For every 4°C raise in air inlet temperature of an air compressor, the power consumption will increases by_____ a) 2% b) 1% c) 3% d) 4%

For every 4°C raise in air inlet temperature of an air compressor, the power consumption will increases by_____ a) 2% b) 1% c) 3% d) 4%
by

1 Answer

Answer :

b) 1%
by

Related questions

Identify the correct statement for air compressors. a. For every 5.5oC drop in the inlet air temperature, the increase in energy consumption is by 2%. b. For every 4 oC rise in the inlet air temperature, the decrease in energy consumption is by 1% c. For every 4 oC rise in the inter air temperature, the increase in energy consumption is by 1% d. The energy consumption remains same irrespective of inlet air temperature

Description : Identify the correct statement for air compressors. a. For every 5.5oC drop in the inlet air temperature, the increase in energy consumption is by 2%. b. For every 4 oC rise in ... increase in energy consumption is by 1% d. The energy consumption remains same irrespective of inlet air temperature 

Last Answer : c. For every 4 oC rise in the inter air temperature, the increase in energy consumption is by 1% 

The percentage increase in power consumption of a compressor with suction side air filter and with the pressure drop across the filter of 200 mmWc is ____ a) 1.0% b) 3% c) 2.4% d) 1.6%

Description : The percentage increase in power consumption of a compressor with suction side air filter and with the pressure drop across the filter of 200 mmWc is ____ a) 1.0% b) 3% c) 2.4% d) 1.6% 

Last Answer : d) 1.6%

Can you explain how temperature of inlet air affects the energy consumption of an air compressor?

Description : Can you explain how temperature of inlet air affects the energy consumption of an air compressor?

Last Answer : As a thumb rule “for every 4 °C rise in inlet air temperature results in a higher energy consumption by 1% to achieve equivalent output”. Hence cool air intake leads to a more efficient compression.

Which of the statement is “True” for centrifugal compressors? a) The compressor should not be operated at full load b) The compressor should be operated at shut off pressure c) The compressor should not be operated with inlet-guide vane control d) The compressor should not be operated close to the surge point

Description : Which of the statement is True for centrifugal compressors? a) The compressor should not be operated at full load b) The compressor should be operated at shut off pressure c) The ... operated with inlet-guide vane control d) The compressor should not be operated close to the surge point 

Last Answer : d) The compressor should not be operated close to the surge point

Reduction in the delivery pressure of a Compressor working at 7 bar, by 1 bar would reduce the power consumption by a) 6 to 10 % b) 2 to 3 % c) 12 to 14 % d) None of the above

Description : Reduction in the delivery pressure of a Compressor working at 7 bar, by 1 bar would reduce the power consumption by a) 6 to 10 % b) 2 to 3 % c) 12 to 14 % d) None of the above

Last Answer : a) 6 to 10 %

The specific power consumption of non lubricated compressor compared to lubricated type is ____ a) Lesser b) Same c) Higher d) None

Description : The specific power consumption of non lubricated compressor compared to lubricated type is ____ a) Lesser b) Same c) Higher d) None 

Last Answer : c) Higher

In an experiment, the percentage of error occurred in the measurement of physical quantities A, B, C and D are 1%, 2%, 3% and 4% respectively.

Description : In an experiment, the percentage of error occurred in the measurement of physical quantities A, B, C and D are 1%, 2%, 3% and 4% respectively.

Last Answer : In an experiment, the percentage of error occurred in the measurement of physical quantities A, B, C and D are 1%, 2%, ... % (C) (3/13) % (D) 16 %

What percentage of the cell is made up of carbohydrates a. 1% b. 2% c. 3% d. 4%

Description : What percentage of the cell is made up of carbohydrates a. 1% b. 2% c. 3% d. 4%

Last Answer : 1%

According to World Bank Estimate, direct losses from natural disasters are upto percent of GDP? a. 4% b. 2% c. 1% d. 3%

Description : According to World Bank Estimate, direct losses from natural disasters are upto percent of GDP? a. 4% b. 2% c. 1% d. 3%

Last Answer : b. 2%

39. India is one of the twelve “Mega diversity countries” in the world due to ... e) Having 2.5% of the land area and 8.2% global species diversity. f) Having 2.4% of the land area and 8.1% global species diversity. g) Having 2.6% of the land area and 8.3% global species diversity. h) Having 2.4% of the land area and 8.2% global species diversity.

