What instrument could be used to measure a mole of solid solute particles?

What instrument could be used to measure a mole of solid solute particles?
by

1 Answer

Answer :

We could use a laboratory scale to measure a mole of solid material. A mole represents Avogadro's number of atoms or molecules of the solid material. Table salt, sodium chloride, for instance has a weight of 58.44277 grams per mole. The scale in the chemistry lab would be the instrument to use to measure that and to measure out a mole of most other solids.
by

Related questions

Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is nonlinear in the case of steady state unimolal unidirectional diffusion (C) Azeotropes obey Raoult's law at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Description : Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial ... at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Last Answer : (C) Azeotropes obey Raoult's law at all temperature

. In a solution containing 0.30 Kg mole of solute and 600 kg of solvent, the molality is (A) 0.50 (B) 0.60 (C) 1 (D) 2

Description : . In a solution containing 0.30 Kg mole of solute and 600 kg of solvent, the molality is (A) 0.50 (B) 0.60 (C) 1 (D) 2

Last Answer : (A) 0.50

A molar solution is one that contains one mole of a solute in [IIT 1986] (A) 1000 g of the solvent (B) One litre of the solvent (C) One litre of the solution (D) 22.4 litres of the solution

Description : A molar solution is one that contains one mole of a solute in [IIT 1986] (A) 1000 g of the solvent (B) One litre of the solvent (C) One litre of the solution (D) 22.4 litres of the solution

Last Answer : (C) One litre of the solution

Moles of solute divided by kilograms of solvent is expression for: w) molarity x) solute-to-solution ratio y) mole percentage z) molality

Description : Moles of solute divided by kilograms of solvent is expression for: w) molarity x) solute-to-solution ratio y) mole percentage z) molality

Last Answer : ANSWER: Z -- MOLALITY

What instrument is use to measure mass of a solid?

Description : What instrument is use to measure mass of a solid?

Last Answer : A pair of scales.

What solute particles are present in water solutions of electrolytes and nonelectrolytes?

Description : What solute particles are present in water solutions of electrolytes and nonelectrolytes?

Last Answer : What is the answer ?

What kinds of solute particles are present in h20 solutions of electrolytes and nonelectrolytes?

Description : What kinds of solute particles are present in h20 solutions of electrolytes and nonelectrolytes?

Last Answer : What is the answer ?

Why do solute particles have to be mixed with solvent particles in order to create a solution?

Description : Why do solute particles have to be mixed with solvent particles in order to create a solution?

Last Answer : That's basically what "solution" means.

Relative lowering of vapour pressure is a colligative property because_____________. (a)It depends on the concentration of a non electrolyte solute in solution and does not depend on the nature of the solute molecules. (b)It does not depends on number of particles of electrolyte solute in solution and does not depend on the nature of the solute particles. (c)It depends on the concentration of a non electrolyte solute in solution as well as on the nature of the solute molecules. (d)It depends on the concentration of an electrolyte or nonelectrolyte solutein solution as well as on the nature of solute molecules.

Description : Relative lowering of vapour pressure is a colligative property because_____________. (a)It depends on the concentration of a non electrolyte solute in solution and does not depend on the nature of ... of an electrolyte or nonelectrolyte solutein solution as well as on the nature of solute molecules.

Last Answer : (a)It depends on the concentration of a non electrolyte solute in solution and does not depend on the nature of the solute molecules.

Is a solute always solid give example from daily life?

Description : Is a solute always solid give example from daily life?

Last Answer : Need answer

What can be done to make a solid solute dissolve faster in a liquid solute?

Description : What can be done to make a solid solute dissolve faster in a liquid solute?

Last Answer : Several factors affecting solubilty are: temperature, pressure, stirring.

What is a way to reclaim solid solute from a solution?

Description : What is a way to reclaim solid solute from a solution?

Last Answer : What is the answer ?

What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Description : What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Last Answer : B. A solute and a solvent

Stage efficiency in a leaching process depends on the (A) Time of contact between the solid and the solution (B) Rate of diffusion of the solute through the solid and into the liquid (C) Both (A) and (B) (D) Vapour pressure of the solution

Description : Stage efficiency in a leaching process depends on the (A) Time of contact between the solid and the solution (B) Rate of diffusion of the solute through the solid and into the liquid (C) Both (A) and (B) (D) Vapour pressure of the solution

Last Answer : (C) Both (A) and (B)

The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) Diffusion of the solute from the solution in contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Description : The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) ... contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the flooding velocity, generally (C) 'Elution' means the desorption of the adsorbed solute by a solvent (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Description : Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the ... (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Last Answer : (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number

Description : The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number

Last Answer : (D) Dependent on the Reynolds number

In the Gold foil experiment of Geiger and Marsden, that paved the way for Rutherford’s model of an atom, ~ 1.00% of the α-particles were found to deflect at angles > 50º. If one mole of α- -Science

Description : In the Gold foil experiment of Geiger and Marsden, that paved the way for Rutherford’s model of an atom, ~ 1.00% of the α-particles were found to deflect at angles > 50º. If one mole of α- -Science

Last Answer : Total number of α particles used for bombardment = 1 mole 1 mole=6.022×1023 particles number of α particles deflected at angles greater than 50°(>50°)= 1% Number of α particles ... at angles less than 50°= 99/100 × 6.022 × 1023 =5.96 × 1023

The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Description : The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Last Answer : (4) parts per million Explanation: PPM is an abbreviation of Parts Per Million. It is commonly used as a measure of small levels of pollutants in air, water, body fluids, etc. Parts per million is the mass ratio between the pollutant component and the solution.

