Why doesn't the wire get hot in a circuit going from a battery through a light bulb?

Why doesn't the wire get hot in a circuit going from a battery through a light bulb?
by

1 Answer

Answer :

Actually the wire WILL get hot, but specifically HOW MUCH itgets hot depends on the current, and on the resistance of thewire.In most circuits, the resistance of the wire (and thus, theamount of heating) is insignificant, and can safely be ignored formost calculations.
by

Related questions

If a circuit contains a 1.5 volts battery and a bulb with a resistance of 3 ohms. calculate the current?

Description : If a circuit contains a 1.5 volts battery and a bulb with a resistance of 3 ohms. calculate the current?

Last Answer : Use Ohm's Law. Solving for current:I = V/R(current = voltage / resistance)

Is it normal for a light bulb to break and hang from the light fixture by a wire?

Description : Is it normal for a light bulb to break and hang from the light fixture by a wire?

Last Answer : answer:Incandescent bulbs? If so, then yes, they often do that. Turn off the light switch when unscrewing them. If you can’t get the base out, a potato (or in my case a pliers) can assist in getting out the remains. Did you by any chance buy really cheap bulbs?

What is a threadlike wire that gives off light in an electric light bulb that starts with f?

Description : What is a threadlike wire that gives off light in an electric light bulb that starts with f?

Last Answer : Need answer

Endoscope is an instrument used to detect the ulcers in the stomach has a long narrow tube (with a small glowing bulb at one end) which is inserted in to the stomach through the mouth contains. (1) small current carrying wire (2) a narrow tube containing water (3) optical fibre (4) a narrow tube containing some chemical solution

Description : Endoscope is an instrument used to detect the ulcers in the stomach has a long narrow tube (with a small glowing bulb at one end) which is inserted in to the stomach through the mouth contains. ... ) a narrow tube containing water (3) optical fibre (4) a narrow tube containing some chemical solution

Last Answer : (3) optical fibre Explanation: An endoscope can consist of a rigid or flexible tube and a light delivery system to illuminate the organ or object under inspection. The light source is normally outside the ... in the case of rigid endoscopes or a bundle of fiber optics in the case of a fiberscope.

Endoscope is an instrument used to detect the ulcers in the stomach has a long narrow tube (with a small glowing bulb at one end) which is inserted in to the stomach through the mouth contains. (1) small current carrying wire (2) a narrow tube containing water (3) optical fibre (4) a narrow tube containing some chemical solution

Description : Endoscope is an instrument used to detect the ulcers in the stomach has a long narrow tube (with a small glowing bulb at one end) which is inserted in to the stomach through the mouth contains ... ) a narrow tube containing water (3) optical fibre (4) a narrow tube containing some chemical solution 

Last Answer : optical fibre

Two light bulbs are connected in series across a 120 V battery. Bulb 1 uses 40 W of power and Bulb 2 uses

Description : Two light bulbs are connected in series across a 120 V battery. Bulb 1 uses 40 W of power and Bulb 2 uses 20 W of power. If bulb 1 alone is connected to the 120 V source, then it will consume (A) 90 W (B) 80 W (C) 60 W (D) 180 W

Last Answer : Two light bulbs are connected in series across a 120 V battery. Bulb 1 uses 40 W of power and Bulb 2 uses 20 W of power. If bulb 1 alone is connected to the 120 V source, then it will consume 90 W

The current through a flashlight bulb is 40 mA and the total battery voltage is 4.5 V. The

Description : The current through a flashlight bulb is 40 mA and the total battery voltage is 4.5 V. The resistance of the bulb is approximately? A.112 ohms B.11.2 ohms C.1.2 ohms D.18 ohms

Last Answer : 112ohm

How would you make a bulb in a circuit shine with a dimmer light?

Description : How would you make a bulb in a circuit shine with a dimmer light?

Last Answer : Add a resistor between the power source and one side of thebulb.

How do know when electric current is flowing in a light bulb circuit?

Description : How do know when electric current is flowing in a light bulb circuit?

Last Answer : The bulb glows indicating that there is current flow. If thereis any ammeter in the circuit, it reads when there is current flowin the circuit

What happens when a light bulb is broken in a series circuit?

Description : What happens when a light bulb is broken in a series circuit?

Last Answer : In that case, the entire circuit won't work.

How do you know when electric current is flowing in a light bulb circuit?

Description : How do you know when electric current is flowing in a light bulb circuit?

Last Answer : Need answer

What happens when a light bulb is broken in a series circuit?

Description : What happens when a light bulb is broken in a series circuit?

Last Answer : In that case, the entire circuit won't work.