Description : 39. India is one of the twelve Mega diversity countries in the world due to ... e) Having 2.5% of the land area and 8.2% global species diversity. f) Having 2.4% of the land area and 8. ... area and 8.3% global species diversity. h) Having 2.4% of the land area and 8.2% global species diversity.

Last Answer : f) Having 2.4% of the land area and 8.1% global species diversity.

19. India is one of the twelve “Mega diversity countries” in the world due to ... a) Having 2.5% of the land area and 8.2% global species diversity. b) Having 2.4% of the land area and 8.1% global species diversity. c) Having 2.6% of the land area and 8.3% global species diversity. d) Having 2.4% of the land area and 8.2% global species diversity.

Description : 19. India is one of the twelve Mega diversity countries in the world due to ... a) Having 2.5% of the land area and 8.2% global species diversity. b) Having 2.4% of the land area and 8.1% ... area and 8.3% global species diversity. d) Having 2.4% of the land area and 8.2% global species diversity.

Last Answer : b) Having 2.4% of the land area and 8.1% global species diversity.

From base load operation and from achieving best specific energy consumption point of view, which of the following compressors are suitable? a) Single stage reciprocating compressors b) Centrifugal compressors c) Two stage reciprocating compressor d) Multi stage reciprocating compressor

Description : From base load operation and from achieving best specific energy consumption point of view, which of the following compressors are suitable? a) Single stage reciprocating compressors b) Centrifugal compressors c) Two stage reciprocating compressor d) Multi stage reciprocating compressor

Last Answer : b) Centrifugal compressors

From the point of lower specific energy consumption, which of the following compressors are suitable for part load operation? a) Two stage reciprocating compressors b) Centrifugal compressors c) Two stage screw compressor d) Single stage screw compressor

Description : From the point of lower specific energy consumption, which of the following compressors are suitable for part load operation? a) Two stage reciprocating compressors b) Centrifugal compressors c) Two stage screw compressor d) Single stage screw compressor

Last Answer : a) Two stage reciprocating compressors

The basic function of air dryer in a compressor is: a. prevent dust from entering compressor b. storage and smoothening pulsating air output c. reduce the temperature of the air before it enters the next state to increase efficiency d. to remove remaining traces of moisture after after-cooler

Description : The basic function of air dryer in a compressor is: a. prevent dust from entering compressor b. storage and smoothening pulsating air output c. reduce the temperature of the air before it enters the next state to increase efficiency d. to remove remaining traces of moisture after after-cooler 

Last Answer : d. to remove remaining traces of moisture after after-cooler 

The volumetric efficiency of the compressor ______ with the increase in altitude of place a) increases b) decreases c) does not change d) None

Description : The volumetric efficiency of the compressor ______ with the increase in altitude of place a) increases b) decreases c) does not change d) None

Last Answer : b) decreases

Explain about the air compressor modulation by optimal pressure settings.

Description : Explain about the air compressor modulation by optimal pressure settings. 

Last Answer : Very often in an industry, different types, capacities and makes of compressors are connected to a common distribution network. In such situations, proper selection of a right combination of compressors and ... different pressures and energy efficient ones must be made to meet most of the demand. 

What are the different types of pressure regulators available for air compressor system?

Description : What are the different types of pressure regulators available for air compressor system? 

