State any four applications of spectrum analyzer.

State any four applications of spectrum analyzer.
by

1 Answer

Answer :

Applications:

1. Spectrum analyzer is a very important item of test equipment for someone designing or repairing electronic equipment that uses radio frequency signals.

2. Its key factor is that it is able to look at signals in the frequency domain

3. Spectrum analyzer generally is used to measure spectral purity of multiplex signals.

4. It also measure percentage of modulation of AM signals, and modulation characteristics of fm and pulse-modulated signals.

5. The spectrum analyzer is also used to interpret the displayed spectra of pulsed RF emitted from a radar transmitter.

6. Use for accurate total power measurements

7. Used to provide very accurate measurements of the dominant frequency within a signal

8. Used to measure the properties of RF devices
by

Related questions

Describe block diagram of spectrum analyzer and explain its working

Description : Describe block diagram of spectrum analyzer and explain its working

Last Answer : Fig: Block Diagram of Spectrum analyzer. 1. Spectrum analyzer consists of voltage tune oscillator, mixer, IF amplifier, detector, video amplifier, sweep generator and CRT. 2. The input ... on the screen. 8. In this type the signal are broken down into their individual frequency component.

Draw block diagram of spectrum analyser, State applications of spectrum analyser.

Description : Draw block diagram of spectrum analyser, State applications of spectrum analyser.

Last Answer : Block Diagram: Applications: 1. Spectrum analyzer is a very important item of test equipment for someone designing or repairing electronic equipment that uses radio frequency signals. 2. Its ... of the dominant frequency within a signal 8. Used to measure the properties of RF devices

Explain function of each block of logic analyzer with proper block diagram

Description : Explain function of each block of logic analyzer with proper block diagram

Last Answer : Explanation: A logic analyser is an electronic instrument that captures and displays multiple signals from a digital system or digital circuit. The normal oscilloscope deals with time domain, spectrum ... When the memory receives a trigger signal, it sends the samples to a CRT display.  

List four applications of CRO.

Description : List four applications of CRO.

Last Answer : Applications of CRO: 1. It is used in laboratory for measurement of AC/DC voltage, current, frequency, phase and study nature of waveform. 2. It is used in TV receiver for creation of ... modulation percentage of modulated wave. 10. It is also used to check radiation pattern generated by antenna.

List four applications of digital multimeter.

Description : List four applications of digital multimeter.

Last Answer : Applications : 1. It is used continuity test. 2. It is used to check diode 3. It is used to check transistor 4. It is used to measure voltage, current & resistance.

Draw block diagram of DSO . State applications of DSO

Description : Draw block diagram of DSO . State applications of DSO

Last Answer : Applications of DSO : 1. It can be used to measure both AC and DC voltages and currents. It can also calculate RMS value, peak value, peak to peak value etc. 2. It ... . 5. It can be used to determine the modulation characteristics and detect the standing waves of transmission lines.

State applications of digital frequency meter.

Description : State applications of digital frequency meter.

Last Answer : 1. For testing radio equipment 2. Measuring the temperature, pressure, and other physical values. 3. Measuring vibration, strain 4. Measuring transducers

Explain Piezo-electric transducer with diagram. State its applications, advantages and disadvantages.

Description : Explain Piezo-electric transducer with diagram. State its applications, advantages and disadvantages.

Last Answer : Explanation: Principle of operation: When a pressure or force or vibration applied to the crystalline material like quartz crystal or crystalline substances then an e.m.f. is generated across the ... destructive test (NDT) equipment's 4) Piezoelectric materials are use in ultrasonic transducers.

Draw the sketch of electromagnetic flow meter and explain it. State advantages, disadvantages and applications of it.

Description : Draw the sketch of electromagnetic flow meter and explain it. State advantages, disadvantages and applications of it.

Last Answer : Diagram:  Explanation: Electromagnetic flow meters works based on Faraday's Law of Electromagnetic Induction. According to this principle, when a conductive medium passes through a magnetic ... water, chilled water. Used for flow measurement of Corrosive liquids, slurries and pastes.

List applications of ohmmeter.

Description : List applications of ohmmeter.

Last Answer : 1. The ohmmeter is a meter for measuring electrical resistance in ohm. 2. It is used as Megger to measure high resistance. 3. It is used to test the power circuits.

Write any two applications of Instrumentation System.

Description : Write any two applications of Instrumentation System.

