What is the solid angle subtended by the moon at any point of the Earth, given the diameter of the moon is 3474 km and its distance

What is the solid angle subtended by the moon at any point of the Earth, given the diameter of the moon is 3474 km and its distance
by

1 Answer

Answer :

What is the solid angle subtended by the moon at any point of the Earth, given the diameter of the moon ... its distance from the Earth 3.84 108 m?
by
selected by

Related questions

The moon is at a distance of 3.84 × 10^8 m from the Earth. If viewed from two diametrically opposite points on the Earth, the angle subtended

Description : The moon is at a distance of 3.84 × 10^8 m from the Earth. If viewed from two diametrically opposite points on the Earth, the angle subtended

Last Answer : The moon is at a distance of 3.84 108 m from the Earth. If viewed from two diametrically opposite ... is 1° 54′. What is the diameter of the Earth?

Solid angle subtended by the finite surface at the radiating element is (A) Called the view factor (B) Called the angle of vision (C) Proportional to the square of the distance between surfaces (D) Expressed in terms of radians

Description : Solid angle subtended by the finite surface at the radiating element is (A) Called the view factor (B) Called the angle of vision (C) Proportional to the square of the distance between surfaces (D) Expressed in terms of radians

Last Answer : (B) Called the angle of vision

The difference in the lengths of an arc and its subtended chord on the earth surface for a distance of 18.2 km, is only (A) 1 cm (B) 5 cm (C) 10 cm (D) 100 cm

Description : The difference in the lengths of an arc and its subtended chord on the earth surface for a distance of 18.2 km, is only (A) 1 cm (B) 5 cm (C) 10 cm (D) 100 cm

Last Answer : (C) 10 cm

Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder (C) The wavelength corresponding to maximum mono-chromatic emissive power increases with rise in temperature (D) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Description : Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate ... ) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Last Answer : (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder

Which one of the following statements is correct? (A) (B) The cone subtended by an area on the sphere at the centre, is called the solid angle (C) The solid angle is equal to the ratio of the area on the sphere and the square of the radius of the sphere (D) All of these

Description : Which one of the following statements is correct? (A) (B) The cone subtended by an area on the sphere at the centre, is called the solid angle (C) The solid angle is equal to the ratio of the area on the sphere and the square of the radius of the sphere (D) All of these

Last Answer : Answer: Option D

A chord of a circle is equal to its radius. Find the angle subtended by this chord at a point in major segment. -Maths 9th

Description : A chord of a circle is equal to its radius. Find the angle subtended by this chord at a point in major segment. -Maths 9th

Last Answer : Given, AB is a chord of a circle, which is equal to the radius of the circle, i.e., AB = BO …(i) Join OA, AC and BC. Since, OA = OB= Radius of circle OA = AS = BO

A chord of a circle is equal to its radius. Find the angle subtended by this chord at a point in major segment. -Maths 9th

Description : A chord of a circle is equal to its radius. Find the angle subtended by this chord at a point in major segment. -Maths 9th

Last Answer : Given, AB is a chord of a circle, which is equal to the radius of the circle, i.e., AB = BO …(i) Join OA, AC and BC. Since, OA = OB= Radius of circle OA = AS = BO

A circle has radius √2 cm. It is divided into two segments by a chord of length 2cm.Prove that the angle subtended by the chord at a point in major segment is 45 degree . -Maths 9th

Description : A circle has radius √2 cm. It is divided into two segments by a chord of length 2cm.Prove that the angle subtended by the chord at a point in major segment is 45 degree . -Maths 9th

Last Answer : Given radius =2 cm Therefore AO=2 cm Let OD be the perpendicular from O on AB And AB =2cm Therefore AD=1cm (perpendicular from the centre bisects the chord) Now in triangle AOD, AO=2 cm ... by a chord at the centre is double of the angle made by the chord at any poin on the circumference)

Find the potential due the dipole when the angle subtended by the two charges at the point P is perpendicular. a) 0 b) Unity c) ∞ d) -∞

Description : Find the potential due the dipole when the angle subtended by the two charges at the point P is perpendicular. a) 0 b) Unity c) ∞ d) -∞

Last Answer : a) 0

The diameter of the planet Jupiter is `3580km`. What is its angular diameter when it is at a distance of `8.25xx10^(8)km` from the earth?

Description : The diameter of the planet Jupiter is `3580km`. What is its angular diameter when it is at a distance of `8.25xx10^(8)km` from the earth?

