Explain working of LPG kit with labeled block diagram.

Explain working of LPG kit with labeled block diagram.
by

1 Answer

Answer :

Working of LPG Kit:

LPG Tank: It is used to store the LPG at 10 bar

Filler Valve: It allows the LPG into the tank while feeling.

Pressure Relief Valve: It is used to limit pressure built up inside the tank.

Fuel Selector Switch: This switch used to select the type of fuel (LPG/Petrol)

Electronic Control Unit (ECU): It controls accurate rate of fuel delivery at right time at right cylinder.

Pressure Regulator (Vaporizer): It reduces the pressure from 10 bar to injection pressure 1.35 bar.

Gas Distributor: It supplies the gas at atmospheric pressure as per the engine requirement.

LPG Injector: It open & close based on the ECU signal & injects the gas accordingly.

LPG Kit Block Diagram:
image
OR
Working of LPG Kit:
The LPG kit contains a duel fuel conversion system which comes with the following components –
1. Tank, which contains the highly pressurized LPG in liquid form, comes in capacities of 30 to 100 liters.
2. The multivalve which controls and checks the filling of the tank comes with a 80% stop-fill safety feature. That’s means the valve closes not allowing further filling when 80% of the tank is filled.
3. A device which automatically shuts of the tank and the fuel supply in the event of a ruptured line.
4.LPG solenoid valve
5.Gasoline solenoid valve
6.Electronic control module which controls of the flow of LPG in fuel injection systems
7.LPG / Petrol switch, which enables the driver to choose which fuel he wishes to use
8.Pressure regulator Mixer / gas injection which flows the LPG into the combustion chamber 

Block diagram:
 image
by

Related questions

Draw a labeled block of LPG conversion kit. Describe its working.

Description : Draw a labeled block of LPG conversion kit. Describe its working.

Last Answer : Working of CNG Kit: The Sequential Injection system still has a high pressure tank, filler, filter and regulator, the regulator is different in that it puts out a steady pressure as opposed ... , natural gas temperature sensor and coolant temperature sensor to operate and control the system.

Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Description : Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Last Answer : Working of CNG Kit: The Sequential Injection system still has a high pressure tank, filler, filter and regulator, the regulator is different in that it puts out a steady pressure as opposed ... , natural gas temperature sensor and coolant temperature sensor to operate and control the system.  

With neat labeled figure, explain the working of any two position of PCV (positive crank case ventilation) valve.

Description : With neat labeled figure, explain the working of any two position of PCV (positive crank case ventilation) valve.

Last Answer : PCV Valve: It consists of a spring loaded tapered valve for flow control. The crankcase pressure and manifold vacuum act together to close the valve where as the spring pressure tends to keep it open.(Fig a ... back seat sealing the inlet and crankcase is protected from the back fire.(Fig d).

Draw a block diagram of CRDI system and describe its working.

Description : Draw a block diagram of CRDI system and describe its working.

Last Answer : Working of CRDI system: High pressure pump provides high pressure fuel to the common rail. The common rail stores the fuel and maintains a constant pressure in the common rail line (approximately 1500 bars.). ... rate can be modified by controlling the nozzle needle movement. OR

What is EGR? Explain with the help of block diagram.

Description : What is EGR? Explain with the help of block diagram.

Last Answer : Exhaust Gas Recirculation Valve (Operation-2 marks, Sketch-2 marks) When the engine is idling, the EGR valve is closed and there is no EGR flow into the manifold. The EGR valve remains closed until the ... exhaust gas (less than 10% of total) to be supplied into the incoming air: fuel mixture

With the help of neat sketch, describe block diagram of Electronic Diesel Control Unit (EDC).

Description : With the help of neat sketch, describe block diagram of Electronic Diesel Control Unit (EDC).

Last Answer : EDC: The ECU determines the correct quantity of the fuel to be injected based on the inputs and the data in the look up table. The fuel input depends on the rack position and thus ECU ... ECU can also protect the engine against overheating by regulating the maximum quantity of fuel delivered.

Draw block diagram for EDC type fuel pump in diesel engine.

Description : Draw block diagram for EDC type fuel pump in diesel engine.