If the voltage supplied to the lighting circuit is 110 volts, how much current is used by a 100 watt light bulb? A. 0.08 amps B. 0.91 amps C. 1.10 amps D. 90.9 amps

Description : If the voltage supplied to the lighting circuit is 110 volts, how much current is used by a 100 watt light bulb? A. 0.08 amps B. 0.91 amps C. 1.10 amps D. 90.9 amps

Last Answer : Answer: B

To test fuses in an energized circuit, you should use a ____________. A. low voltage light bulb B. megohmmeter C. voltmeter D. resistance meter

Description : To test fuses in an energized circuit, you should use a ____________. A. low voltage light bulb B. megohmmeter C. voltmeter D. resistance meter

Last Answer : Answer: C

What can I do about a wall switch for an overhead light if the socket doesn't have a neutral wire and the switch does?

Description : What can I do about a wall switch for an overhead light if the socket doesn't have a neutral wire and the switch does?

Last Answer : answer:This doesn't make sense. The ground wire is the bare-naked copper wire that's a little thinner than the others. In addition to a ground wire, if any, there must be two regular insulated wires ... though they can be wired to switch neutral. For lights it shouldn't matter. Does any of this fit?

An electric bulb is connected on a holder. One end of the wire is connected to the phase and the remaining one connected to earth instead of neutral. The bulb will glow or not? If yes then what is the need of neutral?

Description : An electric bulb is connected on a holder. One end of the wire is connected to the phase and the remaining one connected to earth instead of neutral. The bulb will glow or not? If yes then what is the need of neutral?

Last Answer : 1. Yes the bulb will be glow & neutral is return path of Circuit it is originated from distribution transformers star point, form this point only neutral is taken. 2. Then what is the need ... : It gives assurance of reliable centralized earthling as your home may or may not have reliable earthling.

The wire of flash bulb is made of : (1) Copper (2) Barium (3) Magnesium (4) Silver

Description : The wire of flash bulb is made of : (1) Copper (2) Barium (3) Magnesium (4) Silver

Last Answer : Magnesium

How do I make my own battery powered bulb ?

Description : How do I make my own battery powered bulb ?

Last Answer : You don't have [an old charger], an old battery , a white LED bulb , or two or three , 10 ohms one watt resistor , any switch one. : This is an LED lamp available in the market for ... purse that is fitted only if the lamp is lit while charging the battery will indicate that the battery is charging.

Is there a quick and painless way to find the wattage on a very very hot bulb that I can't turn off?

Description : Is there a quick and painless way to find the wattage on a very very hot bulb that I can't turn off?

Last Answer : answer:So, my solution to your perplexing predicament is this. The problem we have is that you don't know what temperature littlefoot likes most, but you need to be able to remove the halogen bulb ... cage next to the bonfire longways. Then littlefoot can decide how close it too close to stay warm.

In order to prevent the hot metal filament from getting burnt, when the electric current is switched on, the bulb is filled with

Description : In order to prevent the hot metal filament from getting burnt, when the electric current is switched on, the bulb is filled with

Last Answer : In order to prevent the hot metal filament from getting burnt, when the electric current is switched on, the bulb is ... gas C. `CO_(2)` D. `Cl_(2)`

The term "cooling range" in a cooling tower refers to the difference in the temperature of (A) Cold water leaving the tower and the wet bulb temperature of the surrounding air(B) Hot water entering the tower and the wet bulb temperature of thesurrounding air(C) Hot water entering the tower and the cooled water leaving the tower(D) None of these

Description : The term "cooling range" in a cooling tower refers to the difference in the temperature of (A) Cold water leaving the tower and the wet bulb temperature of the surrounding air (B) Hot water entering the ... air (C) Hot water entering the tower and the cooled water leaving the tower (D) None of these

Last Answer : (C) Hot water entering the tower and the cooled water leaving the tower

The term "approach" in a cooling tower refers to the difference in the temperature of the (A) Cold water leaving the tower and the wet bulb temperature of the surrounding air (B) Hot water entering the tower and the wet bulb temperature of the surrounding air (C) Hot water entering and the cooled water leaving the cooling tower (D) None of these

Description : The term "approach" in a cooling tower refers to the difference in the temperature of the (A) Cold water leaving the tower and the wet bulb temperature of the surrounding air (B ... (C) Hot water entering and the cooled water leaving the cooling tower (D) None of these

Last Answer : (A) Cold water leaving the tower and the wet bulb temperature of the surrounding air

Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of forced draft cooling tower is reduced by the recirculation of the humid and hot discharged air (C) A natural draft cooling tower is recommended to be used, when the air humidity is low and air temperature is also low (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Description : Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of ... Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Last Answer : (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

