Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Which of the basic parts of a robot unit would include the computer circuitry that could be

programmed to determine what the robot would do?

a) sensor

b) controller

c) arm

d) end effector
by

1 Answer

Answer :

b) controller
by

Related questions

Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector

Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? A : Sensor B : Controller C : Arm D : End effector

Last Answer : B : Controller

Which of the following terms IS NOT one of the five basic parts of a robot? a) peripheral tools b) end effectors c) controller d) drive

Description : Which of the following terms IS NOT one of the five basic parts of a robot? a) peripheral tools b) end effectors c) controller d) drive

Last Answer : a) peripheral tools

A robot’s “arm” is also known as its __________ a) end effector b) actuator c) manipulator d) servomechanism

Description : A robot’s “arm” is also known as its __________ a) end effector b) actuator c) manipulator d) servomechanism

Last Answer : c) manipulator

5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movementd. Gripper 4. Delivers commands to the actuators (A) a-1, b-4, c-2, d-3 (B) a-3, b-4, c-2, d-1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Description : 5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movement d. Gripper 4. Delivers commands to the ... -1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Last Answer : B

The number of moveable joints in the base, the arm, and the end effectors of the robot determines_________ a) degrees of freedom b) payload capacity c) operational limits d) flexibility

Description : The number of moveable joints in the base, the arm, and the end effectors of the robot determines_________ a) degrees of freedom b) payload capacity c) operational limits d) flexibility

Last Answer : a) degrees of freedom

Which part of a robot provides motion to the manipulator and end-effectors?  1. Controller  2. Sensor  3. Actuator  4. All of the above

Description : Which part of a robot provides motion to the manipulator and end-effectors?  1. Controller  2. Sensor  3. Actuator  4. All of the above

Last Answer : 3

Which of the following terms refers to the rotational motion of a robot arm? a) swivel b) axle c) retrograde d) roll

Description : Which of the following terms refers to the rotational motion of a robot arm? a) swivel b) axle c) retrograde d) roll

Last Answer : d) roll

The action ‘STACK(A, B)’ of a robot arm specify to _______________ a) Place block B on Block A b) Place blocks A, B on the table in that order c) Place blocks B, A on the table in that order d) Place block A on block B

Description : The action ‘STACK(A, B)’ of a robot arm specify to _______________ a) Place block B on Block A b) Place blocks A, B on the table in that order c) Place blocks B, A on the table in that order d) Place block A on block B

Last Answer : d) Place block A on block B

____ is a collection of mechanical linkage connected by joints a.End effector b.Gripper c.Sensor d.Manipulator

Description : ____ is a collection of mechanical linkage connected by joints a.End effector b.Gripper c.Sensor d.Manipulator

Last Answer : d.Manipulator

____ is a collection of mechanical linkage connected by joints. (A) End effector (B) Gripper (C) Sensor (D) Manipulator

Description : ____ is a collection of mechanical linkage connected by joints. (A) End effector (B) Gripper (C) Sensor (D) Manipulator

Last Answer : D

The speed at which robot is capable of manipulating its end effector is known as the____. a.Velocity of robot b.Maximum reach c.Speed of movement d.Load carrying capacity

Description : The speed at which robot is capable of manipulating its end effector is known as the____. a.Velocity of robot b.Maximum reach c.Speed of movement d.Load carrying capacity

Last Answer : c.Speed of movement

The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Description : The speed at which robot is capable of manipulating its end effector is known as the____. (A) Velocity of robot (B) Maximum reach (C) Speed of movement (D) Load carrying capacity

Last Answer : C

Draw block diagram of Robot system. List function of end effector.

Description : Draw block diagram of Robot system. List function of end effector.

Last Answer : Diagram:  Functions Of An End Effector : 1. End effector is the device at the end of a robotic arm designed to interact with the environment. 2. End effectors originates from ... link of the robot. It is similar to human hand with or without finger. It incorporates various sensors.

The CAI (Computer-Assisted Instruction) technique based on programmed instruction is __________ a) frame-based CAI b) generative CAI c) problem-solving CAI d) intelligent CAI

Description : The CAI (Computer-Assisted Instruction) technique based on programmed instruction is __________ a) frame-based CAI b) generative CAI c) problem-solving CAI d) intelligent CAI

Last Answer : a) frame-based CAI

A basic line following robot is based on __________ a) Strong Artificial Intelligence approach b) Weak Artificial Intelligence approach c) Cognitive Artificial Intelligence approach d) Applied Artificial Intelligence approach

Description : A basic line following robot is based on __________ a) Strong Artificial Intelligence approach b) Weak Artificial Intelligence approach c) Cognitive Artificial Intelligence approach d) Applied Artificial Intelligence approach

Last Answer : b) Weak Artificial Intelligence approach

A data terminal serves as an a. Effector b. sensor c. both a and b d. neither a nor b

Description : A data terminal serves as an a. Effector b. sensor c. both a and b d. neither a nor b

Last Answer : both a and b

If a robot could be programmed to act in a way indistinguishable from human behavior, would you say it has consciousness?