Last Answer : Block diagram for EDC type fuel pump in diesel engine OR

Draw a labelled block diagram of CRDI system

Description : Draw a labelled block diagram of CRDI system

Last Answer : block diagram of CRDI system

Compare the following fuels on the basis of calorific value and knocking. LPG, CNG and bio-diesel

Description : Compare the following fuels on the basis of calorific value and knocking. LPG, CNG and bio-diesel 

Last Answer : Parameter LPG CNG Bio-diesel Calorific value 46.4MJ/Kg LPG has consistent & higher calorific value.  52.34 MJ/Kg Which is higher than LPG. 37.27 MJ/Kg this ... 65 which is higher than petro-diesel. So intensity of knocking is less in biodiesel compared to petro diesel.

Give advantages and disadvantages of LPG as a fuel for automobile engines.

Description : Give advantages and disadvantages of LPG as a fuel for automobile engines.

Last Answer : Advantages of LPG 1. It is cheaper than petrol 2. It is highly detonation resistant and does not pre-ignite easily. 3. It gives better manifold distribution and mixes easily with air. 4. Residue ... 13. It is safe only if proper periodic maintenance of the gas system is done by trained person. 

LPG is used as an alternative fuel for SI engine. Justify your answer

Description : LPG is used as an alternative fuel for SI engine. Justify your answer

Last Answer : LPG is used as an alternative fuel for SI engine because of following advantages. 1. The exceptional advantages of LPG as an alternative engine fuel have been mainly from the simplicity of its ... plug is increased. 9. Fuel supply system can be easily modified by introducing a conversion kit.

Draw the circuit diagram of glow plug and explain its operation.

Description : Draw the circuit diagram of glow plug and explain its operation.

Last Answer : Answer: Operation of glow plug: Glow plug is an aid for cold starting of a C.I. engine. The selfignition temperature of diesel is 250°C. For compression ignition, the charge (air + diesel) ... is automatically interrupted. But starting may be attempted again as soon as the driver wishes. 

Explain the phenomenon of diesel knocking with the help of P-Ø diagram.

Description : Explain the phenomenon of diesel knocking with the help of P-Ø diagram.

Last Answer : Explanation- The knock phenomenon of C.I. engine depends upon delay period. If delay period is small then less amount of fuel is admitted into cylinder. When small amount of ... I. engines, higher compression ratio causes lesser ignition delay and hence lesser possibility of diesel knocks.

Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Description : Draw P-Q diagram for stages of combustion in SI engine and write stages of combustion with its explanation.

Last Answer : The stages of combustion in S.I. engine: Stage I: Ignition Lag or Preparation Phase: It is a chemical process which depends on-nature of fuel, temperature & pressure, ... The rate of combustion reduces due to surface of the flame front becoming smaller and reduction in turbulence.

Draw P-ⱷ diagram showing stages of combustion in SI engine.

Description : Draw P-ⱷ diagram showing stages of combustion in SI engine.

Last Answer : Stages of combustion in SI engines  Stage I: Ignition Lag or Preparation Phase: The time elapsed between the fuel injection into the combustion chamber and starting of combustion. It is the growth ... reduces due to surface of the flame front becoming smaller and reduction in turbulence.   

Explain the working computer controlled EGR system.

Description : Explain the working computer controlled EGR system.

Last Answer : Exhaust Gas recirculation: EGR System is control by the ECM. A pressure sensor monitors the exhaust system pressure. The sensor signals this information of pressure to the ECM. The ECM sends the signal ... open and close the EGR valve. Thus it controls the amount of exhaust gas recalculated.

Explain the working of series hybrid vehicle.

Description : Explain the working of series hybrid vehicle.

Last Answer : Series-Hybrid vehicle In Series Hybrid vehicles, the Internal Combustion Engine (ICE) drives a generator, which charges the battery and supplies current to the electronically controlled motor. The electric motor ... have to be rated to the maximum power. It has low overall system efficiency.

Explain working of Variable Valve Timing and Electronic lift control (VTEC) system. Enlist its advantage and Drawbacks

Description : Explain working of Variable Valve Timing and Electronic lift control (VTEC) system. Enlist its advantage and Drawbacks

Last Answer : Answer: Working of Variable Valve Timing and Electronic lift control (VTEC) system:- VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system ... 2) Maintenance cost is high 3) Very complex structure required complicated control system.

