How does decreasing the temperature of a solid affect the motion of the particles in the solid?

How does decreasing the temperature of a solid affect the motion of the particles in the solid?
by

1 Answer

Answer :

Decreasing the temperature slows down the motion of theparticles, i.e. decreases the kinetic energy.
by
selected by

Related questions

How the forces between the particles affect the arrangement of particles in a solid?

Description : How the forces between the particles affect the arrangement of particles in a solid?

Last Answer : What is the answer ?

Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Description : Select the correct practical example of steady non-uniform flow. (A) Motion of water around a ship in a lake (B) Motion of river around bridge piers (C) Steadily decreasing flow through a reducing section (D) Steadily increasing flow through a pipe

Last Answer : (C) Steadily decreasing flow through a reducing section

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

Which of the following is not an advantage of fluidisation from transferoperation point of view?(A) Intimate contact of the fluid with all parts of the solid particles(B) Lower fluid pumping power requirement(C) Minimisation of temperature variation(D) Prevention of particle segregation

Description : Which of the following is not an advantage of fluidisation from transferoperation point of view? (A) Intimate contact of the fluid with all parts of the solid particles (B) Lower fluid pumping power requirement (C) Minimisation of temperature variation (D) Prevention of particle segregation

Last Answer : (B) Lower fluid pumping power requirement

The absolute zero is a temperature at which ______. (1) molecular motion in a gas would cease (2) water freezes (3) all gases become liquid (4) all gases become solid

Description : The absolute zero is a temperature at which ______. (1) molecular motion in a gas would cease (2) water freezes (3) all gases become liquid (4) all gases become solid

Last Answer : (1) molecular motion in a gas would cease Explanation: Absolute zero is the lowest possible temperature where nothing could be colder and no heat energy remains in a substance.

The absolute zero is a temperature at which ______. (1) molecular motion in a gas would cease (2) water freezes (3) all gases become liquid (4) all gases become solid

Description : The absolute zero is a temperature at which ______. (1) molecular motion in a gas would cease (2) water freezes (3) all gases become liquid (4) all gases become solid

Last Answer : (1) molecular motion in a gas would cease Explanation: Absolute zero is the lowest possible temperature where nothing could be colder and no heat energy remains in a substance.

The absolute zero is a temperature at which ______. (1) molecular motion in a gas would cease (2) water freezes (3) all gases become liquid (4) all gases become solid

Description : The absolute zero is a temperature at which ______. (1) molecular motion in a gas would cease (2) water freezes (3) all gases become liquid (4) all gases become solid

Last Answer : (1) molecular motion in a gas would cease Explanation: Absolute zero is the lowest possible temperature where nothing could be colder and no heat energy remains in a substance. It is the point at which all motion in matter stops.

The absolute zero is a temperature at which - (1) Molecular motion in a gas would cease (2) Water freezes (3) All gases become liquid (4) All gases become solid

Description : The absolute zero is a temperature at which - (1) Molecular motion in a gas would cease (2) Water freezes (3) All gases become liquid (4) All gases become solid

Last Answer : (1) Molecular motion in a gas would cease Explanation: Absolute zero is the lowest possible temperature where nothing could be colder and no heat energy remains in a substance. That temperature Molecular motion in a gas would cease.

Fluid motion in the natural convection heat transfer between a solid surface and a fluid in contact with it, results from the (A) Existence of thermal boundary layer (B) Temperature gradient produced due to density difference (C) Buoyancy of the bubbles produced at active nucleation site (D) None of these

Description : Fluid motion in the natural convection heat transfer between a solid surface and a fluid in contact with it, results from the (A) Existence of thermal boundary layer (B) Temperature gradient produced ... difference (C) Buoyancy of the bubbles produced at active nucleation site (D) None of these

Last Answer : (D) None of these

The absolute zero is a temperature at which _______ (1) molecular motion in a gas would cease (2) water freezes (3) all gases become liquid (4) all gases become solid

Description : The absolute zero is a temperature at which _______ (1) molecular motion in a gas would cease (2) water freezes (3) all gases become liquid (4) all gases become solid

Last Answer : molecular motion in a gas would cease

The falling rate period in the drying of a solid is characterised by (A) Increase in rate of drying (B) Increasing temperatures both on the surface and within the solid (C) Decreasing temperatures (D) None of these

Description : The falling rate period in the drying of a solid is characterised by (A) Increase in rate of drying (B) Increasing temperatures both on the surface and within the solid (C) Decreasing temperatures (D) None of these

Last Answer : (B) Increasing temperatures both on the surface and within the solid

How does the decreasing the gas volume affect the pressure of a gas?

