A globe valve is the most suitable for applications, in which (A) Fluid flow control is required (B) Fluid contains dispersed solid particles (C) Valve is required to be either fully open or fully closed (D) One way flow is required

A globe valve is the most suitable for applications, in which
(A) Fluid flow control is required
(B) Fluid contains dispersed solid particles
(C) Valve is required to be either fully open or fully closed
(D) One way flow is required
by

1 Answer

Answer :

(A) Fluid flow control is required
by

Related questions

For the same terminal conditions and valve size, the pressure drop in a fully opened globe valve as compared to that in a gate valve is (A) More (B) Less (C) Equal (D) Either (A) or (B); depends on the viscosity of the fluid

Description : For the same terminal conditions and valve size, the pressure drop in a fully opened globe valve as compared to that in a gate valve is (A) More (B) Less (C) Equal (D) Either (A) or (B); depends on the viscosity of the fluid

Last Answer : (A) More

While starting an axial flow pump, its delivery valve should be kept (A) Open (B) Closed (C) Either open or closed (D) None of these

Description : While starting an axial flow pump, its delivery valve should be kept (A) Open (B) Closed (C) Either open or closed (D) None of these

Last Answer : (A) Open

Colloid which contains particles of liquid or solid dispersed in gas?

Description : Colloid which contains particles of liquid or solid dispersed in gas?

Last Answer : Aerosol

The valve used for very remote and accurate control of fluid is a __________ valve. (A) Needle (B) Globe (C) Gate (D) Butterfly

Description : The valve used for very remote and accurate control of fluid is a __________ valve. (A) Needle (B) Globe (C) Gate (D) Butterfly

Last Answer : (A) Needle

While starting a centrifugal pump, its delivery valve should be kept (A) Opened (B) Closed (C) Either opened or closed; it does not make any difference (D) Either opened or closed; depending on the fluid viscosity

Description : While starting a centrifugal pump, its delivery valve should be kept (A) Opened (B) Closed (C) Either opened or closed; it does not make any difference (D) Either opened or closed; depending on the fluid viscosity

Last Answer : (B) Closed

The most economical flow control valve for use with large diameter pipes is a (A) Butterfly valve (B) Globe valve (C) Needle valve (D) None of these

Description : The most economical flow control valve for use with large diameter pipes is a (A) Butterfly valve (B) Globe valve (C) Needle valve (D) None of these

Last Answer : (A) Butterfly valve

Which of the following facilitates close control of flow of fluids? (A) Gate valve (B) Globe valve (C) Butterfly valve (D) Check valve

Description : Which of the following facilitates close control of flow of fluids? (A) Gate valve (B) Globe valve (C) Butterfly valve (D) Check valve

Last Answer : (B) Globe valve

Remote control valve is a __________ valve. (A) Gate (B) Butterfly (C) Needle (D) Globe

Description : Remote control valve is a __________ valve. (A) Gate (B) Butterfly (C) Needle (D) Globe

Last Answer : (B) Butterfly

Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Centrifugal pumps as compared to reciprocating pumps (A) Run at a lower speed for the same discharge (B) Do not need priming (C) Deliver fluid with pulsating/fluctuating discharge (D) Can be run with discharge line valve closed for a short interval

Description : Centrifugal pumps as compared to reciprocating pumps (A) Run at a lower speed for the same discharge (B) Do not need priming (C) Deliver fluid with pulsating/fluctuating discharge (D) Can be run with discharge line valve closed for a short interval

Last Answer : (D) Can be run with discharge line valve closed for a short interval

In a/an __________ vessel, the fluid enters and leaves following plug flow. (A) Open (B) Closed (C) Open-closed (D) Close-opened

Description : In a/an __________ vessel, the fluid enters and leaves following plug flow. (A) Open (B) Closed (C) Open-closed (D) Close-opened

Last Answer : (B) Closed

Main gas valve in a gaseous fuel burner is a __________ valve. (A) Gate (B) Butterfly (C) Globe (D) None of these

Description : Main gas valve in a gaseous fuel burner is a __________ valve. (A) Gate (B) Butterfly (C) Globe (D) None of these

Last Answer : (A) Gate

Which of the following valves will incur maximum pressure drop for the same discharge of water? (A) Globe valve (B) Gate valve (C) Needle valve (D) Butterfly valve