Last Answer :  Instrumentation is used to measure many parameters (physical values). These parameters include: Pressure,either differential or static Flow Temperature Levels of liquids, etc. ... Inductance Capacitance Resistivity Chemical composition Chemical properties Position Vibration

List the applications of DAS.

Description : List the applications of DAS. 

Last Answer : Applications of DAS: (I) In Aerospace (II) In biomedical (III) Telemetry industries (IV) When physical quantity being monitored

Give any two applications of LED and LCD each.

Description : Give any two applications of LED and LCD each. 

Last Answer : Two applications of LED (1) As an indicators and small display. (2) In digital thermometer, pulse rate meter. (3) In patient monitoring. Two applications of LCD (1) In video games (2) In calculators (3) In test equipments (4) In gauges and counters

State any four precautions to be taken while using an Ammeter and Voltmeter.

Description : State any four precautions to be taken while using an Ammeter and Voltmeter. 

Last Answer : Precautions to be taken while using Ammeters: Ammeters are to be connected in series of circuits. 1. While connecting ammeters across emf source always a series resistance should be used. This ... first &then range should be decreased. 4. Loading effect can be minimized by using high sensitivity

State any four specifications of digital voltmeter.

Description : State any four specifications of digital voltmeter. 

Last Answer : DC Voltage – 1 Five voltage ranges from ±200 to ±1000 2 Accuracy is about ±0.03% 3 Resolution is about 10µV AC Voltage1. Five voltage range available for 200mV to 750V 2. Accuracy is dependent on frequency. Best accuracy obtained is 0.5%

Sketch block diagram of pattern generator and draw any four test patterns

Description : Sketch block diagram of pattern generator and draw any four test patterns

Last Answer :  Block Diagram of Pattern Generator: Test patterns of Pattern Generator:

List four dynamic characteristics of instruments. Define any two of them.

Description : List four dynamic characteristics of instruments. Define any two of them.

Last Answer : Dynamic characteristics of instruments are: 1. Speed of response 2. Fidelity 3. Lag 4. Dynamic error. Definition: 1. Speed of response: The rapidity with which instrument responds to make ... and the value indicated by the instrument if no static error is assumed is called as dynamic error.

Give any four points of comparison between dual trace CRO & dual beam CRO.

Description : Give any four points of comparison between dual trace CRO & dual beam CRO.

Last Answer : Sr.N o Single Beam Dual Trace CRO Dual Beam Dual Trace CRO 1 A single electron beam is used to display two traces.  Two electron beams are used for displaying two traces/signals. ... two traces is very simple in Dual Beam oscilloscope. 6 Cost is less  Cost is high

List four specifications of function generator.

Description : List four specifications of function generator. 

Last Answer : Specifications: 1. Output- Square wave , sine wave, Triangular, TTL pulse 2. Frequency Ranges- 0.1 Hz to 11 MHz, up/down range switchable in eight decade steps 3. Dial Range-1 to 11 calibrated 0.1 to 1 uncalibrated 4. Pulse and Ramp Aspect Ratio-95:5

List four controls on front panel of dual trace CRO.

Description : List four controls on front panel of dual trace CRO. 

Last Answer : (i)X-shift on CRO: Controls the horizontal position of the display i.e moves the spot across the screen left and right. ii) CT MODE Button on CRO: To test different components iii) Symmetry knob on ... Button on CRO: In DUAL, operates as a DUAL trace scope in ALT or CHOP mode as selected.

List any four types of transducer.

Description : List any four types of transducer.

Last Answer : Types of Transducer based on Quantity to be Measured Temperature transducers Pressure transducers Displacement transducers Flow transducers Types of Transducer based on the Principle of ... Whether an External Power Source is required or not Active Transducer Passive Transducer

Which tester is used to measure SWR? A. Spectrum analyzer B. Multimeter C. Reflectometer D. Oscilloscope

Description : Which tester is used to measure SWR? A. Spectrum analyzer B. Multimeter C. Reflectometer D. Oscilloscope

Last Answer : C. Reflectometer

In FFT Spectrum Analyzer, FFT stands for _______. (A) Frequency Fourier Transform (B) Fast Fourier Transmission (C) Frequency Fourier Transmission (D) Fast Fourier Transform

Description : In FFT Spectrum Analyzer, FFT stands for _______. (A) Frequency Fourier Transform (B) Fast Fourier Transmission (C) Frequency Fourier Transmission (D) Fast Fourier Transform

Last Answer : (D) Fast Fourier Transform

The display screen of a spectrum analyzer presents a graphic plot of what two signal characteristics?

