The potential difference across a 4 ohm resistor is 20 volts. What is the current in the resistor?

The potential difference across a 4 ohm resistor is 20 volts. What is the current in the resistor?
by

1 Answer

Answer :

ANSWER: 5 AMPS
by

Related questions

The potential difference across a 4 ohm resistor is 20 volts. Assuming that all of the energy dissipated by this resistor is in the form of heat, how many joules of heat are radiated in 10 seconds?

Description : The potential difference across a 4 ohm resistor is 20 volts. Assuming that all of the energy dissipated by this resistor is in the form of heat, how many joules of heat are radiated in 10 seconds?  

Last Answer : ANSWER: 1000 JOULES

The constant potential difference across a 2 ohm resistor is 20 volts. How many watts of power are dissipated by this resistor?

Description : The constant potential difference across a 2 ohm resistor is 20 volts. How many watts of power are dissipated by this resistor?

Last Answer : ANSWER: 200 WATTS

An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Description : An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Last Answer : ANSWER: Z -- 200 OHMS

A 10 ohm and a 20 ohm resistor are connected in parallel to a current source. What fraction of the current flows through the 20 ohm resistor? w) 1/2 x) 1/3 y) 2/3 z) 3/4

Description : A 10 ohm and a 20 ohm resistor are connected in parallel to a current source. What fraction of the current flows through the 20 ohm resistor? w) 1/2 x) 1/3 y) 2/3 z) 3/4

Last Answer : ANSWER: X -- 1/3

A 20 ohm resistor and a 60 ohm resistor are connected in parallel to a voltage source. If the current in the 60 ohm resistor is one ampere, the current in the 20 ohm resistor will be: w) 1/3 ampere x) 2/3 ampere y) 1 ampere z) 3 amperes

Description : A 20 ohm resistor and a 60 ohm resistor are connected in parallel to a voltage source. If the current in the 60 ohm resistor is one ampere, the current in the 20 ohm resistor will be: w) 1/3 ampere x) 2/3 ampere y) 1 ampere z) 3 amperes

Last Answer : ANSWER: Z -- 3 AMPERES

What would be the voltage drop across the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 volts B. 10 volts C. 20 volts D. 30 volts

Description : What would be the voltage drop across the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 volts B. 10 volts C. 20 volts D. 30 volts

Last Answer : Answer: C

An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Description : An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Last Answer : 10 ohms

Twelve volts are applied across a resistor. A current of 3 mA is measured. What is the value of

Description : Twelve volts are applied across a resistor. A current of 3 mA is measured. What is the value of the resistor? A.4 ohms B.400 ohms C.4 kohms D.4.4 ohms

Last Answer : Twelve volts are applied across a resistor. A current of 3 mA is measured. What is the value of the resistor? A.4 ohms B.400 ohms C.4 kohms D.4.4 ohms

A current of 5 amps passes through a 10 ohm resistor. What power is dissipated by this resistor under these conditions?

Description : A current of 5 amps passes through a 10 ohm resistor. What power is dissipated by this resistor under these conditions?

Last Answer : ANSWER: 250 WATTS

A current of 6 amperes flows through a 2 ohm resistor for 30 seconds. How many coulombs of charge have passed through the resistor?

Description : A current of 6 amperes flows through a 2 ohm resistor for 30 seconds. How many coulombs of charge have passed through the resistor? 

Last Answer : ANSWER: 180 COULOMBS

A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Description : A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Last Answer : ANSWER: X -- CURRENT WILL LAG BY 26 DEGREES.

A current of 5 amps passes through a 10 ohm resistor. How many joules of energy will be generated by this resistor in 2 seconds?

Description : A current of 5 amps passes through a 10 ohm resistor. How many joules of energy will be generated by this resistor in 2 seconds? 

