The flow of water after spilling over the weir crest in chute spillway and side channel spillway respectively are (A) At right angle and parallel to weir crest (B) Parallel and at right angle to weir crest (C) Parallel to weir crest in both (D) At right angle to weir crest in both

The flow of water after spilling over the weir crest in chute spillway and side channel spillway
respectively are
(A) At right angle and parallel to weir crest
(B) Parallel and at right angle to weir crest
(C) Parallel to weir crest in both
(D) At right angle to weir crest in both
by

1 Answer

Answer :

Answer: Option A
by

Related questions

Which of the following spillways is least suitable for an earthen dam? (A) Ogee spillway (B) Chute spillway (C) Side channel spillway (D) Shaft spillway

Description : Which of the following spillways is least suitable for an earthen dam? (A) Ogee spillway (B) Chute spillway (C) Side channel spillway (D) Shaft spillway

Last Answer : Answer: Option A

In a chute spillway, the flow is usually (A) Uniform (B) Subcritical (C) Critical (D) Super critical

Description : In a chute spillway, the flow is usually (A) Uniform (B) Subcritical (C) Critical (D) Super critical

Last Answer : Answer: Option D

m and n are monsoon duration factor and catchment factor respectively. If P is yearly rainfall in cm, runoff can be calculated by (A) Velocity area method (B) Weir or spillway method (C) Use of venturi-meter (D) Using power plant consumption

Description : m and n are monsoon duration factor and catchment factor respectively. If P is yearly rainfall in  cm, runoff can be calculated by  (A) Velocity area method  (B) Weir or spillway method  (C) Use of venturi-meter  (D) Using power plant consumption 

Last Answer : (A) Velocity area method 

In case of non-availability of space due to topography, the most suitable spillway is (A) Straight drop spillway (B) Shaft spillway (C) Chute spillway (D) Ogee spillway

Description : In case of non-availability of space due to topography, the most suitable spillway is (A) Straight drop spillway (B) Shaft spillway (C) Chute spillway (D) Ogee spillway

Last Answer : Answer: Option B

Most important method for calculating discharge for planning a water supply project, is (A) Velocity area method (B) Weir or spillway method (C) Use of venturi-meter (D) Using power plant consumption

Description : Most important method for calculating discharge for planning a water supply project, is  (A) Velocity area method  (B) Weir or spillway method  (C) Use of venturi-meter  (D) Using power plant consumption 

Last Answer : (A) Velocity area method

A weir, generally, used as a spillway of a dam is (A) Narrow crested weir (B) Broad crested weir (C) Ogee weir (D) Submerged weir

Description : A weir, generally, used as a spillway of a dam is (A) Narrow crested weir (B) Broad crested weir (C) Ogee weir (D) Submerged weir

Last Answer : Answer: Option C

The top of the weir over which the water flows is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of these

Description : The top of the weir over which the water flows is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of these

Last Answer : Answer: Option A

The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of approach) (A) (2/3) Cd × L. 2g [H1 - Ha] (B) (2/3) Cd × L. 2g [H1 3/2 - Ha 3/2] (C) (2/3) Cd × L. 2g [H1 2 - Ha 2 ] (D) (2/3) Cd × L. 2g [H1 5/2 - Ha 5/2]

Description : The discharge over a rectangular weir, considering the velocity of approach, is (whereH1 = H + Ha = Total height of water above the weir, H = Height of water over the crest of the weir, and Ha = Height of water due to velocity of ... 2g [H1 2 - Ha 2 ] (D) (2/3) Cd L. 2g [H1 5/2 - Ha 5/2]

Last Answer : Answer: Option B

4 The sheet of water flowing over a notch or a weir is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of thes

Description : 4 The sheet of water flowing over a notch or a weir is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of thes

Last Answer : Answer: Option B

The upper surface of a weir over which water flows is known is (A) Crest (B) Nappy (C) Sill (D) Weir top

Description : The upper surface of a weir over which water flows is known is (A) Crest (B) Nappy (C) Sill (D) Weir top

Last Answer : Answer: Option C

13. In a sharp-crested weir, the thickness of the weir is kept less than half of the height of water above the crest of the weir. A) True B) False

Description : 13. In a sharp-crested weir, the thickness of the weir is kept less than half of the height of water above the crest of the weir. A) True B) False

Last Answer : A

A weir is said to be broad crested weir, if the width of the crest of the weir is ________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Description : A weir is said to be broad crested weir, if the width of the crest of the weir is ________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option C

A weir is said to be narrow-crested weir, if the width of the crest of the weir is __________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Description : A weir is said to be narrow-crested weir, if the width of the crest of the weir is __________ half the height of water above the weir crest. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option B

