Write about need advantages and of limitation in Hybrid vehicles.

Write about need advantages and of limitation in Hybrid vehicles.
by

1 Answer

Answer :

Need of Hybrid Vehicle

1. To increase fuel efficiency.

2. To reduce gaseous emission.

3. To increase acceleration capability.

4. To reduce noise emission.

5. To reduce fuel consumption

Advantages

1. Environment friendly.

2. Financial benefits.

3. Less dependent on fissile fuels.

4. Regenerative braking system.

5. Built from light materials.

Limitations.

1. Less power.

2. Can be expensive.

3. Poorer handling.

4. Higher maintenance cost.
by

Related questions

Explain the need of hybrid vehicles.

Description : Explain the need of hybrid vehicles.

Last Answer : Need of Hybrid Vehicle : 1) To increase fuel efficiency. 2) To reduce gaseous emission. 3) To increase acceleration capability. 4) To reduce noise emission. 5) To provide alternate solution for fossil fuels 6) To comply the stringent Emission Norms Hybrid Vehicles are needed.

Discuss the advantages and limitations of electric Vehicles.

Description : Discuss the advantages and limitations of electric Vehicles.

Last Answer : Advantages:  1. Rapid acceleration 2. Noise free operation 3. No exhaust fumes 4. High reliability 5. Easy maintenance 6. Regenerating braking 7. No loss power in idling. 8. Easy to drive ... vehicles 4. Life of batteries quite short 5. Limited power 6. The top speed is quite low. 

Explain the working of series hybrid vehicle.

Description : Explain the working of series hybrid vehicle.

Last Answer : Series-Hybrid vehicle In Series Hybrid vehicles, the Internal Combustion Engine (ICE) drives a generator, which charges the battery and supplies current to the electronically controlled motor. The electric motor ... have to be rated to the maximum power. It has low overall system efficiency.

What is hybrid vehicle? Explain working with the help of layout of a series hybrid vehicle.

Description : What is hybrid vehicle? Explain working with the help of layout of a series hybrid vehicle. 

Last Answer : Hybrid Vehicle: A hybrid vehicle is one that uses two different methods to propel the vehicle. A hybrid electric vehicle, abbreviated HEV uses both an internal combustion engine and an electric motor to propel ... have to be rated to the maximum power. It has low overall system efficiency.

List any four advantages of CRDI system and write its operation.

Description : List any four advantages of CRDI system and write its operation.

Last Answer : Advantages of CRDI System: 1. Deliver 25% more power and torque than the normal direct injection engine. 2. Lower levels of noise and vibration. 3. Lower emissions. 4. Lower ... activating solenoid valve, whereas the injection rate can be modified by controlling the nozzle needle movement. 

What are the advantages of V.V.T?

Description : What are the advantages of V.V.T?

Last Answer : Advantages of V.V.T (Variable Valve Timing) 1) It improves performance of an engine. 2) It increases engine flexibility under different conditions. 3) It improves fuel economy. 4) It makes precise handling of engine valve. 5) It lowers the exhaust emission. 6) It increases torque.

What does VTEC stands for? State advantages of it.

Description : What does VTEC stands for? State advantages of it.

Last Answer : VTEC stands for Variable valve timing and electronic lift control. In VTEC, the valve timing and the valve lift is controlled using ECU to provide efficient breathing of engine and efficient performance of ... GDI is capable of using very lean mixture i.e. 65:1 while using VTEC Improve drivability

Explain VVT mechanism and state any two advantages of it.

Description : Explain VVT mechanism and state any two advantages of it.

Last Answer : Variable valve timing (VVT) is a system for varying the valve opening of an internal combustion engine. This allows the engine to deliver high power, but also to work tractably and efficiently at low power ... handling of engine valve. 5) It lowers the exhaust emission. 6) It increases torque. 

What is GDI? State its advantages.

Description : What is GDI? State its advantages. 

Last Answer : Gasoline Direct Injection (GDI), also known as Petrol Direct Injection. This system is employed in modern two-stroke and four-stroke gasoline engines. The gasoline is highly pressurized, and injected via a ... . 5. Spark Knock is much more controlled. 6. Leaner fuel mixtures during operation. 

