The resistance furnace produces heat by the (A) Electric arc struck between electrodes and the charge (B) Flow of current through a heating element (C) Combination of induced current and skin effect (D) None of these

The resistance furnace produces heat by the
(A) Electric arc struck between electrodes and the charge
(B) Flow of current through a heating element
(C) Combination of induced current and skin effect
(D) None of these
by

1 Answer

Answer :

(B) Flow of current through a heating element
by

Related questions

An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace. (A) Resistance (B) Arc (C) Low frequency induction (D) None of these

Description : An electric furnace producing heat by means of an electric arc struck between each of three electrodes and the charge is called __________ furnace. (A) Resistance (B) Arc (C) Low frequency induction (D) None of these

Last Answer : (B) Arc

In low or standard frequency induction furnace, heat is produced by the (A) Combination of induced current and skin effect (B) Induction and resistance (C) Current flow through a heating element (D) None of these

Description : In low or standard frequency induction furnace, heat is produced by the (A) Combination of induced current and skin effect (B) Induction and resistance (C) Current flow through a heating element (D) None of these

Last Answer : (B) Induction and resistance

The electric furnace in which heat is produced by a combination of induced current and skin effect is called __________ furnace. (A) Arc(B) Resistance(C) Low frequency induction(D) High frequency induction

Description : The electric furnace in which heat is produced by a combination of induced current and skin effect is called __________ furnace. (A) Arc (B) Resistance (C) Low frequency induction (D) High frequency induction

Last Answer : (D) High frequency induction

Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Description : Consumable electrodes are used in the __________ welding. (A) Gas (B) Arc (C) Thermit (D) Resistance

Last Answer : (B) Arc

__________ furnace is not an electric furnace. (A) Arc (B) Induction (C) Pot (D) Resistance

Description : __________ furnace is not an electric furnace. (A) Arc (B) Induction (C) Pot (D) Resistance

Last Answer : (C) Pot

Heating a mixture of phosphate rock, coke and sand in an electric furnace produces (A) Phosphoric acid (B) Ammonium phosphate (C) Phosphorous (D) Superphosphate

Description : Heating a mixture of phosphate rock, coke and sand in an electric furnace produces (A) Phosphoric acid (B) Ammonium phosphate (C) Phosphorous (D) Superphosphate

Last Answer : (C) Phosphorous

Circuit breakers are essentially (a) current carrying contacts called electrodes (b) arc extinguishers (c) circuits to break the system (d) transformers to isolate the two systems (e) any of the above

Description : Circuit breakers are essentially (a) current carrying contacts called electrodes (b) arc extinguishers (c) circuits to break the system (d) transformers to isolate the two systems (e) any of the above

Last Answer : (a) current carrying contacts called electrodes

Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :

Description : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  (C) Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

Last Answer : Identify the correct combination of respective Electric arc welding and Electric resistance welding methods :  (A) Butt welding and Seam welding  (B) Hydrogen shielding and Projection welding  ... Seam welding and Coated electrode welding  (D) Coated electrode welding and Hydrogen shielding

Out of the following methods of heating the one which is independent of supply frequency is (A) electric arc heating (B) induction heating (C) electric resistance heating (D) dielectric heating

Description : Out of the following methods of heating the one which is independent of supply frequency is (A) electric arc heating (B) induction heating (C) electric resistance heating (D) dielectric heating

Last Answer : (C) electric resistance heating

An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. It resistance at room temperature `(27.0

Description : An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. It resistance at room temperature `(27.0

Last Answer : An electric toaster uses nichrome for its heating element. When a negligibly small current passes through it. ... range involved , `1.70xx10^-4C^-1`

Coating provided on the electrodes used in the arc welding is not expected to (A) Add alloying elements (B) Prevent electrode from contamination (C) Stabilise the arc (D) Provide protective atmosphere to weld

Description : Coating provided on the electrodes used in the arc welding is not expected to (A) Add alloying elements (B) Prevent electrode from contamination (C) Stabilise the arc (D) Provide protective atmosphere to weld

Last Answer : (B) Prevent electrode from contamination

The radiation heat flux from a heating element at a temperature of 800°C, in a furnace maintained at 300°C is 8 kW/m2 . The flux, when the element temperature is increased to 1000°C for the same furnace temperature is (A) 11.2 kW/m2(B) 12.0 kW/m2(C) 14.6 kW/m2(D) 16.5 kW/m

