Rated power of a bulb at V voltage is P. Now, same voltage V is applied in all conditions mentioned in Column I. Match this Column I with Column II in

Rated power of a bulb at V voltage is P. Now, same voltage V is applied in all conditions mentioned in Column I. Match this Column I with Column II in
by

1 Answer

Answer :

Rated power of a bulb at V voltage is P. Now, same voltage V is applied in all conditions ... Column II in which actual total power consumed is given.
by
selected by

Related questions

Match the column - I with column - II. Column-I Column-II (A) P-wave (i) Depolarisation of ventricles (B) QRS complex (ii) Repolarisation of ventricles (C) T-wave (iii) Coronary ischaemia (D) Reduction in the size of T- wave (iv) Depolarisation of atria (v) Repolarisation of atria Select the correct option. (A) (B) (C) (D) (a) (ii) (iii) (v) (iv) (b) (iv) (i) (ii) (iii) (c) (iv) (i) (ii) (v) (d) (ii) (i) (v) (iii)

Description : Match the column - I with column - II. Column-I Column-II (A) P-wave (i) Depolarisation of ventricles (B) QRS complex (ii) Repolarisation of ventricles (C) T-wave (iii) Coronary ischaemia (D) Reduction in the size of T- wave (iv) ... ) (i) (ii) (iii) (c) (iv) (i) (ii) (v) (d) (ii) (i) (v) (iii)

Last Answer : (b) (iv) (i) (ii) (iii)

The voltage applied to the H.V. side of a transformer during S.C. test is 2% of the rated voltage. The core loss

Description : The voltage applied to the H.V. side of a transformer during S.C. test is 2% of the rated voltage. The core loss as the fraction of its rated core loss is (a) 4% (b) 0.4% (c) 0.25% (d) 0.04%

Last Answer : 0.04%

A balanced three-phase, 50 Hz voltage is applied to a 3 phase, 4 pole, induction motor. When the motor is delivering rated output, the slip is found to be 0.05. The speed of the rotor m.m.f. relative to the rotor structure is (A) 1500 r.p.m. (B) 1425 r.p.m. (C) 25 r.p.m. (D) 75 r.p.m.

Description : A balanced three-phase, 50 Hz voltage is applied to a 3 phase, 4 pole, induction motor. When the motor is delivering rated output, the slip is found to be 0.05. The speed of the rotor m.m.f. relative to the rotor structure is (A) 1500 r.p.m. (B) 1425 r.p.m. (C) 25 r.p.m. (D) 75 r.p.m.

Last Answer : (D) 75 r.p.m.

If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value by which the power would decrease is

Description : If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value by which the power would decrease is

Last Answer : If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value ... 20%` B. `2.5%` C. `5%` D. `10%`

if the rated voltage from the power lines is applied to the primary of a single-phase transformer...

Description : if the rated voltage from the power lines is applied to the primary of a single-phase transformer which is operated on no-load, then

Last Answer : if the rated voltage from the power lines is applied to the primary of a single-phase transformer which is operated on no-load, then input voltage is sinusoidal and input current is non sinusoidal.

Match the items given in column I with those in column II and select the correct option given below. Column I Column II (Function) (Part of excretory system) A. Ultrafiltration (i) Henle’s loop B. Concentration (ii) Ureter of urine C. Transport of urine(iii) Urinary bladder D. Storage of urine (iv) Malpighian corpuscle (v) Proximal convoluted tubule A B C D (a) (iv) (v) (ii) (iii) (b) (iv) (i) (ii) (iii) (c) (v) (iv) (i) (ii) (d) (v) (iv) (i) (iii)

Description : Match the items given in column I with those in column II and select the correct option given below. Column I Column II (Function) (Part of excretory system) A. Ultrafiltration (i) Henle's loop B. Concentration (ii) Ureter of urine C. ... (ii) (iii) (c) (v) (iv) (i) (ii) (d) (v) (iv) (i) (iii)

Last Answer : (b) (iv) (i) (ii) (iii)

