Pipes having diameter 14 inches or more are designated by their (A) Outside diameter (B) Inside diameter (C) Schedule number (D) None of these

Pipes having diameter 14 inches or more are designated by their
(A) Outside diameter
(B) Inside diameter
(C) Schedule number
(D) None of these
by

1 Answer

Answer :

(A) Outside diamete
by

Related questions

All pipes of a particular nominal size have the same (A) Inside diameter (B) Outside diameter (C) Thickness (D) None of these

Description : All pipes of a particular nominal size have the same (A) Inside diameter (B) Outside diameter (C) Thickness (D) None of these

Last Answer : (B) Outside diameter

The equivalent diameter for the annulus of a double pipe heat exchanger, whose inner pipe has fins on the outside is __________ compared to the same size pipes without fins. (A) More (B) Less (C) Same (D) Unpredictable

Description : The equivalent diameter for the annulus of a double pipe heat exchanger, whose inner pipe has fins on the outside is __________ compared to the same size pipes without fins. (A) More (B) Less (C) Same (D) Unpredictable

Last Answer : (B) Less

Q No: 78 Hume steel pipes are A. Steel pipes B. Steel shell coated from inside with cement mortar C. Steel shell coated from outside with cement mortar D. Both B. and C.

Description : Q No: 78 Hume steel pipes are A. Steel pipes B. Steel shell coated from inside with cement mortar C. Steel shell coated from outside with cement mortar D. Both B. and C.

Last Answer : ANS: D

The ratio of strengths of solid to hollow shafts, both having outside diameter D and hollow having inside diameter D/2, in torsion, is (A) 1/4 (B) 1/2 (C) 1/16 (D) 15/15

Description : The ratio of strengths of solid to hollow shafts, both having outside diameter D and hollow having  inside diameter D/2, in torsion, is  (A) 1/4  (B) 1/2  (C) 1/16  (D) 15/15 

Last Answer : (D) 15/15 

The ratio of strengths of solid to hollow shafts, both having outside diameter D and hollow having inside diameter D/2, in torsion, is a.1/4 b. 1/2 c. 1/16 d. 15/16

Description : The ratio of strengths of solid to hollow shafts, both having outside diameter D and hollow having inside diameter D/2, in torsion, is a.1/4 b. 1/2 c. 1/16 d. 15/16

Last Answer : d. 15/16

How much greater is the area of a large pizza with a diameter of 8 inches than a medium pizza with a diameter of 7 inches use 3.14 for pi.?

Description : How much greater is the area of a large pizza with a diameter of 8 inches than a medium pizza with a diameter of 7 inches use 3.14 for pi.?

Last Answer : 6

The main reason a manufacturer may try to prohibit intermediaries from selling its products outside designated sales territories is to 1. tighten its control over distribution of its products 2. discourage competition from other manufacturers 3. incorporate selective distribution 4. contain costs 5. none of these

Description : The main reason a manufacturer may try to prohibit intermediaries from selling its products outside designated sales territories is to 1. tighten its control over distribution of its products 2. ... other manufacturers 3. incorporate selective distribution 4. contain costs 5. none of these

Last Answer : tighten its control over distribution of its products

The main reason a manufacturer may try to prohibit intermediaries from selling its products outside designated sales territories is to A)tighten its control over distribution of its products. B)discourage competition from other manufacturers. C)incorporate selective distribution. D)contain costs.

Description : The main reason a manufacturer may try to prohibit intermediaries from selling its products outside designated sales territories is to A)tighten its control over distribution of its products. B)discourage competition from other manufacturers. C)incorporate selective distribution. D)contain costs.

Last Answer : A)tighten its control over distribution of its products.

Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the first fluid, the pressure drop will (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Description : Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the ... (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Last Answer : (B) Decrease

The most economical flow control valve for use with large diameter pipes is a (A) Butterfly valve (B) Globe valve (C) Needle valve (D) None of these

Description : The most economical flow control valve for use with large diameter pipes is a (A) Butterfly valve (B) Globe valve (C) Needle valve (D) None of these

Last Answer : (A) Butterfly valve

Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement(A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Description : Consider two pipes of same length and diameter through which water is passed at the same velocity. The friction factor for rough pipe is f1 and that for smooth pipe is f2 . Pick out the correct statement. (A) f1 = f2 (B) f1 < f2 (C) f1 > f2 (D) Data not sufficient to relate f1 & f2

Last Answer : (C) f1 > f2

Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Description : Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Last Answer : options A

Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Description : Larger length & diameter water pipes are made by (A) Electrical resistance welding (B) Die casting (C) Semi-centrifugal casting (D) Continuous casting

Last Answer : Option C

Large diameter reinforced cement concrete (RCC) pipes are generally joined by __________ joint. (A) Flanged iron (B) Collar (C) Flexible (D) Expansion

