List four applications of CRO.

List four applications of CRO.
by

1 Answer

Answer :

Applications of CRO:

1. It is used in laboratory for measurement of AC/DC voltage, current, frequency, phase and study nature of waveform.

2. It is used in TV receiver for creation of images.

3. It is used in radar receiver for giving visual indication of target such as aero plane, ship etc.

4. It is used to test AF circuit for different distortion.

5. It is used to check faulty component.

6. It is used to check signals at radio and TV receiver.

7. It is used to check B-H curve of different ferromagnetic material.

8. It is used in medical equipment such as ECG, patient monitor.

9. It is used to check modulation percentage of modulated wave.

10. It is also used to check radiation pattern generated by antenna.
by

Related questions

List four controls on front panel of dual trace CRO.

Description : List four controls on front panel of dual trace CRO. 

Last Answer : (i)X-shift on CRO: Controls the horizontal position of the display i.e moves the spot across the screen left and right. ii) CT MODE Button on CRO: To test different components iii) Symmetry knob on ... Button on CRO: In DUAL, operates as a DUAL trace scope in ALT or CHOP mode as selected.

List different types of CRO probes

Description : List different types of CRO probes

Last Answer : 1. Passive probes 2. Active probes 3. High voltage probes 4. Current probes 5. Differential probes

Give any four points of comparison between dual trace CRO & dual beam CRO.

Description : Give any four points of comparison between dual trace CRO & dual beam CRO.

Last Answer : Sr.N o Single Beam Dual Trace CRO Dual Beam Dual Trace CRO 1 A single electron beam is used to display two traces.  Two electron beams are used for displaying two traces/signals. ... two traces is very simple in Dual Beam oscilloscope. 6 Cost is less  Cost is high

List four applications of digital multimeter.

Description : List four applications of digital multimeter.

Last Answer : Applications : 1. It is used continuity test. 2. It is used to check diode 3. It is used to check transistor 4. It is used to measure voltage, current & resistance.

State and describe different triggering available in CRO

Description : State and describe different triggering available in CRO

Last Answer : A trigger is an external signal or input signal condition that initiates one or more instrument functions. Trigger settings include digital edges, software functions, and analog levels. This tutorial ... the external trigger input. The following figure shows an entering window trigger.  

Draw the basic block diagram of single trace CRO and describe the function of delay line.

Description : Draw the basic block diagram of single trace CRO and describe the function of delay line.

Last Answer : Function of Delay line: This block is used to delay the signal for a period of time in the vertical section of CRT. The input signal is not applied directly to the vertical plates because the part ... when the delay time is not used. Therefore, the input signal is delayed by a period of time. 

Explain the concept of single beam dual trace CRO with its block diagram.

Description : Explain the concept of single beam dual trace CRO with its block diagram.

Last Answer : Diagram:   Explanation: The single beam dual trace CRO consists of one electron gun, an electronic switch which switches the two signals to a single vertical amplifier and a single pair of ... Amplifier are identical & have the same delay time, accurate X-Y measurements can be taken. 

Explain the measurement of voltage and frequency using CRO.

Description : Explain the measurement of voltage and frequency using CRO.

Last Answer : Voltage Measurement: CRO displays the voltage signal as a function of time on its screen. The amplitude of that voltage signal is constant, but we can vary the number of divisions that cover the voltage ... /division nv is the number of divisions that cover the signal in vertical direction.

State the difference between CRO and DSO.

Description : State the difference between CRO and DSO.

Last Answer : CRO DSO Direcly reads analog voltage and displays it on screen. It reads the analog voltage and converts it into digital form before being displayed on the screen. ... DSP algorithms available and ported on microprocessor which can operate on stored samples of input voltage. 

Draw and describe horizontal deflection system in CRO

Description : Draw and describe horizontal deflection system in CRO 

Last Answer : Block Diagram: Explanation: Input from vertical amplifier is given to Horizontal system. Trigger circuit: a. A trigger circuit is used to convert the incoming signal into trigger ... : Horizontal amplifier amplifies the signal & passes the signal to horizontal plates of CRT. 

Explain how CRO is used for measurement of frequency & amplitude with suitable diagram

Description : Explain how CRO is used for measurement of frequency & amplitude with suitable diagram

Last Answer : Voltage measurement/Amplitude: The most direct voltage measurement that can be made with the help of oscilloscope is the peak to peak value. The RMS value can be calculated from peak to peak value. ... is the time between two identical points of successive cycle of the waveform.

Sketch block diagram of single trace CRO. State function of delay line.

Description : Sketch block diagram of single trace CRO. State function of delay line.