There are 100 light bulbs lined up in a row in a long room. Each bulb has its own switch and is currently switched off. The room has an entry door and an exit door. There are 100 people lined up outside the entry door. Each bulb is numbered consecutively from 1 to 100. So is each person. Person No. 1 enters the room, switches on every bulb, and exits. Person No. 2 enters and flips the switch on every second bulb (turning off bulbs 2, 4, 6, ...). Person No. 3 enters and flips the switch on every third bulb (changing the state on bulbs 3, 6, 9, ...). This continues until all 100 people have passed through the room. What is the final state of bulb No. 64? And how many of the light bulbs are illuminated after the 100th person has passed through the room? -Riddles

Description : There are 100 light bulbs lined up in a row in a long room. Each bulb has its own switch and is currently switched off. The room has an entry door and an exit door. There are 100 people ... And how many of the light bulbs are illuminated after the 100th person has passed through the room? -Riddles

Last Answer : First think who will operate each bulb, obviously person #2 will do all the even numbers, and say person #10 will operate all the bulbs that end in a zero. So who would operate for example bulb 48: Persons numbered: 1 & 48 ... 100 (1, 4, 9, 16, 25, 36, 49, 64, 81 & 100) hence 10 bulbs remain on.

How many electrons flow through a light bulb each second if the current through the light bulb is A?

Description : How many electrons flow through a light bulb each second if the current through the light bulb is A?

Last Answer : Need answer

Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Description : Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Last Answer : (C) Coke oven battery heating

What is the function of a fuse wire? (a) To prevent an unduly high electric current from passing through a circuit (b) To increase the current supply (c) To decrease the current supply (d) To stabilise the voltage

Description : What is the function of a fuse wire? (a) To prevent an unduly high electric current from passing through a circuit (b) To increase the current supply (c) To decrease the current supply (d) To stabilise the voltage

Last Answer : Ans:(a)

How to stop a signal going through a wire?

Description : How to stop a signal going through a wire?

Last Answer : Use a switch or a variable resistor

If you remove one bulb from a string of lights all the remaining lights will go out. are the lights in a series circuit or parallel circuit Explain?

Description : If you remove one bulb from a string of lights all the remaining lights will go out. are the lights in a series circuit or parallel circuit Explain?

Last Answer : Removing any bulb breaks the continuity of a series circuit, stopping the flow of electrical current. Removing a bulb in a parallel circuit does not interrupt the current flow, so the remaining lights continue to conduct electrical current.

Why the other bulb remains lighted when you unscrewed one of them in a parallel circuit?

Description : Why the other bulb remains lighted when you unscrewed one of them in a parallel circuit?

Last Answer : In a parallel circuit, in this case the electrons still have a complete circuit. For example, if it is a DC circuit, the electrons can still go from the negative terminal of a battery, pass through the bulb thatis not unscrewed, and continue to the positive terminal in the battery.

If the filament of the bulb is broken would the circuit be complete?

Description : If the filament of the bulb is broken would the circuit be complete?

Last Answer : If the bulb's filament is broken, the whole circuit becomes open. If the bulb is in a series circuit or is the only bulb, the electricity would no longer flow. If the bulb is in a parallel circuit, along with other bulbs, then only the blown bulb would go out, and the other bulbs would still work.

When replacing component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its base B. there is a danger of phosphor poisoning should 'B''s bulb break C. component 'D' must be closed during the replacement to provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Description : When replacing component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its ... provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Last Answer : Answer: D

When changing out component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its base B. there is a danger of phosphor poisoning should 'B''s bulb break C. component 'D' must be closed during the replacement to provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Description : When changing out component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its ... provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Last Answer : Answer: D

Suggest a reason for a bulb blowing in an electric circuit.

Description : Suggest a reason for a bulb blowing in an electric circuit.

Last Answer : Ans: too much current flowing through the bulb 

Circuit diagram at tungsten filament bulb

Description : Circuit diagram at tungsten filament bulb

Last Answer : Circuit diagram at tungsten filament bulb

How do you fasten a piece of wire to a battery?

Description : How do you fasten a piece of wire to a battery?

Last Answer : You don’t, unless you’re planning to throw the shaver away when the battery is dead. Use springs to maintain contact.