Description : Large diameter reinforced cement concrete (RCC) pipes are generally joined by __________ joint. (A) Flanged iron (B) Collar (C) Flexible (D) Expansion

Last Answer : Option B

Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Description : Pick up the correct statement from the following: (A) All pipes and fittings are classified according to their diameters (B) The diameter of the pipes is the nominal diameter of internal bore (C) All pipes are measured along the centre line of the pipes in metres (D) All the above

Last Answer : (D) All the above

Size of boiler tubes is specified by a) Mean diameter and thickness b) Inside diameter and thickness c) Outside diameter and thickness d) Outside diameter and inside diameter

Description : Size of boiler tubes is specified by a) Mean diameter and thickness b) Inside diameter and thickness c) Outside diameter and thickness d) Outside diameter and inside diameter

Last Answer : c) Outside diameter and thickness

A spring of stiffness 100 N/mm used in a spring-loaded safety valve of diameter 20 mm on a boiler with the pressure inside the boiler equal to 1 MPa should be initially compressed by a. 5mm b. 3.14 mm c. 2mm d. 6.28 mm

Description : A spring of stiffness 100 N/mm used in a spring-loaded safety valve of diameter 20 mm on a boiler with the pressure inside the boiler equal to 1 MPa should be initially compressed by a. 5mm b. 3.14 mm c. 2mm d. 6.28 mm

Last Answer : b. 3.14 mm

Three pipes A, B and C can fill a tank in 6 hours. After working at it together for 2 hours, C is closed and A and B can fill the remaining part in 7 hours. The number of hours taken by C alone to fill the tank is: a) 10 b) 14 c) 12 d) 13 e) 15

Description : Three pipes A, B and C can fill a tank in 6 hours. After working at it together for 2 hours, C is closed and A and B can fill the remaining part in 7 hours. The number of hours taken by C alone to fill the tank is: a) 10 b) 14 c) 12 d) 13 e) 15

Last Answer : (A+B+C) - (A+B) (A+B+C) =1/6 and (A+B+C) in 2hrs=2/6 and remaining part 1-2/6=2/3. So (A+B) in 7 hrs is 2/ (3*7) =2/21. 1/6-2/21=1/14 so answer is 14. Answer: b)

Pipes P, Q and R which fill the tank together in 12 hours are opened for 2hours after which pipe R was closed. Find the number of hours taken by pipe R to fill the tank if the remaining tank is filled in 14 hours. A) 16 B) 14 C) 20 D) 42

Description : Pipes P, Q and R which fill the tank together in 12 hours are opened for 2hours after which pipe R was closed. Find the number of hours taken by pipe R to fill the tank if the remaining tank is filled in 14 hours. A) 16 B) 14 C) 20 D) 42

Last Answer : D 1/P + 1/Q + 1/R = 1/12 Now given that first all open for 2hours, then R closed and P+Q completes in 14 hours, so (1/P + 1/Q + 1/R) *2 + (1/P + 1/Q)*14 = 1 Put 1/P + 1/Q = 1/12 – 1/R (1/12 – 1/R + 1/R) *2 + (1/12 – 1/R)*14 = 1 1/6+ 14/12 – 14/R = 1 Solve, R = 42

Diameter of raschig rings used in packed tower in industry is normally around __________ inches. (A) 2 (B) 8 (C) 12 (D) 18

Description : Diameter of raschig rings used in packed tower in industry is normally around __________ inches. (A) 2 (B) 8 (C) 12 (D) 18

Last Answer : (A) 2

Nominal Pipe Size (NPS) of a pipe less than 12 inches in diameter indicates its(A) Inner diameter(B) Outer diameter(C) Thickness(D) Neither inner nor outer diameter

Description : Nominal Pipe Size (NPS) of a pipe less than 12 inches in diameter indicates its (A) Inner diameter (B) Outer diameter (C) Thickness (D) Neither inner nor outer diameter

Last Answer : (D) Neither inner nor outer diameter

Which is the correct relationship for a centrifugal pump? (Where, D = Impeller diameter, inches H = Head developed, ft of liquid pumped N = Speed of pump, rpm) (A) D = 1840 H0.5 /N (B) D = 1840 N/H0.5 (C) H = 1840 D0.5 /N (D) D = 1840 H/N

Description : Which is the correct relationship for a centrifugal pump? (Where, D = Impeller diameter, inches H = Head developed, ft of liquid pumped N = Speed of pump, rpm) (A) D = 1840 H0.5 /N (B) D = 1840 N/H0.5 (C) H = 1840 D0.5 /N (D) D = 1840 H/N