As compared to crest of the normal portion of the weir, the crest of the under sluice portion of weir is kept at (A) Lower level (B) Higher level (C) Same level (D) Any of the above depending on the design

Description : As compared to crest of the normal portion of the weir, the crest of the under sluice portion of weir is kept at (A) Lower level (B) Higher level (C) Same level (D) Any of the above depending on the design

Last Answer : Answer: Option A

divide wall is provided (A) At right angle to the axis of weir (B) Parallel to the axis of weir and upstream of it (C) Parallel to the axis of weir and downstream of it (D) At an inclination to the axis of weir

Description : divide wall is provided (A) At right angle to the axis of weir (B) Parallel to the axis of weir and upstream of it (C) Parallel to the axis of weir and downstream of it (D) At an inclination to the axis of weir

Last Answer : Answer: Option A

Flow measurement in an open channel is done by a/an (A) Venturimeter (B) Orificemeter (C) Weir (D) Rotameter

Description : Flow measurement in an open channel is done by a/an (A) Venturimeter (B) Orificemeter (C) Weir (D) Rotameter

Last Answer : (C) Weir

A control meter is preferred to a weir because (A) It measures the discharge even in silt Leiden streams (B) The velocity of approach of the channel increases above the control, and thus removes the silt completely (C) It is not damaged by floating debris (D) All the above

Description : A control meter is preferred to a weir because (A) It measures the discharge even in silt Leiden streams (B) The velocity of approach of the channel increases above the control, and thus removes the silt completely (C) It is not damaged by floating debris (D) All the above

Last Answer : Answer: Option D

Coefficient of discharge of an ogee spillway (A) Depends on depth of approach and upstream slope (B) Depends on downstream apron interference and downstream submergence (C) Remains constant (D) Both (A) and (B

Description : Coefficient of discharge of an ogee spillway (A) Depends on depth of approach and upstream slope (B) Depends on downstream apron interference and downstream submergence (C) Remains constant (D) Both (A) and (B

Last Answer : Answer: Option D

Crop factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder types c) Cylinder speed, feed rate d) Cylinder type, feed rate

Description : Crop factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder types c) Cylinder speed, feed rate d) Cylinder type, feed rate

Last Answer : Variety of crop, Moisture in crop material

Operational factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Description : Operational factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Last Answer : Cylinder speed, feed rate

Machine factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Description : Machine factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Last Answer : Feeding chute angle, cylinder type

In a broad-crested weir, the discharge is maximum if the head of water on the downstream side of weir is __________ the head of water on the upstream side of weir. (A) Equal to (B) One-third (C) Two-third (D) Three-fourth

Description : In a broad-crested weir, the discharge is maximum if the head of water on the downstream side of weir is __________ the head of water on the upstream side of weir. (A) Equal to (B) One-third (C) Two-third (D) Three-fourth

Last Answer : Answer: Option C

When the water level on the downstream side of a weir is above the top surface of a weir, the weir is known as (A) Narrow-crested weir (B) Broad-crested weir (C) Ogee weir (D) Submerged weir

Description : When the water level on the downstream side of a weir is above the top surface of a weir, the weir is known as (A) Narrow-crested weir (B) Broad-crested weir (C) Ogee weir (D) Submerged weir

Last Answer : Answer: Option D

The main function of a divide wall is to (A) Control the silt entry in the canal (B) Prevent river floods from entering the canal (C) Separate the under-sluices from weir proper (D) Provide smooth flow at sufficiently low velocity

Description : The main function of a divide wall is to (A) Control the silt entry in the canal (B) Prevent river floods from entering the canal (C) Separate the under-sluices from weir proper (D) Provide smooth flow at sufficiently low velocity

Last Answer : Answer: Option C

An opening in the side of a tank or vessel such that the liquid surface with the tank is below the top edge of the opening, is called (A) Weir (B) Notch (C) Orifice(D) None of these

Description : An opening in the side of a tank or vessel such that the liquid surface with the tank is below the top edge of the opening, is called (A) Weir (B) Notch (C) Orifice (D) None of these

Last Answer : Answer: Option B

A weir is used to measure the large water discharge rate from a river or from an open channel. A weir is not of __________ shape. (A) Circular (B) Rectangular (C) Triangular (D) Trapezoidal

Description : A weir is used to measure the large water discharge rate from a river or from an open channel. A weir is not of __________ shape. (A) Circular (B) Rectangular (C) Triangular (D) Trapezoidal

Last Answer : (A) Circular

For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD' and AD' when measured were 4 cm, 3 cm and 5 cm respectively. The angle between the reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90

Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined  and produced to intersect the load line at D and a line parallel to the load line through A at D'.  Distances AD, DD ... reactions at A and B is  (A) 30°  (B) 45°  (C) 60°  (D) 90

