What are the half-reactions for galvanic cell with Ni and Mg electrodes?

What are the half-reactions for galvanic cell with Ni and Mg electrodes?
by

1 Answer

Answer :

Ni2+(aq) + 2e- Ni(s) and Mg(s) Mg2+(aq) + 2e-
by
selected by

Related questions

What are half reactions for a galvanic cell with Zn and Ni electrons?

Description : What are half reactions for a galvanic cell with Zn and Ni electrons?

Last Answer : What is the answer ?

What is oxidized in galvanic cell made with silver and nickel electrodes?

Description : What is oxidized in galvanic cell made with silver and nickel electrodes?

Last Answer : The nickel metal(apex)

(a) What are fuel cells? Explain the electrode reactions involved in the working of H2 – O2 fuel cell. (b) Represent the galvanic cell in which the reaction Zn (s) + Cu2+ (aq) → Zn2+ (aq) + Cu (s) takes place. -Chemistry

Description : (a) What are fuel cells? Explain the electrode reactions involved in the working of H2 – O2 fuel cell. (b) Represent the galvanic cell in which the reaction Zn (s) + Cu2+ (aq) → Zn2+ (aq) + Cu (s) takes place. -Chemistry

Last Answer : (a) Fuel cells : These cells are the devices which convert the energy produced during combustion of fuels like H2, CH4, etc. directly into electrical energy. The electrode reaction for H2 – O2 fuel cell : (b) The galvanic cell may be represented as Zn (s) | Zn2+ (1M) || Cu2+ (1M) | Cu (s)

What is Galvanic Cell or Valtic Cell ?

Description : What is Galvanic Cell or Valtic Cell ?

Last Answer : : Galvanic or voltaic cells are those cells where electrical energy is produced by chemical reactions of substances inside the cell. In galvanic cells, usually two electrodes made up of two different ... between the two electrolytic solutions . A U -shaped glass contains a solution of KCl salt.

What is Galvanic Cell ? What is a galvanic cell ?

Description : What is Galvanic Cell ? What is a galvanic cell ?

Last Answer : A galvanic cell is an electrochemical cell in which a chemical reaction occurs spontaneously , that is , no external force is required for the reaction to take place .

What reaction occurs at the cathode of a galvanic cell?

Description : What reaction occurs at the cathode of a galvanic cell?

Last Answer : Feel Free to Answer

What is the voltage of a galvanic cell made with silver a d aluminum?

Description : What is the voltage of a galvanic cell made with silver a d aluminum?

Last Answer : Feel Free to Answer

What is the standard notation of a galvanic cell made with magnesium and gold?

Description : What is the standard notation of a galvanic cell made with magnesium and gold?

Last Answer : Mg(s) | Mg2+(aq) Au+(aq) | Au(s)

What is Galvanic cell ?

Description : What is Galvanic cell ?

Last Answer : A Galvanic cell or voltaic cell or electrochemical cell is a system in which a spontaneous chemical oxidation- reduction occurs and generates electrical energy.

The device used to convert solar energy into electricity is – (1) Photovoltaic cell (2) Daniell cell (3) Electrochemical cell (4) Galvanic cell

Description : The device used to convert solar energy into electricity is – (1) Photovoltaic cell (2) Daniell cell (3) Electrochemical cell (4) Galvanic cell

Last Answer : (1) Photovoltaic cell Explanation: Sunlight is converted into electricity using photovoltaics (PV). A photovoltaic system employs solar panels composed of a number of solar cells to supply usable solar power.

What is meant by Electrochemical cell . Why is it called as galvanic cell and Voltaic cell ?

Description : What is meant by Electrochemical cell . Why is it called as galvanic cell and Voltaic cell ?

Last Answer : Ans. :- The cell which converts chemical energy into electrical energy . It is called as galvanic cell and Voltaic cell after the name of scientists who first tried to convert chemical energy into electrical energy .

Define the following : Electrochemistry , Electrolyte , Non-Electrolyte , Electrolytic Cell , Galvanic or Voltaic cell , Electrolysis , Hydrolysis & electroplating.

Description : Define the following : Electrochemistry , Electrolyte , Non-Electrolyte , Electrolytic Cell , Galvanic or Voltaic cell , Electrolysis , Hydrolysis & electroplating.

Last Answer : Ans : (a) Electrochemistry : Electrochemistry is the branch of chemistry which deals with such chemical reactions involving the inter-conversion of electrical energy and chemical energy. Example : Batteries , ... should be a solution of the coating metal, such as its metal nitrate or sulfate.

