Noise Pollution is measured in a) Hertz b) Fathoms c) Manometers d) Decibels. 

1 Answer

Answer :

d) Decibels.

Related questions

Description : As per international norms, the maximum permissible value of noise level in the industrial environment is __________ decibels as measured at a distance of 1.5 metres from the source of noise. (A) 110 (B) 85 (C) 60 (D) 45

Last Answer : (B) 85

Description : Anxiety and stress are caused by a) Air pollution b) Noise pollution c) Water pollution d) Nuclear pollution

Last Answer : b) Noise pollution

Description : Sound becomes hazardous noise pollution at level a) Above 30 dB b) Above 80 dB c) Above 100 dB d) Above 120 dB.

Last Answer : b) Above 80 dB

Description : Noise pollution level in a chemical plant is expressed in (A) Roentgen (B) Decibel (C) Hertz (D) None of these

Last Answer : (B) Decibel

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

Description : What bandwidth is needed to support a capacity of 128 kbps when the signal power to noise power ratio in decibels is 100? A. 19224 Hz B. 3853 Hz C. 19244 Hz D. 3583 Hz

Last Answer : B. 3853 Hz

Description : Ambient noise level can be reduced by __________ decibels by planting trees (like coconut, neem etc.) near public utility buildings (like hospitals & schools). (A) 1-2 (B) 5-10 (C) 15-20 (D) 25-30

Last Answer : (B) 5-10

Description : Noise emitted by a ventilation fan at a distance of 3 metres is about __________ decibels. (A) 85 (B) 105 (C) 125 (D) 145

Last Answer : (B) 105

Description : Noise level heard at a distance of about 100 metres from a jet engine with after burner is about __________ decibels. (A) 120 (B) 140 (C) 170 (D) 200

Last Answer : (C) 170

Description : Noise level during normal conversation among men is about __________ decibels. (A) 10 (B) 45 (C) 90 (D) 115

Last Answer : (B) 45

Description : Maximum permissible limit of industrial noise as recommended by World Health Organisation (WHO) is __________ decibels. (A) 35 (B) 75 (C) 95 (D) 105

Last Answer : (B) 75

Description : Noise level heard inside a bus in busy city traffic or inside a sub-way train corresponds to about __________ decibels. (A) 75 (B) 95 (C) 120 (D) 140

Last Answer : (B) 95

Description : Maximum allowable noise exposure limits for a man working for 8 hours a day in a noisy chemical plant is about __________ decibels. (A) 20 (B) 60 (C) 90 (D) 120

Last Answer : (C) 90

Description : Major sources of noise in furnace operation arises from air inspirators, combustion, side wall vibrations and fluctuation in the process heat load. A 50% increase in fuel firing rate may increase the furnace noise level by about __________ decibels. (A) 3 (B) 30 (C) 7 (D) 70

Last Answer : (A) 3

Description : The maximum permissible noise level to which a man working in a chemical plant can be exposed for eight hours per day is about __________ decibels. (A) 60 (B) 90 (C) 105 (D) 120

Last Answer : (B) 90

Description : Noise level in a quiet private business office is about __________ decibels. (A) 25 (B) 50 (C) 70 (D) 85

Last Answer : (B) 50

Description : . Noise level inside a jet airliner in normal flight is about __________ decibels. (A) 80 (B) 100 (C) 125 (D) 150

Last Answer : (B) 100

Description : Noise level audible to audience sitting in the 5th row from the stage during a large orchestra show corresponds to about __________ decibels. (A) 105 (B) 135 (C) 160 (D) 185

Last Answer : (B) 135

Description : The noise pollution is measured in:

Last Answer : The noise pollution is measured in: A. hertz B. fathoms C. nanometers D. decibles

Description : a fathom is a unit of length. The ratio af fathoms to feet is 1:6.The ratio of feet to yards is 3:1. How many fathoms are equivalent to an oblect that is 4 yards in length?

Last Answer : help me places

Description : Pick up the correct statement from the following: (A) For nautical purposes, low water level is generally referred to by the navigators (B) The depth of the bed of the sea from the surface of water is ... (C) The contour lines on the bed of a water body are called fathoms (D) All the above

Last Answer : (D) All the above

Description : Increasing high skin cancer and high mutation rate are a) O3 depletion b) Acid rain c) CO pollution d) CO2 Pollution.

Last Answer : a) O3 depletion

Description : Thermal pollution is more common near a) Hot water springs b) Coal based power plants c) Tropical regions d) Temperate regions. 

Last Answer : b) Coal based power plants 

Description : SO2 pollution causes a) Plasmolysis b) Destruction of cell wall c) Destruction of Golgi bodies

Last Answer : c) Destruction of Golgi bodies

Description : Air pollution effects are usually found on a) Flowers b) Leaves c) Stems d) Roots.

Last Answer : b) Leaves

Description : Lichens indicate pollution by a) O3 b) SO2 c) NO2 d) CO.

Last Answer : b) SO2

Description : Spraying of DDT produces pollution of a) Air b) Air and Water c) Air and Soil d) Air, Water and Soil. 

Last Answer : d) Air, Water and Soil.

