Description : ______________ was developed in the year 1996 by ATMEL Corporation A. PIC B. AVR C. ARM D. ASIC
Last Answer : B. AVR
Description : Compare features of PIC and AVR microcontrollers
Last Answer : Parameters PIC AVR Bus width 8/16/32-bit 8/32-bit Communication Protocols UART, USART, LIN, CAN, Ethernet, SPI, I2C UART, USART, SPI, I2C, (special ... Average Atmel Popular Microcontrollers PIC18fXX8, PIC16f88X, PIC32MXX Atmega8, 16, 32, Arduino Community
Description : Which instruction set architecture is used in Raspberry Pi? A. X86 B. MSP C. AVR D. ARM
Last Answer : D. ARM
Description : In microcontrollers, I2C stands for A. Inter-Integrated Clock B. Initial-Integrated Clock C. Intel-Integrated Circuit D. Inter-Integrated Circuit
Last Answer : D. Inter-Integrated Circuit
Description : In microcontrollers, UART is acronym of_____ A. Universal Applied Receiver/Transmitter B. Universal Asynchronous Rectified Transmitter C. Universal Asynchronous Receiver/Transmitter D. United Asynchronous Receiver/Transmitter
Last Answer : C. Universal Asynchronous Receiver/Transmitter
Description : ASIC stands for A. Application-System Integrated Circuits B. Application-Specific Integrated Circuits C. Application-System Internal Circuits D. Application-Specific Internal Circuits
Last Answer : B. Application-Specific Integrated Circuits
Description : ASIC chip is A. Simple in design. B. Manufacturing time is less. C. It is faster. D. Both A&C.
Last Answer : C. It is faster.
Description : Main processor chip in computers is_______ A. ASIC B. ASSP C. CPU D. CPLD
Last Answer : C. CPU
Description : AVR microcontroller executes most of the instruction in _________________. A. Single execution cycle. B. Double execution cycle. C. Both A& B D. None of the above.
Last Answer : architecture of embedded system consists of
Description : AVR stands for_____________________. A. Advanced Virtual RISC. B. Alf-Egil Bogen and Vegard Wollan RISC C. Both A & B D. None of the above
Last Answer : C. Both A & B
Description : ______________ is useful for time-sensitive application that have very small data units to exchange and do not want the overhead of connection setup. A. TCP B. UDP C. Transport layer D. None of the above.
Last Answer : B. UDP
Description : IEEE 802.11 standards provide data rates ______________ A. 10 Gbit/s. B. 1 Gbit/s C. 1 Mb/s to up to 6.75 Gb/s D. 250 Kb/s
Last Answer : C. 1 Mb/s to up to 6.75 Gb/s
Last Answer : You have to understand that a microcontroller is chip enabled in it with a microprocessor.This microprocessor is the one that is programmed by writing a set of instruction( code) in it.The microcontroller is then able to function as required by the user.
Description : ARM processors where basically designed for _______ A. Main frame systems B. Distributed systems C. Mobile systems D. Super computers
Last Answer : C. Mobile systems
Description : The main importance of ARM micro-processors is providing operation with ______ A. Low cost and low power consumption B. Higher degree of multi-tasking C. Lower error or glitches D. Efficient memory management
Last Answer : A. Low cost and low power consumption
Description : ARM stands for _________ A. Advanced RISC Machine B. Advanced RISC Methodology C. Advanced Reduced Machine D. Advanced Reduced Methodology
Last Answer : A. Advanced RISC Machine
Description : ___ layer perform the host addressing and packet routing. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : C. Network layer
Description : IOT devices which have unique identities and can perform ________________________. A. Remote sensing B. Actuating C. Monitoring capabilities D. All of the above
Last Answer : D. All of the above
Description : The process of collecting, organizing and collecting large sets of data called as A. WSN B. Cloud Computing C. Big Data D. None of above
Last Answer : C. Big Data
Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector
Last Answer : b) controller
Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector
Last Answer : B : Controller
Description : Which is the part of Data Link Layer: a. LLC b. MAC c. Both a and b d. None of these
Last Answer : c. Both a and b
Description : Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4