Last Answer : ANSWER: 500 JOULES

When troubleshooting most electronic circuits, 'loading effect' can be minimized by using a voltmeter with a/an ___________________. A. input impedance much greater than the impedance across which the voltage is being measured B. input impedance much less than the impedance across which the voltage is being measured C. sensitivity of less than 1000 ohms/volt D. sensitivity of more than 1000 volts/ohm

Description : When troubleshooting most electronic circuits, 'loading effect' can be minimized by using a voltmeter with a/an ___________________. A. input impedance much greater than the impedance across which the voltage ... sensitivity of less than 1000 ohms/volt D. sensitivity of more than 1000 volts/ohm

Last Answer : Answer: A

What voltage would be measured across the 45 ohm resistor?

Description : What voltage would be measured across the 45 ohm resistor?

Last Answer : Not enough information. But if you know the current, you can useOhm's Law (just multiply the resistance times the current).

With a 12 V supply, a silicon diode, and a 370 - ohm resistor in series, what voltage will be dropped across...

Description : With a 12 V supply, a silicon diode, and a 370 - ohm resistor in series, what voltage will be dropped across the diode? a) 0.3V b) 0.7V c) 0.9V d) 1.4V

Last Answer : 0.7V

In an experiment on studying the dependence of current flowing through a given resistor on the potential difference applied across it, list two ways how a student would change the values of current in the circuit?

Description : In an experiment on studying the dependence of current flowing through a given resistor on the potential difference applied across it, list two ways how a student would change the values of current in the circuit?

Last Answer : Answer. There are two ways in which a student can change the values of current in the circuit: By increasing or decreasing the number of cells. By changing the value of resistance.

While performing an experiment to study the dependence of current on the potential difference across two ends of the resistor, a student keeps the circuit closed for a long time to measure the current and potential difference. State how the resistance of the resistor will be affected?

Description : While performing an experiment to study the dependence of current on the potential difference across two ends of the resistor, a student keeps the circuit closed for a long time to measure the current and potential difference. State how the resistance of the resistor will be affected?

Last Answer : Answer. When the circuit is closed for a long time, the flow of current will be in excess which causes unwanted heating in the resistor and changes the value of resistance.

If current of 20 mA is passing through op-amp and voltage drop across series resistor is 10 V then value of resistance is A. 500Ω B. 400Ω C. 300Ω D. 200Ω

Description : If current of 20 mA is passing through op-amp and voltage drop across series resistor is 10 V then value of resistance is A. 500Ω B. 400Ω C. 300Ω D. 200Ω

Last Answer : 500Ω

A potentiometer having the potential gradient of `2 mV//cm` is used to measure the difference of potential across a resistance of `10 ohm`. If a lengt

Description : A potentiometer having the potential gradient of `2 mV//cm` is used to measure the difference of potential across a resistance of `10 ohm`. If a lengt

Last Answer : A potentiometer having the potential gradient of `2 mV//cm` is used to measure the difference of potential across a ... `) A. 1 B. 2 C. 5 D. 10

A potentiometer having the potential gradient of `2 mV//cm` is used to measure the difference of potential across a resistance of `10 ohm`. If a lengt

Description : A potentiometer having the potential gradient of `2 mV//cm` is used to measure the difference of potential across a resistance of `10 ohm`. If a lengt

Last Answer : A potentiometer having the potential gradient of `2 mV//cm` is used to measure the difference of potential across a ... `) A. 1 B. 2 C. 5 D. 10

A five ohm and a ten ohm resistor are connected in parallel, what single resistance is "equivalent" to this combination?

Description : A five ohm and a ten ohm resistor are connected in parallel, what single resistance is "equivalent" to this combination? 

