Democratic material (a) Diamond (b) Titanium (c) Iron (d) Gold

Democratic material (a) Diamond (b) Titanium (c) Iron (d) Gold 
by

1 Answer

Answer :

(c) Iron
by

Related questions

First material known to be used by man (a) Cotton (b) Bronze (c) Iron (d) Rock

Description : First material known to be used by man (a) Cotton (b) Bronze (c) Iron (d) Rock 

Last Answer : (d) Rock 

Presently most used metal in the world (a) Aluminium (b) Gold (c) Steel (d) Silver

Description : Presently most used metal in the world (a) Aluminium (b) Gold (c) Steel (d) Silver

Last Answer : (c) Steel 

What Is Allot Rope? In What Forms Of Cubic Pattern, Iron Exists?

Description : What Is Allot Rope? In What Forms Of Cubic Pattern, Iron Exists?

Last Answer : Some elements exist in more than one crystalline form. Each crystalline form is known as ‘allotrope’ of the element. Iron exists in two crystalline forms of cubic pattern, namely, bodycentered cubic (BCC) and face-centered cubic (FCC).

What Is The Name Of Solid Solution Of Carbon In Alpha-iron And Delta Iron?

Description : What Is The Name Of Solid Solution Of Carbon In Alpha-iron And Delta Iron?

Last Answer : Ferrite and Austenite respectively.

What Is The Percentage Of Carbon In Cast Iron?

Description : What Is The Percentage Of Carbon In Cast Iron?

Last Answer : 2.5%.

First metal known to be used by man (a) Iron (b) Bronze (c) Silver (d) Aluminium

Description : First metal known to be used by man (a) Iron (b) Bronze (c) Silver (d) Aluminium 

Last Answer : (b) Bronze

When A Material Is Known As Allotropy Or Polytropic?

Description : When A Material Is Known As Allotropy Or Polytropic?

Last Answer : A material is known as allotropic aur polytropic if it exists in several forms at a different temperature.

Why Is It That The Maximum Value Which The Residual Stress Can Reach Is The Elastic Limit Of The Material?

Description : Why Is It That The Maximum Value Which The Residual Stress Can Reach Is The Elastic Limit Of The Material?

Last Answer : A stress more than the elastic limit, with no external force to oppose it, we relieve itself by plastic deformation until it reaches the value of the yield stress.

Detrimental property of a material for shock load applications (a) High density (b) Low toughness (c) High strength (d) Low hardness

Description : Detrimental property of a material for shock load applications (a) High density (b) Low toughness (c) High strength (d) Low hardness  

Last Answer : (b) Low toughness

Hydrogen Cannot Be Removed Easily From Molten Steel. What Harm Hydrogen Has On Property Of Steel?

Description : Hydrogen Cannot Be Removed Easily From Molten Steel. What Harm Hydrogen Has On Property Of Steel?

Last Answer : Excessive hydrogen in molten steel results in the formation of small fissures often described as hairline cracks or flakes in the steel. Large forgings an alloy steel are particularly sensitive to this phenomenon.

How Oxygen Gas Can Be Removed From Steel During Melting? What Are Fully Killed Steel?

Description : How Oxygen Gas Can Be Removed From Steel During Melting? What Are Fully Killed Steel?

Last Answer : Oxygen gas can be removed from steel during melting by adding elements such as manganese, silicon or aluminium which, because of their high affinity for oxygen, react with it to form non-metallic ... Steels in which have has most of their dissolved oxygen removed are called fully killed steels'.

For Which Parts The Wahl Factor And Lewis Factor Is Used?

Description : For Which Parts The Wahl Factor And Lewis Factor Is Used?

Last Answer : Wahl factor and Lewis factor is used for springs and gears respectively.

Give One Example Each Of The Following Proportion Of Materials – Dimensional, Physical, Technological And Mechanical?

Description : Give One Example Each Of The Following Proportion Of Materials – Dimensional, Physical, Technological And Mechanical?

Last Answer : Roughness, enthalpy, toughness and hardness respectively.