Last Answer : The diameter of the planet Jupiter is `3580km`. What is its angular diameter when it is at a distance of `8.25xx10^(8)km` from the earth?

Refer to problem # 11. Determine the force that accelerates if to 12 m/s^2. horizontally along frictionless plane.  A. 2474.23 N  B. 2574.23 N  C. 3474.23 N  D. 2374.23 N Formula : M = wk / g F = ma /k

Description : Refer to problem # 11. Determine the force that accelerates if to 12 m/s^2. horizontally along frictionless plane.  A. 2474.23 N  B. 2574.23 N  C. 3474.23 N  D. 2374.23 N Formula : M = wk / g F = ma /k

Last Answer : 2474.23 N

If a circle is divided into eight equal parts, find the angle subtended by each arc at the centre. -Maths 9th

Description : If a circle is divided into eight equal parts, find the angle subtended by each arc at the centre. -Maths 9th

Last Answer : Total angle at centre = 360° When divided into eight part, Angle subtended by each arc = 360 / n8 = 45°

The angle subtended by the surface of sewer water with partial flow, at sewer centre is 120°, the depth of sewerage is A. 20 cm B. 25 cm C. 40 cm D. 50 cm

Description : The angle subtended by the surface of sewer water with partial flow, at sewer centre is 120°, the depth of sewerage is A. 20 cm B. 25 cm C. 40 cm D. 50 cm

Last Answer : ANS: D

Designation of a curve is made by: (A) Angle subtended by a chord of any length (B) Angle subtended by an arc of specified length (C) Radius of the curve (D) Curvature of the curve

Description : Designation of a curve is made by:  (A) Angle subtended by a chord of any length  (B) Angle subtended by an arc of specified length  (C) Radius of the curve  (D) Curvature of the curve 

Last Answer : (C) Radius of the curve 

Degree of a road curve is defined as the angle in degrees subtended at the centre by an arc of (A) 10 metres (B) 20 metres (C) 25 metres (D) 30 metres

Description : Degree of a road curve is defined as the angle in degrees subtended at the centre by an arc of (A) 10 metres (B) 20 metres (C) 25 metres (D) 30 metres

Last Answer : Answer: Option B

The angle of elevation of the antenna beam is 20°. Calculate the transmission-path distance for an ionospheric transmission that utilizes a layer of virtual height 200 km. Use flat-earth approximation. A. 966 km B. 2100 km C. 1100 km D. 405 km

Description : The angle of elevation of the antenna beam is 20°. Calculate the transmission-path distance for an ionospheric transmission that utilizes a layer of virtual height 200 km. Use flat-earth approximation. A. 966 km B. 2100 km C. 1100 km D. 405 km

Last Answer : C. 1100 km

Pluto has mean diameter of 2,300 km and very eccentric orbit (oval shaped) around the Sun, with a perihelion (nearest) distance of 4.4 × 10^9 km

Description : Pluto has mean diameter of 2,300 km and very eccentric orbit (oval shaped) around the Sun, with a perihelion (nearest) distance of 4.4 × 10^9 km

Last Answer : Pluto has mean diameter of 2,300 km and very eccentric orbit (oval shaped) around the Sun, ... Assume that distance from the Sun can be neglected.

If diameter of a wheel is 1.26 m, what the distance covered in 500 revolutions? (a) 1.38 km (b) 4.64 km (c) 2.46 km (d) 1.98 km

Description : If diameter of a wheel is 1.26 m, what the distance covered in 500 revolutions? (a) 1.38 km (b) 4.64 km (c) 2.46 km (d) 1.98 km

Last Answer : (d) 1.98 km

A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Description : A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Last Answer : e. Either of (A) and (C)

If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105 N/mm2 ) when subjected to a twisting moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is (A) 0.001 (B) 0.002 (C) 0.0025 (D) 0.003

Description : If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105  N/mm2 ) when subjected to a twisting  moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is  (A) 0.001  (B) 0.002  (C) 0.0025  (D) 0.003 

Last Answer : (C) 0.0025 

If the angles subtended by the chords of a circle at the centre are equal, then chords are equal. -Maths 9th

Description : If the angles subtended by the chords of a circle at the centre are equal, then chords are equal. -Maths 9th