___________ converts electrical energy into chemical energy. a) Galvanic cell b) Voltaic cell c) Electrolytic cell d) Leclanche cell

Description : ___________ converts electrical energy into chemical energy. a) Galvanic cell b) Voltaic cell c) Electrolytic cell d) Leclanche cell

Last Answer : c) Electrolytic cell

The device used to convert solar energy into electricity is (1) Photovoltaic cell (2) Daniell cell (3) Electrochemical cell (4) Galvanic cell

Description : The device used to convert solar energy into electricity is (1) Photovoltaic cell (2) Daniell cell (3) Electrochemical cell (4) Galvanic cell

Last Answer : Photovoltaic cell

The core metal of chlorophyll is (a) Ni (b) Cu (c) Fe (d) Mg.

Description : The core metal of chlorophyll is (a) Ni (b) Cu (c) Fe (d) Mg.

Last Answer : d) Mg.

Consider the following reactions `underset(2)(Xe)+underset(1)(F_2)overset(Ni)to A` `underset(1)(Xe)+underset(20)(F_2)to B` `underset(1)(Xe)+underset(5

Description : Consider the following reactions `underset(2)(Xe)+underset(1)(F_2)overset(Ni)to A` `underset(1)(Xe)+underset(20)(F_2)to B` `underset(1)(Xe)+underset(5

Last Answer : Consider the following reactions `underset(2)(Xe)+underset(1)(F_2)overset(Ni)to A` `underset(1)(Xe)+underset(20 ... B D. A,B, C are act as lewis base.

What is the voltage of an electrolytic cell copper and magnesium electrodes?

Description : What is the voltage of an electrolytic cell copper and magnesium electrodes?

Last Answer : -2.71 V

The emf of a Deniell cell “Zn | Zn2+|| Cu2+| Cu” can be increased by (A) Decreasing the surface area of the electrodes (B) Increasing the concentration of zinc sulphate solution (C) Increasing the surface area of the electrodes (D) Increasing the concentration of copper sulphate solution

Description : The emf of a Deniell cell “Zn | Zn2+|| Cu2+| Cu” can be increased by (A) Decreasing the surface area of the electrodes (B) Increasing the concentration of zinc sulphate solution (C) Increasing the surface area of the electrodes (D) Increasing the concentration of copper sulphate solution

Last Answer : (D) Increasing the concentration of copper sulphate solution

Why do electrons transfer from zinc rods to copper rods in galvanic cells ?

Description : Why do electrons transfer from zinc rods to copper rods in galvanic cells ?

Last Answer : Zinc rods and zinc sulphate solutions are used at the anode of galvanic cells and copper rods and copper sulphate solutions are used at the cathode. Zinc acts as an antidote and copper as an oxidizer, ... . Thus , electrons are transferred from the zinc bar to the copper bar in the mentioned cell.

(3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be plated the negative electrode (cathode) or plate in a galvanic couple. Thus a spoon or other object may be connected by a wire to a plate of nickel. The process that occurs on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Description : (3) made cathode and a pure nickel red, the anode Explanation: Electroplating is the deposition by electrolysis of a coating of metal upon a conducting surface. The simplest system makes the object to be ... on the spoon is called reduction and, therefore, the spoon is also referred to as a cathode.

Last Answer : Which of the following is not a method of preparing oxygen? (1) Electrolysis of water (2) Fractional distillation of liquid air (3) Decomposition of potassium permanganate (4) Decomposition of manganese dioxide

Galvanic corrosion cannot be prevented by (A) Cathodic protection (B) Anodic protection (C) Usage of largest possible anodic area (D) Any one of these

Description : Galvanic corrosion cannot be prevented by (A) Cathodic protection (B) Anodic protection (C) Usage of largest possible anodic area (D) Any one of these

Last Answer : Option B

Complete the following nuclear reactions: (i) `._(7_^(14)N + ._(2)^(4)He rarr ._(8)O + ._(1)^(1)H` (ii) `.^(24)Mg + ._(2)^(4)He rarr ._(13)^(27)Al +`

Description : Complete the following nuclear reactions: (i) `._(7_^(14)N + ._(2)^(4)He rarr ._(8)O + ._(1)^(1)H` (ii) `.^(24)Mg + ._(2)^(4)He rarr ._(13)^(27)Al +`

Last Answer : Complete the following nuclear reactions: (i) `._(7_^(14)N + ._(2)^(4)He rarr ._(8)O + ._(1)^(1)H` (ii) `. ... )Li + .^(3)n rarr .^(4)He + ._(1)^(3)H`

What of the following reactions demonstrates a synthesis reaction A) Mg plus H2SO4 and gt MgSO4 plus H2 B) 2NaCl and gt 2Na plus Cl2 C) C plus O2 and gt CO2 D) Zn plus 2HCl and gt ZnCl2 plus H2?

Description : What of the following reactions demonstrates a synthesis reaction A) Mg plus H2SO4 and gt MgSO4 plus H2 B) 2NaCl and gt 2Na plus Cl2 C) C plus O2 and gt CO2 D) Zn plus 2HCl and gt ZnCl2 plus H2?