Description : The display screen of a spectrum analyzer presents a graphic plot of what two signal characteristics?

Last Answer : Power and frequency.

A spectrum analyzer is designed to display what signal characteristic?

Description : A spectrum analyzer is designed to display what signal characteristic?

Last Answer : Amplitude versus frequency (the frequency domain of the signals).

Indications of spectrum analyzer is presented by means of

Description : Indications of spectrum analyzer is presented by means of

Last Answer : a CRT

Used to test a fiber optics splice ∙ a. Spectrum analyzer ∙ b. Oscilloscope ∙ c. Optical power meter ∙ d. Field strength meter

Description : Used to test a fiber optics splice ∙ a. Spectrum analyzer ∙ b. Oscilloscope ∙ c. Optical power meter ∙ d. Field strength meter

Last Answer : c. Optical power meter

Spectrum analyzer

Description : Spectrum analyzer

Last Answer : Spectrum analyzer Spectrum analyzer is use for measuring signal in frequency domain. It measure modulation, distortion and noise. Spectrum analyzer measure the electrical input signal, for measuring ... of the signal. Other control include dynamic range, sweep speed and resolution bandwidth.

Draw block diagram of DMM. State its advantages.

Description : Draw block diagram of DMM. State its advantages.

Last Answer : Advantages of DMM: 1. DMM provides numerical readouts that eliminate observational errors. Thus providing better readability. 2. DMM offers better accuracy and versatility as compared to ... memory devices for further computations. 5. The decreased size of DMM increases the portability

Define wave analyser and state its need, Draw the block diagram of it.

Description : Define wave analyser and state its need, Draw the block diagram of it. 

Last Answer : Wave analyzer:- Wave analyzer is an instrument which is used to measure the magnitude of the various harmonics of a complex waveform. It is an instrument that is designed to measure the relative amplitudes ... distortion and the system signal to noise ratio. Block Diagram of Wave analyser

State and describe different triggering available in CRO

Description : State and describe different triggering available in CRO

Last Answer : A trigger is an external signal or input signal condition that initiates one or more instrument functions. Trigger settings include digital edges, software functions, and analog levels. This tutorial ... the external trigger input. The following figure shows an entering window trigger.  

Draw and state how Aryton shunt type DC ammeter . State advantage of using Aryton shunt.

Description : Draw and state how Aryton shunt type DC ammeter . State advantage of using Aryton shunt.

Last Answer : OR The Aryton shunt eliminates the possibility of having the meter in the circuit without a shunt. This advantage is gained at the price of slightly higher overall Aryton shunt ammeter. In this ... between shunts. 3. Another advantage is that it may be used as a wide range ammeter. 

What is video pattern generator? State its application.

Description : What is video pattern generator? State its application.

Last Answer : A pattern generator provides video signals directly, and with RF modulation, on standard TV channels for alignment ,testing and servicing of TV receivers. The output signal designed to produce simple ... section checking 6. Trouble shooting video amplifier and using variable video output.

Define standards. State and explain classification of standards.

Description : Define standards. State and explain classification of standards.

Last Answer : Standards:-Standard is a physical representation of a unit of measurement. A known accurate measure of physical quantity is termed as standard. These standards are used to determine ... used to check components and calibrating laboratory instruments to achieve good accuracy and better performance.

State two uses of logic analyser.

Description : State two uses of logic analyser. 

Last Answer : 1. Real time application 2. Troubleshooting and analysis of digital systems 3. Compatible with printer using RS 232 and IEEE 488 interface 4. Testing the IC s to detect defect before constructed. ... Industries. 7. In various software industries. 8. To find fault in Bio- medical instruments. 

Define signal generator and state its need.

Description : Define signal generator and state its need.

Last Answer : Signal Generator: A signal generator is an electronic device that generates repeating or Non-repeating electronic signals in either the analog or the digital domain. Need: The generation of ... of various electronic systems and for replacing missing signals in systems being analysed for repair. 

State the difference between CRO and DSO.

Description : State the difference between CRO and DSO.

Last Answer : CRO DSO Direcly reads analog voltage and displays it on screen. It reads the analog voltage and converts it into digital form before being displayed on the screen. ... DSP algorithms available and ported on microprocessor which can operate on stored samples of input voltage. 

State the advantages of Digital instrument.