Last Answer : Given : In a circle C(O,r) , ∠AOB = ∠COD To Prove : Chord AB = Chord CD . Proof : In △AOB and △COD AO = CO [radii of same circle] BO = DO [radii of same circle] ∠AOB = ∠COD [given] ⇒ △AOB ≅ △COD [by SAS congruence axiom] ⇒ Chord AB = Chord CD [c.p.c.t]

If the angles subtended by the chords of a circle at the centre are equal, then chords are equal. -Maths 9th

Description : If the angles subtended by the chords of a circle at the centre are equal, then chords are equal. -Maths 9th

Last Answer : Given : In a circle C(O,r) , ∠AOB = ∠COD To Prove : Chord AB = Chord CD . Proof : In △AOB and △COD AO = CO [radii of same circle] BO = DO [radii of same circle] ∠AOB = ∠COD [given] ⇒ △AOB ≅ △COD [by SAS congruence axiom] ⇒ Chord AB = Chord CD [c.p.c.t]

The ratio of the angles subtended at the eye, by the virtual image and the object, is known as telescopes (A) Resolving power (B) Brightness (C) Field of view (D) Magnification

Description : The ratio of the angles subtended at the eye, by the virtual image and the object, is known as telescopes (A) Resolving power (B) Brightness (C) Field of view (D) Magnification

Last Answer : (D) Magnification

Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will just take hold of a particle and draw it in the crushing zone (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing (D) Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Description : Pick out the wrong statement. (A) Gape is the greatest distance between the crushing surfaces or the jaws (B) The angle of nip (2α) is the angle between roll faces at the level where they will ... Reduction ratio is the ratio of the maximum size of the particles in the feed to that in the product

Last Answer : (C) Crushing efficiency is the ratio of the energy absorbed by the solid to the surfaces energy created by crushing

The diameter of the moon is approximately one fourth of the diameter of the earth. Find the ratio of their surface areas -Maths 9th

Description : The diameter of the moon is approximately one fourth of the diameter of the earth. Find the ratio of their surface areas -Maths 9th

Last Answer : If diameter of earth is said d, then the diameter of moon will be d/4 (as per given statement) Radius of earth = d/2 Radius of moon = ½×d/4 = d/8 Surface area of moon = 4π(d/8)2 Surface area of earth = 4π(d/2)2 Ncert solutions class 9 chapter 13-6

India's latitudinal and longitudinal extent measured in degrees are almost the same, but its north-south extent measured in km is greater than its east-west extent. This is due to the fact that (a) longitudes are not parallel lines (b) the distance between latitudes remains the same but the distance between longitudes is greatest at the Equator and nil at the poles where all longitudes join (c) all longitudes with their opposites form great circles (d) the earth is not a perfect sphere

Description : India's latitudinal and longitudinal extent measured in degrees are almost the same, but its north-south extent measured in km is greater than its east-west extent. This is due to the fact that (a) ... (c) all longitudes with their opposites form great circles (d) the earth is not a perfect sphere

Last Answer : Ans: (b)

$ The approximate distance between the sun and the Earth is about 148.7 million km. ! The dimensions of the habitates, regions of the earth are about

Description : $ The approximate distance between the sun and the Earth is about 148.7 million km. ! The dimensions of the habitates, regions of the earth are about

Last Answer : $ The approximate distance between the sun and the Earth is about 148.7 million km. ! The dimensions of ... is wrong D. If both As and R are wrong.

The altitudinal distance of a geostationary satellite from the earth is about: (A) 26,000 km (B) 30,000 km (C) 36,000 km (D) 44,000 km

Description : The altitudinal distance of a geostationary satellite from the earth is about: (A) 26,000 km (B) 30,000 km (C) 36,000 km (D) 44,000 km

Last Answer : Answer: Option C

Solar eclipse occurs when (a) Earth comes between sun and moon (b) Moon is at right angle to the earth (c) Moon comes between sun and earth (d) Sun comes between moon and earth

Description : Solar eclipse occurs when (a) Earth comes between sun and moon (b) Moon is at right angle to the earth (c) Moon comes between sun and earth (d) Sun comes between moon and earth

Last Answer : Ans:(c)

To set out a parallel from a given inaccessible point to a given line AB, the following observations are made: Distance AB and angle PAM = a and angle PBA = b are measured where M is a point on the line BA produced. The perpendicular to the desired parallel line from A and B are: (A) AB/(cot b - cot a) (B) AB/(cos b - cos a) (C) AB/(cot a - cot b) (D) AB/(cot a - cos b)