Last Answer : C+O2 →CO2

In which of the following reactions, standard reaction entropy change (S°) is positive and standard Gibb’s energy change (G°) decreases sharply with increasing temperature? (1) 2 2 1 1 1 C graphite O (g) CO (g) 2 2 2   (2) 2 1 C graphite O (g) CO(g) 2   (3) 2 2 1 CO(g) O (g) CO (g) 2   (4) 2 1 Mg(s) O (g) MgO(s) 2  

Description : In which of the following reactions, standard reaction entropy change (S°) is positive and standard Gibb's energy change (G°) decreases sharply with increasing temperature? (1) 2 2 1 1 1 C graphite O (g) CO (g) 2 2 2   (2) 2 1 C ... CO(g) O (g) CO (g) 2   (4) 2 1 Mg(s) O (g) MgO(s) 2  

Last Answer : C graphite O (g) CO(g)

Two half-reactions of an electrochemical cell are given below : MnO–4 (aq) + 8H+ (aq) + 5e– → Mn2+ (aq) + 4H2O (I), E° = 1.51 V Sn2+ (aq) → Sn4+ (aq) + 2e–, E° = + 0.15 V. Construct the redox equation from the standard potential of the cell and predict if the reaction is reactant favoured or product favoured. -Chemistry

Description : Two half-reactions of an electrochemical cell are given below : MnO-4 (aq) + 8H+ (aq) + 5e- → Mn2+ (aq) + 4H2O (I), E° = 1.51 V Sn2+ (aq) → Sn4+ (aq) + 2e- ... the redox equation from the standard potential of the cell and predict if the reaction is reactant favoured or product favoured. -Chemistry

Last Answer : The reactions can be represented at anode and at cathode in the following ways : At anode (oxidation) : Sn2+ → = Sn4+ (aq) + 2e- ] 5 E° = + 0.15 V At cathode (reduction) : MnO-4(aq) + 8H+ ... = E°cathode - E°anode = 1.51 - 0.15 = + 1.36 V ∴ Positive value of E°cell favours formation of product.

Two half-reactions of an electrochemical cell are given below : MnO–4 (aq) + 8H+ (aq) + 5e– → Mn2+ (aq) + 4H2O (I), E° = 1.51 V Sn2+ (aq) → Sn4+ (aq) + 2e–, E° = + 0.15 V. Construct the redox reaction equation from the two half-reactions and calculate the cell potential from the standard potentials and predict if the reaction is reactant or product favoured. -Chemistry

Description : Two half-reactions of an electrochemical cell are given below : MnO-4 (aq) + 8H+ (aq) + 5e- → Mn2+ (aq) + 4H2O (I), E° = 1.51 V Sn2+ (aq) → Sn4+ (aq) + ... -reactions and calculate the cell potential from the standard potentials and predict if the reaction is reactant or product favoured. -Chemistry

Last Answer : The reactions can be represented at anode and at cathode in the following ways : At anode (oxidation) : Sn2+ → Sn4+ (aq) + 2e- ] 5 E° = + 0.15 V Af cathode (reduction) : MnO-4(aq) + 8H+ ( ... = E°cathode - E°anode = 1.51 - 0.15 = + 1.36 V ∴ Positive value of E°cell favours formation of product.

Which one of the following statements is not correct? A Since voltage depends on concentrations, using standard conditions makes it easier to compare different electrochemical reactions. B We have to measure the cell potential to obtain the difference in potential energy because the potential of half-reactions cannot be measured directly. C The direction of a redox reaction can only be determined experimentally. D Half-cell potentials for half-reactions are determined by combining the relevant half-cell with a standardised half-cell.

Description : Which one of the following statements is not correct? A Since voltage depends on concentrations, using standard conditions makes it easier to compare different electrochemical reactions. B We have ... half-reactions are determined by combining the relevant half-cell with a standardised half-cell.

Last Answer : C The direction of a redox reaction can only be determined experimentally. 

When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes are

Description : When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes are

Last Answer : When the sample of copper with the zinc impurity is to be purified by electrolysis, the appropriate electrodes ... "),("Pure Zinc","ImPure Zinc"):}`

Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Description : Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Last Answer : Brine is electrolysed by using inert electrodes. The reaction at anode is_______ A. `Cl^(-)(aq.)rarr(1)/(2)Cl_(2) ... )H_(2)(g),E_("cell")^(o.)=0.00V`

When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are :

Description : When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are :

Last Answer : When the sample of Cu with Zn as impurity is to be purified by electrolysis, the appropriate electrodes are ... 4)","Impure zinc","Impure sample"):}`

Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Description : Brine is electrolysed by using inert electrodes. The reaction at anode is_______

Last Answer : Brine is electrolysed by using inert electrodes. The reaction at anode is_______ A. `Cl^(-)(aq)to(1)/(2)Cl_(2 ... 2)H_(2)(g), E_(Cell)^(otimes)=0.00V`

In what situation might in be better to position the electrodes on the upper arm and the thighs rather than lower on the arms and legs?

