Hydrogen Cannot Be Removed Easily From Molten Steel. What Harm Hydrogen Has On Property Of Steel?

Hydrogen Cannot Be Removed Easily From Molten Steel. What Harm Hydrogen Has On Property Of Steel?
by

1 Answer

Answer :

Excessive hydrogen in molten steel results in the formation of small fissures often described as hairline cracks or flakes in the steel. Large forgings an alloy steel are particularly sensitive to this phenomenon.
by

Related questions

Hydrogen cannot be removed easily from molten steel. What harm hydrogen has on property of steel ?

Description : Hydrogen cannot be removed easily from molten steel. What harm hydrogen has on property of steel ?

Last Answer : Execessive hydrogen results in the formation of small fissures often described as hairline cracks or flakes in the steel. Large forgings in alloy steel are particularly sensitive to this phenom¬enon.

How Oxygen Gas Can Be Removed From Steel During Melting? What Are Fully Killed Steel?

Description : How Oxygen Gas Can Be Removed From Steel During Melting? What Are Fully Killed Steel?

Last Answer : Oxygen gas can be removed from steel during melting by adding elements such as manganese, silicon or aluminium which, because of their high affinity for oxygen, react with it to form non-metallic ... Steels in which have has most of their dissolved oxygen removed are called fully killed steels'.

Detrimental property of a material for shock load applications (a) High density (b) Low toughness (c) High strength (d) Low hardness

Description : Detrimental property of a material for shock load applications (a) High density (b) Low toughness (c) High strength (d) Low hardness  

Last Answer : (b) Low toughness

Which Element Is Added In Steel To Increase Resistance To Corrosion?

Description : Which Element Is Added In Steel To Increase Resistance To Corrosion?

Last Answer : Chromium.

Explain The Effects Of Alloying Chromium And Nickel In Stainless Steel.?

Description : Explain The Effects Of Alloying Chromium And Nickel In Stainless Steel.?

Last Answer : The addition of nickel and chromium increases the tensile strength and increase in resistance to corrosion takes place.

A Plain Carbon Steel Has Brinell Hardness Number (bhn) Of 180. What Are The Values Of Rc, Vhn And Ultimate Strength?

Description : A Plain Carbon Steel Has Brinell Hardness Number (bhn) Of 180. What Are The Values Of Rc, Vhn And Ultimate Strength?

Last Answer : Rc = BHN/10 = 18, VHN = BHN = 180 Ultimate strength = 3.48 × BHN MPa = 620 MPa.

Presently most used metal in the world (a) Aluminium (b) Gold (c) Steel (d) Silver

Description : Presently most used metal in the world (a) Aluminium (b) Gold (c) Steel (d) Silver

Last Answer : (c) Steel 

Pick the composite from the list (a) Wood (b) Steel (c) Nylon (d) Mica

Description : Pick the composite from the list (a) Wood (b) Steel (c) Nylon (d) Mica

Last Answer : (a) Wood 

When A Material Is Known As Allotropy Or Polytropic?

Description : When A Material Is Known As Allotropy Or Polytropic?

Last Answer : A material is known as allotropic aur polytropic if it exists in several forms at a different temperature.

What Is Allot Rope? In What Forms Of Cubic Pattern, Iron Exists?

Description : What Is Allot Rope? In What Forms Of Cubic Pattern, Iron Exists?

Last Answer : Some elements exist in more than one crystalline form. Each crystalline form is known as ‘allotrope’ of the element. Iron exists in two crystalline forms of cubic pattern, namely, bodycentered cubic (BCC) and face-centered cubic (FCC).

For Which Parts The Wahl Factor And Lewis Factor Is Used?

Description : For Which Parts The Wahl Factor And Lewis Factor Is Used?

Last Answer : Wahl factor and Lewis factor is used for springs and gears respectively.

Give One Example Each Of The Following Proportion Of Materials – Dimensional, Physical, Technological And Mechanical?