Explain The Difference Between Pear Lite And Cementite?

Description : Explain The Difference Between Pear Lite And Cementite?

Last Answer : Pearlite is a eutectoid mixture of ferrite and cementite. Cementide is a chemical compound of iron and carbon.

Give One Example Of Metal Classified As Per Structure As Bcc, Fcc, Hcp And Ccp?

Description : Give One Example Of Metal Classified As Per Structure As Bcc, Fcc, Hcp And Ccp?

Last Answer : Examples of BCC, FCC, HCP and CCP structures: BCC (Body Centred Cubic) structure – molybdenum; FCC (Face Centred Cubic) structure – Aluminum; HCP (Hexagonal Close Packed) structure – Zinc; CCP (Cubic Close Packing) structure – Copper.

Define Ceramic?

Description : Define Ceramic?

Last Answer : Ceramic is a solid formed by the combination of metallic and non-metallic elements.

What Does The Alloy Designation Fg 250 Indicate?

Description : What Does The Alloy Designation Fg 250 Indicate?

Last Answer : FG 250 alloy designation indicates Grey cast iron with a tensile strength of 250 MPa.

What Is The Common Element Between The Brass And Bronze Metal Alloys?

Description : What Is The Common Element Between The Brass And Bronze Metal Alloys?

Last Answer : Copper.

Which Theories Of Failure Are Used For? (a) Ductile Materials (b) Brittle Materials?

Description : Which Theories Of Failure Are Used For? (a) Ductile Materials (b) Brittle Materials?

Last Answer : For ductile materials, theories of failure used are maximum shear stress theory and maximum energy of distortion theory; For brittle materials, the theory of maximum principal stress and maximum strain are used.

List At Least Two Factors That Promote The Transition From Ductile To Brittle Fracture?

Description : List At Least Two Factors That Promote The Transition From Ductile To Brittle Fracture?

Last Answer : The manner of loading and the rate of loading promote the transition from ductile to brittle fracture. A machine member may have ductile failure under static loading but may fail in brittle fashion when the ... testing speed, but if the load is applied at a high velocity then failure may be brittle.

While Normal Carburizing And Nit Riding Surface Treatments Increase Fatigue Strength, Excessive Treatment May Decrease The Fatigue Strength. Why?

Description : While Normal Carburizing And Nit Riding Surface Treatments Increase Fatigue Strength, Excessive Treatment May Decrease The Fatigue Strength. Why?

Last Answer : Normal carburizes/nits riding treatments increases volume due to phase transformation at the surface and introduce residual compressive surface stress and thus increases fatigue strength. By excessive treatment, the ... in the regions of the high tensile stress and lead o early fatigue failure.

Distinguish Between Creep And Fatigue?

Description : Distinguish Between Creep And Fatigue?

Last Answer : Creep is low and progressive deformation of a material with time under a constant stress at high-temperature applications. Fatigue is the reduced tendency of material to offer resistance to applied stress under repeated or fluctuating loading condition.

Why Fatigue Strength Decreases As Size Of A Part Increases Beyond Around 10mm?

Description : Why Fatigue Strength Decreases As Size Of A Part Increases Beyond Around 10mm?

Last Answer : The perfection of material conditions is possible at lower sizes, and as size increases, it is not possible to attain a uniform structure of the material.

Whether Individual Components In Composite Materials Retain Their Characteristics Or Not?

Description : Whether Individual Components In Composite Materials Retain Their Characteristics Or Not?

Last Answer : Yes.

Which Element Is Added In Steel To Increase Resistance To Corrosion?

Description : Which Element Is Added In Steel To Increase Resistance To Corrosion?

Last Answer : Chromium.

Specific Strength Of Materials Is Very High When They Are In Fibre Size But Lower When They Are In Bar Form - Why?

Description : Specific Strength Of Materials Is Very High When They Are In Fibre Size But Lower When They Are In Bar Form - Why?