Description : Which of the following valves will incur maximum pressure drop for the same discharge of water? (A) Globe valve (B) Gate valve (C) Needle valve (D) Butterfly valve

Last Answer : (C) Needle valve

Check in a centrifugal pump is (A) Provided in the discharge line (B) Generally a globe valve (C) Provided to prevent liquid from backing up through the pump when the pump is turned off or accidently stops running (D) All (A), (B) and (C)

Description : Check in a centrifugal pump is (A) Provided in the discharge line (B) Generally a globe valve (C) Provided to prevent liquid from backing up through the pump when the pump is turned off or accidently stops running (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A 2" gate valve fitted in a pipe is replaced by a similar globe valve. Pressure drop in gate valve was Δp. For the same discharge, the pressure drop across globe valve is (A) Δp (B) < Δp (C) > Δp (D) Δp

Description : A 2" gate valve fitted in a pipe is replaced by a similar globe valve. Pressure drop in gate valve was Δp. For the same discharge, the pressure drop across globe valve is (A) Δp (B) < Δp (C) > Δp (D) Δp

Last Answer : (C) > Δp

The valve commonly used in pipes larger than 2" dia is a (A) Globe valve (B) Plug-cock (C) Gate valve (D) Check valve

Description : The valve commonly used in pipes larger than 2" dia is a (A) Globe valve (B) Plug-cock (C) Gate valve (D) Check valve

Last Answer : (C) Gate valve

Choking in case of pipe flow means that a (A) Specified mass flow rate cannot be achieved (B) Valve is closed in the line (C) Restriction in flow cross-section area occurs (D) None of these

Description : Choking in case of pipe flow means that a (A) Specified mass flow rate cannot be achieved (B) Valve is closed in the line (C) Restriction in flow cross-section area occurs (D) None of these

Last Answer : (B) Valve is closed in the line

Which of the following factors control the design of a fluid-solid reactor? (A) Reaction kinetics for single particle (B) Size distribution of solids being treated (C) Flow patterns of solids and fluid in the reactor (D) All (A), (B) and (C)

Description : Which of the following factors control the design of a fluid-solid reactor? (A) Reaction kinetics for single particle (B) Size distribution of solids being treated (C) Flow patterns of solids and fluid in the reactor (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (C) Chemical reaction

For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (B) Diffusion through ash layer

In a fully turbulent flow (Re > 10 5 ) in a pipe of diameter 'd', for a constant pressure gradient, the dependence of volumetric flow rate of an incompressible fluid is (A) d(B) d2(C) d2.5(D) d

Description : In a fully turbulent flow (Re > 10 5 ) in a pipe of diameter 'd', for a constant pressure gradient, the dependence of volumetric flow rate of an incompressible fluid is (A) d (B) d 2 (C) d 2.5 (D) d

Last Answer : (C) d 2.5

Which of the following is not an advantage of fluidisation from transferoperation point of view?(A) Intimate contact of the fluid with all parts of the solid particles(B) Lower fluid pumping power requirement(C) Minimisation of temperature variation(D) Prevention of particle segregation

Description : Which of the following is not an advantage of fluidisation from transferoperation point of view? (A) Intimate contact of the fluid with all parts of the solid particles (B) Lower fluid pumping power requirement (C) Minimisation of temperature variation (D) Prevention of particle segregation

Last Answer : (B) Lower fluid pumping power requirement

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Nature of fluid flow during the opening of a valve in a pipeline is (A) Laminar (B) Unsteady (C) Steady (D) Uniform

Description : Nature of fluid flow during the opening of a valve in a pipeline is (A) Laminar (B) Unsteady (C) Steady (D) Uniform

Last Answer : (B) Unsteady

Check valve provided in the discharge line of a centrifugal pump serves the purpose of controlling the (A) Back flow of fluid in the event of stoppage of pump (B) Discharge pressure (C) Flow of liquid during operation of the pump (D) All (A), (B) and (C)

Description : Check valve provided in the discharge line of a centrifugal pump serves the purpose of controlling the (A) Back flow of fluid in the event of stoppage of pump (B) Discharge pressure (C) Flow of liquid during operation of the pump (D) All (A), (B) and (C)