Description : In what situation might in be better to position the electrodes on the upper arm and the thighs rather than lower on the arms and legs?

Last Answer : Need answer

How to detect damp electrodes?

Description : How to detect damp electrodes?

Last Answer : Pre dry unusually damp electrodes for 30 - 45 minutes before final drying to minimize cracking of the coating that format.

The movement of charged particles towards one of the electrodes under the influence of electrical current is (A) Gel filtration (B) Molecular sieving (C) Gas liquid chromatography (D) Electrophoresis

Description : The movement of charged particles towards one of the electrodes under the influence of electrical current is (A) Gel filtration (B) Molecular sieving (C) Gas liquid chromatography (D) Electrophoresis

Last Answer : Answer : D

Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at eathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Description : Electrolysis of an aqueous solution of copper sulphate using copper electrodes gives (1) Copper at eathode and oxygen at anode. (2) Copper at anode and oxygen at cathode. (3) Copper at cathode and anodes dissolve to give copper. (4) Hydrogen at cathode and oxygen at anode.

Last Answer : (1) Copper at eathode and oxygen at anode. Explanation: Copper is deposited at the cathode and is dissolved at the anode. Consequently the concentration of copper ions in solution remains constant. This can be used as a method of purification of copper as only pure copper is deposited at the cathode

Whic of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc.? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon

Description : Whic of the following pairs of materials serves as electrodes in chargeable batteries commonly used in devices such as torch lights, electric shavers, etc.? (1) Iron and cadmium (2) Nickel and cadmium (3) Lead peroxide and lead (4) Zinc and carbon

Last Answer : (2) Nickel and cadmium Explanation: A rechargeable battery, storage battery, or accumulator is a type of electrical battery. It comprises one or more electrochemical cells, and is a ... sizes, ranging from button cells to megawatt systems connected to stabilize an electrical distribution network.

Substance used for making electrodes is?

Description : Substance used for making electrodes is?

Last Answer : Graphite

Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Last Answer : (B) Manganese

What maintenance of earth electrodes should be done?

Description : What maintenance of earth electrodes should be done?

Last Answer : The neighbouring soil to the earth electrode shall be kept moist where necessary, by periodically pouring water through a pipe where fitted along with it or by pouring water in the immediate ... wherever available, shall be carried out to ensure their rigidity and other signs of deterioration. 

What is gap between the electrodes in transformer oil testing kit?

Description : What is gap between the electrodes in transformer oil testing kit?

Last Answer : 0.1 Inch.

A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent period is 1.5 ms. The intracellular electrode is 6 cm form the anode of the simulator and 4.5 cm from the cathode of the simulator. What is the conduction velocity of the axon. a. 15 m/s b. 30 m/s c. 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Description : A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent ... . 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Last Answer : 30 m/s

The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Description : The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

Last Answer : (B) Flow of current through a heating element

An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace. (A) Resistance (B) Arc (C) Low frequency induction (D) None of these

Description : An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace. (A) Resistance (B) Arc (C) Low frequency induction (D) None of these

Last Answer : (B) Arc

Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres(B) As moth balls (insecticides)(C) As a fuel in furnaces(D) For making electrodes

Description : Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres (B) As moth balls (insecticides) (C) As a fuel in furnaces (D) For making electrodes

Last Answer : (C) As a fuel in furnaces

Anthracite can be used for (A) Recarbonising steel (B) Making carbon electrodes(C) Blending with highly coking coal to check its swelling which helps insaving coke even walls from damage and to produce high strength coke(D) All (A), (B) and (C)

Description : Anthracite can be used for (A) Recarbonising steel (B) Making carbon electrodes (C) Blending with highly coking coal to check its swelling which helps in saving coke even walls from damage and to produce high strength coke (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC

Description : Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC

Last Answer : (D) 60 KV DC

Coal tar is used as a (A) Binding material for coal briquettes (B) Fuel in rotary kiln (C) Binder in making carbon electrodes (D) All (A), (B) and (C)

Description : Coal tar is used as a (A) Binding material for coal briquettes (B) Fuel in rotary kiln (C) Binder in making carbon electrodes (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In electrical resistance welding, distortion results from the use of improper (A) Clamping methods (B) Electrodes (C) Current (D) Filler material

Description : In electrical resistance welding, distortion results from the use of improper (A) Clamping methods (B) Electrodes (C) Current (D) Filler material

Last Answer : (A) Clamping methods

Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Description : Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Last Answer : (B) Arc

Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the tip diameter should be equal to t (where, t = plate thickness to be welded) (C) In spot welding, two pieces to be joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Last Answer : (D) Mild steel sheet cannot be spot welded