What is the Taiga's high and low temperatures?

What is the Taiga's high and low temperatures?
by

1 Answer

Answer :

What is the answer ?
by

Related questions

What are the typical vegetation and the typical fauna of the taigas ?

Description : What are the typical vegetation and the typical fauna of the taigas ?

Last Answer : Taiga, or the boreal forest, is characterized by coniferous trees, pine forests. There are also mosses, lichens, small bushes, and angiosperms. In the taiga many mammals, like moose, wolves, ... rodents, migratory birds and great diversity of insects are found. Biomes - Image Diversity: taigas

How does the high/low temperatures, the barometric pressure, and the relative humidity influence what kinds of clouds are out?

Description : How does the high/low temperatures, the barometric pressure, and the relative humidity influence what kinds of clouds are out?

Last Answer : answer:Yikes. The formation of clouds is an application of the First Law of Thermodynamics. According to the First Law, a change in the internal energy of a system can be due to the ... for air under these conditions is the moist adiabatic lapse rate and is approximately -5oC per kilometer.

Superconductors are those elements – (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperature (3) Which conduct electricity only at super-high temperature (4) Which conduct electricity only, at super-high temperatures

Description : Superconductors are those elements – (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperature (3) Which conduct electricity only at super-high temperature (4) Which conduct electricity only, at super-high temperatures

Last Answer : (2) Whose resistance falls almost to zero at very low temperature Explanation: Superconductivity is a phenomenon of exactly zero electrical resistance and expulsion of magnetic fields occurring in ... lines from the interior of the superconductor as it transitions into the superconducting state.

Cryogenic is a science deals with - (1) High Temperatures (2) Low Pressure (3) High Pressure (4) Low Temperature

Description : Cryogenic is a science deals with - (1) High Temperatures (2) Low Pressure (3) High Pressure (4) Low Temperature

Last Answer : (4) Low Temperature Explanation: Cryogenics is the branch of physics that deals with the production and effects of very low temperatures.

'Cryogenics' is a science dealing with – (1) high temperatures (2) low temperatures (3) friction and wear (4) growth of crystals

Description : 'Cryogenics' is a science dealing with – (1) high temperatures (2) low temperatures (3) friction and wear (4) growth of crystals

Last Answer : (2) low temperatures Explanation: Cryogenics is the study of how to get to low temperatures and of how materials behave when they get there. Besides the familiar temperature scales of Fahrenheit and ... modern processes being used to treat metals (as well as other materials) is cryogenic tempering.

Which of the following conditions indicates that a lead-acid battery is being charged too rapidly? A. Sparks occurring at the positive terminal. B. Unusually high electrolyte specific gravity. C. Low plate potentials being developed. D. Excessively high temperatures and gassing rates.

Description : Which of the following conditions indicates that a lead-acid battery is being charged too rapidly? A. Sparks occurring at the positive terminal. B. Unusually high electrolyte specific gravity. C. Low plate potentials being developed. D. Excessively high temperatures and gassing rates.

Last Answer : Answer: D

Electrical machinery insulation will break down more rapidly due to _________________. A. low loading of motors and generators B. frequent megger testing C. high temperatures and vibration D. high operating frequencies

Description : Electrical machinery insulation will break down more rapidly due to _________________. A. low loading of motors and generators B. frequent megger testing C. high temperatures and vibration D. high operating frequencies

Last Answer : Answer: C

A semiconductor is a material with a _____________. A. conductivity higher than a normal conductor B. conductivity higher than a normal insulator C. high conductivity at low temperatures D. low conductivity at high temperatures

Description : A semiconductor is a material with a _____________. A. conductivity higher than a normal conductor B. conductivity higher than a normal insulator C. high conductivity at low temperatures D. low conductivity at high temperatures

Last Answer : Answer: B

Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Description : Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Last Answer : Answer: C

Where a thermal-acting breaker is required to be used in an area of unusually high, low, or constantly fluctuating temperatures, an ambient compensating element must be used. This element consists of a ______________. A. cylindrical spring on the contact arm B. conical spring on the contact arm C. second bimetal element D. second electromagnet