Description : To set out a parallel from a given inaccessible point to a given line AB, the following observations are made: Distance AB and angle PAM = a and angle PBA = b are measured where M is a point on the line BA produced. The ... cos b - cos a) (C) AB/(cot a - cot b) (D) AB/(cot a - cos b)

Last Answer : (A) AB/(cot b - cot a)

What is the distance of the moon from the earth? -General Knowledge

Description : What is the distance of the moon from the earth? -General Knowledge

Last Answer : The moon's orbit around Earth is elliptical. At perigee - its closest approach - the moon comes as close as 225,623 miles (363,104 kilometers). At apogee - the farthest away it gets - the moon is 252 ... from Earth. On average, the distance from Earth to the moon is about 238,855 miles (384,400 km).

How to find the distance, the Earth 's moon, at any time?

Description : Hello, I'm Tomáš and I need advice. I'm studying abroad and we just have to write a small seminar - IA- in mathematics. I have chosen a topic that is: The changing distance between the ... Does anyone know of any site or program with which I can calculate this information? Thank you in advance.

Last Answer : jgiesen.de/moon heavens-above.com

What is the distance between the Moon and Earth?

Description : What is the distance between the Moon and Earth?

Last Answer : on average; 384,403 km (238,857 mi).It's about 384,400 km on average.

The position of the moon, when it is at the greatest distance from the earth is known as

Description : The position of the moon, when it is at the greatest distance from the earth is known as

Last Answer : Apogee

The distance b/w Earth and Moon is------? A. 3,50,000km B. 3,60,100km C. 3,72,000km D. 3,84,400km (Answer)

Description : The distance b/w Earth and Moon is------? A. 3,50,000km B. 3,60,100km C. 3,72,000km D. 3,84,400km (Answer)

Last Answer : D. 3,84,400km (Answer)

If the distance between the earth and moon were halved, the force of the attraction between them would be: w) one fourth as great x) one half as great y) twice as great z) four times as great

Description : If the distance between the earth and moon were halved, the force of the attraction between them would be: w) one fourth as great x) one half as great y) twice as great z) four times as great 

Last Answer : ANSWER: Z -- FOUR TIMES AS GREAT

From the Survey of India map, the distance of the critical point is 20 km and difference in elevation is 193 m. The over land flow time, is (A) 2 hours (B) 3 hours (C) 2 hours and 30 minutes (D) 4 hours

Description : From the Survey of India map, the distance of the critical point is 20 km and difference in elevation is 193 m. The over land flow time, is (A) 2 hours (B) 3 hours (C) 2 hours and 30 minutes (D) 4 hours

Last Answer : Answer: Option D

A person covered a certain distance by bus at the rate of 40 kmph and walked back to the initial point at the rate of 6 kmph. The whole journey took 13 hours and 48 minutes. What distance did he walk? a) 60km b) 64 km c) 70km d) 72km e) 80 km

Description : A person covered a certain distance by bus at the rate of 40 kmph and walked back to the initial point at the rate of 6 kmph. The whole journey took 13 hours and 48 minutes. What distance did he walk? a) 60km b) 64 km c) 70km d) 72km e) 80 km

Last Answer : Let the distance be x km. then (x/40) + (x/6) = 13 + (48/60) = 69/5 Answer is: d)

Speed of a boat in standing water is 9kmph and the speed of the stream is 1.5kmph. A man rows to a place at a distance of 10.5 km and comes back to the starting point. Find the total time taken by him. A.24 hours B.16 hours C.20 hours D.15 hours

Description : Speed of a boat in standing water is 9kmph and the speed of the stream is 1.5kmph. A man rows to a place at a distance of 10.5 km and comes back to the starting point. Find the total time taken by him. A.24 hours B.16 hours C.20 hours D.15 hours

Last Answer : Answer- A Basic Formula: i. speed = distance traveled / time taken ii. speed of the stream = ½ (a-b) km/hr iii. speed in still water = ½ (a+b) km/hr Explanation: Speed in still water= ½ (a+b) = 9km ... gives a = 10.5km/hr ; b=7.5 kmphr Total time taken by him = 105/10.5 + 105/7.5 = 24 hours

A boat takes 4hours for traveling downstream from point P to point Q and coming back to point P upstream. If the velocity of the stream is 2km ph and the speed of the boat in still water is 4kmph, what is the distance between P and Q? A.9 km B.7 km C.5 km D.6km