Last Answer : ANSWER: 3 AND 1/3 OHM

A transformer has a turns ratio of two to one. If a 100 ohm resistor is connected on the high side, its resistance as measured on the low side would be: w) 25 ohms x) 50 ohms y) 100 ohms z) 400 ohms

Description : A transformer has a turns ratio of two to one. If a 100 ohm resistor is connected on the high side, its resistance as measured on the low side would be: w) 25 ohms x) 50 ohms y) 100 ohms z) 400 ohms

Last Answer : ANSWER: W -- 25 OHMS

A circuit has a resistance of 200 ohms. The resistance of the circuit can be reduced to 120 ohms by adding which of the following to the circuit. w) 80 ohm resistor in series x) 150 ohm resistor in parallel y) 240 ohm resistor in series z) 300 ohm resistor in parallel

Description : A circuit has a resistance of 200 ohms. The resistance of the circuit can be reduced to 120 ohms by adding which of the following to the circuit. w) 80 ohm resistor in series x) 150 ohm resistor in parallel y) 240 ohm resistor in series z) 300 ohm resistor in parallel

Last Answer : ANSWER: Z -- 300 OHM RESISTOR IN PARALLEL

Current in a circuit if resistance of 15 Ω and potential difference of 3.0 V is applied across it's ends is A. 1 A B. 2 A C. 0.5 A D. 0.20 A

Description : Current in a circuit if resistance of 15 Ω and potential difference of 3.0 V is applied across it's ends is A. 1 A B. 2 A C. 0.5 A D. 0.20 A

Last Answer : 0.20 A

An amplifier operating over the frequency range from 18 to 20 MHz has 10 kilo ohm input resistor. What is

Description : An amplifier operating over the frequency range from 18 to 20 MHz has 10 kilo ohm input resistor. What is the r.m.s. noise voltage at the input to this amplifier if the ambient temperature is 27o C

Last Answer : An amplifier operating over the frequency range from 18 to 20 MHz has 10 kilo ohm input resistor. What is the r.m.s. noise voltage at the input to this amplifier if the ambient temperature is 27o C 18.2 microvolt

In a galvanometer, the deflection becomes one half when the galvanometer is shunted by a 20 ohm resistor.

Description : In a galvanometer, the deflection becomes one half when the galvanometer is shunted by a 20 ohm resistor. The galvanometer resistance is 

Last Answer : In a galvanometer, the deflection becomes one half when the galvanometer is shunted by a 20 ohm resistor. The galvanometer resistance is 10 Ohm

In the circuit shown the voltage drop across the `15Omega` resistor is `30 V` having the polarity as indicated. The ratio of potential difference acro

Description : In the circuit shown the voltage drop across the `15Omega` resistor is `30 V` having the polarity as indicated. The ratio of potential difference acro

Last Answer : In the circuit shown the voltage drop across the `15Omega` resistor is `30 V` having the ... difference across `5Omega` and resistance `R` is

If power dissipated in the `9 Omega` resistor in the resistor shown is `36 W`, the potential difference across the `2 Omega` resistor is

Description : If power dissipated in the `9 Omega` resistor in the resistor shown is `36 W`, the potential difference across the `2 Omega` resistor is

Last Answer : If power dissipated in the `9 Omega` resistor in the resistor shown is `36 W`, the potential difference across the `2 ... 8 V B. 10 V C. 2 V D. 4 V

A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Description : A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Last Answer : False.

What is the power used in a circuit that has 10 amperes of current through a 10-ohm resistor?

Description : What is the power used in a circuit that has 10 amperes of current through a 10-ohm resistor?

Last Answer : 1 kilowatt.

An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Description : An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Last Answer : 50/(50+1k)*100 = 4.76%

If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Description : If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Last Answer : If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is

Description : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is (A) 11% (B) 9% (C) 1.1% (D) 3%

Last Answer : The potential coil of a single phase dynamometer wattmeter has 4840 Ohm resistance. Voltage across the load is 220 V. With the potential coil connected on the load side, the meter indicates 100 W. Approximate percentage error due to wattmeter connection is 11%

Average power dissipated in resistor if sinusoidal p.d of peak value 25 V is connected across a 20 Ω resistor isA. 15.6 WB. 15 WC. 16 WD. 17 W