Last Answer : Function of Delay line: This block is used to delay the signal for a period of time in the vertical section of CRT. The input signal is not applied directly to the vertical plates because the part ... when the delay time is not used. Therefore, the input signal is delayed by a period of time.

State need of delay line in CRO.

Description : State need of delay line in CRO. 

Last Answer : The delay line is used in CRO to delay the signal for some time in thevertical sections. As horizontal channel consists of trigger circuit andtime based generator. This causes more time to reach ... vertical plates. For synchronization of reachinginput signal at same time to both the plates in CRT. 

Compare CRO and DSO. State the formula for phase measurement using CRO with necessary diagram.

Description : Compare CRO and DSO. State the formula for phase measurement using CRO with necessary diagram.

Last Answer : CRO DSO Directly reads analog voltage and displays it on screen. It reads the analog voltage and converts it into digital form before being displayed on the screen. ... algorithms available and ported on microprocessor which can operate on stored samples of input voltage.

Sketch Block diagram of vertical deflection system used in CRO.

Description : Sketch Block diagram of vertical deflection system used in CRO.

Last Answer : Block diagram of vertical deflection system used in CRO

Draw block diagram of CRO and explain function of each block of it.

Description : Draw block diagram of CRO and explain function of each block of it. 

Last Answer : The functions of various blocks are: 1) CRT: This is cathode ray tube which emits electrons that strike phosphor screen internally to provide visual display of signal. 2) VERTICAL AMPLIFIER ... are two power supplies a high voltage supply for CRT & low voltage supply for all circuits.

List applications of ohmmeter.

Description : List applications of ohmmeter.

Last Answer : 1. The ohmmeter is a meter for measuring electrical resistance in ohm. 2. It is used as Megger to measure high resistance. 3. It is used to test the power circuits.

List the applications of DAS.

Description : List the applications of DAS. 

Last Answer : Applications of DAS: (I) In Aerospace (II) In biomedical (III) Telemetry industries (IV) When physical quantity being monitored

State any four applications of spectrum analyzer.

Description : State any four applications of spectrum analyzer.

Last Answer : Applications: 1. Spectrum analyzer is a very important item of test equipment for someone designing or repairing electronic equipment that uses radio frequency signals. 2. Its key factor is that it is ... of the dominant frequency within a signal 8. Used to measure the properties of RF devices

List four dynamic characteristics of instruments. Define any two of them.

Description : List four dynamic characteristics of instruments. Define any two of them.

Last Answer : Dynamic characteristics of instruments are: 1. Speed of response 2. Fidelity 3. Lag 4. Dynamic error. Definition: 1. Speed of response: The rapidity with which instrument responds to make ... and the value indicated by the instrument if no static error is assumed is called as dynamic error.

List four specifications of function generator.

Description : List four specifications of function generator. 

Last Answer : Specifications: 1. Output- Square wave , sine wave, Triangular, TTL pulse 2. Frequency Ranges- 0.1 Hz to 11 MHz, up/down range switchable in eight decade steps 3. Dial Range-1 to 11 calibrated 0.1 to 1 uncalibrated 4. Pulse and Ramp Aspect Ratio-95:5

List any four types of transducer.

Description : List any four types of transducer.

Last Answer : Types of Transducer based on Quantity to be Measured Temperature transducers Pressure transducers Displacement transducers Flow transducers Types of Transducer based on the Principle of ... Whether an External Power Source is required or not Active Transducer Passive Transducer

Draw block diagram of spectrum analyser, State applications of spectrum analyser.

Description : Draw block diagram of spectrum analyser, State applications of spectrum analyser.

Last Answer : Block Diagram: Applications: 1. Spectrum analyzer is a very important item of test equipment for someone designing or repairing electronic equipment that uses radio frequency signals. 2. Its ... of the dominant frequency within a signal 8. Used to measure the properties of RF devices

Draw block diagram of DSO . State applications of DSO

Description : Draw block diagram of DSO . State applications of DSO

Last Answer : Applications of DSO : 1. It can be used to measure both AC and DC voltages and currents. It can also calculate RMS value, peak value, peak to peak value etc. 2. It ... . 5. It can be used to determine the modulation characteristics and detect the standing waves of transmission lines.

State applications of digital frequency meter.

Description : State applications of digital frequency meter.

Last Answer : 1. For testing radio equipment 2. Measuring the temperature, pressure, and other physical values. 3. Measuring vibration, strain 4. Measuring transducers

Write any two applications of Instrumentation System.

Description : Write any two applications of Instrumentation System.