Description : The radiation heat flux from a heating element at a temperature of 800°C, in a furnace maintained at 300°C is 8 kW/m2 . The flux, when the element temperature is increased to 1000°C for the same furnace temperature is (A) 11.2 kW/m2 (B) 12.0 kW/m2 (C) 14.6 kW/m2 (D) 16.5 kW/m

Last Answer : (D) 16.5 kW/m2

In a furnace with heating element temperature at 1700°C, the dominant mechanism of heat transfer will be (A) Conduction (B) Radiation (C) Natural convection (D) Forced convection

Description : In a furnace with heating element temperature at 1700°C, the dominant mechanism of heat transfer will be (A) Conduction (B) Radiation (C) Natural convection (D) Forced convection

Last Answer : (B) Radiation

The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Description : The usual energy consumption in electric arc furnace steel making is __________ KWh/ton of steel. (A) 60 - 100 (B) 400 - 700 (C) 1200 -1500 (D) 2000 - 2300

Last Answer : (B) 400 - 700

The refractory lining of the bottom in a basic electric arc furnace is made of (A) Silica (B) Alumina (C) Magnesia (D) Fireclay

Description : The refractory lining of the bottom in a basic electric arc furnace is made of (A) Silica (B) Alumina (C) Magnesia (D) Fireclay

Last Answer : Option C

__________ furnace is generally used in the non-ferrous foundries. (A) Direct arc (B) Indirect arc (C) Resistance (D) Induction

Description : __________ furnace is generally used in the non-ferrous foundries. (A) Direct arc (B) Indirect arc (C) Resistance (D) Induction

Last Answer : (B) Indirect arc

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

Electric resistance seam welding uses __________ electrodes. (A) Pointed (B) Disc. (C) Flat (D) Domed

Description : Electric resistance seam welding uses __________ electrodes. (A) Pointed (B) Disc. (C) Flat (D) Domed

Last Answer : Ans: B Disc type electrodes are used for electric resistance seam welding.

Electric resistance seam welding uses_______ electrodes.

Description : Electric resistance seam welding uses_______ electrodes.(A) pointed (B) disc (C) flat (D) domed

Last Answer : Electric resistance seam welding uses disc electrodes.

Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Description : Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Last Answer : (C) Salt bath furnace

In electrical resistance welding, distortion results from the use of improper (A) Clamping methods (B) Electrodes (C) Current (D) Filler material

Description : In electrical resistance welding, distortion results from the use of improper (A) Clamping methods (B) Electrodes (C) Current (D) Filler material

Last Answer : (A) Clamping methods

Which is not accomplished in an underfired furnace? (A) Increase in heating capacity/m2 of floor space (B) Elimination of cold spot at the bottom of the charge (C) Reduction in the temperature of furnace gases (D) Protection of the periphery of the charge from excessive radiation

Description : Which is not accomplished in an underfired furnace? (A) Increase in heating capacity/m2 of floor space (B) Elimination of cold spot at the bottom of the charge (C) Reduction in the temperature of furnace gases (D) Protection of the periphery of the charge from excessive radiation

Last Answer : (A) Increase in heating capacity/m2 of floor space

Among gas and electric arc welding, which has the higher rate of heating? a) Gas welding b) Electric arc welding c) Gas welding and electric arc welding have equal rate of heating d) Cannot be determined

Description : Among gas and electric arc welding, which has the higher rate of heating? a) Gas welding b) Electric arc welding c) Gas welding and electric arc welding have equal rate of heating d) Cannot be determined

Last Answer : b) Electric arc welding

State any two applications of each for the following types of electrical heating : (i) Direct resistance heating(ii) Indirect induction heating (iii) Direct.arc heating (iv) Dielectric heating

Description : State any two applications of each for the following types of electrical heating : (i) Direct resistance heating(ii) Indirect induction heating (iii) Direct.arc heating (iv) Dielectric heating

Last Answer : (i) Direct resistance heating:- 1. This type of heating used for industrial purpose 2. Salt bath heating: This utilized for the purpose of carbonizing, tempering, quenching and hardening of steel tools 3. ... purpose. 14)In foundry for heating of sand, core, which are used in molding processes.