Description : Give One Example Each Of The Following Proportion Of Materials – Dimensional, Physical, Technological And Mechanical?

Last Answer : Roughness, enthalpy, toughness and hardness respectively.

Explain The Difference Between Pear Lite And Cementite?

Description : Explain The Difference Between Pear Lite And Cementite?

Last Answer : Pearlite is a eutectoid mixture of ferrite and cementite. Cementide is a chemical compound of iron and carbon.

What Is The Name Of Solid Solution Of Carbon In Alpha-iron And Delta Iron?

Description : What Is The Name Of Solid Solution Of Carbon In Alpha-iron And Delta Iron?

Last Answer : Ferrite and Austenite respectively.

Give One Example Of Metal Classified As Per Structure As Bcc, Fcc, Hcp And Ccp?

Description : Give One Example Of Metal Classified As Per Structure As Bcc, Fcc, Hcp And Ccp?

Last Answer : Examples of BCC, FCC, HCP and CCP structures: BCC (Body Centred Cubic) structure – molybdenum; FCC (Face Centred Cubic) structure – Aluminum; HCP (Hexagonal Close Packed) structure – Zinc; CCP (Cubic Close Packing) structure – Copper.

Define Ceramic?

Description : Define Ceramic?

Last Answer : Ceramic is a solid formed by the combination of metallic and non-metallic elements.

What Does The Alloy Designation Fg 250 Indicate?

Description : What Does The Alloy Designation Fg 250 Indicate?

Last Answer : FG 250 alloy designation indicates Grey cast iron with a tensile strength of 250 MPa.

What Is The Common Element Between The Brass And Bronze Metal Alloys?

Description : What Is The Common Element Between The Brass And Bronze Metal Alloys?

Last Answer : Copper.

Which Theories Of Failure Are Used For? (a) Ductile Materials (b) Brittle Materials?

Description : Which Theories Of Failure Are Used For? (a) Ductile Materials (b) Brittle Materials?

Last Answer : For ductile materials, theories of failure used are maximum shear stress theory and maximum energy of distortion theory; For brittle materials, the theory of maximum principal stress and maximum strain are used.

List At Least Two Factors That Promote The Transition From Ductile To Brittle Fracture?

Description : List At Least Two Factors That Promote The Transition From Ductile To Brittle Fracture?

Last Answer : The manner of loading and the rate of loading promote the transition from ductile to brittle fracture. A machine member may have ductile failure under static loading but may fail in brittle fashion when the ... testing speed, but if the load is applied at a high velocity then failure may be brittle.

While Normal Carburizing And Nit Riding Surface Treatments Increase Fatigue Strength, Excessive Treatment May Decrease The Fatigue Strength. Why?

Description : While Normal Carburizing And Nit Riding Surface Treatments Increase Fatigue Strength, Excessive Treatment May Decrease The Fatigue Strength. Why?

Last Answer : Normal carburizes/nits riding treatments increases volume due to phase transformation at the surface and introduce residual compressive surface stress and thus increases fatigue strength. By excessive treatment, the ... in the regions of the high tensile stress and lead o early fatigue failure.

Distinguish Between Creep And Fatigue?

Description : Distinguish Between Creep And Fatigue?

Last Answer : Creep is low and progressive deformation of a material with time under a constant stress at high-temperature applications. Fatigue is the reduced tendency of material to offer resistance to applied stress under repeated or fluctuating loading condition.

Why Fatigue Strength Decreases As Size Of A Part Increases Beyond Around 10mm?

Description : Why Fatigue Strength Decreases As Size Of A Part Increases Beyond Around 10mm?

Last Answer : The perfection of material conditions is possible at lower sizes, and as size increases, it is not possible to attain a uniform structure of the material.

Why Is It That The Maximum Value Which The Residual Stress Can Reach Is The Elastic Limit Of The Material?

Description : Why Is It That The Maximum Value Which The Residual Stress Can Reach Is The Elastic Limit Of The Material?

