators G1, G2 are operating in parallel and are equally sharing KVAR (Lag) component of load. To shift part of KVAR from G2 to G1, while keeping terminal voltage fixed, the following action must be done Raise If1 and lower If2

Show More

421 views 1 answer








Last Answer : Large capacity generators are invariably hydrogen cooled.

Show More

95 views 1 answer








Last Answer : In a level compounded D.C. generator, full load terminal voltage is equal to no-load terminal voltage.

Show More

129 views 1 answer








Last Answer : The critical resistance of the D.C. generator is the resistance of field.

Show More

555 views 1 answer







If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be?
Last Answer : If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be zero.

Show More

277 views 1 answer








Last Answer : A 220 V D.C. generator is run at full speed without any excitation. The open circuit voltage will be about 2 V.

Show More

483 views 1 answer








Last Answer : In a D.C. generator in case the resistance of the field winding is increased, then output voltage will decrease.

Show More

251 views 1 answer








Last Answer : In a D.C. machine stray loss is the sum of iron loss and mechanical loss.

Show More

218 views 1 answer








Last Answer : A D.C. generator can be considered as rotating amplifier.

Show More

73 views 1 answer








Last Answer : To avoid formation of grooves in the commutator of a D.C. machine the brushes of opposite polarity should track each other.

Show More

3.0k views 1 answer








Last Answer : In a D.C. generator, the critical resistance refers to the resistance of field.

Show More

136 views 1 answer








Last Answer : Flashing the field of D.C. generator means creating residual magnetism by a D.C. source.

Show More

95 views 1 answer








Last Answer : If a D.C. generator fails to build up the probable cause could not be field resistance less than the critical resistance.

Show More

128 views 1 answer








Last Answer : In a D.C. generator the magnetic neutral axis coincides with the geometrical neutral axis, when there is no load on|he generator.

Show More

226 views 1 answer








Last Answer : The e.m.f. generated in a D.C. generator is directly proportional to speed of armature.

Show More

601 views 1 answer








Last Answer : In a D.C. generator the number of mechanical degrees and electrical degrees will be the same when number of poles is 2.

Show More

785 views 1 answer








Last Answer : D.C. generator generally preferred for charging automobile batteries is long shunt compound generator.

Show More

239 views 1 answer








Last Answer : Open circuited armature coil of a D.C. machine is identified by the scarring of the commutator segment to which open circuited coil is connected and indicated by a spark completely around the commutator.

Show More

159 views 1 answer








Last Answer : Satisfactory commutation of D.C. machines requires brushes should be of proper grade and size, brushes should smoothly run in the holders, smooth, concentric commutator properly undercut.

Show More

107 views 1 answer








Last Answer : The armature core of a D.C. generator is usually made of silicon steel.

Show More

153 views 1 answer














Last Answer : In a D.C. generator the ripples in the direct e.m.f. generated are reduced by using carbon brushes of superior quality.

Show More

224 views 1 answer







430 views 2 answers








Last Answer : The demagnetising component of armature reaction in a D.C. generator reduces generator e.m.f.

Show More

123 views 1 answer








Last Answer : In case of D.C. machine winding, number of commutator segments is equal to number of armature coils.

Show More

665 views 1 answer













Eddy currents are induced in the pole shoes of a D.C. machine due to?
Last Answer : Eddy currents are induced in the pole shoes of a D.C. machine due to relative rotation between field and armature.

Show More

231 views 1 answer








Last Answer : If brushes of a D.C. generator are moved in order to bring these brushes in magnetic neutral axis, there will be crossmagnetisation as well as demagnetising.

Show More

148 views 1 answer






Show More⇦ PreviousNext ⇨