State FOUR advantages if MPFI engine.

Description : State FOUR advantages if MPFI engine.

Last Answer : Advantages if MPFI engine. 1) MPFI improved fuel consumption. 2) Better Drivability. 3) ECM technique is used to control the engine. 4) Precise supply of air-fuel mixture 5) Engine ... -fuel mixture. 9) Cleaner emissions 10) MPFI improves functionality and durability of the engine components.

Give advantages and disadvantages of LPG as a fuel for automobile engines.

Description : Give advantages and disadvantages of LPG as a fuel for automobile engines.

Last Answer : Advantages of LPG 1. It is cheaper than petrol 2. It is highly detonation resistant and does not pre-ignite easily. 3. It gives better manifold distribution and mixes easily with air. 4. Residue ... 13. It is safe only if proper periodic maintenance of the gas system is done by trained person. 

State the advantages of DTSI.

Description : State the advantages of DTSI.

Last Answer : Advantages of DTSI system 1. Less vibrations and noise. 2. Long life of the engine parts such as piston rings and valve stem. 3. Decrease in the specific fuel consumption. ... winter season & cold climatic conditions or at very low temperatures because of increased compression ratio.

State four advantages of CRDI system.

Description :  State four advantages of CRDI system. 

Last Answer : Advantages of CRDI System:  1. Deliver 25% more power and torque than the normal direct injection engine. 2. Lower levels of noise and vibration. 3. Lower emissions. 4. Lower fuel consumption. 5. ... at low engine speeds and loads. 7) In CRDI system, Fuel pump operates with low drive torque. 

State four advantages of I head combustion chamber.

Description : State four advantages of I head combustion chamber. 

Last Answer : Advantages of I-Head combustion chamber: 1. Lower pumping losses and higher volumetric efficiency. 2. Lesser distance of flame travel therefore low octane requirement. 3. More uniform cooling of cylinder ... ratio and therefore less heat loss. 5. Easier to cast and hence lower casting cost.

List the various fuels used in I.C. engines. Write the properties of Biodiesel Fuels used in I. C. engine.

Description : List the various fuels used in I.C. engines. Write the properties of Biodiesel Fuels used in I. C. engine.

Last Answer : 1 Petrol 2. Diesel 3. LPG 4. CNG 5.Hydrogen 6.Alcohol 7.Bio diesel Properties biodiesel  i) It is a renewable substitute fuel for petroleum diesel. ii) It has lower exhaust ... diesel vi) It is an environmentally friendly fuel that an be used in any diesel engine without modification.

Write the functions of actuators

Description : Write the functions of actuators

Last Answer : 1. An actuator is a component of an engine that is responsible for moving or controlling parts of an engine. 2. An actuator requires a control signal and a source of energy. The control ... movement by converting one kind of motion, such as rotary motion, into another kind, such as linear motion

Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Description : Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Last Answer : The stages of combustion in S.I. engine: Stage I: Ignition Lag or Preparation Phase: It is a chemical process which depends on-nature of fuel, temperature & pressure, ... The rate of combustion reduces due to surface of the flame front becoming smaller and reduction in turbulence.

Write the function of high pressure accumulator.

Description : Write the function of high pressure accumulator.

Last Answer : High pressure accumulator: The function of high pressure accumulator is to 1.Accumulate fuel supplied by the high pressure fuel pump  2. Supply fuel through the high pressure lines to the ... 4. To allow excess fuel to pass through fuel regulator when pressure increases above specified value.

Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Description : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Last Answer : Write the values of boiling temperature for cetane(diesel).iso-octane(petrol), Butane, Propane an methane fuel and write effect of it on its system.

Write the properties of diesel as a fuel in CI engine.

Description : Write the properties of diesel as a fuel in CI engine.

Last Answer : 1) Volatility: - The fuel should be sufficiently volatile in the operating range of temperature to produce good mixing and combustion. 2) Viscosity: Viscosity of a fuel is a measure of its resistance to flow. ... the temperature of unit mass of a diesel through 1°c. It is about 1.9 KJ/Kg°c.

