How much is 14.5 inches to mm?

How much is 14.5 inches to mm?
by

1 Answer

Answer :

It is 368.3 mm, because 1 inch is equal to 25.4 mm so14.5*25.4=368.3 mm
by

Related questions

How many inches is 129 mm?

Description : How many inches is 129 mm?

Last Answer : It is approx 5.1 inches.

How much greater is the area of a large pizza with a diameter of 8 inches than a medium pizza with a diameter of 7 inches use 3.14 for pi.?

Description : How much greater is the area of a large pizza with a diameter of 8 inches than a medium pizza with a diameter of 7 inches use 3.14 for pi.?

Last Answer : 6

I'm 14, 5 feet and 5 inches tall, and weigh 130 pounds, am I overweight?

Description : I'm 14, 5 feet and 5 inches tall, and weigh 130 pounds, am I overweight?

Last Answer : Nope. If your 130 lbs is composed entirely of flab, maybe get more exercise to tone up and be healthy, but just on the face of it, 130 is not overweight for 5“5”. Welcome to Fluther.

I cut a wild grapevine 14 inches from the ground. Will it survive,and if so, how long will it take to grow back??

Description : I cut a wild grapevine 14 inches from the ground. Will it survive,and if so, how long will it take to grow back??

Last Answer : Need Answer

What is the circumstances of a circle with a radius of 9.7 inches Use 3.14 for pi?

Description : What is the circumstances of a circle with a radius of 9.7 inches Use 3.14 for pi?

Last Answer : I assume you mean "circumference".The circumference of a circle with a radius of 9.7 inches is 60.95 inches.Circumference = 2 * pi * radius-or-2 * 3.14 * 9.7 = 60.95

How tall is 61 inches and 14 centimeters?

Description : How tall is 61 inches and 14 centimeters?

Last Answer : Need answer

In converting 14 centimeters to inches what unit (omit the number) would you place in the numerator of your ratio?

Description : In converting 14 centimeters to inches what unit (omit the number) would you place in the numerator of your ratio?

Last Answer : 1 inch = 2.54 cm14 cm = 14/2.54 inch

Which is more 1 foot or 14 inches?

Description : Which is more 1 foot or 14 inches?

Last Answer : 14 inches is more than 1 foot which is 12 inches

If rectangle measures 3 14 inches by 3 34 inches. What is its area?

Description : If rectangle measures 3 14 inches by 3 34 inches. What is its area?

Last Answer : 3.25 x 3.75 = 12.1875 square inches

Pipes having diameter 14 inches or more are designated by their (A) Outside diameter (B) Inside diameter (C) Schedule number (D) None of these

Description : Pipes having diameter 14 inches or more are designated by their (A) Outside diameter (B) Inside diameter (C) Schedule number (D) None of these

Last Answer : (A) Outside diamete

A guardrail system must be fitted if the distance between a working platform a wall is more than? a. 100mm (4 inches) b. 360mm (14 inches) c. 200mm (8 inches) d. 460mm (18 inches)

Description : A guardrail system must be fitted if the distance between a working platform a wall is more than? a. 100mm (4 inches) b. 360mm (14 inches) c. 200mm (8 inches) d. 460mm (18 inches)

Last Answer : b. 360mm (14 inches)

The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Description : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Last Answer : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

If the radius of the circle above is 30 mm. What is the circumference of the circle (Use 3.14.)?

Description : If the radius of the circle above is 30 mm. What is the circumference of the circle (Use 3.14.)?

Last Answer : 188.40 mm

Pressure difference between two points in vessels, pipelines or in two different pipelines can be measured by a differential manometer. The pressure difference measured as the mm of water column in case of mercury-water, differential manometer is equal to (where, H = difference in height of mercury column in mm). (A) H (B) 12.6 H (C) 13.6 H (D) 14.6 H

Description : Pressure difference between two points in vessels, pipelines or in two different pipelines can be measured by a differential manometer. The pressure difference measured as the mm of water column in case of mercury-water, differential manometer is ... mm). (A) H (B) 12.6 H (C) 13.6 H (D) 14.6 H