Explain the working of diesel engine glow plugs with neat sketch

Description : Explain the working of diesel engine glow plugs with neat sketch

Last Answer : Glow plug is an aid for cold starting of a C.I. engine. The self-ignition temperature of diesel is 250°C. For compression ignition, the charge (air + diesel) should reach a temperature of ... plugs is automatically interrupted. But starting may be attempted again as soon as the driver wishes.   

Explain the construction and working of throttle body injection (TBI) system.

Description : Explain the construction and working of throttle body injection (TBI) system. 

Last Answer : The throttle body injection (TBI) system uses one or two injector valves mounted in a throttle body assembly. The injectors spray fuel into the top of the throttle body air horn The TBI fuel ... are then used to calculate the triggering signals for the injectors and other system actuators.  

What is hybrid vehicle? Explain working with the help of layout of a series hybrid vehicle.

Description : What is hybrid vehicle? Explain working with the help of layout of a series hybrid vehicle. 

Last Answer : Hybrid Vehicle: A hybrid vehicle is one that uses two different methods to propel the vehicle. A hybrid electric vehicle, abbreviated HEV uses both an internal combustion engine and an electric motor to propel ... have to be rated to the maximum power. It has low overall system efficiency.

Explain the working of high pressure accumulator in CRDI system.

Description : Explain the working of high pressure accumulator in CRDI system. 

Last Answer : In common rail systems, a high-pressure pump stores a reservoir of fuel at high pressure - up to and above 2,000 bars (psi). The term "common rail" refers to the fact that ... in that it only has to maintain a commanded pressure at a target (either mechanically or electronically controlled). 

Describe the working of high pressure fuel pump.

Description : Describe the working of high pressure fuel pump. 

Last Answer : Working: Downward motion of plunger: The safety valve at the inlet opens if the pre-supply pressure of fuel exceeds 1.5 bars and fuel comes and fills the chamber till the plunger moves up to BDC. ... . A constant pressure of about 1400 to 1600 bar is maintained in the common rail. 

With the help of suitable sketch describe the working of pressure regulator.

Description : With the help of suitable sketch describe the working of pressure regulator.

Last Answer : Working of pressure regulator : The fuel pump provides more fuel than the maximum required by the engine. Fuel not used by the engine is returned to the fuel tank. The fuel rail supplies all injectors. The pressure ... between 2.0 and 3.5 bar and allows excess fuel to return to the fuel tank.

List the actuators used in MPFI system and working of any one.

Description : List the actuators used in MPFI system and working of any one. 

Last Answer : Actuators of MPFI 1.Fuel Injector 2. Idle speed control valve. 3. Inlet metering valve. 4. Vacuum solenoid valve 5. Cam actuators. Fuel Injector-In MPFI system, Top feed fuel ... fuel between the Pintle and discharge opening to form a fine spray pattern that has a cone shape.  

Describe the working of EGR valve with neat sketch.

Description : Describe the working of EGR valve with neat sketch.

Last Answer : Answer: Exhaust Gas Recirculation Valve (Operation-2 marks, Sketch-2 marks) When the engine is idling, the EGR valve is closed and there is no EGR flow into the manifold. The EGR valve remains closed ... exhaust gas (less than 10% of total) to be supplied into the incoming air: fuel mixture

Describe the construction and working of D-MPFI and L-MPFI with help of neat sketch.

Description : Describe the construction and working of D-MPFI and L-MPFI with help of neat sketch.

Last Answer : D-LMFI System: It is Manifold fuel injection system.In this type, the vacuum in the intake manifold and volume of air by its density are sensed in this type of MPFI system .As air enters into ... intake manifold , the air flow sensor measures the amount of air and sends information to ECU.

Describe the working of fuel injector with neat sketch

Description : Describe the working of fuel injector with neat sketch

Last Answer : Fuel Injector: The injector assembly consists of - i) a needle valve ii) a compression spring iii) a nozzle iv) an injector body When the fuel is supplied to lift the injection ... spring tension and hence the valve opening pressure is controlled by adjusting the screw provided at the top.

Describe the working of electronically controlled diesel injection pump.

Description : Describe the working of electronically controlled diesel injection pump. 