Write neat sketch, describe MPFI system.

Description : Write neat sketch, describe MPFI system.

Last Answer : MPFI system In the port injection arrangement, the injectoe is placed on the side of the intake manifold near the intake port. The injector sprays gasoline into the air, inside the intake manifold. The ... manifold. If there are six cylinders, there will be six injectors as shown in figure.

Write advantage of VGT over conventional turbocharger.

Description : Write advantage of VGT over conventional turbocharger.

Last Answer : Advantages: 1. VGT is very effective for improving combustion efficiency. 2. Exhaust smoke decreases and BSFC is improved by about 3 to 10 percent at low engine speed region of 1000 to ... engine emissions. 6. Power output of VGT is higher even at lower speed than conventional turbocharger.

Describe DTSI system. Write two advantage of it.

Description : Describe DTSI system. Write two advantage of it. 

Last Answer : DTSI technology provides a combination of the light weight and twice the power offered by two-stroke engines with a significant power boost, i.e. a considerably high "power-to ... winter season & cold climatic conditions or at very  low temperatures because of increased Compression ratio

Write function of canister purge control and idle speed control in S.I. engine.

Description : Write function of canister purge control and idle speed control in S.I. engine.

Last Answer : Function of canister purge control - 1. The purge valve is the part of the vehicle Evaporative Emission Control (EVAP) system. 2. The EVAP system prevents fuel vapors in the fuel tank from escaping ... control is used to prevent engine stall during idle and to allow the engine to run at low RPM.

State four drawbacks of carbureted SI engine

Description : State four drawbacks of carbureted SI engine 

Last Answer : Drawbacks of carbureted SI engine: 1) No altitude compensation. 2) Mal-distribution of charge. 3) Variation in air: fuel ratio. 4) Inaccurate metering of charge. 5) Does not meet emission ... in poor efficiency. 10) Backfiring may take place. 11) Carburetor Icing may take place.

Explain Evaporative emission control system.

Description : Explain Evaporative emission control system.

Last Answer : EVAP system Operation: When the engine is running, stored fuel vapours in fuel tank are purged from the canister whenever the throttle has opened past the purge port and coolant temperature is above 54 °C. ... The EVAP system is designed to limit maximum vacuum and pressure in the fuel tank.   

Explain Delay Period in detail.

Description : Explain Delay Period in detail.

Last Answer : Delay period: Ignition delay period is the time period between start of injection and start of combustion, has a great influence on the correct optimization of a diesel engine. The knock phenomenon ... with air, and mixture rose in temperature. Pre-flame reactions occur during chemical delay  

Sketch and Explain F-head combustion chamber.

Description : Sketch and Explain F-head combustion chamber.

Last Answer : In F-head combustion chamber one valve is in head and other in the block. This design is a compromise between L-head and I head combustion chambers. Advantages are : High volumetric ... This design is the complex mechanism for operation of valves and expensive special shaped piston. 

Explain working of LPG kit with labeled block diagram.

Description : Explain working of LPG kit with labeled block diagram.

Last Answer : Working of LPG Kit: LPG Tank: It is used to store the LPG at 10 bar Filler Valve: It allows the LPG into the tank while feeling. Pressure Relief Valve: It is used to limit ... regulator Mixer / gas injection which flows the LPG into the combustion chamber  Block diagram:  

Explain engine design modification parameter to control emissions.

Description : Explain engine design modification parameter to control emissions.

Last Answer : Methods used for improving the exhaust emission under the engine design modification are 1. Use of leaner air-fuel ratios: The carburetor may be modified to provide relatively lean air fuel ... tolerances and using special type of carburetors. This also includes fuel injection in manifold.  

Explain the working computer controlled EGR system.

Description : Explain the working computer controlled EGR system.

Last Answer : Exhaust Gas recirculation: EGR System is control by the ECM. A pressure sensor monitors the exhaust system pressure. The sensor signals this information of pressure to the ECM. The ECM sends the signal ... open and close the EGR valve. Thus it controls the amount of exhaust gas recalculated.

