The colored bands for a 4,700 ohm resistor with a ten percent tolerance are?

The colored bands for a 4,700 ohm resistor with a ten percent tolerance are?

A.yellow, violet, red, gold

B.yellow, violet, orange, gold

C.yellow, violet, red, silver

D.orange, violet, red, silver
by

1 Answer

Answer :

The colored bands for a 4,700 ohm resistor with a ten percent tolerance are?

A.yellow, violet, red, gold

B.yellow, violet, orange, gold

C.yellow, violet, red, silver

D.orange, violet, red, silver

by

Related questions

A carbon resistor has a resistance of 50 ohms, and a tolerance of 5 percent. What are the colors of bands one, two, three, and four, respectively?

Description : A carbon resistor has a resistance of 50 ohms, and a tolerance of 5 percent. What are the colors of bands one, two, three, and four, respectively?

Last Answer : The bands are green, black, black, and gold.

An open resistor, when checked with an ohm-meter reads?

Description : An open resistor, when checked with an ohm-meter reads?

Last Answer : An open resistor, when checked with an ohm-meter reads infinite.

The sequence of bands marked on a carbon resistor is yellow , red orange and silver. What is its (a) resistance and (b) tolerance ?

Description : The sequence of bands marked on a carbon resistor is yellow , red orange and silver. What is its (a) resistance and (b) tolerance ?

Last Answer : The sequence of bands marked on a carbon resistor is yellow , red orange and silver. What is its (a) resistance and (b) tolerance ?

Ten signals, each requiring 3000 Hz, are multiplexed on to a single channel using FDM. How much minimum bandwidth is required for the multiplexed channel ? Assume that the guard bands are 300 Hz wide. (A) 30,000 (B) 32,700 (C) 33,000 (D) None of the above

Description : Ten signals, each requiring 3000 Hz, are multiplexed on to a single channel using FDM. How much minimum bandwidth is required for the multiplexed channel ? Assume that the guard bands are 300 Hz wide. (A) 30,000 (B) 32,700 (C) 33,000 (D) None of the above

Last Answer : (B) 32,700

In the resistance colour code, the fourth band signifies – (1) tolerance level (2) power of ten (3) the total value of resistance (4) the material of the resistor

Description : In the resistance colour code, the fourth band signifies – (1) tolerance level (2) power of ten (3) the total value of resistance (4) the material of the resistor

Last Answer : (1) tolerance level Explanation: The first and second band represent the numerical value of the resistor, and the color of the third band specify the power-often multiplier. Reading the resistor from left to right, the fourth band represents the tolerance.

In the resistance colour code, the fourth band signifies (1) tolerance level (2) power of ten (3) the total value of resistance (4) the material of the resistor

Description : In the resistance colour code, the fourth band signifies (1) tolerance level (2) power of ten (3) the total value of resistance (4) the material of the resistor

Last Answer : tolerance level

A five ohm and a ten ohm resistor are connected in parallel, what single resistance is "equivalent" to this combination?

Description : A five ohm and a ten ohm resistor are connected in parallel, what single resistance is "equivalent" to this combination? 

Last Answer : ANSWER: 3 AND 1/3 OHM

International ohm is defined in terms of the resistance of?

Description : International ohm is defined in terms of the resistance of?

Last Answer : International ohm is defined in terms of the resistance of a column of mercury.

If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Description : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Last Answer : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes 0.4 ohm.

How much voltage is needed to produce 2.5 A of current through a 200 ohms resistor?

Description : How much voltage is needed to produce 2.5 A of current through a 200 ohms resistor? A.50 V B.500 V C.80 V D.8 V

Last Answer : 500 V

When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is?

Description : When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is? A.14.4 V B.1.4 V C.100 V D.10 V

Last Answer : When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is? A.14.4 V B.1.4 V C.100 V D.10 V

When the pointer of an analog ohmmeter reads close to zero, the resistor being measured is?