Description : Average power dissipated in resistor if sinusoidal p.d of peak value 25 V is connected across a 20 Ω resistor is A. 15.6 W B. 15 W C. 16 W D. 17 W

Last Answer : 15.6 W

What power would be consumed by the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts

Description : What power would be consumed by the series resistor of the circuit shown in the illustration if the source is 30 volts, the resistance of R1 is 10 ohms, R2 is 10 ohms, and R3 is 10 ohms? EL-0032 A. 5 watts B. 10 watts C. 20 watts D. 40 watts

Last Answer : Answer: D

A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Description : A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Last Answer : ANSWER: Z -- 5 V/R

What is the effect upon an electron that enters the buncher gap when the potential across the grids is at 0 volts?

Description : What is the effect upon an electron that enters the buncher gap when the potential across the grids is at 0 volts?

Last Answer : There is no effect

The potential drop across the `3 Omega` resistor is

Description : The potential drop across the `3 Omega` resistor is

Last Answer : The potential drop across the `3 Omega` resistor is A. 1 V B. `1.5 V` C. 2 V D. 3 V

The potential taken between two points across a resistor will be a) Positive b) Negative c) Zero d) Infinity

Description : The potential taken between two points across a resistor will be a) Positive b) Negative c) Zero d) Infinity

Last Answer : b) Negative

If 10 joules of energy are required to move 5 coulombs of charge between two points, the potential difference between the two points is equal to how many volts?

Description : If 10 joules of energy are required to move 5 coulombs of charge between two points, the potential difference between the two points is equal to how many volts?

Last Answer : ANSWER: 2 VOLTS

A circuit has a source voltage of 100 volts and two 50-ohm resistors connected in series. If the reference point for this circuit is placed between the two resistors, what would be the voltage at the reference point?

Description : A circuit has a source voltage of 100 volts and two 50-ohm resistors connected in series. If the reference point for this circuit is placed between the two resistors, what would be the voltage at the reference point?

Last Answer : 50 volts.

A voltmeter arranged across the power supply measures A. potential difference B. e.m.f C. current D. resistance

Description : A voltmeter arranged across the power supply measures A. potential difference B. e.m.f C. current D. resistance

Last Answer : e.m.f

Does a 10k ohm resistor resist more than a 10 ohm resistor?

Description : Does a 10k ohm resistor resist more than a 10 ohm resistor?

Last Answer : Higher values mean more resistance.

Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and if no resistance value is fraction

Description : Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and if no resistance value is fraction

Last Answer : Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and ... in ohm is A. 4 B. 6 C. 8 D. 12

What is the phase angle of an ohm inductor in series with an ohm resistor connected to a 5 KHz source?

Description : What is the phase angle of an ohm inductor in series with an ohm resistor connected to a 5 KHz source?

Last Answer : You need to provide values of resistor and inductor etc to find the phase angle.

In the illustrated circuit 'A', what power is consumed by a 3 ohm resistor with a 12 volt source? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Description : In the illustrated circuit 'A', what power is consumed by a 3 ohm resistor with a 12 volt source? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Last Answer : Answer: B

In the illustration what is the minimum wattage needed for a 3 ohm resistor with a 12 VDC power source in circuit 'A'? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Description : In the illustration what is the minimum wattage needed for a 3 ohm resistor with a 12 VDC power source in circuit 'A'? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Last Answer : Answer: B

The colored bands for a 4,700 ohm resistor with a ten percent tolerance are?

Description : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

Last Answer : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

A metal resistor has resistance of 10 ohm at 0°C and 11 ohms at 160°C, the temperature coefficient is

Last Answer : A metal resistor has resistance of 10 ohm at 0°C and 11 ohms at 160°C, the temperature coefficient is 0.000625 /°C.

An open resistor, when checked with an ohm-meter reads?

Description : An open resistor, when checked with an ohm-meter reads?

Last Answer : An open resistor, when checked with an ohm-meter reads infinite.