Last Answer : The crystal structure has ordered, repeating arrangement of atoms. Fibers are liable to maintain this and thus have high specific strength. As for size increases, the condition of ordered and ... because of several types of defects and dislocations, and thus the specific strength gets lower.

What Is Curie Point?

Description : What Is Curie Point?

Last Answer : Curie point is the temperature at which ferromagnetic materials can no longer be magnetized by outside forces.

What Are The Principal Constituents Of Brass?

Description : What Are The Principal Constituents Of Brass?

Last Answer : Principal constituents of brass are copper and zinc.

Mention Two Types Of Dislocations?

Description : Mention Two Types Of Dislocations?

Last Answer : Dislocation refers to a break in the continuity of the lattice. In an edge dislocation, one plane of atoms gets squeezed out. In screw dislocation, the lattice atoms move from their regular ideal positions.

Explain The Effects Of Alloying Chromium And Nickel In Stainless Steel.?

Description : Explain The Effects Of Alloying Chromium And Nickel In Stainless Steel.?

Last Answer : The addition of nickel and chromium increases the tensile strength and increase in resistance to corrosion takes place.

What Properties Are Needed To Be Considered For Application Calling For Following Requirements? I) Rigidity. Ii) Strength Of No Plastic Deformation Under Static Load. Iii) Strength To Withstand Overload Without Fracture.

Description : What Properties Are Needed To Be Considered For Application Calling For Following Requirements? I) Rigidity. Ii) Strength Of No Plastic Deformation Under Static Load. Iii) Strength To Withstand Overload Without Fracture.

Last Answer : i) Reliability – elastic modulus and yield strength. ii) Strength (for no plastic deformation under static loading) – yield point. iii) Strength (overload) – Toughness and impact resistance. iv) Wear resistance – Hardness. v) Reliability and safety – Endurance limit and yield.

A Plain Carbon Steel Has Brinell Hardness Number (bhn) Of 180. What Are The Values Of Rc, Vhn And Ultimate Strength?

Description : A Plain Carbon Steel Has Brinell Hardness Number (bhn) Of 180. What Are The Values Of Rc, Vhn And Ultimate Strength?

Last Answer : Rc = BHN/10 = 18, VHN = BHN = 180 Ultimate strength = 3.48 × BHN MPa = 620 MPa.

What Are Orthotropic Materials?

Description : What Are Orthotropic Materials?

Last Answer : Orthotropic materials are a special class of isotropic materials which can be described by giving their properties in three perpendicular directions ex: wood; composites.

What Is The Difference Between The Isotropic And An Isotropic Materials?

Description : What Is The Difference Between The Isotropic And An Isotropic Materials?

Last Answer : If a material exhibits same mechanical properties regardless of loading direction, it is isotropic. ex:homogeneous cast materials. Materials lacking this property are anisotropic.

Strong and ductile materials (a) Polymers (b) Ceramics (c) Metals (d) Semiconductors

Description : Strong and ductile materials (a) Polymers (b) Ceramics (c) Metals (d) Semiconductors

Last Answer : (c) Metals

Not an example for actuator (a) Optical fiber (b) Shape memory alloys (c) Magneto-strictive materials (d) Electro-/Magneto-rheological fluids

Description : Not an example for actuator (a) Optical fiber (b) Shape memory alloys (c) Magneto-strictive materials (d) Electro-/Magneto-rheological fluids

Last Answer : (a) Optical fiber

Pick the composite from the list (a) Wood (b) Steel (c) Nylon (d) Mica

Description : Pick the composite from the list (a) Wood (b) Steel (c) Nylon (d) Mica

Last Answer : (a) Wood 

Figure out the odd statement about ceramics in the following (a) Good insulators of heat and electricity (b) Usually less desire than metals (c) Ductile in nature (d) Contains both metallic and nonmetallic elements

Description : Figure out the odd statement about ceramics in the following (a) Good insulators of heat and electricity (b) Usually less desire than metals (c) Ductile in nature (d) Contains both metallic and nonmetallic elements  