Match the columns `{:(,"Column I",,"Column II"),(a,"Bicuspid valve",p,"Brain"),(b,"Nephron",q,"Liver"),(c,"Alveoli",r,"Heart"),(d,"Cerebrum",s,"Kidney

Description : Match the columns `{:(,"Column I",,"Column II"),(a,"Bicuspid valve",p,"Brain"),(b,"Nephron",q,"Liver"),(c,"Alveoli",r,"Heart"),(d,"Cerebrum",s,"Kidney

Last Answer : Match the columns `{:(,"Column I",,"Column II"),(a,"Bicuspid valve",p,"Brain"),(b,"Nephron",q,"Liver"),(c,"Alveoli" ... ,c-t,d-p` D. `a-s,b-q,c-p,d-t`

Match the column and find correct combination: `{:(,"Column I",,"Column II"),((a),"Drawub",p,"Mutation theory"),((b),"De Vries",q,"Protobiosis"),((c),

Description : Match the column and find correct combination: `{:(,"Column I",,"Column II"),((a),"Drawub",p,"Mutation theory"),((b),"De Vries",q,"Protobiosis"),((c),

Last Answer : Match the column and find correct combination: `{:(,"Column I",,"Column II"),((a),"Drawub",p,"Mutation theory"),((b), ... q, d=p D. a=r, b=t, c=p, d=q

Match each of the reaction given in Column I with the corresponding product(s) given in Column II. `{:("Column I","Column II"),(A. "Cu+dil. HNO"_(3),p

Description : Match each of the reaction given in Column I with the corresponding product(s) given in Column II. `{:("Column I","Column II"),(A. "Cu+dil. HNO"_(3),p

Last Answer : Match each of the reaction given in Column I with the corresponding product(s) given in Column II. `{:("Column I"," ... (,t. "Zn"("NO"_(3))_(2)):}`

Match each of the reaction given in Column I with the corresponding product(s) given in Column II. `{:("Column I","Column II"),(A. "Cu+dil. HNO"_(3),p

Description : Match each of the reaction given in Column I with the corresponding product(s) given in Column II. `{:("Column I","Column II"),(A. "Cu+dil. HNO"_(3),p

Last Answer : Match each of the reaction given in Column I with the corresponding product(s) given in Column II. `{:("Column I"," ... (,t. "Zn"("NO"_(3))_(2)):}`

Match the Column-I with Column-II: `{:("Column-I","Column-II"),((a) n to p^(+) + ......,(p) "Positron emission"),((b) p^(+) to n + .....,(q) beta - "e

Description : Match the Column-I with Column-II: `{:("Column-I","Column-II"),((a) n to p^(+) + ......,(p) "Positron emission"),((b) p^(+) to n + .....,(q) beta - "e

Last Answer : Match the Column-I with Column-II: `{:("Column-I","Column-II"),((a) n to p^(+) + ......,(p) " ... + 2 beta^(+) + "Energy",(s) alpha - "emission"):}`

Match the Column-I with Column-II: `{:("Column-I","Column-II"),((a) ._(1)^(2)D + ._(1)^(3)T to ._(2)^(4)He + ._(0)^(1)n + "Energy",(p) beta - "emissio

Description : Match the Column-I with Column-II: `{:("Column-I","Column-II"),((a) ._(1)^(2)D + ._(1)^(3)T to ._(2)^(4)He + ._(0)^(1)n + "Energy",(p) beta - "emissio

Last Answer : Match the Column-I with Column-II: `{:("Column-I","Column-II"),((a) ._(1)^(2)D + ._(1)^(3)T to ._(2)^ ... )^(1)H + ._(+1)^(0)e,(s) "Hydrogen bomb"):}`

Match the conversions in Column I with the type(s) of reaction(s) given in Column II. `{:("Column I","ColumnII"),(A. "PbS"rarr"PbO",p. "Roasting"),(B.

Description : Match the conversions in Column I with the type(s) of reaction(s) given in Column II. `{:("Column I","ColumnII"),(A. "PbS"rarr"PbO",p. "Roasting"),(B.