Last Answer : (A) D = 1840 H0.5 /N

Pick up the correct statement from the following: A. The sewer pipes of sizes less than 0.4 m diameter are designed as running full at maximum discharge B. The sewer pipes of sizes greater than 0.4 m diameter are designed as running 2/3rd or 3/4th full at maximum discharge C. The minimum design velocity of sewer pipes is taken as 0.8 m/sec D. All the above

Description : Pick up the correct statement from the following: A. The sewer pipes of sizes less than 0.4 m diameter are designed as running full at maximum discharge B. The sewer pipes of sizes greater than 0.4 m ... discharge C. The minimum design velocity of sewer pipes is taken as 0.8 m/sec D. All the above

Last Answer : ANS: D

Pick up the wrong nominal internal diameter of cast iron (spun) pipes in mm from the following: (A) 300 (B) 400 (C) 550 (D) 650

Description : Pick up the wrong nominal internal diameter of cast iron (spun) pipes in mm from the following: (A) 300 (B) 400 (C) 550 (D) 650

Last Answer : (C) 550

The diameter of pipes in bath rooms and lavatories in domestic water supply, is (A) 6 mm (B) 12 mm (C) 18 mm (D) 24 mm

Description : The diameter of pipes in bath rooms and lavatories in domestic water supply, is (A) 6 mm (B) 12 mm (C) 18 mm (D) 24 mm

Last Answer : (B) 12 mm

A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of head and discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Description : A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of ... discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Last Answer : Answer: Option C

The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Description : The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Last Answer : Answer: Option D

In cement pressure grouting G.I pipes of diameter …… and ……length, should be fixed in drilled holes a) 12 to 20 mm, 200 mm* b) 12 to 20 mm, 300 mm c) 12 to 25 mm, 500 mm d) 20 to 25 mm, 300 mm

Description : In cement pressure grouting G.I pipes of diameter …… and ……length, should be fixed in drilled holes a) 12 to 20 mm, 200 mm* b) 12 to 20 mm, 300 mm c) 12 to 25 mm, 500 mm d) 20 to 25 mm, 300 mm

Last Answer : a) 12 to 20 mm, 200 mm*

It's Crohn's and colitis awareness week. Are you aware of these diseases, and what can be accomplished by having a designated week for awareness?

Description : It's Crohn's and colitis awareness week. Are you aware of these diseases, and what can be accomplished by having a designated week for awareness?

Last Answer : Can it hurt? I think not. Knowing about these has got to be benefical for the people that have to deal with them, I would think.

If PE denotes monthly average value of potential evapo–transpiration and R stands for monthly average rainfall, the period having PE/4 greater than or equal to R, is designated as...... (A) Moist (B) Humid (C) Moderately Dry (D) Severe Drought (E) Dry

Description : If PE denotes monthly average value of potential evapo–transpiration and R stands for monthly average rainfall, the period having PE/4 greater than or equal to R, is designated as...... (A) Moist (B) Humid (C) Moderately Dry (D) Severe Drought (E) Dry

Last Answer : (C) Moderately Dry

In an extended surface heat exchanger, fluid having lower co-efficient (A) Flows through the tube (B) Flows outside the tubes (C) Can flow either inside or outside the tubes (D) Should not be used as it gives very high pressure drop

Description : In an extended surface heat exchanger, fluid having lower co-efficient (A) Flows through the tube (B) Flows outside the tubes (C) Can flow either inside or outside the tubes (D) Should not be used as it gives very high pressure drop

Last Answer : (B) Flows outside the tubes

14. When the pipes are in series, the total head loss is equal to the sum of the head loss in each pipe A) Yes B) No

Description : 14. When the pipes are in series, the total head loss is equal to the sum of the head loss in each pipe A) Yes B) No

Last Answer : A

A tank is 1/4th full. Two pipes which fill the tank in 30minutes and 40 minutes respectively are opened simultaneously. After 10 minutes, a third pipe which empties the full tank in 60 minutes is also opened. In how many minutes the tank will be full? A) 14 B) 12 C) 15 D) 17

Description : A tank is 1/4th full. Two pipes which fill the tank in 30minutes and 40 minutes respectively are opened simultaneously. After 10 minutes, a third pipe which empties the full tank in 60 minutes is also opened. In how many minutes the tank will be full? A) 14 B) 12 C) 15 D) 17

Last Answer : A Since 1/4th is already filled, 3/4th is to filled now. (1/30 + 1/40)*(10+x) – (1/60)*x = ¾ 7/120(10+x)-x/60=3/4 7x-2x/120=3/4-7/12 5x/120=1/6 30x=120 X=4 So total 10+4=14minutes

In converting 14 centimeters to inches what unit (omit the number) would you place in the numerator of your ratio?

Description : In converting 14 centimeters to inches what unit (omit the number) would you place in the numerator of your ratio?