Last Answer : Pilot operated type Direct acting type Self – relieving type 

If the compressor of 200 cfm loads in 10 seconds and unloads in 20 seconds, the air leakage would be_____ a) 67 cfm b) 100 cfm c) 10 cfm d) 133 cfm

Description : If the compressor of 200 cfm loads in 10 seconds and unloads in 20 seconds, the air leakage would be_____ a) 67 cfm b) 100 cfm c) 10 cfm d) 133 cfm 

Last Answer : a) 67 cfm

The discharge temperature of two stage compressor compared to single stage one is ____ a) Lesser b) Same c) Higher d) None

Description : The discharge temperature of two stage compressor compared to single stage one is ____ a) Lesser b) Same c) Higher d) None  

Last Answer : a) Lesser

Which of the following parameters are not required for evaluating volumetric efficiency of the compressor? a) Power b) Cylinder bore diameter c) Stroke length d) FAD

Description : Which of the following parameters are not required for evaluating volumetric efficiency of the compressor? a) Power b) Cylinder bore diameter c) Stroke length d) FAD

Last Answer : a) Power

The ratio of isothermal power to actual measured input power of a compressor is known as: a) Isothermal efficiency b) Volumetric Efficiency c) Barometric efficiency d) None

Description : The ratio of isothermal power to actual measured input power of a compressor is known as: a) Isothermal efficiency b) Volumetric Efficiency c) Barometric efficiency d) None 

Last Answer : a) Isothermal efficiency

What are the limitations of a centrifugal compressor operation?

Description : What are the limitations of a centrifugal compressor operation? 

Last Answer : The major limitation of a centrifugal compressor is that is operates at peak efficiency at design point only and any deviation from the operating point is detrimental to its performance. When selecting ... at high pressure, with the consequent reduction in flow, the surge point is not reached.

Briefly describe about ‘rotary compressor’?

Description : Briefly describe about ‘rotary compressor’?  

Last Answer : Rotary compressors have rotors in place of pistons and give a continuous, pulsation free discharge. They operate at high speed and generally provide higher throughput than reciprocating compressors. They are directly ... , vibrate less, and have a lower number of parts which are subject to wear. 

The compressor capacity of a reciprocating compressor is directly proportional to __ a) Speed b) Pressure c) Volume d) All

Description : The compressor capacity of a reciprocating compressor is directly proportional to __ a) Speed b) Pressure c) Volume d) All 

Last Answer : a) Speed

Which of the following type does Screw compressor belongs to? a) Positive displacementcompressor b) Dynamic compressors c) Both a & b d) None of the above

Description : Which of the following type does Screw compressor belongs to? a) Positive displacementcompressor b) Dynamic compressors c) Both a & b d) None of the above 

Last Answer : a) Positive displacementcompressor

Which of the below options are called as appropriate Keyword Density?  A. 0.1-3%  B.01-0.1%  C.7-9.5%  D.3-4%

Description : Which of the below options are called as appropriate Keyword Density?  A. 0.1-3%  B.01-0.1%  C.7-9.5%  D.3-4%

Last Answer : D.3-4%

To be a regional party the minimum percentage of votes, that a party needs to secure in any election is (1) 2% (2) 3% (3) 4% (4) 5%

Description : To be a regional party the minimum percentage of votes, that a party needs to secure in any election is (1) 2% (2) 3% (3) 4% (4) 5%

Last Answer : 2) 3% Explanation: According to the rules, a party has to win three percent of the total number of seats in a state assembly to become a regional party. In October 2011, the Election Commission ( ... the total valid votes polled in a state in addition to winning at least two seats in that Assembly.