Explain the methods of fuel injection used EFI system.

Description : Explain the methods of fuel injection used EFI system.

Last Answer : Methods of fuel injection: 1. Sequential fuel injection. (SFI) 2. Grouped fuel injection. 3. Simultaneous fuel injection. 4. Continuous injection. 1. Simultaneous Injection: Injection of fuel ... of the fuel injection is determined by ECU depending upon load and speed. 

State the effect of compression ratio and turbulence on ignition lag.

Description : State the effect of compression ratio and turbulence on ignition lag.

Last Answer : Effect of engine variables on ignition lag  1) Compression ratio: A higher compression ratio increases the pressure and temperature of the working mixture and decreases the concentration of the residual gases. ... . For this reason. It becomes necessary to advance the spark timing at higher speed. 

What is diesel smoke? State two methods to control diesel smoke.

Description : What is diesel smoke? State two methods to control diesel smoke.

Last Answer : Diesel smoke: Smoke is defined as visible products of combustion, is due to poor combustion. It originates early in the combustion. Rich fuel-air mixture & at pressures developed in diesel ... manifold. This shortens the delay period- curbs thermal cracking which is responsible for soot format

Compare throttle body injection with port fuel injection systems.

Description : Compare throttle body injection with port fuel injection systems.

Last Answer : Sr. No. TBI system PFI System 1 Fuel is injected into the center of the throttle body. Fuel is injected into the port 2 TBI uses bottom feed ... the throttle body. Hither power output due to low resistance at intake manifold and higher volumetric efficiency.

Explain the pollutants from gasoline engine

Description : Explain the pollutants from gasoline engine

Last Answer : 1. Hydrocarbon (HC):-They play an important role in forming NO2 and O3 which are health and environmental hazard.  2. Carbon Monoxide (CO): CO is a highly poisonous gas that can cause dizziness, ... effect, NO2 is a very toxic gas and contributes to the formation of smog, ozone, and acid rain.

Explain the following properties i) Pour point ii) Viscosity iii) Ignition quality iv) Fire point

Description : Explain the following properties i) Pour point ii) Viscosity iii) Ignition quality iv) Fire point

Last Answer : i. Pour point: Pour point is the temperature below which the entire mass of fuel, solid or liquid together, freeze and thus cause flow of fuel impossible. Pour point is usually 5 to 10 °C below ... is the temperature at which the flash will sustain itself as a steady flame for at least five seconds.

With neat labeled figure, explain the working of any two position of PCV (positive crank case ventilation) valve.

Description : With neat labeled figure, explain the working of any two position of PCV (positive crank case ventilation) valve.

Last Answer : PCV Valve: It consists of a spring loaded tapered valve for flow control. The crankcase pressure and manifold vacuum act together to close the valve where as the spring pressure tends to keep it open.(Fig a ... back seat sealing the inlet and crankcase is protected from the back fire.(Fig d).

Define detonation and surface ignition

Description : Define detonation and surface ignition

Last Answer : 1) Detonation  Detonation is auto-ignition of last part of homogeneous charge occurring near the end of combustion, before the flame front reaches it. In auto- ignition, the burning is almost ... spark plug or glowing combustion chamber i.e. any means other than the normal spark discharge.

List and Explain two type of diesel smoke. Explain four cause of diesel smoke.

Description : List and Explain two type of diesel smoke. Explain four cause of diesel smoke.

Last Answer : Answer: Two type of diesel smoke 1) Blue-white smoke 2) Black smoke Four cause of diesel smoke:- 1) Blue smoke is due to burning the droplets of lubricating oil in combustion ... because of worn piston rings & cylinder liners & water come in combustion chamber because cracked water jacket.

List three sources of pollutant from gasoline engine. Explain evaporative losses in detail.

Description : List three sources of pollutant from gasoline engine. Explain evaporative losses in detail.