Description : Where a thermal-acting breaker is required to be used in an area of unusually high, low, or constantly fluctuating temperatures, an ambient compensating element must be used. This element consists of ... arm B. conical spring on the contact arm C. second bimetal element D. second electromagnet

Last Answer : Answer: C

Thermocouple is suitable for measuring (A) Liquid temperatures only (B) Very high temperatures only (C) Very low temperatures only (D) Both high and low temperatures

Description : Thermocouple is suitable for measuring (A) Liquid temperatures only (B) Very high temperatures only (C) Very low temperatures only (D) Both high and low temperatures

Last Answer : (D) Both high and low temperatures

For a dielectric which of the following properties hold good? a) They are superconductors at high temperatures b) They are superconductors at low temperatures c) They can never become a superconductor d) They have very less dielectric breakdown voltage

Description : For a dielectric which of the following properties hold good? a) They are superconductors at high temperatures b) They are superconductors at low temperatures c) They can never become a superconductor d) They have very less dielectric breakdown voltage

Last Answer : b) They are superconductors at low temperatures

Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the reaction is practically irreversible in nature (C) The intercept of the Arrhenius plot is called the 'activation energy' (D) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Description : Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the ... ) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Last Answer : (C) The intercept of the Arrhenius plot is called the 'activation energy

When applying to pressure ratings listed in ASME B16.5 at high or low temperatures which of the following must be considered? a) Risk of leakage due to forces and moments developed. b) Bursting of the flanged fitting. c) The bolting forces at the flange. d) All of the above.

Description : When applying to pressure ratings listed in ASME B16.5 at high or low temperatures which of the following must be considered? a) Risk of leakage due to forces and moments developed. b) Bursting of the flanged fitting. c) The bolting forces at the flange. d) All of the above.

Last Answer : a) Risk of leakage due to forces and moments developed.

Superconductors are those elements (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperatures (3) which turn into insulators at very low temperatures (4) which conduct electricity only at super-high temperatures

Description : Superconductors are those elements (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperatures (3) which turn into insulators at very low temperatures (4) which conduct electricity only at super-high temperatures

Last Answer : Whose resistance falls almost to zero at very low temperatures

‘Cryogenics’ is a science dealing with (1) high temperatures (2) low temperatures (3) friction and wear (4) growth of crystals

Description : ‘Cryogenics’ is a science dealing with (1) high temperatures (2) low temperatures (3) friction and wear (4) growth of crystals

Last Answer : low temperatures

What ice melt will be effective on my driveway at very low temperatures, while doing very little damge to my lawn.

Description : What ice melt will be effective on my driveway at very low temperatures, while doing very little damge to my lawn.

Last Answer : Kitty litter works but it is expensive.

The science dealing with the study of phenomena at very low temperatures is known as (a) refrigenics (b) cytogenics (c) frozenics (d) cryogenics

Description : The science dealing with the study of phenomena at very low temperatures is known as (a) refrigenics (b) cytogenics (c) frozenics (d) cryogenics

Last Answer : Ans:(d)

Consider the following statements 1. Large cold storage plants use ammonia as refrigerant while domestic refrigerators use chlorofluorocarbons. 2. Ammonia can be liquefied at ambient temperatures and at low pressures. 3. Chlorofluorocarbons are air pollutants. The correct statement(s) is/are: (a) 1 and 3 only (b) 2 and 3 only (c) 1, 2 and 3 (d) 3 only

Description : Consider the following statements 1. Large cold storage plants use ammonia as refrigerant while domestic refrigerators use chlorofluorocarbons. 2. Ammonia can be liquefied at ambient temperatures and at low pressures. 3. Chlorofluorocarbons are ... 3 only (b) 2 and 3 only (c) 1, 2 and 3 (d) 3 only

Last Answer : Ans:(a)

The study of phenomena at very low temperatures is called - (1) heat transfer (2) morphology (3) crystallography (4) cryogenics

Description : The study of phenomena at very low temperatures is called - (1) heat transfer (2) morphology (3) crystallography (4) cryogenics

Last Answer : (4) cryogenics Explanation: A person who studies elements that have been subjected to extremely cold temperatures is called a cryogenicist.