Present rate of interested on on 1, 2, 4, 5 years fixed deposit(TD) is a) 6.25%, 6.50%, 7.25%, 7.50% b) 7.25%, 7.50%, 8%, 8.2% c) 8.2%, 8.3%, 8.4%, 8.5% d) None of these

Description : Present rate of interested on on 1, 2, 4, 5 years fixed deposit(TD) is a) 6.25%, 6.50%, 7.25%, 7.50% b) 7.25%, 7.50%, 8%, 8.2% c) 8.2%, 8.3%, 8.4%, 8.5% d) None of these

Last Answer : c) 8.2%, 8.3%, 8.4%, 8.5%

A shopkeeper marked a suit at Rs.400. He sold it after allowing a discount, and still made at a profit of 25%. At what percentage above its cost price did he marked the suit, if he sold it for Rs.320? a)50% b)66 2/3% c)62 1/2% d)56 1/4%

Description : A shopkeeper marked a suit at Rs.400. He sold it after allowing a discount, and still made at a profit of 25%. At what percentage above its cost price did he marked the suit, if he sold it for Rs.320? a)50% b)66 2/3% c)62 1/2% d)56 1/4%

Last Answer : d)56 1/4%

Nandu purchased a mobile phone and got a discount of 5% from dealer. he sold that mobile phone at a profit of 10% on his purchase price. What is the percentage profit on actual price of the mobile phone? 1. 2% 2. 3% 3. 4% 4. 4.5 %

Description : Nandu purchased a mobile phone and got a discount of 5% from dealer. he sold that mobile phone at a profit of 10% on his purchase price. What is the percentage profit on actual price of the mobile phone? 1. 2% 2. 3% 3. 4% 4. 4.5 %

Last Answer : 4. 4.5 %

What is your bond rate? The prime rate is 10%; your current bond rating slipped one category (from AAA to AA). a. 12.1% b. 10.5% c. 11.4% d. 11.2%

Description : What is your bond rate? The prime rate is 10%; your current bond rating slipped one category (from AAA to AA). a. 12.1% b. 10.5% c. 11.4% d. 11.2%

Last Answer : b. 10.5%

According to 2017 census what is the share of FATA in the total Population of Pakistan A. 3% B. 2% C. 1% D. 0.5%

Description : According to 2017 census what is the share of FATA in the total Population of Pakistan A. 3% B. 2% C. 1% D. 0.5%

Last Answer : ANSWER: B

According to 2017 census what is the share of FATA in the total Population of Pakistan A. 3% B. 2% C. 1% D. 0.5%

Description : According to 2017 census what is the share of FATA in the total Population of Pakistan A. 3% B. 2% C. 1% D. 0.5%

Last Answer : ANSWER: B

Rebate is allowed on advance deposit of premium on RPLI for Qtly/Half year/year is a) 1%, 2%,3% b) 0.50%,1%,2% b) 0%, 1%,2% d) No rebate in RPLI

Description : Rebate is allowed on advance deposit of premium on RPLI for Qtly/Half year/year is a) 1%, 2%,3% b) 0.50%,1%,2% b) 0%, 1%,2% d) No rebate in RPLI

Last Answer : b) 0.50%,1%,2%

What is the rebate allowed in advance paid premium for half year & one year? a) 1% & 2% b) 2% & 3% c) 2%&4% d) None of these

Description : What is the rebate allowed in advance paid premium for half year & one year? a) 1% & 2% b) 2% & 3% c) 2%&4% d) None of these

Last Answer : a) 1% & 2%

The cement becomes useless if its absorbed moisture content exceeds [ A ] 1% [ B ] 2% [ C ] 3% [ D ] 5%

Description : The cement becomes useless if its absorbed moisture content exceeds [ A ] 1% [ B ] 2% [ C ] 3% [ D ] 5%

Last Answer : [ D ] 5%

3. S produces and sells one product, P, for which the data are as follows: Selling price Rs 28 Variable cost Rs 16 Fixed cost Rs 4 The fixed costs are based on a budgeted production and sales level of 25,000 units for the next period(a) 10.1% decrease (b) 11.2% decrease (c) 13.3% decrease (d) 16.0% decrea

Description : 3. S produces and sells one product, P, for which the data are as follows: Selling price Rs 28 Variable cost Rs 16 Fixed cost Rs 4 The fixed costs are based on a budgeted production and sales level of 25 ... period(a) 10.1% decrease (b) 11.2% decrease (c) 13.3% decrease (d) 16.0% decrease