Description : SO2 and NO2 Produce pollution by increasing a) Alkalinity b) Acidity c) Neutrality d) Buffer action.

Last Answer : b) Acidity

Description : Select the correct statement: (1) Lenticel is the exit route for transpiration (2) The action spectra of transpiration is blue and red (3) Transpiration helps the plant to remain cool (4) Transpiration can be measured by photometer

Last Answer : Ans. ((c))

Description : Soil salinity is measured by: (a) Potometer (b) Porometer (c) Conductivity meter (d) Calorimeter

Last Answer : Ans. ((c))

Description : The unit of measurement of noise is – (1) Decibel (2) Hertz (3) Amplifier (4) Acoustics

Last Answer : (1) Decibel Explanation: The decibel (dB) is the unit used to measure the intensity of sound or noise level. It is given in terms of a logarithmic function of a ratio of power intensities. One ... one bel, named in honor of Alexander Graham Bell who was the inventor of the telephone and phonograph.

Description : Which of the following refers to theterms "residual error rate"? A. the number of biterrors per twenty four hours of continuous operation onanasynchronous line B. The probability that one or moreerrors ... tonoise ratio dividedby the ratio of energy perbit to noise per hertz E. None of the above

Last Answer : The probability that one or moreerrors will be undetected whenan error detection scheme is used

Description : The unit of measurement of noise is (1) Decibel (2) Hertz (3) Amplifier (4) Acoustics

Last Answer : Decibel

Description : Manometers measure the __________ pressure. (A) Vacuum as well as the atmospheric (B) Difference in (C) Absolute (D) Gage

Last Answer : (B) Difference in

Description : Correction for capillary effect in manometers (used for pressure measurement) need not be applied, if diameter of the manometer tube is __________ mm. (A) < 4 (B) > 4 (C) > 12.5 (D) < 10

Last Answer : (C) > 12.5

Description : The liquid used in manometers should have (A) Low density (B) High density (C) Low surface tension (D) High surface tension

Last Answer : Answer: Option D

Description : Alcohol is used in manometers because (A) It has low vapour pressure (B) It is clearly visible (C) It has low surface tension (D) It can provide longer column due to low density

Last Answer : Answer: Option D

Description : The refresh rate of monitor is measured in _______ A. byte B. seconds C. Hertz D. None of the Above

Last Answer : C. Hertz

Description : Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Last Answer : Answers: (i) Force (ii) Work Energy (iii) Power of electricity (iv) Potential difference (v) Distance of stars and planets (vi) Length (vii) Volume (viii) Radioactivity (ix) Frequency (x) Rate of flow of water

Description : Pick up the correct statement from the following: (A) Frequency is the number of wave crests passing a fixed point in one second (B) Frequency of a wave is measured in Hertz (Hz) (C) Amplitude of a wave is the height of its crust from the mid-point (D) All of these

Last Answer : Answer: Option D

Description : Processor’s speed of a computer is measured in (1) BPS (2) MIPS (3) Baud (4) Hertz

Last Answer : Million instructions per second (MIPS)

Description : Conductance is measured in: A. Henries B. Mhos C. Hertz D. Watts

Last Answer : Conductance is measured in: Mhos

Description : How loud is 93 decibels?

Last Answer : answer:Here’s a comparison chart. http://www.controlnoise.com/decibel-chart/ At 90 and above the chart says “sustained exposure may cause hearing loss.” (I goggled this. it was easy to find.)

Description : How many decibels can the human ear bear?

Last Answer : The noise around us usually ranges from 20 / whispering / to 120 / aircraft start / decibels. It can be a little different for each individual. For sound above 120, the sound may start to hurt.

Description : What are decibels a measure of?

Last Answer : Decibel is a measure of the ratio of the strength of twosignals, or two sound levels. It may also refers to the loudness ofONE sound, or the strength of ONE signal, with respect to astandard reference level.It is a logarithmic measure.

Description : What does fifty decibels sound like?

Last Answer : A decibel is a measure of how loud a sound (any sound) is. 50 dBis about the sound level of gentle rainfall. Louder than a quietroom, softer than a quiet conversation. Not as loud as the dialtone on a telephone.

Description : The standard audible capacity of a healthy human being as per World Health Organi-sation is in the range of - (1) 45-50 decibels (2) 200-250 decibels (3) 5-10 decibels (4) 2000-2500 decibels

Last Answer : (3) 5-10 decibels Explanation: Hearing range usually describes the range of frequencies that can be heard by an animal or human, though it can also refer to the range of levels. In humans the audible ... as low as 12 Hz under ideal laboratory conditions, to 20 kHz in most children and some adults.

Description : Human beings can hear the sound range between: (1) 10 to 20 decibels (2) 100 to 150 decibels (3) 50 to 60 decibels (4) None of the above

Last Answer : (4) None of the above Explanation: The most accepted sound range of human being is 0 to 120 decibels.

Description : Sound produced by an automobile horn heard at a distance of 1.5 metres corresponds to about __________ decibels. (A) 90 (B) 120 (C) 150 (D) 180

Last Answer : (B) 120

Description : Shouting by a man at his full voice corresponds to a voice level of about __________ decibels. (A) 25 (B) 50 (C) 80 (D) 120

Last Answer : (C) 80