Description : If a robot could be programmed to act in a way indistinguishable from human behavior, would you say it has consciousness?

Last Answer : I’m not yet convinced that a majority of humans is conscious.

If the supply voltage is 220 volts 60 Hz, what is the operating voltage of the motor controller circuitry illustrated? EL-0011 A. 110 volts DC B. 110 volts AC C. 220 volts DC D. 220 volts AC

Description : If the supply voltage is 220 volts 60 Hz, what is the operating voltage of the motor controller circuitry illustrated? EL-0011 A. 110 volts DC B. 110 volts AC C. 220 volts DC D. 220 volts AC

Last Answer : Answer: D

For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? a) three b) four c) six d) eight

Description : For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? a) three b) four c) six d) eight

Last Answer : c) six

What is the name for space inside which a robot unit operates? a) environment b) spatial base c) work envelope d) exclusion zone

Description : What is the name for space inside which a robot unit operates? a) environment b) spatial base c) work envelope d) exclusion zone

Last Answer : c) work envelope

A basic touch screen has three main components. It includes touch sensor, controller and ________ A. transmitter B. receiver C. software driver D. None of the Above

Description : A basic touch screen has three main components. It includes touch sensor, controller and ________ A. transmitter B. receiver C. software driver D. None of the Above

Last Answer : C. software driver

In far from the madding crowd, What if Bathsheba was really an alien-robot who was programmed to fall in love with Gabriel to distract from the pending alien-robot invasion?

Description : In far from the madding crowd, What if Bathsheba was really an alien-robot who was programmed to fall in love with Gabriel to distract from the pending alien-robot invasion?

Last Answer : Oh Dear.

______________ is the smallest microcontrollers which can be programmed to perform a large range of tasks. A. PIC microcontrollers B. ARM microcontrollers C. AVR microcontrollers D. ASIC microcontrollers

Description : ______________ is the smallest microcontrollers which can be programmed to perform a large range of tasks. A. PIC microcontrollers B. ARM microcontrollers C. AVR microcontrollers D. ASIC microcontrollers

Last Answer : A. PIC microcontrollers 

A computer vision technique that relies on image templates is __________ a) edge detection b) binocular vision c) model-based vision d) robot vision

Description : A computer vision technique that relies on image templates is __________ a) edge detection b) binocular vision c) model-based vision d) robot vision

Last Answer : c) model-based vision

The number of moveable joints in the base, the arm, and the end effectors of the robot determines A : degrees of freedom B : payload capacity C : operational limits D : flexibility

Description : The number of moveable joints in the base, the arm, and the end effectors of the robot determines A : degrees of freedom B : payload capacity C : operational limits D : flexibility

Last Answer : A : degrees of freedom

What is used to initiate the perception in the environment? a) Sensor b) Read c) Actuators d) None of the mentioned

Description : What is used to initiate the perception in the environment? a) Sensor b) Read c) Actuators d) None of the mentioned

Last Answer : a) Sensor

Which is used to provide the feedback to the learning element? a) Critic b) Actuators c) Sensor d) None of the mentioned

Description : Which is used to provide the feedback to the learning element? a) Critic b) Actuators c) Sensor d) None of the mentioned

Last Answer : a) Critic

Where does the performance measure is included? a) Rational agent b) Task environment c) Actuators d) Sensor

Description : Where does the performance measure is included? a) Rational agent b) Task environment c) Actuators d) Sensor

Last Answer : b) Task environment

Which were built in such a way that humans had to supply the inputs and interpret the outputs? a) Agents b) AI system c) Sensor d) Actuators

Description : Which were built in such a way that humans had to supply the inputs and interpret the outputs? a) Agents b) AI system c) Sensor d) Actuators

Last Answer : b) AI system

Which depends on the percepts and actions available to the agent? a) Agent b) Sensor c) Design problem d) None of the mentioned

Description : Which depends on the percepts and actions available to the agent? a) Agent b) Sensor c) Design problem d) None of the mentioned

Last Answer : c) Design problem

If a robot can alter its own trajectory in response to external conditions, it is considered to be ____________ a) intelligent b) mobile c) open loop d) non-servo

Description : If a robot can alter its own trajectory in response to external conditions, it is considered to be ____________ a) intelligent b) mobile c) open loop d) non-servo

Last Answer : a) intelligent

If a robot can alter its own trajectory in response to external conditions, it is considered to be __________ a) intelligent b) mobile c) open loop d) non-servo

Description : If a robot can alter its own trajectory in response to external conditions, it is considered to be __________ a) intelligent b) mobile c) open loop d) non-servo

Last Answer : a) intelligent

Which of the following “laws” is Asimov’s first and most important law of robotics? a) robot actions must never result in damage to the robot b) robots must never take actions harmful to humans c) robots must follow the directions given by humans d) robots must make business a greater profit