Description : How does the decreasing the gas volume affect the pressure of a gas?

Last Answer : The pressure increase.

Internal auditing can affect the scope of the external auditor's audit of financial statements by a. Decreasing the external auditor's need to perform detailed testsb. Eliminating the need to observe thephysical inventory taking.c. Allowing the external auditor to limithis/her audit to the performance ofsubstantive test procedures.d. Limiting direct testing by the externalauditor to management assertions notdirectly tested by internal auditing.

Description : Internal auditing can affect the scope of the external auditor's audit of financial statements by a. Decreasing the external auditor's need to perform detailed tests b. Eliminating the need ... direct testing by the external auditor to management assertions not directly tested by internal auditing.

Last Answer : Decreasing the external auditor's need to perform detailed tests

The statement the resultant of the external forces applied to a body (rigid or non-rigid) composed of a system of particles is equivalent to the vector summation of the effective forces acting on all particles-is known as a.Corollary to Newton's laws of motion b.Principle of dynamics c.D' Alembert's principle d.Nowton's law e.Mohr's principle

Description : The statement the resultant of the external forces applied to a body (rigid or non-rigid) composed of a system of particles is equivalent to the vector summation of the effective forces acting on all ... motion b.Principle of dynamics c.D' Alembert's principle d.Nowton's law e.Mohr's principle

Last Answer : c. D' Alembert's principle

In which type of waves is the motion of the particles perpendicular to the direction of the wave is traveling?

Description : In which type of waves is the motion of the particles perpendicular to the direction of the wave is traveling?

Last Answer : transverse waves

The study of particles or bodies when they are at rest or in motion is dealt with?

Description : The study of particles or bodies when they are at rest or in motion is dealt with?

Last Answer : Mechanics

For motion of spherical particles in a stationary fluid, the drag co￾efficient in hindered settling compared to that in free settling is (A) More (B) Less (C) Equal (D) More or less, depending on the type of particle

Description : For motion of spherical particles in a stationary fluid, the drag co￾efficient in hindered settling compared to that in free settling is (A) More (B) Less (C) Equal (D) More or less, depending on the type of particle

Last Answer : (A) More

The ratio of the wall drag to the form drag in the Stoke's law range (for motion of spherical particles in a stationary fluid) is (A) 0.5 (B) 1 (C) 2 (D) 0.33

Description : The ratio of the wall drag to the form drag in the Stoke's law range (for motion of spherical particles in a stationary fluid) is (A) 0.5 (B) 1 (C) 2 (D) 0.33

Last Answer : (C) 2

Drag co-efficient for motion of spherical particles in a stationary fluid in the stoke's law range is (A) 24/NRe,P (B) 16/NRe,P (C) 64/NRe,P (D) 48/NRe,P

Description : Drag co-efficient for motion of spherical particles in a stationary fluid in the stoke's law range is (A) 24/NRe,P (B) 16/NRe,P (C) 64/NRe,P (D) 48/NRe,P

Last Answer : (A) 24/NRe,P

Flagella move the cell by A- .many flagella beating in a synchronous, whip-like motion B- an individual flagellum beating in a whip-like motion C- spinning like a propellerD- attaching to nearby particles and contracting

Description : Flagella move the cell by A- .many flagella beating in a synchronous, whip-like motion B- an individual flagellum beating in a whip-like motion C- spinning like a propeller D- attaching to nearby particles and contracting

Last Answer : spinning like a propeller

Flagella move the cell by A- many flagella beating in a synchronous, whip-like motion B- an individual flagellum beating in a whip-like motion C- spinning like a propeller D-.attaching to nearby particles and contracting

Description : Flagella move the cell by A- many flagella beating in a synchronous, whip-like motion B- an individual flagellum beating in a whip-like motion C- spinning like a propeller D-.attaching to nearby particles and contracting

Last Answer : spinning like a propeller

Which one of the following statement is incorrect regarding the electromagnetic radiation? (A) These are produced by the motion of electric charge (B) The oscillation of charged particles sets up changing electric fields (C) The changing electric fields induce the changing magnetic fields in the surrounding medium (D) None of these