In the manufacture of H3 PO4 (ortho); strong H2 SO4 leaching wet process as compared to electric furnace process (A) Uses lower grade phosphate rock (B) Requires lower capital investment in the plant(C) Produces lower purity acid(D) Is very costly

Description : In the manufacture of H3 PO4 (ortho); strong H2 SO4 leaching wet process as compared to electric furnace process (A) Uses lower grade phosphate rock (B) Requires lower capital investment in the plant (C) Produces lower purity acid (D) Is very costly

Last Answer : (C) Produces lower purity acid

An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is

Description : An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately? A.385 ohms B.38.5ohms C.3.1 ohms D.31 ohms

Last Answer : 31ohns

An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately...

Description : An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately equal to: A. 385Ω B. 38.5Ω C. 3.1Ω D. 31Ω

Last Answer : An electric heater draws 3.5 A from a 110 V source. The resistance of the heating element is approximately equal to: 31Ω

Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high purity of aluminium (99.9%) (B) Keep the electrolyte in liquid condition by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Description : Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high ... by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Ingress of cold air in the furnaces through cracks, charging doors, openings etc(A) Reduces the flue gas temperature and makes the furnace atmosphereoxidising(B) Increases the load on the induced draft fan(C) Reduces the furnace draught(D) All (A), (B) and (C)

Description : Ingress of cold air in the furnaces through cracks, charging doors, openings etc (A) Reduces the flue gas temperature and makes the furnace atmosphere oxidising (B) Increases the load on the induced draft fan (C) Reduces the furnace draught (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

High ash containing coke (A) Produces more slag when used in the blast(B) Has poor strength and abrasion resistance(C) Is desirable in producer gas manufacture(D) None of these furnace

Description : High ash containing coke (A) Produces more slag when used in the blast furnace (B) Has poor strength and abrasion resistance (C) Is desirable in producer gas manufacture (D) None of these

Last Answer : (A) Produces more slag when used in the blast furnace

Moving electric charge produces - (1) magnetic field (2) sound waves (3) light rays (4) heat waves

Description : Moving electric charge produces - (1) magnetic field (2) sound waves (3) light rays (4) heat waves

Last Answer : (1) magnetic field Explanation: An electric charge always produces an electric field, regardless of speed, and a moving charge generates a magnetic field. An electric current passing through a conductor produces a magnetic field because it has many charges in motion.

Moving electric charge produces : (1) magnetic field (2) sound waves (3) light rays (4) heat waves

Description : Moving electric charge produces : (1) magnetic field (2) sound waves (3) light rays (4) heat waves

Last Answer : magnetic field

When the electric current is passed through conducting solution, there is change in colour of the solution. This indicates a) chemical effect of current b) the heating effect of current c) the magnetic effect of current d) the lightning effect of current

Description : When the electric current is passed through conducting solution, there is change in colour of the solution. This indicates a) chemical effect of current b) the heating effect of current c) the magnetic effect of current d) the lightning effect of current

Last Answer : a) chemical effect of current

Vibrations in the tubes of a shell and tube heat exchanger is induced due to the (A) Flow of fluid on the tube and shell sides (B) Oscillations in the flow of shell/tube sides fluid (C) Vibrations transmitted through piping and/or supports due to external reasons (D) All (A), (B) and (C)

Description : Vibrations in the tubes of a shell and tube heat exchanger is induced due to the (A) Flow of fluid on the tube and shell sides (B) Oscillations in the flow of shell/tube sides fluid (C) Vibrations ... piping and/or supports due to external reasons (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the tip diameter should be equal to t (where, t = plate thickness to be welded) (C) In spot welding, two pieces to be joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Last Answer : (D) Mild steel sheet cannot be spot welded

Heating of coke, sand & phosphate rock in an electric furnace is done for the manufacture of (A) Phosphoric acid (B) Superphosphate (C) Phosphorous (D) Triple superphosphate

Description : Heating of coke, sand & phosphate rock in an electric furnace is done for the manufacture of (A) Phosphoric acid (B) Superphosphate (C) Phosphorous (D) Triple superphosphate

Last Answer : (C) Phosphorous

What instrument Is the classification for a solid instrument that produces sound when it is hit scraped or struck.?

Description : What instrument Is the classification for a solid instrument that produces sound when it is hit scraped or struck.?

Last Answer : Idiophone is the classification for a solid instrument thatproduces sound when it is hit scraped or struck.