Last Answer : Match the conversions in Column I with the type(s) of reaction(s) given in Column II. `{:("Column I","ColumnII"),(A. ... D. a-p, s: b-p,q : c-p: d-s

A split-phase induction squirrel-cage motor will not come up to speed, even though the rated voltage, rated frequency, and rated load are applied. The suspected trouble could be due to _____________. A. a faulty centrifugal switch B. broken rotor bars C. worn bearings D. all of the above

Description : A split-phase induction squirrel-cage motor will not come up to speed, even though the rated voltage, rated frequency, and rated load are applied. The suspected trouble could be due to _____________. A. a faulty centrifugal switch B. broken rotor bars C. worn bearings D. all of the above

Last Answer : Answer: D

Periodic testing of circuit breakers is necessary to assure that a correctly rated and properly installed unit _________________. A. can trip faster as it increases in age B. will continue to provide the original degree of protection C. does not exceed its interrupting capacity D. be able to withstand at least 125% of applied voltage

Description : Periodic testing of circuit breakers is necessary to assure that a correctly rated and properly installed unit _________________. A. can trip faster as it increases in age B. will continue to provide ... not exceed its interrupting capacity D. be able to withstand at least 125% of applied voltage

Last Answer : Answer: B

The torque produced by a motor when its shaft will not turn, even though rated voltage is applied to the stator, is known as _____________. A. locked-rotor torque B. pullout torque C. breakdown torque D. torque margin

Description : The torque produced by a motor when its shaft will not turn, even though rated voltage is applied to the stator, is known as _____________. A. locked-rotor torque B. pullout torque C. breakdown torque D. torque margin

Last Answer : Answer: A

An unsaturated dc shunt motor runs at its rated speed when rated voltage is applied to it. If the

Description : An unsaturated dc shunt motor runs at its rated speed when rated voltage is applied to it. If the supply voltage to the motor is reduced by 25%, the speed of the motor  (a) Increases by 25% (b) Remains the same (c) Decreases by 25% (d) Decrease only slightly by an amount less than 25% 

Last Answer : An unsaturated dc shunt motor runs at its rated speed when rated voltage is applied to it. If the supply voltage to the motor is reduced by 25%, the speed of the motor Remains the same

A permanent magnet moving coil instrument gives full scale deflection of 25mA when a voltage of 75mV is applied across it. Calculate: (i) Resistance of shunt required for full scale deflection of 150 A. (ii) Series resistance for full scale deflection of 500 V.

Description : A permanent magnet moving coil instrument gives full scale deflection of 25mA when a voltage of 75mV is applied across it. Calculate: (i) Resistance of shunt required for full scale deflection of 150 A. (ii) Series resistance for full scale deflection of 500 V.

Last Answer : Answer :

An AC supply of 230 V is applied to half wave rectifier circuit. A transformer turns ratio is 20 : 1. Find i) Output DC voltage (ii) Peak Inverse Voltage (PIV)

Description : An AC supply of 230 V is applied to half wave rectifier circuit. A transformer turns ratio is 20 : 1. Find i) Output DC voltage (ii) Peak Inverse Voltage (PIV)

Last Answer : Solution:

A light bulb has a resistance of 5 ohms and a maximum current of 10 A. How much voltage can be applied before the bulb will break?

Description : A light bulb has a resistance of 5 ohms and a maximum current of 10 A. How much voltage can be applied before the bulb will break?