Description : Which of the following “laws” is Asimov’s first and most important law of robotics? a) robot actions must never result in damage to the robot b) robots must never take actions harmful to humans c) robots must follow the directions given by humans d) robots must make business a greater profit

Last Answer : b) robots must never take actions harmful to humans

Which of the following terms refers to the use of compressed gasses to drive (power) the robot device? a) pneumatic b) hydraulic c) piezoelectric d) photosensitive

Description : Which of the following terms refers to the use of compressed gasses to drive (power) the robot device? a) pneumatic b) hydraulic c) piezoelectric d) photosensitive

Last Answer : a) pneumatic

What is the name for information sent from robot sensors to robot controllers? a) temperature b) pressure c) feedback d) signal

Description : What is the name for information sent from robot sensors to robot controllers? a) temperature b) pressure c) feedback d) signal

Last Answer : c) feedback

A problem solving approach works well for ______________ a) 8-Puzzle problem b) 8-queen problem c) Finding a optimal path from a given source to a destination d) Mars Hover (Robot Navigation)

Description : A problem solving approach works well for ______________ a) 8-Puzzle problem b) 8-queen problem c) Finding a optimal path from a given source to a destination d) Mars Hover (Robot Navigation)

Last Answer : d) Mars Hover (Robot Navigation)

Programming a robot by physically moving it through the trajectory you want it to follow is called _____________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Description : Programming a robot by physically moving it through the trajectory you want it to follow is called _____________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Last Answer : b) continuous-path control

Nils Nilsson headed a team at SRI that created a mobile robot named _____________ a) Robotics b) Dedalus c) Shakey d) Vax

Description : Nils Nilsson headed a team at SRI that created a mobile robot named _____________ a) Robotics b) Dedalus c) Shakey d) Vax

Last Answer : c) Shakey

Programming a robot by physically moving it through the trajectory you want it to follow be called __________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Description : Programming a robot by physically moving it through the trajectory you want it to follow be called __________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Last Answer : b) continuous-path control

What among the following is/are the example of the intelligent agent/agents? a) Human b) Robot c) Autonomous Spacecraft d) All of the mentioned

Description : What among the following is/are the example of the intelligent agent/agents? a) Human b) Robot c) Autonomous Spacecraft d) All of the mentioned

Last Answer : d) All of the mentioned

What part of a floppy disk drive transport contains the circuitry which controls the electromechanical parts of the transport?

Description : What part of a floppy disk drive transport contains the circuitry which controls the electromechanical parts of the transport?

Last Answer : Drive electronics circuit board.

Internal state sensors are used for measuring which of below parameterof the end effector. A : Position B : Position & Velocity C : Velocity & acceleration D : Position, Velocity & acceleration

Description : Internal state sensors are used for measuring which of below parameterof the end effector. A : Position B : Position & Velocity C : Velocity & acceleration D : Position, Velocity & acceleration

Last Answer : D : Position, Velocity & acceleration

- In end effector internal state sensors are used for measuring (A) Position (B) Position & Velocity (C) Velocity & Acceleration (D) Position, Velocity & Acceleration

Description : - In end effector internal state sensors are used for measuring (A) Position (B) Position & Velocity (C) Velocity & Acceleration (D) Position, Velocity & Acceleration

Last Answer : D

What is end effector? Give its classification

Description : What is end effector? Give its classification 

Last Answer : In robotics, an end effector is a device or tool that's connected to the end of a robot arm where the hand would be. The end effector is the part of the robot that interacts with the ... designed. Classification:- i) Mechanical clamping ii) Magnetic clamping iii) Vocum (suction) gripping

Visual clues that are helpful in computer vision include __________ a) color and motion b) depth and texture c) height and weight d) color and motion, depth and texture

Description : Visual clues that are helpful in computer vision include __________ a) color and motion b) depth and texture c) height and weight d) color and motion, depth and texture

Last Answer : d) color and motion, depth and texture

Visual clues that are helpful in computer vision include __________ a) color and motion b) depth and texture c) height and weight d) color and motion, depth and texture

Description : Visual clues that are helpful in computer vision include __________ a) color and motion b) depth and texture c) height and weight d) color and motion, depth and texture

Last Answer : d) color and motion, depth and texture

Drives are also known as A : Sensor B : Controller C : Actuators D : Manipulator

Description : Drives are also known as A : Sensor B : Controller C : Actuators D : Manipulator

Last Answer : C : Actuators

A controller essentially is a A. Sensor B. Clipper C. Comparator D. Amplifier

Description : A controller essentially is a A. Sensor B. Clipper C. Comparator D. Amplifier

Last Answer : C. Comparator

Define sensor, signal conditioner, controller and actuator in mechatronic system.

Description : Define sensor, signal conditioner, controller and actuator in mechatronic system.

Last Answer : Sensor: - A sensor is an element in a measurements system that acquires a physical parameter and changes it into electrical signal. E.g. Bellows, Thermocouple  Signal Conditioners:- The signal ... brains of control system operation and decide the kind of action taken in response to an error

Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Description : Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Last Answer : D : Both option 1 and 2 are true