Last Answer : A stress more than the elastic limit, with no external force to oppose it, we relieve itself by plastic deformation until it reaches the value of the yield stress.

Whether Individual Components In Composite Materials Retain Their Characteristics Or Not?

Description : Whether Individual Components In Composite Materials Retain Their Characteristics Or Not?

Last Answer : Yes.

What Is The Percentage Of Carbon In Cast Iron?

Description : What Is The Percentage Of Carbon In Cast Iron?

Last Answer : 2.5%.

Specific Strength Of Materials Is Very High When They Are In Fibre Size But Lower When They Are In Bar Form - Why?

Description : Specific Strength Of Materials Is Very High When They Are In Fibre Size But Lower When They Are In Bar Form - Why?

Last Answer : The crystal structure has ordered, repeating arrangement of atoms. Fibers are liable to maintain this and thus have high specific strength. As for size increases, the condition of ordered and ... because of several types of defects and dislocations, and thus the specific strength gets lower.

What Is Curie Point?

Description : What Is Curie Point?

Last Answer : Curie point is the temperature at which ferromagnetic materials can no longer be magnetized by outside forces.

What Are The Principal Constituents Of Brass?

Description : What Are The Principal Constituents Of Brass?

Last Answer : Principal constituents of brass are copper and zinc.

Mention Two Types Of Dislocations?

Description : Mention Two Types Of Dislocations?

Last Answer : Dislocation refers to a break in the continuity of the lattice. In an edge dislocation, one plane of atoms gets squeezed out. In screw dislocation, the lattice atoms move from their regular ideal positions.

What Properties Are Needed To Be Considered For Application Calling For Following Requirements? I) Rigidity. Ii) Strength Of No Plastic Deformation Under Static Load. Iii) Strength To Withstand Overload Without Fracture.

Description : What Properties Are Needed To Be Considered For Application Calling For Following Requirements? I) Rigidity. Ii) Strength Of No Plastic Deformation Under Static Load. Iii) Strength To Withstand Overload Without Fracture.

Last Answer : i) Reliability – elastic modulus and yield strength. ii) Strength (for no plastic deformation under static loading) – yield point. iii) Strength (overload) – Toughness and impact resistance. iv) Wear resistance – Hardness. v) Reliability and safety – Endurance limit and yield.

What Are Orthotropic Materials?

Description : What Are Orthotropic Materials?

Last Answer : Orthotropic materials are a special class of isotropic materials which can be described by giving their properties in three perpendicular directions ex: wood; composites.

What Is The Difference Between The Isotropic And An Isotropic Materials?

Description : What Is The Difference Between The Isotropic And An Isotropic Materials?

Last Answer : If a material exhibits same mechanical properties regardless of loading direction, it is isotropic. ex:homogeneous cast materials. Materials lacking this property are anisotropic.

Democratic material (a) Diamond (b) Titanium (c) Iron (d) Gold

Description : Democratic material (a) Diamond (b) Titanium (c) Iron (d) Gold 

Last Answer : (c) Iron

Strong and ductile materials (a) Polymers (b) Ceramics (c) Metals (d) Semiconductors

Description : Strong and ductile materials (a) Polymers (b) Ceramics (c) Metals (d) Semiconductors

Last Answer : (c) Metals

Not an example for actuator (a) Optical fiber (b) Shape memory alloys (c) Magneto-strictive materials (d) Electro-/Magneto-rheological fluids

Description : Not an example for actuator (a) Optical fiber (b) Shape memory alloys (c) Magneto-strictive materials (d) Electro-/Magneto-rheological fluids

Last Answer : (a) Optical fiber

Figure out the odd statement about ceramics in the following (a) Good insulators of heat and electricity (b) Usually less desire than metals (c) Ductile in nature (d) Contains both metallic and nonmetallic elements