Description : When the pointer of an analog ohmmeter reads close to zero, the resistor being measured is? A.overheated B.shorted C.open D.reversed

Last Answer : When the pointer of an analog ohmmeter reads close to zero, the resistor being measured is? A.overheated B.shorted C.open D.reversed

Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor

Description : Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor and 4.2 V rms across the other, the peak source voltage is? A.16.54 V B.1.65 V C.10.60 V D.5.93 V

Last Answer : Two series resistors are connected to an ac source. If there are 7.5 V rms across one resistor and 4.2 V rms across the other, the peak source voltage is? A.16.54 V B.1.65 V C.10.60 V D.5.93 V

Four amperes of current are measured through a 24 ohms resistor connected across a voltage

Description : Four amperes of current are measured through a 24 ohms resistor connected across a voltage source. How much voltage does the source produce? A.960 V B.9.6 V C.96 V D.8 V

Last Answer : Four amperes of current are measured through a 24 ohms resistor connected across a voltage source. How much voltage does the source produce? A.960 V B.9.6 V C.96 V D.8 V

A two-terminal variable resistor is known as a?

Description : A two-terminal variable resistor is known as a? A.potentiometer B.thermistor C.rheostat D.wiper

Last Answer : A two-terminal variable resistor is known as a? A.potentiometer B.thermistor C.rheostat D.wiper

The minimum resistance value for a blue, gray, red, silver resistor is?

Description : The minimum resistance value for a blue, gray, red, silver resistor is? A.612 ohms B.6,120 ohms C.6,800 ohms D.6,460 ohms

Last Answer : The minimum resistance value for a blue, gray, red, silver resistor is? A.612 ohms B.6,120 ohms C.6,800 ohms D.6,460 ohms

Twelve volts are applied across a resistor. A current of 3 mA is measured. What is the value of

Description : Twelve volts are applied across a resistor. A current of 3 mA is measured. What is the value of the resistor? A.4 ohms B.400 ohms C.4 kohms D.4.4 ohms

Last Answer : Twelve volts are applied across a resistor. A current of 3 mA is measured. What is the value of the resistor? A.4 ohms B.400 ohms C.4 kohms D.4.4 ohms

The third color band on a resistor is used to indicate the ______________. A. tolerance of the resistor B. number of zeros following the first two significant figures in the resistance value C. first significant figure of the resistance D. second significant figure of the resistance

Description : The third color band on a resistor is used to indicate the ______________. A. tolerance of the resistor B. number of zeros following the first two significant figures in the resistance value C. first significant figure of the resistance D. second significant figure of the resistance

Last Answer : Answer: B

The gold color code in a resistor indicates a tolerance of

Description : The gold color code in a resistor indicates a tolerance of

Last Answer : The gold color code in a resistor indicates a tolerance of 5%

A resistor with the color coded value of 1000 ohms and ± 10% tolerance can have an actual resistance...

Description : A resistor with the color coded value of 1000 ohms and ± 10% tolerance can have an actual resistance between ________. A. 990 ohm and 1010 ohm B. 900 ohm and 1100 ohm C. 1000 ohm and 1100 ohm D. 900 ohm and 1000 ohm. 

Last Answer : A resistor with the color coded value of 1000 ohms and ± 10% tolerance can have an actual resistance between 900 ohm and 1100 ohm.

What is the series of colored bands created when sunlight is separated?

Description : What is the series of colored bands created when sunlight is separated?

Last Answer : A spectrum

In interference experiment, by keeping all other parameters constant, if you see the thin film interference from different angles, you will observe (a)Uniform illumination of screen (b) Uniform darkness on the screen (c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Description : In interference experiment, by keeping all other parameters constant, if you see the thin film interference from different angles, you will observe (a)Uniform illumination of screen (b) Uniform ... c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Last Answer : (d) Few colored bands and then general illumination

In interference experiment, monochromatic light is replaced by white light, we will see (a) Uniform illumination of screen (b) Uniform darkness on the screen (c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Description : In interference experiment, monochromatic light is replaced by white light, we will see (a) Uniform illumination of screen (b) Uniform darkness on the screen (c) Equally spaced dark and white bands (d) Few colored bands and then general illumination

Last Answer : (d) Few colored bands and then general illumination

Does a 10k ohm resistor resist more than a 10 ohm resistor?

Description : Does a 10k ohm resistor resist more than a 10 ohm resistor?

Last Answer : Higher values mean more resistance.

Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and if no resistance value is fraction

Description : Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and if no resistance value is fraction

Last Answer : Three unequal resistor in parallel are equivalent to a resistance `1` ohm If two of them are in the ratio `1:2` and ... in ohm is A. 4 B. 6 C. 8 D. 12

What voltage would be measured across the 45 ohm resistor?