Last Answer : 50-Voltage

When replacing component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its base B. there is a danger of phosphor poisoning should 'B''s bulb break C. component 'D' must be closed during the replacement to provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Description : When replacing component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its ... provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Last Answer : Answer: D

When changing out component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its base B. there is a danger of phosphor poisoning should 'B''s bulb break C. component 'D' must be closed during the replacement to provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Description : When changing out component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its ... provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Last Answer : Answer: D

Which of the following strings would match the regular expression: p+[3-5]*[xyz]? I. p443y Il. p6y III. 3xyz IV. p35z V. p353535x Vl. ppp5 (1) I, III and Vl only (2) IV, V and VI only (3) II, IV and V only (4) I, IV and V only

Description : Which of the following strings would match the regular expression: p+[3-5]*[xyz]? I. p443y Il. p6y III. 3xyz IV. p35z V. p353535x Vl. ppp5 (1) I, III and Vl only (2) IV, V and VI only (3) II, IV and V only (4) I, IV and V only

Last Answer : Answer: 4

A 100 kVA, 415 V(line), star-connected synchronous machine generates rated open circuit voltage of 415 V

Description : A 100 kVA, 415 V(line), star-connected synchronous machine generates rated open circuit voltage of 415 V at a field current of 15 A. The short circuit armature current at a field current of 10 A is equal to the ... unit saturated synchronous reactance is  (A) 1.731 (B) 1.5 (C) 0.666 (D) 0.577

Last Answer : 0.6

A supply of 24 V DC is applied across a circuit which consist of three resistors connected in parallel R1= 1.2KΩ, R2= 560 Ω, R3= 2.1Ω and a fourth resistor of 7.8 Ω connected in series with the parallel group. Determine the current, voltage and power across each resistor

Last Answer : Req= (1/1200 +1/560 + 1/2.1)^-1        = 2.1 ohms RT= 2.1 + 7.8      = 9.9 ohms IT = V/R = 24/9.9                = 2.4 A Veq= R I =  2.1 2 ... 7.8         = 12.096 w                 = 44.928 w _________________________________________ By: Ellis-Junior Kamatjipose [email protected]

The current through a flashlight bulb is 40 mA and the total battery voltage is 4.5 V. The

Description : The current through a flashlight bulb is 40 mA and the total battery voltage is 4.5 V. The resistance of the bulb is approximately? A.112 ohms B.11.2 ohms C.1.2 ohms D.18 ohms

Last Answer : 112ohm

A 500 MW, 3-phase, Y-connected synchronous generator has a rated voltage of 21.5 kV at 0.85 p.f. The line

Description : A 500 MW, 3-phase, Y-connected synchronous generator has a rated voltage of 21.5 kV at 0.85 p.f. The line current when operating at full load rated conditions will be  (A) 13.43 kA (B) 15.79 kA (C) 23.25 kA (D) 27.36 kA

Last Answer : A 500 MW, 3-phase, Y-connected synchronous generator has a rated voltage of 21.5 kV at 0.85 p.f. The line current when operating at full load rated conditions will be 15.79 kA

An alternator is delivering rated current at rated voltage and 0.8 power-factor lagging case. If it is required to deliver rated current at rated voltage and 0.8 power-factor leading, the required excitation will be (A) less. (B) more. (C) more or less. (D) the same.

Description : An alternator is delivering rated current at rated voltage and 0.8 power-factor lagging case. If it is required to deliver rated current at rated voltage and 0.8 power-factor leading, the required excitation will be (A) less. (B) more. (C) more or less. (D) the same.

Last Answer : Ans: B Over excitation gives leading power factor and under excitation gives lagging p.f .

. Most cooling towers are capacity rated at a "standard" wet bulb temperature of ___of • 72°F • 52°F • 78°F • 75°F

Description : . Most cooling towers are capacity rated at a "standard" wet bulb temperature of ___of • 72°F • 52°F • 78°F • 75°F

Last Answer : 78°F

Under normal conditions, the speed of a two-speed squirrel cage induction motor is changed by varying the ____________. A. frequency of the applied voltage B. resistance in the rotor circuit C. number of field poles D. amplitude of the applied voltage

Description : Under normal conditions, the speed of a two-speed squirrel cage induction motor is changed by varying the ____________. A. frequency of the applied voltage B. resistance in the rotor circuit C. number of field poles D. amplitude of the applied voltage

Last Answer : Answer: C

A unit step voltage is applied at t = 0 to a series RL circuit with zero initial conditions