Description : State the advantages of Digital instrument.

Last Answer : 1. They are having high input impedance, so there is no loading effect 2. They are having higher accuracy 3. An unambiguous reading is obtained 4. The output can be interfaced with external equipment 5. They are available in smaller size

Draw block diagram of successive approximation digital voltmeter. State its two advantages and two disadvantages

Description : Draw block diagram of successive approximation digital voltmeter. State its two advantages and two disadvantages

Last Answer : Block diagram Or Advantages: o It is economical method of analog to digital conversion. o The resolution is up to 5 important digits are obtained. Disadvantages: o ... depends on which type of switches are used. o The conversion time required for digital to analog converter.

Draw block diagram of frequency meter and state it’s principle of operation

Description : Draw block diagram of frequency meter and state it’s principle of operation

Last Answer : Block diagram Principle  The signal may be amplified before being applied to the Schmitt trigger. The Schmitt trigger converts the input signal into a square wave with fast rise and fall times, ... time interval between start and stop gate then, frequency of unknown signalis, f = N / t

State significance of ½ digit with an example

Description : State significance of ½ digit with an example

Last Answer : The number of digit position in a digital meter determine the resolution. ½ digit has a maximum value of 1 and has 2 possible conditions (0 or 1). Hence 3 digit display on a DVM for a 0 -1 ... above 999 up to 1999, to give overlap between ranges for convenience, a process called over ranging. 

Draw the diagram of PMMC instrument and state the deflection torque equation

Description : Draw the diagram of PMMC instrument and state the deflection torque equation

Last Answer : Equation Ʈ= B*A*I*N Where r= torque Newton. Meter B = flux density in the air gap. Wb/m2 A = effective coil area (m) N= number of turns of wire of the coil

Sketch block diagram of single trace CRO. State function of delay line.

Description : Sketch block diagram of single trace CRO. State function of delay line.

Last Answer : Function of Delay line: This block is used to delay the signal for a period of time in the vertical section of CRT. The input signal is not applied directly to the vertical plates because the part ... when the delay time is not used. Therefore, the input signal is delayed by a period of time.

Define the term standards ,state the type of standard.

Description : Define the term standards ,state the type of standard. 

Last Answer : Standards:-Standard is a physical representation of a unit of measurement. A known accurate measure of physical quantity is termed as standard. These standards are used to determine the ... check components and calibrating laboratory instruments to achieve good accuracy and better performance.  

State need of delay line in CRO.

Description : State need of delay line in CRO. 

Last Answer : The delay line is used in CRO to delay the signal for some time in thevertical sections. As horizontal channel consists of trigger circuit andtime based generator. This causes more time to reach ... vertical plates. For synchronization of reachinginput signal at same time to both the plates in CRT. 

State different types of errors in Instruments.

Description : State different types of errors in Instruments.

Last Answer : There are three types of error 1) Gross Error: These errors are mainly human mistakes in reading instruments and recording and calculating measurement results. 2) Systematic Error : These types of ... operator 3) Random Error.:These errors are due to unknown causes which are not determinable.

State the meaning of PT-100.

Description : State the meaning of PT-100.

Last Answer : Pt-100:- A platinum resistance temperature detector (RTD) Pt100 is a device with a typical resistance of 100 Ω at 0°C (it is called Pt100). It changes resistance value as its temperature changes following a positive slope (resistance increases when temperature is increasing). 

Compare CRO and DSO. State the formula for phase measurement using CRO with necessary diagram.

Description : Compare CRO and DSO. State the formula for phase measurement using CRO with necessary diagram.

Last Answer : CRO DSO Directly reads analog voltage and displays it on screen. It reads the analog voltage and converts it into digital form before being displayed on the screen. ... algorithms available and ported on microprocessor which can operate on stored samples of input voltage.

State need of level measurement.

Description : State need of level measurement.

Last Answer : In almost all industries, vast quantities of liquid such as water solvents, chemicals etc. are used in number of processes. It is widely employed to monitor as well as measure ... and therefore its measurement becomes important in a variety of processes encountered in modern manufacturing plants.

State significance of Lissajous figure.

Description : State significance of Lissajous figure. 

Last Answer : Significance of Lissajous figure. The characteristics patterns that appear on the screen of a cathode ray tube, when sinusoidal voltages are simultaneously applied to horizontal and vertical plates .these ... is presented as a Lissajous figure. it is used for measurement of phase and frequency.