Last Answer : c. IEEE 802.3
Description : Which multiple access technique is used by IEEE 802.11 standard for wireless LAN? a. ALOHA b. CSMA/CA c. CDMA d. none of the mentioned
Last Answer : b. CSMA/CA
Description : MQTT is: a. Based on client-server architecture b. Based on publish-subscribe architecture c. Based on both of the above d. Based on none of the above
Last Answer : b. Based on publish-subscribe architecture
Description : HTTP resources are located by a. unique resource locator b. unique resource identifier c. none of the mentioned d. uniform resource identifier
Last Answer : d. uniform resource identifier
Description : .Frequency band used by 802.11 ah standard is: a. 60 GHz b. 2.4 GHz c. Sub 1 GHz d. 5 GHz
Last Answer : c. Sub 1 GHz
Description : Which layer is called a port layer in OSI model? a. Session b. Application c. Presentation d. Transport
Last Answer : a. Session
Description : Which transport layer protocols is used by DHCP? a. RSVP b. TCP c. DCCP d. UDP
Last Answer : d. UDP
Description : Which one out of these is not a data link layer technology: a. Bluetooth b. UART c. WIFI d. HTTP
Last Answer : d. HTTP
Description : ____ sensor measure heat emitted by objects. A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor
Last Answer : C. IR Sensor
Description : ____ sensor is used for automatic door controls, automatic parking system, automated sinks, automated toilet flushers, hand dryers. A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Motion Sensor
Last Answer : D. Motion Sensor
Description : The measurement of humidity is A. RH B. PH C. IC D. None of aboved
Last Answer : A. RH
Description : ___ sensors include thermocouples, thermistors, resistor temperature detectors (RTDs) and integratd circuits (ICs). A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor
Last Answer : B. Temperature Sensor
Description : ____detect the presence or absence of nearby object without any physical contact. A. Smoke Sensor B. Pressure Sensor C. IR Sensor D. Proximity Sensor
Last Answer : D. Proximity Sensor
Description : ____ is used latching, locking, triggering. A. Solenoid B. Relay C. Linear Actuator D. Servo motors
Last Answer : A. Solenoid
Description : ___ is an open source electronic platform based on easy to used hardware and software. A. Arduino B. Uno C. Raspberry Pi D. Node
Last Answer : A. Arduino
Description : What is the microcontroller used in Arduino UNO? A. ATmega328p B. ATmega2560 C. ATmega32114 D. AT91SAM3x8E
Last Answer : A. ATmega328p
Description : IoT devices are ____ A. Standard B. Non-standard C. Both D. None
Last Answer : B. Non-standard
Description : Properties of IoT devices. A. Sense B. Send and receive data C. Both A and B D. None of above
Last Answer : C. Both A and B
Description : Properties of Arduino are: A. Inexpensive B. Independent C. Simple D. both A and C
Last Answer : D. both A and C
Description : Gas sensors are used to detect _____gases. A. Toxic B. Natural C. Oxygen D. Hydrogen
Last Answer : A. Toxic
Description : Image sensors are found in_______ A. Cameras B. Night-vision equipment C. Sonars D. All of above
Last Answer : D. All of above
Description : Accelerometer sensors are used in______ A. Smartphones B. Aircrafts C. Both D. None of above
Last Answer : C. Both
Description : Solenoid is a specially designed ________ A. Actuator B. Machine C. Electromagnet D. none of above
Last Answer : C. Electromagnet
Description : Linear actuators are used in________ A. Machine tools B. Industrial machinery C.both A and B D.None
Last Answer : A. Machine tools
Description : DC motors converts electrical into ___ energy. A. Mechanical B. Wind C. Electric D. None
Last Answer : A. Mechanical
Description : Stepper motors are_____ A. AC motors B. DC motors C. Electromagnets D. None of above
Last Answer : B. DC motors
Description : Devices that transforms electrical signals into physical movements A. Sensors B. Actuators C. Switches D. Display
Last Answer : B. Actuators
Description : ________ in IoT as one of the key characteristics, devices have different hardware platforms and networks. A. Sensors B. Heterogeneity C. Security D. Connectivity
Last Answer : B. Heterogeneity