Which of the following principle is used to produce low-temperatures'? (1) Super conductivity (2) Joule-Kelvin effect (3) Thermo-electric effect (4) Adiabatic demagnetization

Description : Which of the following principle is used to produce low-temperatures'? (1) Super conductivity (2) Joule-Kelvin effect (3) Thermo-electric effect (4) Adiabatic demagnetization

Last Answer : (4) Adiabatic demagnetization Explanation: Magnetic refrigeration is a cooling technology based on the magnetocaloiic effect. This technique can be used to attain extremely low temperatures, as well as the ... of a suitable material is caused by exposing the material to a changing magnetic field.

In addition to short circuits and sustained overloads, fuses are likely to blow due to _____________. A. loose fuse clips B. low ambient temperatures C. low contact resistance D. all of the above

Description : In addition to short circuits and sustained overloads, fuses are likely to blow due to _____________. A. loose fuse clips B. low ambient temperatures C. low contact resistance D. all of the above

Last Answer : Answer: A

When a battery is continuously exposed to low temperatures, the best procedure to keep it from freezing is to _________. A. remove the battery caps B. securely cover the battery C. keep the battery fully charged D. disconnect the battery

Description : When a battery is continuously exposed to low temperatures, the best procedure to keep it from freezing is to _________. A. remove the battery caps B. securely cover the battery C. keep the battery fully charged D. disconnect the battery

Last Answer : Answer: C

Which of the following procedures represents the best method to prevent the freezing of batteries continuously exposed to low temperatures? A. The battery caps should be removed. B. The battery cap vents should be sealed. C. The battery should be kept in a fully charged condition. D. The battery should be disconnected from its charging source.

Description : Which of the following procedures represents the best method to prevent the freezing of batteries continuously exposed to low temperatures? A. The battery caps should be removed. B. The battery cap ... in a fully charged condition. D. The battery should be disconnected from its charging source.

Last Answer : Answer: C

Aniline reacts with nitrous acid at low temperatures to give (a) a N-nitrosoamine (b) a nitrile (c) a diazonium salt (d) a nitrite salt

Description : Aniline reacts with nitrous acid at low temperatures to give (a) a N-nitrosoamine (b) a nitrile (c) a diazonium salt (d) a nitrite salt

Last Answer : a diazonium salt

If the furnace is provided with insufficient fuel at low temperatures, the type of pig iron produced, is called (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Description : If the furnace is provided with insufficient fuel at low temperatures, the type of pig iron produced, is called (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Last Answer : Answer: Option C

What must be considered when using flanges at the ratings listed in ASME B16.5 at low temperatures? a) Toughness. b) Shock loadings. c) Sudden changes of stress or temperature. d) All of the above.

Description : What must be considered when using flanges at the ratings listed in ASME B16.5 at low temperatures? a) Toughness. b) Shock loadings. c) Sudden changes of stress or temperature. d) All of the above.

Last Answer : c) Sudden changes of stress or temperature.

Hyperthermophiles are micro organism which live at ____________. a) temperatures between 80^o-122^0 c)cold desert b) very low temperatures d)salt water lake

Description : Hyperthermophiles are micro organism which live at ____________. a) temperatures between 80^o-122^0 c)cold desert b) very low temperatures d)salt water lake

Last Answer : a) temperatures between 80^o-122^0

____ organisms tolerate low temperatures and can grow under refrigeration. a. Psychrophilic c. Psychrotrophic b. Mesophilic d. Thermotrophic

Description : ____ organisms tolerate low temperatures and can grow under refrigeration. a. Psychrophilic c. Psychrotrophic b. Mesophilic d. Thermotrophic