Description : Figure out the odd statement about ceramics in the following (a) Good insulators of heat and electricity (b) Usually less desire than metals (c) Ductile in nature (d) Contains both metallic and nonmetallic elements  

Last Answer : (c) Ductile in nature

Which one of the following is not basic component of Materials Science? (a) Cost (b) Properties (c) Structure (d) Performance

Description : Which one of the following is not basic component of Materials Science? (a) Cost (b) Properties (c) Structure (d) Performance

Last Answer : (a) Cost 

First metal known to be used by man (a) Iron (b) Bronze (c) Silver (d) Aluminium

Description : First metal known to be used by man (a) Iron (b) Bronze (c) Silver (d) Aluminium 

Last Answer : (b) Bronze

First material known to be used by man (a) Cotton (b) Bronze (c) Iron (d) Rock

Description : First material known to be used by man (a) Cotton (b) Bronze (c) Iron (d) Rock 

Last Answer : (d) Rock 

Will it harm the new plant if the seed portion of a sprouted avacado seed is removed ?

Description : Will it harm the new plant if the seed portion of a sprouted avacado seed is removed ?

Last Answer : I don't think you can remove the seed/pit without harming the plant (and why would you want to remove the pit?). Here's how I've grown avocado plants in the past: Take the avocado pit ... produce fruit, but it will take many years before an avocado sprout will turn into a fruit-bearing tree.

Only one color, but not one size, Stuck at the bottom, yet easily flies. Present in sun, but not in rain, Doing no harm, and feeling no pain. What is it? -Riddles

Description : Only one color, but not one size, Stuck at the bottom, yet easily flies. Present in sun, but not in rain, Doing no harm, and feeling no pain. What is it? -Riddles

Last Answer : It's a shadow!

Only one color, but not one size, Stuck at the bottom, yet easily flies. Present in sun, but not in rain, Doing no harm, and feeling no pain.What is it? -Riddles

Description : Only one color, but not one size, Stuck at the bottom, yet easily flies. Present in sun, but not in rain, Doing no harm, and feeling no pain.What is it? -Riddles

Last Answer : It is a shadow!

Only one color, but not one size, stuck at the bottom, yet easily flies; present in sun, but not in rain; doing no harm, and feeling no pain. -Riddles

Description : Only one color, but not one size, stuck at the bottom, yet easily flies; present in sun, but not in rain; doing no harm, and feeling no pain. -Riddles

Last Answer : A shadow.

The electrolysis of molten sodium hydride librates hydrogen gas at the ------------- .

Description : The electrolysis of molten sodium hydride librates hydrogen gas at the ------------- .

Last Answer : Ans. Anode

If the planes that struck the twin towers one hundred floors up are the reason they collapsed, why was there 3000F molten steel in the sub basements four weeks later?

Description : If the planes that struck the twin towers one hundred floors up are the reason they collapsed, why was there 3000F molten steel in the sub basements four weeks later?

Last Answer : I think you answered your own question

Is Steel rod Be heated into a molten metal is example of a phase change?

Description : Is Steel rod Be heated into a molten metal is example of a phase change?

Last Answer : Feel Free to Answer

Molten phthalic anhydride is stored in a/an __________ vessel. (A) Aluminium (B) Nickel clad steel (C) Lead lined steel (D) Glass lined steel

Description : Molten phthalic anhydride is stored in a/an __________ vessel. (A) Aluminium (B) Nickel clad steel (C) Lead lined steel (D) Glass lined steel

Last Answer : (A) Aluminium

The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option B

Whitworth compressed steel is obtained when molten steel is subjected to a pressure of (A) 5 kg/mm2 (B) 9 kg/mm2 (C) 13 kg/mm2 (D) 15 kg/mm

Description : Whitworth compressed steel is obtained when molten steel is subjected to a pressure of (A) 5 kg/mm2 (B) 9 kg/mm2 (C) 13 kg/mm2 (D) 15 kg/mm

Last Answer : Answer: Option B