The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Description : The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Last Answer : parts per million

Solid Sulphur (32 g/mole)pH = 7.16pH in ppm?

Description : Solid Sulphur (32 g/mole)pH = 7.16pH in ppm?

Last Answer : PO43−

The energy required to melt one mole of a solid at its melting point is called one of the following. w) the molar heat of fusion x) the molar hear of vaporization y) the molar heat of capacity z) the melting point

Description : The energy required to melt one mole of a solid at its melting point is called one of the following. w) the molar heat of fusion x) the molar hear of vaporization y) the molar heat of capacity z) the melting point

Last Answer : ANSWER: W -- THE MOLAR HEAT OF FUSION

The volume of a colloidal particle `V_C` as compared to the volume of a solute particle in a true solution `V_S` could be

Description : The volume of a colloidal particle `V_C` as compared to the volume of a solute particle in a true solution `V_S` could be

Last Answer : The volume of a colloidal particle `V_C` as compared to the volume of a solute particle in a true solution `V_S` could ... `~ 10^(-3)` D. `~ 10^(3)`

Is Bromine a solid, a liquid or a gas when the particles are far apart and random?

Description : Is Bromine a solid, a liquid or a gas when the particles are far apart and random?

Last Answer : sorry i found out the answer its gasim so dumbhahathanks :)

What is a solid made up of particles that form a regular repeating pattern?

Description : What is a solid made up of particles that form a regular repeating pattern?

Last Answer : Need answer

How much space do solid particles take up?

Description : How much space do solid particles take up?

Last Answer : That will vary from particle to particle.

How does decreasing the temperature of a solid affect the motion of the particles in the solid?

Description : How does decreasing the temperature of a solid affect the motion of the particles in the solid?

Last Answer : Decreasing the temperature slows down the motion of theparticles, i.e. decreases the kinetic energy.

How the forces between the particles affect the arrangement of particles in a solid?

Description : How the forces between the particles affect the arrangement of particles in a solid?

Last Answer : What is the answer ?

Are the particles in a hot solid vibrate more than those in an identical but cold solid?

Description : Are the particles in a hot solid vibrate more than those in an identical but cold solid?

Last Answer : yes they do

When heat is removed, particles in a solid, liquid, or gas do what?

Description : When heat is removed, particles in a solid, liquid, or gas do what?

Last Answer : State Changes If you give the particles energy; or take energy away from them; then you can change their state. If you heat up a solid - you give it some energy. This causes the particles to move more and ... into a liquid, or melt. If the liquid is heated then it may evaporate and turn into a gas.

‘Aerosol’ is - (1) Suspended solid particles in air (2) Pollutant gas, present in air (3) (8) Microbes, present in air (4) Green house gas present in air

Description : ‘Aerosol’ is - (1) Suspended solid particles in air (2) Pollutant gas, present in air (3) (8) Microbes, present in air (4) Green house gas present in air

Last Answer : (1) Suspended solid particles in air

Pick up the correct statement from the following: A. The water supply pipes carry pure water free from solid particles B. The water supply pipes get clogged if flow velocity is less than self cleansing velocity C. The sewers may be carried up and down the hills and valleys D. The sewer pipes are generally laid along level hills

Description : Pick up the correct statement from the following: A. The water supply pipes carry pure water free from solid particles B. The water supply pipes get clogged if flow velocity is less than self ... carried up and down the hills and valleys D. The sewer pipes are generally laid along level hills

Last Answer : ANS: A

Colloid which contains particles of liquid or solid dispersed in gas?

Description : Colloid which contains particles of liquid or solid dispersed in gas?

Last Answer : Aerosol

A colloid formed between gas particles and liquid or solid particles?

Description : A colloid formed between gas particles and liquid or solid particles?

