Description : Given a = i + 2j and b = 2i + j, what are the magnitudes of the two vectors? Are these two vectors equal?
Last Answer : Given \(\overset\rightarrow{a}\) = i + 2j and \(\overset\rightarrow{b}\) = 2i + j, ... magnitudes of the two vectors? Are these two vectors equal?
Description : Two vectors are said to be equal if – (1) only their magnitudes are same (2) only their directions are same (3) both magnitude and direction are same (4) magnitudes are same but directions are opposite
Last Answer : (3) both magnitude and direction are same Explanation: If the magnitude as well as direction of two vectors are equal, then they are known as equal vectors. In other words, two vectors are ... headed towards the same direction. For two equal vectors, their directed line segments must be parallel.
Description : Two vectors are said to be equal if (1) only their magnitudes are same (2) only their directions are same (3) both magnitude and direction are same (4) magnitudes are same but directions are opposite
Last Answer : both magnitude and direction are same
Description : i and j are unit vectors along X-axis and Y-axis respectively. What is the magnitude and direction of the vector i + j and i - j?
Last Answer : i and j are unit vectors along X-axis and Y-axis respectively. What is the magnitude and direction of the ... directions of (i + j) and (i - j)?
Description : The magnitude of vector product of two unit vectors making an angle of 60° with each other is
Last Answer : The magnitude of vector product of two unit vectors making an angle of 60° with each other is (A) 1 (B) 2 (C) 3/2 (D) √3/2
Description : Casual research is 1. Together primary data to shed light on the real nature of the problem 2. to ascertain certain magnitudes 3. to find out cause and effect relationship 4. to explore the gravity of the situation 5. none of these
Last Answer : to find out cause and effect relationship
Description : Two forces have magnitudes of 11 newtons and 5 newtons. The magnitude of their sum could NOT be equal to which of the following values? w) 16 newtons x) 5 newtons y) 9 newtons z) 7 newtons
Last Answer : ANSWER: X -- 5 NEWTONS
Description : Three forces A, B and C of magnitudes 8 N, 12 N and 20 N acting on a particle are in equilibrim. It can be concluded that a.107 dynes b.B and C act in opposite directions c.one of the forces in non-coplaner d.A and B act at 90? e.one of the forces is non-concurrent
Last Answer : b. B and C act in opposite directions
Description : The process of assigning PCM codes to absolute magnitudes A. Overloading B. All of these C. Quantizing D. Multiplexing
Last Answer : C. Quantizing
Description : The minimum number of forces with unequal magnitudes whose vector sum can equal zero is: w) 1 x) 2 y) 3 z) 4
Last Answer : ANSWER: Y -- 3
Description : In an electromagnetic wave, the ratio of the magnitudes of the electric field to the magnet field is equal to what?
Last Answer : ANSWER: THE SPEED OF LIGHT or C
Description : The main advantage of BODE's plot is that multiplication of magnitudes can be converted into : - a) addition b) subtraction c) division d) none of the above
Last Answer : The main advantage of BODE's plot is that multiplication of magnitudes can be converted into : - addition
Description : In a certain three -wire Y -connected generator, the phase voltages are 2 kV. The magnitudes of the line voltages will be: A. 2,000 V B. 6,000 V C. 666 V D. 3,464 V
Last Answer : In a certain three -wire Y -connected generator, the phase voltages are 2 kV. The magnitudes of the line voltages will be: 3,464 V
Description : The resultant of two vectors of magnitude |P| is also |P|. They act at an angle
Last Answer : The resultant of two vectors of magnitude |P| is also |P|. They act at an angle (A) 60° (B) 90° (C) 120° (D) 180°
Description : Find the angle between the vectors A = i + 2j - k and B = -i + j - 2k.
Last Answer : Find the angle between the vectors A = i + 2j - k and B = -i + j - 2k.
Description : he work done of vectors force F and distance d, separated by angle θ can be calculated using, a) Cross product b) Dot product c) Addition of two vectors d) Cannot be calculated
Last Answer : b) Dot product
Description : P = i + 2k and Q = 2i + j -2k are two vectors, find the unit vector parallel to P x Q.
Last Answer : P = i + 2k and Q = 2i + j -2k are two vectors, find the unit vector parallel to P x ... find the vector perpendicular to P and Q of magnitude 6 units.
Description : Find unit vectors perpendicular to the plane of the vectors, A = and B = 2i - k.
Last Answer : Find unit vectors perpendicular to the plane of the vectors, A = and B = 2i - k.
Description : The magnitude of scalar product of two unit vectors perpendicular to each other is
Last Answer : The magnitude of scalar product of two unit vectors perpendicular to each other is (A) zero (B) 1 (C) -1 (D) 2
Description : The vectors of the electromagnetic wave propagation can be expressed in a) Dot product b) Cross product c) Unit vector d) Perpendicular vector
Last Answer : b) Cross product
Description : The variables whose coefficient vectors are unit vectors, are called ...................... a. Unit variables b. Basic variables c. Non-basic variables d. None of these
Last Answer : b. Basic variables
Description : If A = i + 2j + 3k and B = 3i - 2j + k, then the area of parallelogram formed from these vectors as the adjacent sides will be
Last Answer : If A = i + 2j + 3k and B = 3i - 2j + k, then the area of parallelogram formed from these ... units (C) 6√3 square units (D) 8√3 square units
Description : If vectors |A + B| = |A - B| then what can be the angle between A and B ?
Last Answer : If vectors |A + B| = |A - B| then what can be the angle between A and B ?
Description : If vectors A, B, and C are three vectors, then which of the following is not correct?