Description : What voltage would be measured across the 45 ohm resistor?

Last Answer : Not enough information. But if you know the current, you can useOhm's Law (just multiply the resistance times the current).

What is the phase angle of an ohm inductor in series with an ohm resistor connected to a 5 KHz source?

Description : What is the phase angle of an ohm inductor in series with an ohm resistor connected to a 5 KHz source?

Last Answer : You need to provide values of resistor and inductor etc to find the phase angle.

In the illustrated circuit 'A', what power is consumed by a 3 ohm resistor with a 12 volt source? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Description : In the illustrated circuit 'A', what power is consumed by a 3 ohm resistor with a 12 volt source? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Last Answer : Answer: B

In the illustration what is the minimum wattage needed for a 3 ohm resistor with a 12 VDC power source in circuit 'A'? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Description : In the illustration what is the minimum wattage needed for a 3 ohm resistor with a 12 VDC power source in circuit 'A'? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Last Answer : Answer: B

What is the power used in a circuit that has 10 amperes of current through a 10-ohm resistor?

Description : What is the power used in a circuit that has 10 amperes of current through a 10-ohm resistor?

Last Answer : 1 kilowatt.

An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Description : An ammeter with an internal resistance of 50 ohm(s) is used to measure a current thorugh a lod resistor Rl = 1 kohm(s). Determine the percentage error of the reading due to ammeter insertion.

Last Answer : 50/(50+1k)*100 = 4.76%

A current of 5 amps passes through a 10 ohm resistor. What power is dissipated by this resistor under these conditions?

Description : A current of 5 amps passes through a 10 ohm resistor. What power is dissipated by this resistor under these conditions?

Last Answer : ANSWER: 250 WATTS

The potential difference across a 4 ohm resistor is 20 volts. What is the current in the resistor?

Description : The potential difference across a 4 ohm resistor is 20 volts. What is the current in the resistor?

Last Answer : ANSWER: 5 AMPS

A current of 6 amperes flows through a 2 ohm resistor for 30 seconds. How many coulombs of charge have passed through the resistor?

Description : A current of 6 amperes flows through a 2 ohm resistor for 30 seconds. How many coulombs of charge have passed through the resistor? 

Last Answer : ANSWER: 180 COULOMBS

A transformer has a turns ratio of two to one. If a 100 ohm resistor is connected on the high side, its resistance as measured on the low side would be: w) 25 ohms x) 50 ohms y) 100 ohms z) 400 ohms

Description : A transformer has a turns ratio of two to one. If a 100 ohm resistor is connected on the high side, its resistance as measured on the low side would be: w) 25 ohms x) 50 ohms y) 100 ohms z) 400 ohms

Last Answer : ANSWER: W -- 25 OHMS

A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Description : A series circuit consists of a two ohm RESISTOR and a one ohm INDUCTOR. The relationship between current and voltage is: w) current will lag by 30 degrees. x) current will lag by 26 degrees. y) current will lead by 26 degrees. z) current will lead by 30 degrees.

Last Answer : ANSWER: X -- CURRENT WILL LAG BY 26 DEGREES.

A 10 ohm and a 20 ohm resistor are connected in parallel to a current source. What fraction of the current flows through the 20 ohm resistor? w) 1/2 x) 1/3 y) 2/3 z) 3/4

Description : A 10 ohm and a 20 ohm resistor are connected in parallel to a current source. What fraction of the current flows through the 20 ohm resistor? w) 1/2 x) 1/3 y) 2/3 z) 3/4

Last Answer : ANSWER: X -- 1/3

A 20 ohm resistor and a 60 ohm resistor are connected in parallel to a voltage source. If the current in the 60 ohm resistor is one ampere, the current in the 20 ohm resistor will be: w) 1/3 ampere x) 2/3 ampere y) 1 ampere z) 3 amperes

Description : A 20 ohm resistor and a 60 ohm resistor are connected in parallel to a voltage source. If the current in the 60 ohm resistor is one ampere, the current in the 20 ohm resistor will be: w) 1/3 ampere x) 2/3 ampere y) 1 ampere z) 3 amperes

Last Answer : ANSWER: Z -- 3 AMPERES

A current of 5 amps passes through a 10 ohm resistor. How many joules of energy will be generated by this resistor in 2 seconds?