Last Answer : (D) 90

The instances in which the MO receipt is treated as spoiled are when a) There is an error in any of the entries requiring correction b) When the receipt is disfigured due to spilling of ink etc c) A receipt is inadvertently passed over and left blank and noticed at close of the day d) All the above

Description : The instances in which the MO receipt is treated as spoiled are when a) There is an error in any of the entries requiring correction b) When the receipt is disfigured due to spilling of ink etc c) A receipt is inadvertently passed over and left blank and noticed at close of the day d) All the above

Last Answer : d) All the above

Generally the weir is aligned at right angles to the direction of the main river current because (A) It ensures less length of the weir (B) It gives better discharging capacity (C) It is economical (D) All of the above

Description : Generally the weir is aligned at right angles to the direction of the main river current because (A) It ensures less length of the weir (B) It gives better discharging capacity (C) It is economical (D) All of the above

Last Answer : Answer: Option D

In a group housing project, it is proposed to use pre-fabricated RCC beams and columns. The most useful construction equipment is (a) Derrick Crane (b) Chute (c) Weigh Batcher (d) Transit Mixer

Description : In a group housing project, it is proposed to use pre-fabricated RCC beams and columns. The most useful construction equipment is (a) Derrick Crane (b) Chute (c) Weigh Batcher (d) Transit Mixer

Last Answer : (a) Derrick Crane

09. According to Bazin, the coefficient of discharge varies with the height of water over the sill of a weir. A) Correct B) Incorrect

Description : 09. According to Bazin, the coefficient of discharge varies with the height of water over the sill of a weir. A) Correct B) Incorrect

Last Answer : A

A structure used to dam up a stream or river over which the water flows is called (A) Orifice (B) Notch (C) Weir (D) Dam

Description : A structure used to dam up a stream or river over which the water flows is called (A) Orifice (B) Notch (C) Weir (D) Dam

Last Answer : Answer: Option C

Is there any way to save an '05 MacBook after spilling hot cocoa on it?

Description : Is there any way to save an '05 MacBook after spilling hot cocoa on it?

Last Answer : Not the hardware, possibly the harddrive though. You would have to take it in to have it looked at.

06. The formula for discharge over a sharp-crested weir and Ogee weir is same as that of a rectangular weir. A) Agree B) Disagree

Description : 06. The formula for discharge over a sharp-crested weir and Ogee weir is same as that of a rectangular weir. A) Agree B) Disagree

Last Answer : A

The Francis formula for the discharge over Cipoletti weir is (A) 1.84 LH1/2 (B) 1.84 LH (C) 1.84 LH3/2 (D) 1.84 LH5/

Description : The Francis formula for the discharge over Cipoletti weir is (A) 1.84 LH1/2 (B) 1.84 LH (C) 1.84 LH3/2 (D) 1.84 LH5/

Last Answer : Answer: Option C

According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Description : According to Bazin's formula, the discharge over a rectangular weir is mL2g x H 3/2where m is equal to (A) 0.405 + (0.003/H) (B) 0.003 + (0.405/H) (C) 0.405 + (H/0.003) (D) 0.003 + (H/0.405)

Last Answer : Answer: Option A

When the coefficient of discharge (Cd) is 0.623, then the general equation for discharge over a rectangular weir is (A) 1.84(L - 0.1nH)H 3/2 (B) 1.84(L - nH)H 2 (C) 1.84(L - 0.1nH)H 5/2 (D) 1.84(L - nH)H 3

Description : When the coefficient of discharge (Cd) is 0.623, then the general equation for discharge over a rectangular weir is (A) 1.84(L - 0.1nH)H 3/2 (B) 1.84(L - nH)H 2 (C) 1.84(L - 0.1nH)H 5/2 (D) 1.84(L - nH)H 3

Last Answer : Answer: Option A

The length of a liquid stream while flowing over a weir __________ at the ends of the sill. (A) Expands (B) Does not change (C) Contracts (D) None of these

Description : The length of a liquid stream while flowing over a weir __________ at the ends of the sill. (A) Expands (B) Does not change (C) Contracts (D) None of these

Last Answer : Answer: Option C

The maximum discharge over a broad crested weir is (A) 0.384 Cd × L × H1/2 (B) 0.384 Cd × L × H3/2 (C) 1.71 Cd × L × H1/(D) 1.71 Cd × L × H 3/

Description : The maximum discharge over a broad crested weir is (A) 0.384 Cd × L × H1/2 (B) 0.384 Cd × L × H3/2 (C) 1.71 Cd × L × H1/ (D) 1.71 Cd × L × H 3/

Last Answer : Answer: Option D

The absolute percentage error in the computed discharge over a rectangular weir corresponding to an absolute error of 1.5 % in the measurement of head over the sill of the weir would be : (a) 1.5 (b) 2.25 (c) 2.5 (d) 3.75