Description : A unit step voltage is applied at t = 0 to a series RL circuit with zero initial conditions  A) It is possible for the current to be oscillatory B) The voltage across the resistor at t ... The energy stored in the inductor in the steady state is zero D) Theresistor current eventually falls to zero 

Last Answer : A

A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC

Description : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

Last Answer : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

Match Column-I with Column-II for housefly classification and select the correct option using the codes given below : new question

Description : Match Column-I with Column-II for housefly classification and select the correct option using the codes given below : new question

Last Answer : Match Column-I with Column-II for housefly classification and select the correct option using the codes given below : new ... ,b,c,d),(iii,ii,iv,i):}`

Correct match column -I with column-II :

Description : Correct match column -I with column-II :

Last Answer : Correct match column -I with column-II : A. A-(vii),B-(v),C-(iii),D-(i),E-(iv),F-(iv),G-(ii) B. A-(vii ... B-(ii),C-(iii),D-(iv),E-(v),F-(vi),G-(vii)

Correctly match column -I with column -II

Description : Correctly match column -I with column -II

Last Answer : Correctly match column -I with column -II A. A-(i),B-(ii),C-(iii),D-(iv),E-(v) B. A-(iv),B-(ii),C-(v),D- ... (i) D. A-(iv),B-(iii),C-(v),D-(i),E-(ii)

Match the column -I with column -II and choose the correct option :

Description : Match the column -I with column -II and choose the correct option :

Last Answer : Match the column -I with column -II and choose the correct option : A. A-i,B-ii,C-iii,D-iv,E-v,F-vi B. A-v, ... ,F-vi D. A-ii,B-i,C-iii,D-iv,E-v,F-vi

Identify the correct match from the column I,II and III `:-`

Description : Identify the correct match from the column I,II and III `:-`

Last Answer : Identify the correct match from the column I,II and III `:-` A. `1-c-iv,2-a-iii,3-b-i,4-d-ii` B. `1-d-iv, ... -c-ii` D. `1-d-iv,2-a-iii,3-b-ii,4-c-i`

Match the following `:-` `{:(,"Column-I",,"Column-II"),(A,"PCT",(i),"Selective secretion of " H^(o+) " and " K^(o+) "ions"),(B,"DCT",(ii),"70-80 perce

Description : Match the following `:-` `{:(,"Column-I",,"Column-II"),(A,"PCT",(i),"Selective secretion of " H^(o+) " and " K^(o+) "ions"),(B,"DCT",(ii),"70-80 perce

Last Answer : Match the following `:-` `{:(,"Column-I",,"Column-II"),(A,"PCT",(i),"Selective secretion of " H^(o+) " and " ... `A-(ii),B-(i),C-(iv),D-(v),E-(iii)`

Match the column-I with Column-II Choose the correct option :

Description : Match the column-I with Column-II Choose the correct option :

Last Answer : Match the column-I with Column-II Choose the correct option : A. A-ii,B-iii,C-v,D-iv,E-i B. A-ii,B-v,C-iii, ... ,D-iv,E-ii D. A-i,B-v,C-iii,D-iv,E-ii

Correctly match column -I with column -II `{:(,"Column -I",,"Column-II"),(A-,"Cardiac arrest",(ii), "Heart not pumping blood effectively"),(B-,"Heart

Description : Correctly match column -I with column -II `{:(,"Column -I",,"Column-II"),(A-,"Cardiac arrest",(ii), "Heart not pumping blood effectively"),(B-,"Heart

Last Answer : Correctly match column -I with column -II `{:(,"Column -I",,"Column-II"),(A-,"Cardiac arrest",(ii), ... `Ararr(ii),Brarr(iii) ,Crarr(i) , Drarr(iv)`

Match the Colum-I with Column -II . `{:(,"Column-I",,"Column-II"),((A),"Fish",(i),"3-chambered heart "),((B),"Amphibia",(ii) ,"Incomplete double circu

Description : Match the Colum-I with Column -II . `{:(,"Column-I",,"Column-II"),((A),"Fish",(i),"3-chambered heart "),((B),"Amphibia",(ii) ,"Incomplete double circu