Last Answer : (c) Ductile in nature

Which one of the following is not basic component of Materials Science? (a) Cost (b) Properties (c) Structure (d) Performance

Description : Which one of the following is not basic component of Materials Science? (a) Cost (b) Properties (c) Structure (d) Performance

Last Answer : (a) Cost 

"Parma" is an important place in Madhya Pradesh. It is famous for – (1) Gold mines (2) Silver mines (3) Diamond mines (4) Iron mines

Description : "Parma" is an important place in Madhya Pradesh. It is famous for – (1) Gold mines (2) Silver mines (3) Diamond mines (4) Iron mines

Last Answer : (3) Diamond mines Explanation: Panna is famous for its diamond mines. A large group of diamond deposits extends North-East on a branch of the Vindhya Range for 240 km or so, and ... under the Diamond Mining Project of National Mineral Development Corporation (NMDC Ltd) of Government of India.

Stamp mills are generally used for crushing (A) Iron ores (B) Gold ores (C) Talc (D) Diamond

Description : Stamp mills are generally used for crushing (A) Iron ores (B) Gold ores (C) Talc (D) Diamond

Last Answer : (B) Gold ores

Which of the following oxides is not present in hematite iron ore? (A) Titanium oxide (B) Calcium oxide (C) Cobalt oxide (D) Manganese oxide

Description : Which of the following oxides is not present in hematite iron ore? (A) Titanium oxide (B) Calcium oxide (C) Cobalt oxide (D) Manganese oxide

Last Answer : (C) Cobalt oxide

In a plate type heat exchanger, heat transfer plates are never made of (A) Stainless steel (B) Cast iron (C) Titanium (D) Hastelloy C

Description : In a plate type heat exchanger, heat transfer plates are never made of (A) Stainless steel (B) Cast iron (C) Titanium (D) Hastelloy C

Last Answer : (B) Cast iron

The most abundant metal present in the earth's crust is; (A) Iron (B) Copper (C) Titanium (D) Aluminium

Description : The most abundant metal present in the earth's crust is; (A) Iron (B) Copper (C) Titanium (D) Aluminium

Last Answer : (D) Aluminium

The commonly used base for iron and steel work, is (A) Red lead (B) Zinc white (C) White lead (D) Titanium white

Description : The commonly used base for iron and steel work, is (A) Red lead (B) Zinc white (C) White lead (D) Titanium white

Last Answer : Answer: Option A

What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Description : What is used as a photocatalyst? a) Titanium dioxide b) Lead chromate c) Cobalt pigments d) Iron oxide

Last Answer : a) Titanium dioxide

Which pot of water will boil LAST when all are heated by the same source? w) aluminum pot x) iron pot y) brass pot z) titanium pot

Description : Which pot of water will boil LAST when all are heated by the same source? w) aluminum pot x) iron pot y) brass pot z) titanium pot

Last Answer : ANSWER: Z -- TITANIUM POT 

Which of the following is used as base material in Selective laser sintering (SLS)? a.Photopolymer b.Thermoplastics, Metal powders c.Titanium alloys d.Various materials

Description : Which of the following is used as base material in Selective laser sintering (SLS)? a.Photopolymer b.Thermoplastics, Metal powders c.Titanium alloys d.Various materials

Last Answer : b.Thermoplastics, Metal powders

Which of the following is used as base material in Electron Beam Melting (EBM) process? a.Titanium alloys b.Photopolymer c.Various materials d.Paper

Description : Which of the following is used as base material in Electron Beam Melting (EBM) process? a.Titanium alloys b.Photopolymer c.Various materials d.Paper

Last Answer : a.Titanium alloys

Which of the following is used as base material in Stereolithography (SLA) process? a.Thermoplastics , Metals powders b.Thermoplastics , Eutectic metals. c.Titanium alloys d.Photopolymer

Description : Which of the following is used as base material in Stereolithography (SLA) process? a.Thermoplastics , Metals powders b.Thermoplastics , Eutectic metals. c.Titanium alloys d.Photopolymer

Last Answer : d.Photopolymer