Last Answer : Answer: Electronically controlled diesel injection pump: This is similar to conventional pumps, but its injection is controlled by Electronic Control Unit (ECU) which control solenoid valve in the injection pump ... modifies the current to the solenoid valve, to supply fuel as per requirement.  

Describe construction and working of TBI system with suitable sketch.

Description : Describe construction and working of TBI system with suitable sketch.

Last Answer : Construction and working of TBI system: Throttle Body Injection is an electronically controlled injection system in which an electronic fuel injector injects the fuel intermittently in to the intake manifold ... to calculate the triggering signals for the injectors and other system actuators.

Draw the labeled block diagram of process control system and explain each block.

Description : Draw the labeled block diagram of process control system and explain each block.

Last Answer : Explanation - Process control system consists of process or plant, sensor, error detector, automatic Controller, actuator or control element. 1) Process or plant- process means some manufacturing sequence ... process which changes the process variable. Output of this block is denoted by u .

Explain the Mechatronics system with the help of block diagram and labeled the various elements.

Description : Explain the Mechatronics system with the help of block diagram and labeled the various elements. 

Last Answer : The key elements of Mechatronics systems can be classified under following categories:  Information systems  Mechanical systems  Electrical systems  Computer systems  Sensor and actuators  ... is adjusted based on generated error and again signal is given to actuators and sensors.

Draw a neat labeled block diagram of 3-phase Electronic Energy meter.

Description :  Draw a neat labeled block diagram of 3-phase Electronic Energy meter.

Last Answer : Labeled diagram of 3-phase electronic energy meter:

Draw a labeled block diagram of sine wave generator and state function of each block.

Description : Draw a labeled block diagram of sine wave generator and state function of each block. 

Last Answer : Function Generator:  This instrument can deliver sine, triangular & square waves with frequency range of 0.01 Hz to 100 kHz.  The frequency control network is governed by a frequency ... voltage reaches a predetermined level on the negative slope of the integrator's output voltage.

Explain Evaporative emission control system.

Description : Explain Evaporative emission control system.

Last Answer : EVAP system Operation: When the engine is running, stored fuel vapours in fuel tank are purged from the canister whenever the throttle has opened past the purge port and coolant temperature is above 54 °C. ... The EVAP system is designed to limit maximum vacuum and pressure in the fuel tank.   

Explain Delay Period in detail.

Description : Explain Delay Period in detail.

Last Answer : Delay period: Ignition delay period is the time period between start of injection and start of combustion, has a great influence on the correct optimization of a diesel engine. The knock phenomenon ... with air, and mixture rose in temperature. Pre-flame reactions occur during chemical delay  

Sketch and Explain F-head combustion chamber.

Description : Sketch and Explain F-head combustion chamber.

Last Answer : In F-head combustion chamber one valve is in head and other in the block. This design is a compromise between L-head and I head combustion chambers. Advantages are : High volumetric ... This design is the complex mechanism for operation of valves and expensive special shaped piston. 

Explain engine design modification parameter to control emissions.

Description : Explain engine design modification parameter to control emissions.

Last Answer : Methods used for improving the exhaust emission under the engine design modification are 1. Use of leaner air-fuel ratios: The carburetor may be modified to provide relatively lean air fuel ... tolerances and using special type of carburetors. This also includes fuel injection in manifold.  

Explain the methods of fuel injection used EFI system.

Description : Explain the methods of fuel injection used EFI system.

Last Answer : Methods of fuel injection: 1. Sequential fuel injection. (SFI) 2. Grouped fuel injection. 3. Simultaneous fuel injection. 4. Continuous injection. 1. Simultaneous Injection: Injection of fuel ... of the fuel injection is determined by ECU depending upon load and speed. 

Explain the pollutants from gasoline engine

Description : Explain the pollutants from gasoline engine

Last Answer : 1. Hydrocarbon (HC):-They play an important role in forming NO2 and O3 which are health and environmental hazard.  2. Carbon Monoxide (CO): CO is a highly poisonous gas that can cause dizziness, ... effect, NO2 is a very toxic gas and contributes to the formation of smog, ozone, and acid rain.