Last Answer :  Instrumentation is used to measure many parameters (physical values). These parameters include: Pressure,either differential or static Flow Temperature Levels of liquids, etc. ... Inductance Capacitance Resistivity Chemical composition Chemical properties Position Vibration

Explain Piezo-electric transducer with diagram. State its applications, advantages and disadvantages.

Description : Explain Piezo-electric transducer with diagram. State its applications, advantages and disadvantages.

Last Answer : Explanation: Principle of operation: When a pressure or force or vibration applied to the crystalline material like quartz crystal or crystalline substances then an e.m.f. is generated across the ... destructive test (NDT) equipment's 4) Piezoelectric materials are use in ultrasonic transducers.

Draw the sketch of electromagnetic flow meter and explain it. State advantages, disadvantages and applications of it.

Description : Draw the sketch of electromagnetic flow meter and explain it. State advantages, disadvantages and applications of it.

Last Answer : Diagram:  Explanation: Electromagnetic flow meters works based on Faraday's Law of Electromagnetic Induction. According to this principle, when a conductive medium passes through a magnetic ... water, chilled water. Used for flow measurement of Corrosive liquids, slurries and pastes.

Give any two applications of LED and LCD each.

Description : Give any two applications of LED and LCD each. 

Last Answer : Two applications of LED (1) As an indicators and small display. (2) In digital thermometer, pulse rate meter. (3) In patient monitoring. Two applications of LCD (1) In video games (2) In calculators (3) In test equipments (4) In gauges and counters

Draw block diagram of function generator and list two specifications of it.

Description : Draw block diagram of function generator and list two specifications of it. 

Last Answer : Specifications: 1. Output- Square wave , sine wave, Triangular, TTL pulse 2. Frequency Ranges- 0.1 Hz to 11 MHz, up/down range switchable in eight decade steps 3. Dial Range-1 to 11 calibrated 0.1 to 1 uncalibrated 4. Pulse and Ramp Aspect Ratio-95:5

List the different types of errors and list out their sources.

Description : List the different types of errors and list out their sources.

Last Answer : 1. Static error : The error which occurs in stationary condition is called as static error. These are classified as: i. Gross errors: the errors which occur due to human mistakes while taking ... with time and value indicated by instrument if no static error is assumed is called as dynamic error.

List two advantages of PMMC instrument.

Description : List two advantages of PMMC instrument.

Last Answer : 1. It has uniform scale. 2. Power consumption is low 3. It can be obtained in wide ranges. 4. High sensitivity & accuracy 5. It is unaffected by external magnetic field. 6. Additional damping device not required. 7. Hysteresis problem is not there.

List different types of errors.

Description : List different types of errors.

Last Answer : There are three types of error 1) Gross Error: These errors are mainly human mistakes in reading instruments and recording and calculating measurement results. 2) Systematic Error : These types of ... operator . 3) Random Error.:These errors are due to unknown causes which are not determinable

Sketch block diagram of pattern generator and draw any four test patterns

Description : Sketch block diagram of pattern generator and draw any four test patterns

Last Answer :  Block Diagram of Pattern Generator: Test patterns of Pattern Generator:

State any four precautions to be taken while using an Ammeter and Voltmeter.

Description : State any four precautions to be taken while using an Ammeter and Voltmeter. 

Last Answer : Precautions to be taken while using Ammeters: Ammeters are to be connected in series of circuits. 1. While connecting ammeters across emf source always a series resistance should be used. This ... first &then range should be decreased. 4. Loading effect can be minimized by using high sensitivity

State any four specifications of digital voltmeter.

Description : State any four specifications of digital voltmeter. 

Last Answer : DC Voltage – 1 Five voltage ranges from ±200 to ±1000 2 Accuracy is about ±0.03% 3 Resolution is about 10µV AC Voltage1. Five voltage range available for 200mV to 750V 2. Accuracy is dependent on frequency. Best accuracy obtained is 0.5%

List any two applications of CRO.

Description : List any two applications of CRO.

Last Answer : Applications of CRO: 1) Measurement of phase and frequency. 2) Measurement of inductance and capacitance. 3) Tracing the waveform. 4) Determination of amplitude of variable quantity. 5) In ... in transmission lines 9) To check faulty components in various circuit 10) For tracing transistor curves

Draw block diagram of digital frequency meter in time mode and describe its operation.

Description : Draw block diagram of digital frequency meter in time mode and describe its operation.

Last Answer : OR Operation: The input signal is amplified and converted to a square wave by a Schmitt Trigger circuit. In this diagram the square wave is differentiated and clipped to ... thereby closing it. The decimal counter and display unit output correspond to the number of input pulses. 