Last Answer : If vectors A, B, and C are three vectors, then which of the following is not correct? (A) \(\vec{A}.(\ ... \times \vec{B} + \vec{B} \times \vec{C}\)
Description : The two sides of a tringle are increasing at the rate of 1/2 ft/sec with their included angle decreasing at the rate of π/90 rad/sec. What is the rate of change of area when the sides and the included angle are respectively 5 ft,8 ft, and 60°?
Last Answer : Area = (L1 L2) sin(angle) , where L1, L2 and and angle are functions of time t. Take the derivative using the multiplication rule. The derivative will equal (L1L2)(derivative of sin) + sin times ... will have to use the multiplication rule a second time to get the derivative of L1 L2. Good luck.
Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD ... reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90
Last Answer : (D) 90
Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°
Last Answer : Answer: Option B
Description : The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5
Last Answer : Answer: Option C
Description : Clean vectors in Adobe Premiere 5.5?
Last Answer : answer:
Description : Show that vectors a = 2i + 5j - 6k and b = i + 5/2 j - 3k are parallel.
Last Answer : Show that vectors a = 2i + 5j - 6k and b = i + 5/2 j - 3k are parallel.
Description : If `hat(a), hat(b) and hat(c)` are unit vector inclined to each other at an angle of `pi/3` then the absolute value of `[hat(a)+hat(b) hat(b)+hat(c) h
Last Answer : If `hat(a), hat(b) and hat(c)` are unit vector inclined to each other at an angle of `pi/3` then the ... A. `sqrt2` B. `sqrt3` C. `3sqrt2` D. `2sqrt3`
Description : The sides of a quadrilateral ABCD are 6 cm, 8 cm, 12 cm and 14 cm (taken in order), respectively and the angle between the first two sides is a right angle. -Maths 9th
Last Answer : Given ABCD is a quadrilateral having sides AB=6cm, BC=8cm, CD=12cm and DA=14 cm. Now. Join AC. We have, ABC is a right angled triangle at B. Now, AC2=AB2+BC2 [by Pythagoras theorem]Now, AC2=AB2+BC2 ... =24(1+6-√)cm2=24+246=24(1+6)cm2 Hence, the area of quadrilateral is 241+6-√−−−−−−√cm2241+6cm2 .
Description : The side of a quadrilateral ABCD are 6cm,12cm,8cm,12cm,4cm (taken in oder) respectively and the angle between the 1st two side is a right angle. Find area of tiresome by herons fourmula -Maths 9th
Last Answer : Given ABCD is a quadrilateral having sides AB=6cm, BC=8cm, CD=12cm and DA=14 cm. Now. Join AC. We have, ABC is a right angled triangle at B. Now, AC2 =AB2 +BC2 [by Pythagoras theorem] Now, AC2=AB2 ... 1+6-√)cm2 =24+246=24(1+6)cm2 Hence, the area of quadrilateral is 241+6-√−−−−−−√cm2 241+6cm2 .
Last Answer : Given ABCD is a quadrilateral having sides AB = 6 cm, BC = 8 cm, CD = 12 cm and DA = 14 cm. Now, join AC.
Last Answer : This answer was deleted by our moderators...
Description : The total propagation delay time from transmission to reception of signals from a ground transmitter to ground receiver with angle of elevation at 10 degrees respectively is A. 273 ms B. 239 ms C. 275 ms D. 260 ms
Last Answer : A. 273 ms
Description : The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB
Last Answer : A. 403 dB
Description : Half the angle of nip, (α), for a roll crusher is given by (where, dr, dp and df are diameters of crushing rolls, feed particles and rolls gap respectively). (A) cos α = (dr + dp)/(dr + df) (B) cos α = (dr + df)/(dr + dp) (C) tan α = (dr + dp)/(dr + df) (D) sin α = (dr + dp)/(dr + df)
Last Answer : (A) cos α = (dr + dp)/(dr + df)
Description : In the following diagram, the path of a ray of light passing through a glass prism is shown: In this diagram the angle of incidence, the angle of emergence and the angle of deviation respectively are (select the correct option): (a) X, R and T (b) Y, Q and T (c) X, Q and P (d) Y, Q and P
Last Answer : (d) Y, Q and P
Description : The critical angle for two media with permittivities of 16 and 9 respectively is a) 48.59 b) 54.34 c) 60 d) 45
Last Answer : a) 48.59
Description : The critical angle for two media of refractive indices of medium 1 and 2 given by 2 and 1 respectively is a) 0 b) 30 c) 45 d) 60
Last Answer : b) 30
Description : Calculate the ratio of sine of incident angle to the sine of reflected angle when the refractive indices of medium 1 and 2 are given as 2.33 and 1.66 respectively. a) 0.71 b) 1.4 c) 2 d) 3.99
Last Answer : a) 0.71
Description : The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is (A) 18° 15' E (B) 18° 15' N (C) 18° 15' W (D) 18° 15' L
Last Answer : (D) 18° 15' L
Description : The flow of water after spilling over the weir crest in chute spillway and side channel spillway respectively are (A) At right angle and parallel to weir crest (B) Parallel and at right angle to weir crest (C) Parallel to weir crest in both (D) At right angle to weir crest in both
Last Answer : Answer: Option A
Description : How can we derive the expression for cross product of two vectors?
Last Answer : Here is a video that shows where the term cross comes from. Two vectors in a 3D space when “multiplied” by each other result in a third vector that represents how they “cross” each other.
Description : The degree of the B-spline with varying knot vectors a.Increases with knot vectors b.Decreases with knot vectors c.Remains constant d.none of the above
Last Answer : a.Increases with knot vectors
Description : What are the commonly used vectors for genetic engineering? -Biology
Description : What are the commonly used vectors for transformation in plant cells? -Biology
Description : Why are cloning vectors necessary in cloning? -Biology
Description : How bacteriophages are used as vectors? -Biology