Which of the following is not applicable to liquid fuels? a) the viscosity of a liquid fuel is a measure of its internal resistance to flow. b) the viscosity of all liquid fuels decreases with increase in its temperature c) higher the viscosity of liquid fuels, higher will be its heating value d) viscous fuels need heat tracing

Description : Which of the following is not applicable to liquid fuels? a) the viscosity of a liquid fuel is a measure of its internal resistance to flow. b) the viscosity of all liquid fuels decreases with ... the viscosity of liquid fuels, higher will be its heating value d) viscous fuels need heat tracing

Last Answer : c) higher the viscosity of liquid fuels, higher will be its heating value

Find false statement about effect of sulphur in fuel? (A) It has heating value (B) It helps in electrostatic precipitation of ash in flue gases (C) It leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low (D) It erodes furnace walls

Description : Find false statement about effect of sulphur in fuel? (A) It has heating value (B) It helps in electrostatic precipitation of ash in flue gases (C) It leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low (D) It erodes furnace walls

Last Answer : (D) It erodes furnace walls

In reverberatory furnace, charge is heated mainly by (A) Conduction (B) Natural convection (C) Radiation of heat from the roof of the combustion chamber (D) None of these

Description : In reverberatory furnace, charge is heated mainly by (A) Conduction (B) Natural convection (C) Radiation of heat from the roof of the combustion chamber (D) None of these

Last Answer : (C) Radiation of heat from the roof of the combustion chamber

Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock

Description : Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock

Last Answer : (A) Type of fuels viz. solid, liquid or gaseous

In a muffle furnace, the muffle (A) Retards the heat transfer (B) Assists in temperature equalisation in the charge (C) Permits the use of controlled atmosphere for the protection of stock (D) All (A), (B) and (C)

Description : In a muffle furnace, the muffle (A) Retards the heat transfer (B) Assists in temperature equalisation in the charge (C) Permits the use of controlled atmosphere for the protection of stock (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Heat transfer rate to the stock/charge in the furnace does not depend upon the(A) Emissivity of the refractory walls(B) Size of the furnace(C) Use of waste heat recovery equipments(D) Thickness of the stock

Description : Heat transfer rate to the stock/charge in the furnace does not depend upon the (A) Emissivity of the refractory walls (B) Size of the furnace (C) Use of waste heat recovery equipments (D) Thickness of the stock

Last Answer : (C) Use of waste heat recovery equipments

In salt bath furnace, heat is transferred to the charge mainly by (A) Conduction (B) Convection (C) Radiation (D) None of these

Description : In salt bath furnace, heat is transferred to the charge mainly by (A) Conduction (B) Convection (C) Radiation (D) None of these

Last Answer : (A) Conduction

In a furnace, the heat taken by the charge/stock and the heat lost to the furnace structure & flue gases depends on the (A) Rate of firing and emissivity of flame (B) Thermal conductivity of the charge & structural materials of furnace (C) Nature of process; whether batch, continuous or intermittent (D) All (A), (B) and (C)

Description : In a furnace, the heat taken by the charge/stock and the heat lost to the furnace structure & flue gases depends on the (A) Rate of firing and emissivity of flame (B) Thermal conductivity of the charge & ... (C) Nature of process; whether batch, continuous or intermittent (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Description : Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Last Answer : b) Electric resistance welding

Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Description : Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Last Answer : (C) Coke oven battery heating

Do people struck by lightning have an electrical charge?

Description : Do people struck by lightning have an electrical charge?

Last Answer : Nope. There is not static charge build up in the body. The charge that enters your body exits through the path of least resistance. I heard once that a girl got struck in her garage and it came out of her nose ring. OUCH!

In order that current should flow without causing excessive heating or voltage drop, the relay contacts should (a) have low contact resistance (b) be clean and smooth (c) be of sufficient size and proper shape (d) have all above properties

Description : In order that current should flow without causing excessive heating or voltage drop, the relay contacts should (a) have low contact resistance (b) be clean and smooth (c) be of sufficient size and proper shape (d) have all above properties

Last Answer : (d) have all above properties

Nitric acid is produced on commercial scale in a fertiliser plant by (A) Oxidation of ammonia (B) CaNO3 + H2SO4 reaction (C) Passing air through high voltage electric arc (D) None of these

Description : Nitric acid is produced on commercial scale in a fertiliser plant by (A) Oxidation of ammonia (B) CaNO3 + H2SO4 reaction (C) Passing air through high voltage electric arc (D) None of these

Last Answer : (A) Oxidation of ammonia