Description : The absolute percentage error in the computed discharge over a rectangular weir corresponding to an absolute error of 1.5 % in the measurement of head over the sill of the weir would be : (a) 1.5 (b) 2.25 (c) 2.5 (d) 3.75

Last Answer : (b) 2.25

An error of 1% in measuring head over the crest of the notch (H) will produce an error of __________ in discharge over a triangular notch, (A) 1 % (B) 1.5 % (C) 2 % (D) 2.5 %

Description : An error of 1% in measuring head over the crest of the notch (H) will produce an error of __________ in discharge over a triangular notch, (A) 1 % (B) 1.5 % (C) 2 % (D) 2.5 %

Last Answer : Answer: Option D

The side of a quadrilateral ABCD are 6cm,12cm,8cm,12cm,4cm (taken in oder) respectively and the angle between the 1st two side is a right angle. Find area of tiresome by herons fourmula -Maths 9th

Description : The side of a quadrilateral ABCD are 6cm,12cm,8cm,12cm,4cm (taken in oder) respectively and the angle between the 1st two side is a right angle. Find area of tiresome by herons fourmula -Maths 9th

Last Answer : Given ABCD is a quadrilateral having sides AB=6cm, BC=8cm, CD=12cm and DA=14 cm. Now. Join AC. We have, ABC is a right angled triangle at B. Now, AC2 =AB2 +BC2 [by Pythagoras theorem] Now, AC2=AB2 ... 1+6-√)cm2 =24+246=24(1+6)cm2 Hence, the area of quadrilateral is 241+6-√−−−−−−√cm2 241+6cm2 .

The side of a quadrilateral ABCD are 6cm,12cm,8cm,12cm,4cm (taken in oder) respectively and the angle between the 1st two side is a right angle. Find area of tiresome by herons fourmula -Maths 9th

Description : The side of a quadrilateral ABCD are 6cm,12cm,8cm,12cm,4cm (taken in oder) respectively and the angle between the 1st two side is a right angle. Find area of tiresome by herons fourmula -Maths 9th

Last Answer : This answer was deleted by our moderators...

Best side slope for most economical trapezoidal section in open channel flow, wherein side slopes are defined by : X horizontal to 1 vertical, is when X equals : (a) 0.404 (b) 0.500 (c) 0.577 (d) 0.673

Description : Best side slope for most economical trapezoidal section in open channel flow, wherein side slopes are defined by : X horizontal to 1 vertical, is when X equals : (a) 0.404 (b) 0.500 (c) 0.577 (d) 0.673

Last Answer : (c) 0.577

A magician, had a water glass that was filled to the top. Holding the glass above his head he let it drop to the carpet without spilling a single drop of water. How could he manage to drop the glass from a height of six feet and not spill any water? -Riddles

Description : A magician, had a water glass that was filled to the top. Holding the glass above his head he let it drop to the carpet without spilling a single drop of water. How could he manage to drop the glass from a height of six feet and not spill any water? -Riddles

Last Answer : The glass was filled, but not with water.

A sheet of paper can be pulled out quickly from under a glass of water without spilling the water. This phenomenon illustrates (a) lack of friction between paper and glass (b) newton’s third law of motion (c) inertia (d) acceleration

Description : A sheet of paper can be pulled out quickly from under a glass of water without spilling the water. This phenomenon illustrates (a) lack of friction between paper and glass (b) newton’s third law of motion (c) inertia (d) acceleration

Last Answer : Ans:(c)

The most suitable flow measuring device for the fluid flow measurement in a very large diameter pipeline is a (A) Weir(B) Pitot tube(C) Kennison nozzle(D) V-notch

Description : The most suitable flow measuring device for the fluid flow measurement in a very large diameter pipeline is a (A) Weir (B) Pitot tube (C) Kennison nozzle (D) V-notch

Last Answer : (B) Pitot tube

How did the Mexican oil spilling in 2010 affect fishing?

Description : How did the Mexican oil spilling in 2010 affect fishing?

Last Answer : answer:GQ. Let's see. There's the Dept of Interior repprt, the ongoing NOAA assessments, the University of South Florida semi-annual reports, I think the Scripts Institute has an investigation report, ... a living. There is disagreement and controdiction among all the assessors. It's all on the net.

Has something in the law changed since the woman won her case about spilling hot coffee on her lap?

Description : Has something in the law changed since the woman won her case about spilling hot coffee on her lap?

Last Answer : answer:What is it that we are supposed to learn from this story? The story has been used as “proof” that litigation is out of control because someone simply spilled coffee on herself. If she suffered serious injury, it’s a different story.

How do people in cafés carry coffees without spilling them?

Description : How do people in cafés carry coffees without spilling them?

Last Answer : They walk very very carefully.