Last Answer : Match the Colum-I with Column -II . `{:(,"Column-I",,"Column-II"),((A),"Fish",(i),"3-chambered heart "),(( ... v),(iv) B rarr (i),(ii)C rarr (v),(vi)`

Match column `I` with column `II` and select the correct option from the codes given below `{:(,"Column I",,"Column II"),("A.","Superior vera cave","(

Description : Match column `I` with column `II` and select the correct option from the codes given below `{:(,"Column I",,"Column II"),("A.","Superior vera cave","(

Last Answer : Match column `I` with column `II` and select the correct option from the codes given below `{:(,"Column I",,"Column II" ... -p,d-q, D. a-t,b-p,c-r,d-q

Match column I with column II and select the correct option from the given codes. `{:(,"Column I",,"Column II"),(A.,"Tidal volume",(i),2500-3000 mL "o

Description : Match column I with column II and select the correct option from the given codes. `{:(,"Column I",,"Column II"),(A.,"Tidal volume",(i),2500-3000 mL "o

Last Answer : Match column I with column II and select the correct option from the given codes. `{:(,"Column I",,"Column II"),(A. ... (A,B,C,D,E),(iv,iii,ii,i,v):}`

Identify the correct match from the column I,II and III

Description : Identify the correct match from the column I,II and III

Last Answer : Identify the correct match from the column I,II and III A. `A-d-I,B-a-iii,C-b-iv,D-c-ii` B. `A-d-ii,B-a-iii ... c-i` D. `A-b-I,B-a-ii,C-c-iii,D-d-iv`

Match the column : `{:((a),"Australopithecus",(i),"First human like"),((b),"Homo habilis",(ii),"Used hides to protect the body"),((c),"Homo erectus",(

Description : Match the column : `{:((a),"Australopithecus",(i),"First human like"),((b),"Homo habilis",(ii),"Used hides to protect the body"),((c),"Homo erectus",(

Last Answer : Match the column : `{:((a),"Australopithecus",(i),"First human like"),((b),"Homo habilis",(ii),"Used hides to ... D. a-v, b-ii c-ii, d-`i`, e-iv

Match the items of column I and Column II and select the correct combination

Description : Match the items of column I and Column II and select the correct combination

Last Answer : Match the items of column I and Column II and select the correct combination A. a-q,b-r,c-p B. a-r,b-q,c-p C. a-r,b-q,c-r D. a-r,b-p,c-q

Match the codons given in column I with their respective amino acids given in column II and choose the correct answer.

Description : Match the codons given in column I with their respective amino acids given in column II and choose the correct answer.

Last Answer : Match the codons given in column I with their respective amino acids given in column II and choose the correct answer. ... -II, b-IV, c-I, d-V, e-III

Match column-I and column-II and select the answer :

Description : Match column-I and column-II and select the answer :

Last Answer : Match column-I and column-II and select the answer : A. (a-s), (b-r), (c-q), (d-p) B. (a-p), (b-r), (c-q), ... ), (d-p) D. (a-q), (b-r), (c-s), (d-p)

Match column I & II. `{:(,"Column-I",,"Column-II"),((a),"Monophyodont teeth",(1),(2)/(2)","(1)/(1)","(0)/(0)","(2)/(2)),((b),"Adolescence teeth",(2),(

Description : Match column I & II. `{:(,"Column-I",,"Column-II"),((a),"Monophyodont teeth",(1),(2)/(2)","(1)/(1)","(0)/(0)","(2)/(2)),((b),"Adolescence teeth",(2),(

Last Answer : Match column I & II. `{:(,"Column-I",,"Column-II"),((a),"Monophyodont teeth",(1),(2)/(2)","(1)/(1)","(0)/(0)" ... b-4, c-2, d-3 D. a-2, b-4, c-3, d-1

Match the reactions in Column I with appropriate options in Column II.

Description : Match the reactions in Column I with appropriate options in Column II.

Last Answer : Match the reactions in Column I with appropriate options in Column II.