Last Answer : 1 inch = 2.54 cm14 cm = 14/2.54 inch

The pipe wall thickness is minimum for a pipe of given nominal size having schedule number (A) 160 (B) 120 (C) 80 (D) 40

Description : The pipe wall thickness is minimum for a pipe of given nominal size having schedule number (A) 160 (B) 120 (C) 80 (D) 40

Last Answer : (D) 40

A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the fifth stick on the side to which the tree should fall. During construction of a dam, a tree 18 inches in diameter was completely covered by water. Since the treetop was fouling the boat's propellers, it had to be cut down. A diver went down and put a stick of dynamite on the four sides of the tree. Since the current is flowing south at 2 knots per hour, on which side of the tree would you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Description : Dynamite is a tool that can be used to cut down trees. To cut a tree 18 inches in diameter requires five sticks of dynamite: one on the north, south, east and west sides of the tree, and the ... you instruct the diver to put the fifth stick of dynamite if you wanted the tree to fall north? -Riddles

Last Answer : It doesn't matter where the fifth stick is placed, since the tree won't fall in any direction. Being wood, it will float and rise to the surface.

the diameter of a frisbee is 12 inches. what's the area of the frisbee? -General Knowledge

Description : the diameter of a frisbee is 12 inches. what's the area of the frisbee? -General Knowledge

Last Answer : Area of a circle = pi x radius squared. Radius of a Frisbee of diameter 12 in. = 12/2 = 6 ins. Area of Frisbee = 3.14 x (6 x 6) = 3.14 x 36 = 113.04 sq in.

What decking is an acceptable repair procedure for a flatbed trailer that has a hole in its wood deck about 2 inches in diameter?

Description : What decking is an acceptable repair procedure for a flatbed trailer that has a hole in its wood deck about 2 inches in diameter?

Last Answer : What type of fire extinguishers are commercial vehiclestransporting ammunition

How many cubic inches 3 inch diameter pipe 8 ft long?

Description : How many cubic inches 3 inch diameter pipe 8 ft long?

Last Answer : how many cubic inches in a 3 inch diameter pipe 8 ft long

What is the diameter if the circumference is 4.25 inches?

Description : What is the diameter if the circumference is 4.25 inches?

Last Answer : Diameter of circle: 4.25/pi = 1.353 inches rounded to 3 decimalplaces

If The exact area of a circle is 81pi square inches what are the radius and diameter of the circle explain?

Description : If The exact area of a circle is 81pi square inches what are the radius and diameter of the circle explain?

Last Answer : The radius is 9 inches because area of circle is pi*9 squared =81pi square inches and the diameter is twice the radius which is2*9 = 18 inches

What is the Volume of a pipe .475 inches in diameter?

Description : What is the Volume of a pipe .475 inches in diameter?

Last Answer : That would depend on its length which has not been given

How many square inches in a 8 inch diameter circle?

Description : How many square inches in a 8 inch diameter circle?

Last Answer : Area = pi*42 = 50.265 square inches to 3 decimal places

A snack bar sells popcorn and cone shaped containers. One container has a diameter of 8 inches and a height of 10 inches. How many cubic inches of popcorn does the container hold (Rounded to the nearest tenth)?

Description : A snack bar sells popcorn and cone shaped containers. One container has a diameter of 8 inches and a height of 10 inches. How many cubic inches of popcorn does the container hold (Rounded to the nearest tenth)?

Last Answer : In coned shape containers*

What is the area of a circle with a diameter of 49 inches?

Description : What is the area of a circle with a diameter of 49 inches?

Last Answer : Using 3.14 as Pi the area of circle is: 1884.785

A wheel has a diameter of 21 inches. How far does it travel if it makes 30 complete revolutions?

Description : A wheel has a diameter of 21 inches. How far does it travel if it makes 30 complete revolutions?

Last Answer : I need help

An automatic ice-cream scoop serves spherical helpings of ice cream. The scoop can be adjusted to serve helpings from 1 inch in diameter to 2 inches in diameter. If Tim orders a scoop with a 2-inch diameter, and if Paul wants only half as much ice cream?

Description : An automatic ice-cream scoop serves spherical helpings of ice cream. The scoop can be adjusted to serve helpings from 1 inch in diameter to 2 inches in diameter. If Tim orders a scoop with a 2-inch diameter, and if Paul wants only half as much ice cream?

Last Answer : THE ANSWER IS 2BECAUSE..... We have to use Tim's scoop radius to calculate his scoop volume, then divide it by 2 to find Paul's scoop volume and finally calculate its radius to get the diameter. Tim's scoop radius ... to write, 4/3*pi* radius cubed= 4/6*pi(i.e. Paul's scoop volume and the volume o

A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Description : A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Last Answer : Answer: C