An electron in potentiometer experiences a force `2.4xx10^(-19)N`. The length of potentiometer wire is 6m. The emf of the battery connected across the

Description : An electron in potentiometer experiences a force `2.4xx10^(-19)N`. The length of potentiometer wire is 6m. The emf of the battery connected across the

Last Answer : An electron in potentiometer experiences a force `2.4xx10^(-19)N`. The length of potentiometer wire is 6m. The emf of ... 6 V B. 9 V C. 12 V D. 15 V

A potentiometer wire of length 10 m and resistance `10 Omega` per meter is connected in serice with a resistance box and a 2 volt battery. If a potent

Description : A potentiometer wire of length 10 m and resistance `10 Omega` per meter is connected in serice with a resistance box and a 2 volt battery. If a potent

Last Answer : A potentiometer wire of length 10 m and resistance `10 Omega` per meter is connected in serice with a ... Omega` C. `190 Omega` D. `90 Omega`

The length of a wire of a potentiometer is 100 cm, and the e.m.f. of its standard cell is E volt. It is employed to measure the e.m.f. of a battery wh

Description : The length of a wire of a potentiometer is 100 cm, and the e.m.f. of its standard cell is E volt. It is employed to measure the e.m.f. of a battery wh

Last Answer : The length of a wire of a potentiometer is 100 cm, and the e.m.f. of its standard cell is E ... current in the potentiometer wire D. `(30E)/(100)`

AB is a potentiometer wire of length 100 cm and its resistance is `10Omega`. It is connected in series with a resistance R = 40 `Omega` and a battery

Description : AB is a potentiometer wire of length 100 cm and its resistance is `10Omega`. It is connected in series with a resistance R = 40 `Omega` and a battery

Last Answer : AB is a potentiometer wire of length 100 cm and its resistance is `10Omega`. It is connected in series with a ... `1.6V` C. `0.08V` D. `0.16V`

A 2 V battery, a `990Omega` resistor and a potentiometer of 2 m length, all are connected in series of the resistance of potentiometer wire is `10Omeg

Description : A 2 V battery, a `990Omega` resistor and a potentiometer of 2 m length, all are connected in series of the resistance of potentiometer wire is `10Omeg

Last Answer : A 2 V battery, a `990Omega` resistor and a potentiometer of 2 m length, all are connected in series of the resistance ... 0.01Vm^(-1)` D. `0.1Vm^(-1)`

A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V battery, the resistivity of wire is

Description : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V battery, the resistivity of wire is

Last Answer : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V ... `4xx10^(-6)Omega-m` D. `1xx10^(-6)Omega-m`

Potentiometer wire of length `1 m` is connected in series with `490 Omega` resistance and `2 V` battery. If `0.2 mV/cm` is the potential gradient, the

Description : Potentiometer wire of length `1 m` is connected in series with `490 Omega` resistance and `2 V` battery. If `0.2 mV/cm` is the potential gradient, the

Last Answer : Potentiometer wire of length `1 m` is connected in series with `490 Omega` resistance and `2 V` battery. If ... 7.9Omega` C. `5.9Omega` D. `6.9Omega`

A coil is wound with 400 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 4.8 amps B. 7.06 amps C. 10.65 amps D. 11.27 amps

Description : A coil is wound with 400 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 4.8 amps B. 7.06 amps C. 10.65 amps D. 11.27 amps

Last Answer : Answer: B

A coil is wound with 200 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 1.14 amps B. 7.04 amps C. 10.22 amps D. 14.08 amps

Description : A coil is wound with 200 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 1.14 amps B. 7.04 amps C. 10.22 amps D. 14.08 amps

Last Answer : Answer: D

The sulphur in sulphur sodium battery is absorbed by___ sponge. • Sodium • Carbon • Wire • Cellulose

Description : The sulphur in sulphur sodium battery is absorbed by___ sponge. • Sodium • Carbon • Wire • Cellulose

Last Answer : • Carbon

When two ends of a circular uniform wire are joined to the terminals of a battery, the field at the center of the circle

Last Answer : When two ends of a circular uniform wire are joined to the terminals of a battery, the field at the center of the circle will depend on the radius of the circle.

why the amerylli bulb going smaller and smaller every year?

Description : why the amerylli bulb going smaller and smaller every year?

Last Answer : Try planting it in new inside vitamin soil for inside plants when it is time to replant again.

In the circuit shown in Fig. 4.63, the terminal voltage of the battery is 6.0 V. Find the current I through the `18 Omega` resistor.

Description : In the circuit shown in Fig. 4.63, the terminal voltage of the battery is 6.0 V. Find the current I through the `18 Omega` resistor.

Last Answer : In the circuit shown in Fig. 4.63, the terminal voltage of the battery is 6.0 V. Find the current I through the `18 Omega` resistor.

If a battery sends a current of 10A through a circuit for one hour how many coulombs will flow through the circuit?

Description : If a battery sends a current of 10A through a circuit for one hour how many coulombs will flow through the circuit?

Last Answer : 36,000 coulombs