Last Answer : Answer: Three sources of pollutant from gasoline engine:- 1) Carburettor losses 2) Crankcase blow-by 3) Engine exhaust emission Evaporative losses:-  1. Carburettor losses: occur due ... due to incomplete combustion, the exhaust gas also contains carbon monoxide, unburnt hydrocarbons (UBHC).

State four methods to improve fuel economy of a vehicle.

Description : State four methods to improve fuel economy of a vehicle.

Last Answer : Answer: Methods of improving fuel economy.  1) Use of multi-functional fuel additives will provide 3 to 4% fuel economy. 2) Good driving habits. 3) Properly maintained fuel supply ... computer controlled ignition system. 6) Use of higher voltage automotive electrical system (42 volts system).

How VGT is beneficial over conventional Turbocharger?

Description : How VGT is beneficial over conventional Turbocharger?

Last Answer : Answer: VGT is beneficial over conventional Turbocharger due to following reasons:- 1) Reduce Turbo Lag 2) Quick Responsive engine 3) Improved fuel efficiency by 20% 4) Accurate boost speed at low ... excessive. So waste gate boost control is not needed. 6) Higher power output at lower speed 

Explain working of Variable Valve Timing and Electronic lift control (VTEC) system. Enlist its advantage and Drawbacks

Description : Explain working of Variable Valve Timing and Electronic lift control (VTEC) system. Enlist its advantage and Drawbacks

Last Answer : Answer: Working of Variable Valve Timing and Electronic lift control (VTEC) system:- VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system ... 2) Maintenance cost is high 3) Very complex structure required complicated control system.

List eight ways of reducing pollution. Explain PCV and evaporative emission system with suitable sketch.

Description : List eight ways of reducing pollution. Explain PCV and evaporative emission system with suitable sketch.

Last Answer : Eight ways of reducing pollution:-  1) Optimize Ignition Advance 2) Use unleaded gasoline & Low sulphur diesel 3) Use leaner air fuel ratio 4) Use exhaust gas treatment devices ex Catalytic ... check valve. The EVAP system is designed to limit maximum vacuum and pressure in the fuel tank.

Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size

Description : Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size 

Last Answer : Comparison between detonation and diesel knock: Parameter To avoid Detonation in SI Engine  To avoid Diesel knock i) Fuel Ignition Temperature High Low ii) Compression Ratio ... Cylinder wall temperature Low High viii) Cylinder size Small Large

Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Description : Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Last Answer : Working of CNG Kit: The Sequential Injection system still has a high pressure tank, filler, filter and regulator, the regulator is different in that it puts out a steady pressure as opposed ... , natural gas temperature sensor and coolant temperature sensor to operate and control the system.  

With the help of neat sketch, describe block diagram of Electronic Diesel Control Unit (EDC).

Description : With the help of neat sketch, describe block diagram of Electronic Diesel Control Unit (EDC).

Last Answer : EDC: The ECU determines the correct quantity of the fuel to be injected based on the inputs and the data in the look up table. The fuel input depends on the rack position and thus ECU ... ECU can also protect the engine against overheating by regulating the maximum quantity of fuel delivered.

Enlist drawbacks of carbureted (SI) Engine on the basis of emission fuel Consumption, Air fuel ratio and fuel distribution.

Description : Enlist drawbacks of carbureted (SI) Engine on the basis of emission fuel Consumption, Air fuel ratio and fuel distribution.

Last Answer : Drawbacks of carbureted (SI) Engine. Parameter Drawbacks Emission Does not meet emission Norms Fuel consumption Due to absence of throttling specific fuel consumption is ... distribution of charge. Fuel distribution for each cylinder is not equal for multi cylinder engine.

CNG is used as alternative fuel, justify with four merits and four demerits.

Description : CNG is used as alternative fuel, justify with four merits and four demerits.

Last Answer : 1. CNG reduces the harmful emission 2. Operating cost of the vehicle running on CNG is lower. 3. Reduced vehicle maintenance. 4. Fuel theft is not possible. Since NG cannot be siphoned ... 5. Inconsistent fuel properties. So above merits and demerits suggest that CNG is used as alternative fuel.