Draw block diagram of DMM. State its advantages.

Description : Draw block diagram of DMM. State its advantages.

Last Answer : Advantages of DMM: 1. DMM provides numerical readouts that eliminate observational errors. Thus providing better readability. 2. DMM offers better accuracy and versatility as compared to ... memory devices for further computations. 5. The decreased size of DMM increases the portability

What is LCR meter? Draw digital LCR –Q meter block diagram.

Description : What is LCR meter? Draw digital LCR –Q meter block diagram.

Last Answer : An LCR meter is a type of electronic test equipment used to measure the inductance (L), capacitance (C), and resistance (R) of an electronic component. Block diagram digital LCR –Q meter  

Draw Q meter circuit of series connection and explain it.

Description : Draw Q meter circuit of series connection and explain it.

Last Answer : Q meter circuit of series connection OR Explanation The Q meter works on series resonant. The resonance is the condition exists in the circuit when their inductance and capacitance reactance are ... . Hence E=Q Ec so ,the voltmeter is calibrated for finding the value of Q factor.  

Draw block diagram of distortion factor meter and explain its operation.

Description : Draw block diagram of distortion factor meter and explain its operation.

Last Answer : Block Diagram Operation This meter consist following four sections 1. Impedance converter along with input circuit 2. Rejection amplifier 3. Metering circuit 4. Power circuit 1. ... of the total input voltage. 4. The power supply unit provides the supply for proper operation 

Define wave analyser and state its need, Draw the block diagram of it.

Description : Define wave analyser and state its need, Draw the block diagram of it. 

Last Answer : Wave analyzer:- Wave analyzer is an instrument which is used to measure the magnitude of the various harmonics of a complex waveform. It is an instrument that is designed to measure the relative amplitudes ... distortion and the system signal to noise ratio. Block Diagram of Wave analyser

Draw block diagram of RF signal generator and explain its operation.

Description : Draw block diagram of RF signal generator and explain its operation.

Last Answer : RF signal generator contains three other main sections: 1.OSCILLATOR CIRCUIT, 2. MODULATOR, 3. OUTPUT CONTROL CIRCUIT. The modulator modulates the RF signal of the ... . Metal shielding surrounds the unit to prevent signals from the oscillator from affecting the circuit under test

Draw and state how Aryton shunt type DC ammeter . State advantage of using Aryton shunt.

Description : Draw and state how Aryton shunt type DC ammeter . State advantage of using Aryton shunt.

Last Answer : OR The Aryton shunt eliminates the possibility of having the meter in the circuit without a shunt. This advantage is gained at the price of slightly higher overall Aryton shunt ammeter. In this ... between shunts. 3. Another advantage is that it may be used as a wide range ammeter. 

Explain sensitivity and loading effect in voltmeter.

Description : Explain sensitivity and loading effect in voltmeter.

Last Answer : Sensitivity: The sensitivity of a voltmeter is just its capability to detect voltage, usually meaning smaller and smaller voltages. When selecting a meter for a certain voltage measurement, it is ... called loading effect of the voltmeters. It is mainly caused due to low sensitivity instruments.

What is video pattern generator? State its application.

Description : What is video pattern generator? State its application.

Last Answer : A pattern generator provides video signals directly, and with RF modulation, on standard TV channels for alignment ,testing and servicing of TV receivers. The output signal designed to produce simple ... section checking 6. Trouble shooting video amplifier and using variable video output.

Derive the relation for deflection torque in PMMC instrument.

Description : Derive the relation for deflection torque in PMMC instrument. 

Last Answer : Ans: The length of coil be l meter and width of coil be d meter. Assume I is the current flowing in the ciol having N turns. Assume B as the flux density in the air gap then F=BIL ... a direct indication of the current in the coil. The pointer deflection can therefore be used to measure current.

Draw the construction and explain working principle of PMMC instruments

Description : Draw the construction and explain working principle of PMMC instruments

Last Answer : Working: When current passes through the coil a deflecting torque is produced. This deflecting torque is produced due to interaction between magnetic field produced by permanent magnet ... equilibrium; this is possible only when the controlling torque becomes equal to the deflecting torque 

Define the following: 1) Speed of response 2) Lag 3) Fidelity 4) Dynamic Error.

Description : Define the following: 1) Speed of response 2) Lag 3) Fidelity 4) Dynamic Error. 

Last Answer : (1) Speed of Response: It is the rapidity with which an instrument responds to changes in the measured quantity.  (2) Lag : It is the retardation or delay in the response of an instrument ... with time and value indicated by instrument if no static error is assumed is called as dynamic error.