Description : A boat takes 4hours for traveling downstream from point P to point Q and coming back to point P upstream. If the velocity of the stream is 2km ph and the speed of the boat in still water is 4kmph, what is the distance between P and Q? A.9 km B.7 km C.5 km D.6km

Last Answer : Answer- D Basic Formula: Speed of stream = ½ (a-b) km/hr Speed of still water = ½ (a+b) km/hr Explanation: Time taken by boat to travel upstream and downstream = 4 hours Velocity of the stream, ½ (a-b) = 2km/hr a ... + x / 6 = 4 3x + x / 6 = 4 4x = 24 so,x = 6 distance between P and Q = 6km

A boat takes 38 hrs for travelling downstream from point p to point q and coming back to a point r midway between p and q. If the velocity of the stream is 8 km/hr and the speed of the boat in still water is 28 km/hr. What is the distance between p and q? A) 720 B) 640 C) 510 D) 450

Description : A boat takes 38 hrs for travelling downstream from point p to point q and coming back to a point r midway between p and q. If the velocity of the stream is 8 km/hr and the speed of the boat in still water is 28 km/hr. What is the distance between p and q? A) 720 B) 640 C) 510 D) 450

Last Answer : ANSWER: A Explanation: Speed downstream = (28 + 8)km/hr = 36 km/hr Speed upstream = (28 – 8)km/hr = 20 km/hr Let the distance between p and q be ‘x’km Then, x/36 + (x/2)/20 = 38 x/36 +x/40 = 38 19x = 13680 X = 720 km Therefore the distance between p and q is 720km

If number of coils are 8 and wire diameter of spring 3mm, then solid length is given by? a) None of the listed b) 27mm c) 24mm d) 21mm

Description : If number of coils are 8 and wire diameter of spring 3mm, then solid length is given by? a) None of the listed b) 27mm c) 24mm d) 21mm

Last Answer : c) 24mm

The angular diameter of the sun is 1920". If the distance of the sun from the earth is `1.5xx10^(11)`m, what is the linear diameter of the sun ?

Description : The angular diameter of the sun is 1920". If the distance of the sun from the earth is `1.5xx10^(11)`m, what is the linear diameter of the sun ?

Last Answer : The angular diameter of the sun is 1920". If the distance of the sun from the earth is `1.5xx10^(11)`m, what is the linear diameter of the sun ?

In the given figure, AB is the diameter and `/_ADC = 2 /_BDC`. If `/_ BCD =70^(@)`, then find the angle made by AC at the centre of the circle.

Description : In the given figure, AB is the diameter and `/_ADC = 2 /_BDC`. If `/_ BCD =70^(@)`, then find the angle made by AC at the centre of the circle.

Last Answer : In the given figure, AB is the diameter and `/_ADC = 2 /_BDC`. If `/_ BCD =70^(@)`, then find the angle made by AC at the centre of the circle.

The excape velocity for the moon is nearly a.5 km/s b.11.2 km/s c.107 dynes d.2.4 km/s e.1.1 km/s

Description : The excape velocity for the moon is nearly a.5 km/s b.11.2 km/s c.107 dynes d.2.4 km/s e.1.1 km/s

Last Answer : d. 2.4 km/s

Find the distance of a heavenly object from the earth if the parallactic angle as measured from two places at a distance of `6.284xx10^(6)m` apart is

Description : Find the distance of a heavenly object from the earth if the parallactic angle as measured from two places at a distance of `6.284xx10^(6)m` apart is

Last Answer : Find the distance of a heavenly object from the earth if the parallactic angle as measured from two places at a ... .284xx10^(6)m` apart is `2^(@)`.

A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant active earth pressure will act at a distance of 2 m above the base and inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Description : A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant ... inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Last Answer : (C) 12°

Draw a circle of diameter 6.4 cm. Then draw two tangents to the circle from a point P at a distance 6.4 cm from the centre of the circle. -Maths 9th

Description : Draw a circle of diameter 6.4 cm. Then draw two tangents to the circle from a point P at a distance 6.4 cm from the centre of the circle. -Maths 9th

Last Answer : clear .

Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls in rotation per second (rps) D = diameter of rolls, m). (A) 3.6 V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Description : Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls ... V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Last Answer : (A) 3.6 V.W.Dr.ρ