Last Answer : c. Psychrotrophic

Cryogenics is: (1) A scientific study of dust (2) Study of heat (3) Scientific study of very low temperatures (4) Study of genesis

Description : Cryogenics is: (1) A scientific study of dust (2) Study of heat (3) Scientific study of very low temperatures (4) Study of genesis

Last Answer : Scientific study of very low temperatures

Which of the following principle is used to produce ‘low-temperatures’ ? (1) Super conductivity (2) Joule-Kelvin effect (3) Thermo-electric effect (4) Adiabatic demagneti-sation

Description : Which of the following principle is used to produce ‘low-temperatures’ ? (1) Super conductivity (2) Joule-Kelvin effect (3) Thermo-electric effect (4) Adiabatic demagneti-sation

Last Answer : Adiabatic demagneti-sation

Materials, whose resistivity at very low temperatures plunges from a finite value to zero and remains there...

Description : Materials, whose resistivity at very low temperatures plunges from a finite value to zero and remains there upon further cooling, are known as

Last Answer : Materials, whose resistivity at very low temperatures plunges from a finite value to zero and remains there upon further cooling, are known as Superconductors

Would air trapped between layers of glass cause the glass to break when heated to high temperatures?

Description : Would air trapped between layers of glass cause the glass to break when heated to high temperatures?

Last Answer : answer:When heating, you're essentially increasing the pressure exerted by the air on the glass in which it's trapped. As the air has no means of escape if enough heat is added the increased pressure ... just putting in a single sheet and seeing if you get the same results without the air pressure.

Adhesive tape to affix rubber to carpet in high temperatures?

Description : Adhesive tape to affix rubber to carpet in high temperatures?

Last Answer : just glue them

A plant in your garden avoids photorespiratory losses, has improved water use efficiency shows high rates of photosynthesis at high temperatures and h

Description : A plant in your garden avoids photorespiratory losses, has improved water use efficiency shows high rates of photosynthesis at high temperatures and h

Last Answer : A plant in your garden avoids photorespiratory losses, has improved water use efficiency shows high rates of ... B. C-4 C. CAM D. Nitrogen fixer

In high mountains, large changes in mean temperatures occur over short distances. 

Description : In high mountains, large changes in mean temperatures occur over short distances. 

Last Answer : Identify the correct correlation: A - In high mountains, large changes in mean temperatures occur over ... R is not the correct explanation of A.

What is a word that means a fourth state occurs only at very high temperatures and is not common on Earth.?

Description : What is a word that means a fourth state occurs only at very high temperatures and is not common on Earth.?

Last Answer : Need answer

What was creamic made of fine clay baked at very high temperatures?

Description : What was creamic made of fine clay baked at very high temperatures?

Last Answer : porcelain

Which characteristic of the Sun primarily determines the orbits of planets in our solar system A Large volume B Strong gravitational field C Mostly made of hydrogen D High surface temperatures?

Description : Which characteristic of the Sun primarily determines the orbits of planets in our solar system A Large volume B Strong gravitational field C Mostly made of hydrogen D High surface temperatures?

Last Answer : B (gravity)

Which planet has high temperatures due to the runaway greenhouse effect?

Description : Which planet has high temperatures due to the runaway greenhouse effect?

Last Answer : venus :)

Which planet has high temperatures due to the runaway greenhouse effect?

Description : Which planet has high temperatures due to the runaway greenhouse effect?

Last Answer : venus :)

Which of the following statements is not true about diamonds? (a) It is the purest form of carbon (b) It is the hardest naturally occurring substance (c) It is a good conductor of electricity (d) Artificial diamonds can be prepared by subjecting a solution of pure carbon in iron to very high pressures and temperatures

Description : Which of the following statements is not true about diamonds? (a) It is the purest form of carbon (b) It is the hardest naturally occurring substance (c) It is a good conductor of ... diamonds can be prepared by subjecting a solution of pure carbon in iron to very high pressures and temperatures

Last Answer : Ans:(c)