Last Answer : Foam

Ultra centrifuges are used for the separation of __________ solid particles. (A) Coarse (B) Fine (C) Colloidal (D) Dissolved

Description : Ultra centrifuges are used for the separation of __________ solid particles. (A) Coarse (B) Fine (C) Colloidal (D) Dissolved

Last Answer : (C) Colloidal

Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will just take hold of a particle and draw it in the crushing zone (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing (D) Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Description : Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will ... Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Last Answer : (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing

Which of the following is not accomplished by agitation of liquids in agitators? (A) Dispersing gas in liquid (B) Blending of immiscible liquids (C) Dispersing immiscible liquid in form of emulsion (D) Suspending solid particles

Description : Which of the following is not accomplished by agitation of liquids in agitators? (A) Dispersing gas in liquid (B) Blending of immiscible liquids (C) Dispersing immiscible liquid in form of emulsion (D) Suspending solid particles

Last Answer : (B) Blending of immiscible liquids

A screen is said to be blinded, when the (A) Over-sizes are present in undersize fraction (B) Under-sizes are retained in oversize fraction (C) Screen is plugged with solid particles (D) Screen capacity is abruptly increased

Description : A screen is said to be blinded, when the (A) Over-sizes are present in undersize fraction (B) Under-sizes are retained in oversize fraction (C) Screen is plugged with solid particles (D) Screen capacity is abruptly increased

Last Answer : (C) Screen is plugged with solid particles

Solid particles separation based on the difference in their flow velocities through fluids is termed as the (A) Clarification (B) Classification (C) Elutriation (D) Sedimentation

Description : Solid particles separation based on the difference in their flow velocities through fluids is termed as the (A) Clarification (B) Classification (C) Elutriation (D) Sedimentation

Last Answer : (B) Classification

Separation of a suspension or slurry into a supernatant clear liquid (free from particles) and a thick sludge containing a high concentration of solid is called (A) Classification (B) Sedimentation (C) Clarification (D) Decantation

Description : Separation of a suspension or slurry into a supernatant clear liquid (free from particles) and a thick sludge containing a high concentration of solid is called (A) Classification (B) Sedimentation (C) Clarification (D) Decantation

Last Answer : (B) Sedimentation

Number of particles in a crushed solid sample is given by (where, m = mass of particles in a sample, Vp = volume of one particle, ρ= density of particles) (A) m/ρ . Vp (B) m . ρ/Vp (C) m . Vp /ρ (D) Vp /m . ρ

Description : Number of particles in a crushed solid sample is given by (where, m = mass of particles in a sample, Vp = volume of one particle, ρ= density of particles) (A) m/ρ . Vp (B) m . ρ/Vp (C) m . Vp /ρ (D) Vp /m . ρ

Last Answer : (A) m/ρ . Vp

Solid particles of different densities are separated by (A) Filters (B) Thickness (C) Cyclones (D) Sorting classifier

Description : Solid particles of different densities are separated by (A) Filters (B) Thickness (C) Cyclones (D) Sorting classifier

Last Answer : (D) Sorting classifier

Separation of solid particles based on their densities is called (A) Sizing (B) Sorting (C) Clarification (D) Dispersion

Description : Separation of solid particles based on their densities is called (A) Sizing (B) Sorting (C) Clarification (D) Dispersion

Last Answer : (B) Sorting

Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids (C) Particles movement from higher concentration to lower concentration takes place in diffusion process (D) According to Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Description : Pick out the wrong statement. (A) The binary diffusivity in liquids is of the order of 10 -5 cm2 /sec (B) Molecular diffusion in solid is much faster than that in liquids ( ... Poiseuille's law, the permeability decreases with increase in temperature for flow of a gas through a given capillary

Last Answer : (B) Molecular diffusion in solid is much faster than that in liquids

A globe valve is the most suitable for applications, in which (A) Fluid flow control is required (B) Fluid contains dispersed solid particles (C) Valve is required to be either fully open or fully closed (D) One way flow is required

Description : A globe valve is the most suitable for applications, in which (A) Fluid flow control is required (B) Fluid contains dispersed solid particles (C) Valve is required to be either fully open or fully closed (D) One way flow is required

Last Answer : (A) Fluid flow control is required

The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Which of the following is not an advantage of fluidisation from transferoperation point of view?(A) Intimate contact of the fluid with all parts of the solid particles(B) Lower fluid pumping power requirement(C) Minimisation of temperature variation(D) Prevention of particle segregation

Description : Which of the following is not an advantage of fluidisation from transferoperation point of view? (A) Intimate contact of the fluid with all parts of the solid particles (B) Lower fluid pumping power requirement (C) Minimisation of temperature variation (D) Prevention of particle segregation

Last Answer : (B) Lower fluid pumping power requirement

Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Description : Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Last Answer : (B) In sedimentation tanks equipped with mechanical scrapper

Sooty and sulphurous smog formed due to combustion of fossil fuels particularly in winter, continues throughout the day and night. When the moist atmospheric air's water vapor condenses on the solid particles of smoke thereby forming smog (smoke + fog), it causes (A) Poor visibility due to sky darkening (B) Irritation in eyes (C) Respiratory trouble (D) All (A), (B) and (C)

Description : Sooty and sulphurous smog formed due to combustion of fossil fuels particularly in winter, continues throughout the day and night. When the moist atmospheric air's water vapor condenses on the solid particles of smoke thereby ... B) Irritation in eyes (C) Respiratory trouble (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Description : A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)