Explain the following properties i) Pour point ii) Viscosity iii) Ignition quality iv) Fire point

Description : Explain the following properties i) Pour point ii) Viscosity iii) Ignition quality iv) Fire point

Last Answer : i. Pour point: Pour point is the temperature below which the entire mass of fuel, solid or liquid together, freeze and thus cause flow of fuel impossible. Pour point is usually 5 to 10 °C below ... is the temperature at which the flash will sustain itself as a steady flame for at least five seconds.

List and Explain two type of diesel smoke. Explain four cause of diesel smoke.

Description : List and Explain two type of diesel smoke. Explain four cause of diesel smoke.

Last Answer : Answer: Two type of diesel smoke 1) Blue-white smoke 2) Black smoke Four cause of diesel smoke:- 1) Blue smoke is due to burning the droplets of lubricating oil in combustion ... because of worn piston rings & cylinder liners & water come in combustion chamber because cracked water jacket.

List three sources of pollutant from gasoline engine. Explain evaporative losses in detail.

Description : List three sources of pollutant from gasoline engine. Explain evaporative losses in detail.

Last Answer : Answer: Three sources of pollutant from gasoline engine:- 1) Carburettor losses 2) Crankcase blow-by 3) Engine exhaust emission Evaporative losses:-  1. Carburettor losses: occur due ... due to incomplete combustion, the exhaust gas also contains carbon monoxide, unburnt hydrocarbons (UBHC).

List eight ways of reducing pollution. Explain PCV and evaporative emission system with suitable sketch.

Description : List eight ways of reducing pollution. Explain PCV and evaporative emission system with suitable sketch.

Last Answer : Eight ways of reducing pollution:-  1) Optimize Ignition Advance 2) Use unleaded gasoline & Low sulphur diesel 3) Use leaner air fuel ratio 4) Use exhaust gas treatment devices ex Catalytic ... check valve. The EVAP system is designed to limit maximum vacuum and pressure in the fuel tank.

List four types of combustion chambers used in S.I. engine. Explain any one in detail with neat sketch.

Description : List four types of combustion chambers used in S.I. engine. Explain any one in detail with neat sketch.

Last Answer : Combustion chambers used in S.I. engine:- 1) T - Head 2) I - Head. 3) F - Head. 4) L - Head 5) Divided combustion chamber. 1. T Head Type Combustion chambers.  This ... and therefore more heat loss. 4. Valve size restricted. 6. Thermal failure in cylinder block also. 

List out the methods for evaporation control and explain any one.

Description : List out the methods for evaporation control and explain any one.

Last Answer : Methods for evaporation control:- 1. Charcoal Canister System (for Fuel tank and carburetor float bowl emissions 2. Positive Crankcase Ventilation (PCV) System (for crankcase ... crankcase ventilation performance is optimized, while engine performance and drivability remains unaffected.

Explain VVT mechanism and state any two advantages of it.

Description : Explain VVT mechanism and state any two advantages of it.

Last Answer : Variable valve timing (VVT) is a system for varying the valve opening of an internal combustion engine. This allows the engine to deliver high power, but also to work tractably and efficiently at low power ... handling of engine valve. 5) It lowers the exhaust emission. 6) It increases torque. 

Explain Biodiesel fuel. Give any four applications.

Description : Explain Biodiesel fuel. Give any four applications.

Last Answer : Biodiesel diesel  Bio diesel is a vegetable oil or animal fat based diesel fuel. It consists of long chain alkyl esters. It is made chemically reacting liquids with an alcohol. i) It is a ... diesel with 20% biodiesel) 4.Generatore 5.Air craft engines 6.Heating oil in domestic commercial boiler

Explain the effect of positive crankcase ventilation (PCV) system on engine emission.

Description : Explain the effect of positive crankcase ventilation (PCV) system on engine emission. 

Last Answer : PCV system: The purpose of PCV system is to remove the harmful gases from the crankcase before damage occurs and combine them with the engine's normal incoming air: fuel mixture. ... is optimized, while engine performance and drivability remains unaffected positive crankcase ventilation

Explain any two engine modifications and two fuel modifications to control emission from gasoline engine.

Description : Explain any two engine modifications and two fuel modifications to control emission from gasoline engine. 

Last Answer : Methods used for improving the exhaust emission under the engine design modification are 1. Use of leaner air-fuel ratios: The carburetor may be modified to provide relatively lean air ... Fuel Volatility: Fuel volatility is compromise of high volatility and low volatility to control the pollution