Description : Which one of the following statement is incorrect regarding the electromagnetic radiation? (A) These are produced by the motion of electric charge (B) The oscillation of charged particles sets up ... electric fields induce the changing magnetic fields in the surrounding medium (D) None of these

Last Answer : Answer: Option D

A magnetic field acts on a charged particles so as to change its: a. speed b. energy c. direction of motion d. all of these

Description : A magnetic field acts on a charged particles so as to change its: a. speed b. energy c. direction of motion d. all of these

Last Answer : Only direction of motion will change ...it means velocity will change but speed same

In liquids and gases the current is due to the motion a. negative charges b. positive charges c. both negative and positive charges d. neutral particles

Description : In liquids and gases the current is due to the motion a. negative charges b. positive charges c. both negative and positive charges d. neutral particles

Last Answer : c. both negative and positive charges

A charged particle is moving in a UNIFORM magnetic field. If the direction of motion of the charged particle is at right angles to the magnetic field, describe the shape of the charged particle's path.

Description : A charged particle is moving in a UNIFORM magnetic field. If the direction of motion of the charged particle is at right angles to the magnetic field, describe the shape of the charged particle's path.

Last Answer : ANSWER: CIRCULAR or CIRCLE

The random motion of particles suspended in a fluid is called: w) Boson Condensation x) Fermi Motion y) Brownian Motion z) Pauli Motion

Description : The random motion of particles suspended in a fluid is called: w) Boson Condensation x) Fermi Motion y) Brownian Motion z) Pauli Motion

Last Answer : ANSWER: Y -- BROWNIAN MOTION

A charged particle is moving in a UNIFORM magnetic field. If the direction of motion of the charged particle is parallel to the magnetic field, describe the shape of the charged particle's path.

Description : A charged particle is moving in a UNIFORM magnetic field. If the direction of motion of the charged particle is parallel to the magnetic field, describe the shape of the charged particle's path. 

Last Answer : ANSWER: STRAIGHT LINE

Which of the following statements is not one of the three basic assumptions of the kinetic theory? w) Matter is composed of very tiny particles. x) The particles of matter are in constant motion. y) The particles of matter lose energy in collisions.

Description : Which of the following statements is not one of the three basic assumptions of the kinetic theory? w) Matter is composed of very tiny particles. x) The particles of matter are in constant motion. y) The particles of matter lose energy in collisions. 

Last Answer : ANSWER: Y -- THE PARTICLES OF MATTER LOSE ENERGY IN COLLOSIONS 

Is Bromine a solid, a liquid or a gas when the particles are far apart and random?

Description : Is Bromine a solid, a liquid or a gas when the particles are far apart and random?

Last Answer : sorry i found out the answer its gasim so dumbhahathanks :)

What is a solid made up of particles that form a regular repeating pattern?

Description : What is a solid made up of particles that form a regular repeating pattern?

Last Answer : Need answer

How much space do solid particles take up?

Description : How much space do solid particles take up?

Last Answer : That will vary from particle to particle.

Are the particles in a hot solid vibrate more than those in an identical but cold solid?

Description : Are the particles in a hot solid vibrate more than those in an identical but cold solid?

Last Answer : yes they do

What instrument could be used to measure a mole of solid solute particles?

Description : What instrument could be used to measure a mole of solid solute particles?

Last Answer : We could use a laboratory scale to measure a mole of solid material. A mole represents Avogadro's number of atoms or molecules of the solid material. Table salt, sodium chloride, for instance has a weight ... be the instrument to use to measure that and to measure out a mole of most other solids.

When heat is removed, particles in a solid, liquid, or gas do what?

Description : When heat is removed, particles in a solid, liquid, or gas do what?

Last Answer : State Changes If you give the particles energy; or take energy away from them; then you can change their state. If you heat up a solid - you give it some energy. This causes the particles to move more and ... into a liquid, or melt. If the liquid is heated then it may evaporate and turn into a gas.

‘Aerosol’ is - (1) Suspended solid particles in air (2) Pollutant gas, present in air (3) (8) Microbes, present in air (4) Green house gas present in air

Description : ‘Aerosol’ is - (1) Suspended solid particles in air (2) Pollutant gas, present in air (3) (8) Microbes, present in air (4) Green house gas present in air

Last Answer : (1) Suspended solid particles in air

Pick up the correct statement from the following: A. The water supply pipes carry pure water free from solid particles B. The water supply pipes get clogged if flow velocity is less than self cleansing velocity C. The sewers may be carried up and down the hills and valleys D. The sewer pipes are generally laid along level hills

Description : Pick up the correct statement from the following: A. The water supply pipes carry pure water free from solid particles B. The water supply pipes get clogged if flow velocity is less than self ... carried up and down the hills and valleys D. The sewer pipes are generally laid along level hills

Last Answer : ANS: A

Colloid which contains particles of liquid or solid dispersed in gas?