Last Answer : (a) 10.1% decrease

Educational cess is charges at the rate of …….. A) 2% B) 1% C) 3% D) 5%

Description : Educational cess is charges at the rate of …….. A) 2% B) 1% C) 3% D) 5%

Last Answer : C) 3%

The likely estimate on equivalent power wastage for a leakage from 7 bar compressed air system through 1.6 mm orifice size is ____ a) 0.2 kW b) 3.0 kW c) 0.8 kW d) 12 kW

Description : The likely estimate on equivalent power wastage for a leakage from 7 bar compressed air system through 1.6 mm orifice size is ____ a) 0.2 kW b) 3.0 kW c) 0.8 kW d) 12 kW

Last Answer : c) 0.8 kW

Air Conditioning/ Electrical

Description : The coil of a transformer that is energized from a source of alternating voltage is known as the: A. low voltage winding B. high voltage winding C. primary winding D. secondary winding

Last Answer : C

Electricity or Air Conditioning

Description : There is a single-phase motor connected in parallel with an electric heater unit. If the heater is switched off, then the overall power factor angle of the circuit will: A. increase B. decrease C. stay the same D. none of the above

Last Answer : A

Explain the simple steps that can be followed in shop – floor for quantification of compressed air leakages.

Description : Explain the simple steps that can be followed in shop – floor for quantification of compressed air leakages.  

Last Answer : The following steps can be followed for quantification of compressed air leakages. Shut off compressed air operated equipments (or conduct test when no equipment is using compressed air). Run the compressor to ... per minute (cmm) T = Time on load in minutes T = Time unload in minutes 

What are the methods of capacity control in centrifugal air compressors?

Description : What are the methods of capacity control in centrifugal air compressors?  

Last Answer : Centrifugal compressors operate best at the design point. They are prone to surging at flow rates less than 50% of the rated capacity. The following types of controls are employed in ... variable speed drives to match compressor output to meet varying load requirements is by speed control 

What are the most common types of compressed air dryers used?

Description : What are the most common types of compressed air dryers used? 

Last Answer : a. Heat – less dryer (absorption) b. Adsorption dryer c. Chiller dryer (refrigerated dryers)

List the components of a compressed air system.

Description : List the components of a compressed air system. 

Last Answer : The various components of a compressed air system are: • Intake air filters • Inter-stage coolers • After coolers • Air-dryers • Moisture traps • Receivers 

Explain about the importance of optimal Pressure settings of a compressed air network

Description : Explain about the importance of optimal Pressure settings of a compressed air network 

Last Answer : The power consumed by a compressor depends on its operating pressure and rated capacity. They should not be operated above their optimum operating pressure as this not only wastes energy, but also leads ... switches must be adjusted such that the compressor cut-in and cuts-off at optimum levels. 

What is the function of an air receiver?

Description : What is the function of an air receiver?

Last Answer : The main purpose of a receiver is to act as a pulsation damper, allowing intermittent high demands for compressed air to be met from a small compressor set, resulting in lesser energy consumption. 

The acceptable pressure drop at the farthest point in mains header of an industrial compressed air network is: a)0.3 bar b) 0.5 bar c) 1.0 bar d) 2 bar

Description : The acceptable pressure drop at the farthest point in mains header of an industrial compressed air network is: a)0.3 bar b) 0.5 bar c) 1.0 bar d) 2 bar

Last Answer : a)0.3 bar

What is the effect of increase in altitude on the performance of single stage reciprocating compressors?

Description : What is the effect of increase in altitude on the performance of single stage reciprocating compressors? 

Last Answer : With the increase in altitude, there will be reduction in air pressure, which results in increase in compression ratio, leading to higher discharge temperature and reduced efficiency. 

List the advantages of keeping the discharge pressure for reciprocating compressors at minimum.

Description : List the advantages of keeping the discharge pressure for reciprocating compressors at minimum. 

Last Answer : Lower power consumption Less load on the piston rods and hence reduced maintenance costs Lower leakage losses