Last Answer : (A) Back flow of fluid in the event of stoppage of pump

There is a lamp inside a photography darkroom. When the darkroom door is closed, it is impossible to tell from outside the room whether or not the lamp is on. There are two switches outside the door of the darkroom. One or both of the switches may control the lamp. It also could be that neither of the switches control the lamp. All you know is that the light bulb is currently off and that the lamp and bulb are in working condition. The darkroom door is closed and once you open the door you cannot touch either of the switches. If you can only open the dark-room door one time, how can you tell which switches, if any, control the lamp? -Riddles

Description : There is a lamp inside a photography darkroom. When the darkroom door is closed, it is impossible to tell from outside the room whether or not the lamp is on. There are two switches outside the door of ... dark-room door one time, how can you tell which switches, if any, control the lamp? -Riddles

Last Answer : Turn the first switch on and leave it on for ten minutes. After ten minutes, turn that switch off and turn the second switch on. Open the darkroom door, and lightly (in case it is hot) touch the ... one controls the lamp. If the lamp is off, and the bulb is cool, neither switch controls the lamp.

__________ column is the most suitable for achieving the best performance for mass transfer operations involving liquid with dispersed solids. (A) Wetted wall (B) Packed (C) Plate (D) Spray

Description : __________ column is the most suitable for achieving the best performance for mass transfer operations involving liquid with dispersed solids. (A) Wetted wall (B) Packed (C) Plate (D) Spray

Last Answer : C) Plate

Smoke is an example of (A) Solid dispersed in liquid (B) Solid dispersed in gas (C) Liquid dispersed in gas (D) Gas dispersed in liquid

Description : Smoke is an example of (A) Solid dispersed in liquid (B) Solid dispersed in gas (C) Liquid dispersed in gas (D) Gas dispersed in liquid

Last Answer : (B) Solid dispersed in gas

What is double disc globe valve?

Description : What is double disc globe valve?

Last Answer : Answer: Has two discs bearing on separate seats spaced apart, on a single shaft, for low torque, used for control valves.

Where WYE body globe valve is used?

Description : Where WYE body globe valve is used?

Last Answer : Answer: In line ports with stem emerging at 45 degree, for erosive fluids due to smoother flow pattern.

Where plug type disc globe valve is used?

Description : Where plug type disc globe valve is used?

Last Answer : Answer: For severe regulating service with gritty liquids such as boiler feedwater and for blow off service.

What are types of globe valve?

Description : What are types of globe valve?

Last Answer : Answer: Angle globe valve, plug type disc globe valve, WYE-body globe valve, composite disc globe valve, double disc globe valve.

What are characteristics of globe valve stem?

Description : What are characteristics of globe valve stem?

Last Answer : Answer: Always rising design, with disk nut at the lower end and handwheel at upper end.

What are globe valve disk types?

Description : What are globe valve disk types?

Last Answer : Answer: Flat faced type for positive shutoff, loose plug type for plug renewal or needle type for finer control.

What are globe valve port types?

Description : What are globe valve port types?

Last Answer : Answer: Full port: More than 85% of bore size, Reducer port: One size less than the connected pipe.

How to install a globe valve?

Description : How to install a globe valve?

Last Answer : Answer: Globe valve should be installed such that the flow is from the underside of the disk, Usually flow direction is marked on the globe valve.

In order to take a current reading with a 'clamp-on' ammeter, the instrument's jaws _________________. A. should remain open B. cannot touch the adjacent conductor C. must be fully closed D. will act as a transformer primary

Description : In order to take a current reading with a 'clamp-on' ammeter, the instrument's jaws _________________. A. should remain open B. cannot touch the adjacent conductor C. must be fully closed D. will act as a transformer primary

Last Answer : Answer: C

The Tyndall effect is observed only when following conditions are satisfied : (a) The diameter of the dispersed particles is much smaller than the wav

Description : The Tyndall effect is observed only when following conditions are satisfied : (a) The diameter of the dispersed particles is much smaller than the wav

Last Answer : The Tyndall effect is observed only when following conditions are satisfied : (a) The diameter of the dispersed particles ... ) and (c) D. (a) and (d)