Last Answer : (B) 12.6 H

A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the joist will be, (A) 10 m (B) 12 m (C) 14 m (D) 16 m

Description : A rolled steel joist is simply supported at its ends and carries a uniformly distributed load which  causes a maximum deflection of 10 mm and slope at the ends of 0.002 radian. The length of the  joist will be,  (A) 10 m  (B) 12 m  (C) 14 m  (D) 16 m 

Last Answer : (D) 16 m 

If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is (A) 10 mm (B) 12 mm (C) 14 mm (D) 16 mm

Description : If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is (A) 10 mm (B) 12 mm (C) 14 mm (D) 16 mm

Last Answer : Answer: Option D

A spring of stiffness 100 N/mm used in a spring-loaded safety valve of diameter 20 mm on a boiler with the pressure inside the boiler equal to 1 MPa should be initially compressed by a. 5mm b. 3.14 mm c. 2mm d. 6.28 mm

Description : A spring of stiffness 100 N/mm used in a spring-loaded safety valve of diameter 20 mm on a boiler with the pressure inside the boiler equal to 1 MPa should be initially compressed by a. 5mm b. 3.14 mm c. 2mm d. 6.28 mm

Last Answer : b. 3.14 mm

A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Description : A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Last Answer : d.16.27 mm.

A cantilever of length 3m carries a point load of 60 KN at a distance of 2m from the fixed end.If E= 2×105 and I=108, what is the deflection at the free end?. a.7 mm b.14 mm c.26 mm d.52 mm.

Description : A cantilever of length 3m carries a point load of 60 KN at a distance of 2m from the fixed end.If E= 2×105 and I=108, what is the deflection at the free end?. a.7 mm b.14 mm c.26 mm d.52 mm.

Last Answer : b.14 mm

What is the maximum shear stress induced in a solid shaft of 50 mm diameter which is subjected to both bending moment and torque of 300 kN.mm and 200 kN.mm respectively? a. 9.11 N/mm2 b. 14.69 N/mm2 c. 16.22 N/mm2 d. 20.98 N/mm2

Description : What is the maximum shear stress induced in a solid shaft of 50 mm diameter which is subjected to both bending moment and torque of 300 kN.mm and 200 kN.mm respectively? a. 9.11 N/mm2 b. 14.69 N/mm2 c. 16.22 N/mm2 d. 20.98 N/mm2

Last Answer : b. 14.69 N/mm2

A square object of 4 mm is subjected to a force of 3000 N. What is the maximum allowable shear stress acting on it? a. 250.14 mm2 b. 281.25 mm2 c. 400.32 mm2 d. 500 mm2

Description : A square object of 4 mm is subjected to a force of 3000 N. What is the maximum allowable shear stress acting on it? a. 250.14 mm2 b. 281.25 mm2 c. 400.32 mm2 d. 500 mm2

Last Answer : b. 281.25 mm2

What is the dia of thimble ? (i) 14-16 mm (ii) 16-18 mm* (iii) 18-20 mm (iv) None of the above

Description : What is the dia of thimble ? (i) 14-16 mm (ii) 16-18 mm* (iii) 18-20 mm (iv) None of the above

Last Answer : (ii) 16-18 mm*

nternal diameter of thimble in conventional type of crucible is? (i) 14-16 mm (i) 16-18 mm (iii) 18-20 mm* (iv) 20-22 mm

Description : nternal diameter of thimble in conventional type of crucible is? (i) 14-16 mm (i) 16-18 mm (iii) 18-20 mm* (iv) 20-22 mm

Last Answer : (iii) 18-20 mm*

What is the difference between rail flange of 60 kg & 52 rail section a. 20 mm b. 18 mm c. 14 mm* d. 16 mm

Description : What is the difference between rail flange of 60 kg & 52 rail section a. 20 mm b. 18 mm c. 14 mm* d. 16 mm

Last Answer : c. 14 mm

A wire of 0.14 mm diameter and specific resistance 9.6 micro ohm-cm is 440 cm long. The resistance of the wire will be

Last Answer : A wire of 0.14 mm diameter and specific resistance 9.6 micro-ohm-cm is 440 cm long. The resistance of the wire will be 27.4 ohm.