Which one of the following groups of organisms is thermophilic in that they can tolerate and grow at fairly high temperatures? (a) Certain bacteria and blue-green algae (b) Loris, rhesus monkey and red kangaroo (c) Llamas, camels and yaks (d) Bison, musk-ox and racoon

Description : Which one of the following groups of organisms is thermophilic in that they can tolerate and grow at fairly high temperatures? (a) Certain bacteria and blue-green algae (b) Loris, rhesus monkey and red kangaroo (c) Llamas, camels and yaks (d) Bison, musk-ox and racoon

Last Answer : Ans:(a)

The water core disease of apples is caused by (a) boron deficiency (b) bacterial infection (c) fungal infection (d) high temperatures

Description : The water core disease of apples is caused by (a) boron deficiency (b) bacterial infection (c) fungal infection (d) high temperatures

Last Answer : Ans:(d)

(4) Liquid Hydrogen + Liquid Oxygen Explanation: LOX and liquid hydrogen, used in the Space Shuttle orbiter, the Centaur upper stage of the Atlas V, Saturn V upper stages, the newer Delta IV rocket, the H-IIA rocket, and most stages of the European Ariane rockets. Liquid fueled rocicets have higher specific impulse than solid rockets and are capable of being throttled, shut down, and restarted. Only the combustion chamber of a liquid fueled rocket needs to withstand high combustion pressures and temperatures and they can be regeneratively cooled by the liquid propellant.

Description : (4) Liquid Hydrogen + Liquid Oxygen Explanation: LOX and liquid hydrogen, used in the Space Shuttle orbiter, the Centaur upper stage of the Atlas V, Saturn V upper stages, the ... to withstand high combustion pressures and temperatures and they can be regeneratively cooled by the liquid propellant.

Last Answer : The BOD values of water indicate the (1) amount of organic debris (2) amount of oxygen used for biochemical oxidation (3) amount of oxygen used for biochemical reduction (4) amount of ozone used for biochemical oxidation

Which of the following metals is used in Space Crafts to withstand high temperatures? (1) Fe (2) Ti (3) Ni (4) Pb

Description : Which of the following metals is used in Space Crafts to withstand high temperatures? (1) Fe (2) Ti (3) Ni (4) Pb

Last Answer : (2) Ti Explanation: Titanium alloy, which has high corrosion resistance, high specific strength, and good heat resistance, is used for different spacecraft parts including outer fuel tank sheathing and wings. It is extremely strong at high temperatures.

Pycnometer is an instrument used to measure the – (1) Density (2) Intensity of solar radiation (3) Intensity of earthquake (4) High temperatures

Description : Pycnometer is an instrument used to measure the – (1) Density (2) Intensity of solar radiation (3) Intensity of earthquake (4) High temperatures

Last Answer : (1) Density Explanation: A gas pycnometer is a laboratory device used for measuring the density - or more accurately the volume - of solids, be they regularly shaped, porous or non-porous, ... , employing some method of has displacement and the volume-pressure relationship known as Boyle's Law.

Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Description : Molten sodium (as a coolant in fast breeder reactor) (A) Can’t attain high temperature at normal pressure (B) Is not at all corrosive, even at a higher temperature (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water (D) None of these

Last Answer : (C) Is highly radioactive at elevated temperatures and can cause explosion, when it comes in contact with air or water

Which of the following statements is correct? (a) Sporopollenin can be degraded by enzymes. (b) Sporopollenin is made up of inorganic materials. (c) Sporopollenin can withstand high temperatures as well as strong acids and alkalis. (d) Sporopollenin can withstand high temperatures but not strong acids.

Description : Which of the following statements is correct? (a) Sporopollenin can be degraded by enzymes. (b) Sporopollenin is made up of inorganic materials. (c) Sporopollenin can withstand high temperatures ... strong acids and alkalis. (d) Sporopollenin can withstand high temperatures but not strong acids.

Last Answer : (c) Sporopollenin can withstand high temperatures as well as strong acids and alkalis