Description : Colloid which contains particles of liquid or solid dispersed in gas?

Last Answer : Aerosol

A colloid formed between gas particles and liquid or solid particles?

Description : A colloid formed between gas particles and liquid or solid particles?

Last Answer : Foam

Ultra centrifuges are used for the separation of __________ solid particles. (A) Coarse (B) Fine (C) Colloidal (D) Dissolved

Description : Ultra centrifuges are used for the separation of __________ solid particles. (A) Coarse (B) Fine (C) Colloidal (D) Dissolved

Last Answer : (C) Colloidal

Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will just take hold of a particle and draw it in the crushing zone (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing (D) Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Description : Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will ... Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Last Answer : (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing

Which of the following is not accomplished by agitation of liquids in agitators? (A) Dispersing gas in liquid (B) Blending of immiscible liquids (C) Dispersing immiscible liquid in form of emulsion (D) Suspending solid particles

Description : Which of the following is not accomplished by agitation of liquids in agitators? (A) Dispersing gas in liquid (B) Blending of immiscible liquids (C) Dispersing immiscible liquid in form of emulsion (D) Suspending solid particles

Last Answer : (B) Blending of immiscible liquids

A screen is said to be blinded, when the (A) Over-sizes are present in undersize fraction (B) Under-sizes are retained in oversize fraction (C) Screen is plugged with solid particles (D) Screen capacity is abruptly increased

Description : A screen is said to be blinded, when the (A) Over-sizes are present in undersize fraction (B) Under-sizes are retained in oversize fraction (C) Screen is plugged with solid particles (D) Screen capacity is abruptly increased

Last Answer : (C) Screen is plugged with solid particles

Solid particles separation based on the difference in their flow velocities through fluids is termed as the (A) Clarification (B) Classification (C) Elutriation (D) Sedimentation

Description : Solid particles separation based on the difference in their flow velocities through fluids is termed as the (A) Clarification (B) Classification (C) Elutriation (D) Sedimentation

Last Answer : (B) Classification

Separation of a suspension or slurry into a supernatant clear liquid (free from particles) and a thick sludge containing a high concentration of solid is called (A) Classification (B) Sedimentation (C) Clarification (D) Decantation

Description : Separation of a suspension or slurry into a supernatant clear liquid (free from particles) and a thick sludge containing a high concentration of solid is called (A) Classification (B) Sedimentation (C) Clarification (D) Decantation

Last Answer : (B) Sedimentation

Number of particles in a crushed solid sample is given by (where, m = mass of particles in a sample, Vp = volume of one particle, ρ= density of particles) (A) m/ρ . Vp (B) m . ρ/Vp (C) m . Vp /ρ (D) Vp /m . ρ

Description : Number of particles in a crushed solid sample is given by (where, m = mass of particles in a sample, Vp = volume of one particle, ρ= density of particles) (A) m/ρ . Vp (B) m . ρ/Vp (C) m . Vp /ρ (D) Vp /m . ρ

Last Answer : (A) m/ρ . Vp

Solid particles of different densities are separated by (A) Filters (B) Thickness (C) Cyclones (D) Sorting classifier

Description : Solid particles of different densities are separated by (A) Filters (B) Thickness (C) Cyclones (D) Sorting classifier

Last Answer : (D) Sorting classifier

Separation of solid particles based on their densities is called (A) Sizing (B) Sorting (C) Clarification (D) Dispersion

Description : Separation of solid particles based on their densities is called (A) Sizing (B) Sorting (C) Clarification (D) Dispersion

Last Answer : (B) Sorting

A globe valve is the most suitable for applications, in which (A) Fluid flow control is required (B) Fluid contains dispersed solid particles (C) Valve is required to be either fully open or fully closed (D) One way flow is required

Description : A globe valve is the most suitable for applications, in which (A) Fluid flow control is required (B) Fluid contains dispersed solid particles (C) Valve is required to be either fully open or fully closed (D) One way flow is required

Last Answer : (A) Fluid flow control is required

The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Description : Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Last Answer : (B) In sedimentation tanks equipped with mechanical scrapper