Comprehension # 2 The clouds consist of charged particles of water dispersed in air. Some of them are +vely charged, others are -vely charged. When +v

Description : Comprehension # 2 The clouds consist of charged particles of water dispersed in air. Some of them are +vely charged, others are -vely charged. When +v

Last Answer : Comprehension # 2 The clouds consist of charged particles of water dispersed in air. Some of them ... dispersed in air by aeroplanes D. None of these

Comprehension # 2 The clouds consist of charged particles of water dispersed in air. Some of them are +vely charged, others are -vely charged. When +v

Description : Comprehension # 2 The clouds consist of charged particles of water dispersed in air. Some of them are +vely charged, others are -vely charged. When +v

Last Answer : Comprehension # 2 The clouds consist of charged particles of water dispersed in air. Some of them are + ... C. it helps in coagulation D. all of them

Comprehension # 2 The clouds consist of charged particles of water dispersed in air. Some of them are +vely charged, others are -vely charged. When +v

Description : Comprehension # 2 The clouds consist of charged particles of water dispersed in air. Some of them are +vely charged, others are -vely charged. When +v

Last Answer : Comprehension # 2 The clouds consist of charged particles of water dispersed in air. Some of them are ... sol"` C. neutral sol D. True solution

What are the size of dispersed particles of a solution?

Description : What are the size of dispersed particles of a solution?

Last Answer : In a true solution particles are not visible.

If an electric field is applied to a colloidal sol, the dispersed phase particles are found to move towards the electrode of opposite charge. If however, the dispersed phase is made stationary, the dispersion medium is found to move in the opposite direction. What is the term used for such movement of dispersion medium ?

Description : If an electric field is applied to a colloidal sol, the dispersed phase particles are found to move towards the electrode of opposite charge. If however, the dispersed phase is made stationary, the ... move in the opposite direction. What is the term used for such movement of dispersion medium ?

Last Answer : Ans. Electro osmosis. 

Dispersed type of soil structure is an arrangement comprising particles having (A) Face to face or parallel orientation (B) Edge to edge orientation (C) Edge to face orientation (D) All of the above

Description : Dispersed type of soil structure is an arrangement comprising particles having (A) Face to face or parallel orientation (B) Edge to edge orientation (C) Edge to face orientation (D) All of the above

Last Answer : Answer: Option A

A streamline is a line in flow field, (A) That is traced by all the fluid particles passing through a given point (B) Along which a fluid particle travels (C) Such that at every point on it, the velocity is tangential to it (D) None of these

Description : A streamline is a line in flow field, (A) That is traced by all the fluid particles passing through a given point (B) Along which a fluid particle travels (C) Such that at every point on it, the velocity is tangential to it (D) None of these

Last Answer : (C) Such that at every point on it, the velocity is tangential to it

In turbulent flow, the (A) Fluid particles move in an orderly manner (B) Momentum transfer is on molecular scale only (C) Shear stress is caused more effectively by cohesion than momentum transfer (D) Shear stresses are generally larger than in a similar laminar flow

Description : In turbulent flow, the (A) Fluid particles move in an orderly manner (B) Momentum transfer is on molecular scale only (C) Shear stress is caused more effectively by cohesion than momentum transfer (D) Shear stresses are generally larger than in a similar laminar flow

Last Answer : (D) Shear stresses are generally larger than in a similar laminar flow

. In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with increasing Reynolds number (C) Point of maximum instability exists at a distance of 2r/3 from the pipe wall (r = pipe radius) (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Description : . In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with ... , shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Last Answer : (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid(C) The flow of fluid through the pipe is suddenly brought to rest by closing of the valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Description : The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid (C) The flow of fluid through the pipe is suddenly brought to ... valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Last Answer : Answer: Option C

Which statement is true about a cloud computing environment? A. It cannot be used to host location based applications. B. It enables users to access systems regardless of their location. C. It introduces latency as the servers are geographically dispersed. D. It can improve a web server response time by having servers closer to the end user.

Description : Which statement is true about a cloud computing environment? A. It cannot be used to host location based applications. B. It enables users to access systems regardless of their location. C. It introduces ... D. It can improve a web server response time by having servers closer to the end user.

Last Answer : It enables users to access systems regardless of their location.