Description : A current of 5 amps passes through a 10 ohm resistor. How many joules of energy will be generated by this resistor in 2 seconds? 

Last Answer : ANSWER: 500 JOULES

A circuit has a resistance of 200 ohms. The resistance of the circuit can be reduced to 120 ohms by adding which of the following to the circuit. w) 80 ohm resistor in series x) 150 ohm resistor in parallel y) 240 ohm resistor in series z) 300 ohm resistor in parallel

Description : A circuit has a resistance of 200 ohms. The resistance of the circuit can be reduced to 120 ohms by adding which of the following to the circuit. w) 80 ohm resistor in series x) 150 ohm resistor in parallel y) 240 ohm resistor in series z) 300 ohm resistor in parallel

Last Answer : ANSWER: Z -- 300 OHM RESISTOR IN PARALLEL

The potential difference across a 4 ohm resistor is 20 volts. Assuming that all of the energy dissipated by this resistor is in the form of heat, how many joules of heat are radiated in 10 seconds?

Description : The potential difference across a 4 ohm resistor is 20 volts. Assuming that all of the energy dissipated by this resistor is in the form of heat, how many joules of heat are radiated in 10 seconds?  

Last Answer : ANSWER: 1000 JOULES

The constant potential difference across a 2 ohm resistor is 20 volts. How many watts of power are dissipated by this resistor?

Description : The constant potential difference across a 2 ohm resistor is 20 volts. How many watts of power are dissipated by this resistor?

Last Answer : ANSWER: 200 WATTS

If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Description : If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Last Answer : If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

An amplifier operating over the frequency range from 18 to 20 MHz has 10 kilo ohm input resistor. What is

Description : An amplifier operating over the frequency range from 18 to 20 MHz has 10 kilo ohm input resistor. What is the r.m.s. noise voltage at the input to this amplifier if the ambient temperature is 27o C

Last Answer : An amplifier operating over the frequency range from 18 to 20 MHz has 10 kilo ohm input resistor. What is the r.m.s. noise voltage at the input to this amplifier if the ambient temperature is 27o C 18.2 microvolt

In a galvanometer, the deflection becomes one half when the galvanometer is shunted by a 20 ohm resistor.

Description : In a galvanometer, the deflection becomes one half when the galvanometer is shunted by a 20 ohm resistor. The galvanometer resistance is 

Last Answer : In a galvanometer, the deflection becomes one half when the galvanometer is shunted by a 20 ohm resistor. The galvanometer resistance is 10 Ohm

With a 12 V supply, a silicon diode, and a 370 - ohm resistor in series, what voltage will be dropped across...

Description : With a 12 V supply, a silicon diode, and a 370 - ohm resistor in series, what voltage will be dropped across the diode? a) 0.3V b) 0.7V c) 0.9V d) 1.4V

Last Answer : 0.7V

A metal resistor has resistance of 10 ohm at 0°C and 11 ohms at 160°C, the temperature coefficient is

Last Answer : A metal resistor has resistance of 10 ohm at 0°C and 11 ohms at 160°C, the temperature coefficient is 0.000625 /°C.

A carbon resistor has the following color bands: The first band is yellow, followed by violet, yellow, and silver. What is the ohmic value of the resistor?

Description : A carbon resistor has the following color bands: The first band is yellow, followed by violet, yellow, and silver. What is the ohmic value of the resistor?

Last Answer : 470,000 ohms (470 kilo ohms).

The colour bands on a carbon composition resistor occur in the sequence: yellow, violet, yellow and silver.

Description : The colour bands on a carbon composition resistor occur in the sequence: yellow, violet, yellow and silver. Its resistance is  (a) 470 KΩ ± 47 KΩ (b) 470 KΩ ± 23.5 % (c) 47 KΩ ± 10 % (d) 47 KΩ ± 5 %

Last Answer : The colour bands on a carbon composition resistor occur in the sequence: yellow, violet, yellow and silver. Its resistance is 47 KΩ ± 10 %

The resistance value of a carbon resistor having Orange, Red, Brown and Golden color bands is

Description : The resistance value of a carbon resistor having Orange, Red, Brown and Golden color bands is

Last Answer : The resistance value of a carbon resistor having Orange, Red, Brown and Golden color bands is 320 Ω ± 5%