Description : Adsorption of a gas on a surface follows Freundlich adsorption isotherm. Plot of `"log " (x)/(m)` versus log P gives a straight line with slope equal
Last Answer : Adsorption of a gas on a surface follows Freundlich adsorption isotherm. Plot of `"log " (x ... of pressure. D. Adsorption is independent of pressure.
Description : For a linear plot of log(x/m) versus log p in a Freundlich adsorption isotherm, which of the following statements is correct ? (k and n are constants)
Last Answer : For a linear plot of log(x/m) versus log p in a Freundlich adsorption isotherm, which of the following ... Both k and 1/n appear in the slope term.
Description : Which of the following curves shows the effect of temperature on the extent of gas-solid adsorption at a given pressure? (A) Langmuir adsorption isotherm (B) Adsorption isobar (C) Freundlich adsorption isotherm (D) None of these
Last Answer : (B) Adsorption isobar
Description : An adsorption isotherm equation proposed by Langmuir is of the form `V = (V_(0)bPO)/((1 + bP))` where V is the volume of gas adsorbed at pressure P. F
Last Answer : An adsorption isotherm equation proposed by Langmuir is of the form `V = (V_(0)bPO)/((1 + bP))` where V is ... of V on P can be depicted as B. C. D.
Description : The change in enthalpy per unit weight of adsorbed gas when adsorbed on gas free or "outgassed" adsorbent to from a definite concentration of adsorbate is called its (A) Integral heat of adsorption (B) Heat of wetting (C) Differential heat of adsorption (D) Heat of normal condensation
Last Answer : (A) Integral heat of adsorption
Description : The change in enthalpy, when a unit quantity of gas is absorbed by relatively large quantity of adsorbent (on which a definite concentration of the adsorbed gas already exists) is termed as the (A) ... (B) Heat of wetting (C) Integral heat of adsorption (D) None of these
Last Answer : (A) Differential heat of adsorption
Description : According to Freundlich adsorption isotherm, which of the following is correct ?
Last Answer : According to Freundlich adsorption isotherm, which of the following is correct ? A. `(x)/(m ... the above are correct for different ranges of pressure
Description : According to Freundlich adsorption isotherm, which of the following is correct?
Last Answer : According to Freundlich adsorption isotherm, which of the following is correct? A. `(x)/(m) ... the above are correct for different ranges of pressure
Description : Freundlich adsorption isotherm, with the help of a graph.
Last Answer : Explain the following : Freundlich adsorption isotherm, with the help of a graph.
Description : Write an equation for Freundlich adsorption isotherm.
Last Answer : Write an equation for Freundlich adsorption isotherm.
Description : 10. In Freundlich Adsorption isotherm, the value of 1/n is: (1) 1 in case of chemisorption (2) between 0 and 1 in all cases (3) between 2 and 4 in all cases (4) 1 in case of physical adsorption
Last Answer : between 0 and 1 in all cases
Description : Which of the following assumptions of Freunlich adsorption isotherm is incorrect? (a) The constants are temperature dependent (b) It is valid over a range of pressure only (c) Adsorption ... equation is purely an empirical equation (d) The adsorbed molecules may be multimolecular in thickness
Last Answer : (d) The adsorbed molecules may be multimolecular in thickness
Description : At a given equilibrium pressure, with increase in temperature, the concentration of adsorbed gas on solid adsorbent (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially
Last Answer : (B) Decreases
Description : B.E.T. method of finding out surface area of a catalyst, uses the extension of __________ isotherm. (A) Langmuir (B) Freundlich (C) Tempkin (D) None of these
Last Answer : (A) Langmuir
Description : If x gram of gas is adsobed by m gram of adsorbent at pressure P the plot of log `(x)/(m)` versus log P is linear .the slope of the plot is : (n and k
Last Answer : If x gram of gas is adsobed by m gram of adsorbent at pressure P the plot of log `(x)/(m)` versus log P is linear ... 2 k` B. log k C. n D. `(1)/(n)`
Description : If `x` is the amount of adsorbate and `m` is the amount of adsorbent, which of the following relation is related to adsorption process?
Last Answer : If `x` is the amount of adsorbate and `m` is the amount of adsorbent, which of the following relation is related to ... (x/m) D. `(x)/(m)= p xx T`
Description : Pick out the wrong statement. Generally for physical adsorption, a gas of (A) Higher molecular weight is adsorbed in preference to a gas of low molecular weight (B) High critical temperature ... volatility is adsorbed in preference to a gas of high volatility (D) None of these
Last Answer : (D) None of these
Description : __________ is concerned with the adsorption equilibria. (A) Fick's law (B) Gibb's equation (C) Freundlich equation (D) None of these
Last Answer : (C) Freundlich equation
Description : Freundlich equation applies to the adsorption of solute from (A) Dilute solutions, over a small concentration range (B) Gaseous solutions at high pressure (C) Concentrated solutions (D) None of these
Last Answer : (A) Dilute solutions, over a small concentration range
Description : Assertion(A): Physical adsorption of molecules on the surface requires activation energy. Reason(R): Because the bonds of adsorbed molecules are broke
Last Answer : Assertion(A): Physical adsorption of molecules on the surface requires activation energy. Reason(R): ... D. If both Assertion & Reason are False.
Description : In Langmuir treatment of adsorption, (A) Whole surface of the catalyst does not have the same activity for adsorption and there is attraction between the adsorbed molecule (B) Whole surface of ... same mechanism (D) Extent of adsorption is more than one complete monomolecular layer on the surface
Last Answer : (B) Whole surface of the catalyst is essentially uniform and the adsorbed molecule has no effect on the rate of adsorption per site
Description : Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates ... (except the first one) is involved in each of the evaporation process (D) None of these
Last Answer : (B) There is no dynamic equilibrium between successive layer
Description : In frenudlich adsorption isotherm, the value of `1//n` is
Last Answer : In frenudlich adsorption isotherm, the value of `1//n` is A. 1 in case of physical adsorption B. 1 in ... in all case D. between 2 and 4 in all cases
Description : The Langmuir adsorption isotherm is deduced using the assumption.
Last Answer : The Langmuir adsorption isotherm is deduced using the assumption. A. The adsorption isotherm is ... D. The adsorption takes place in multilayers.
Description : What is the adsorption Isotherm?
Last Answer : What is the adsorption Isotherm?
Description : As complete saturation of an adsorbent is approached, the differential heat of adsrop-tion approaches (A) That of normal condensation (B) Integral heat of adsorption (C) Zero (D) None of these
Last Answer : (A) That of normal condensation
Description : The mass of argon adsorbed per unit mass of carbon surface is plotted against pressure. Which of the following plots is correct if x and m represent t
Last Answer : The mass of argon adsorbed per unit mass of carbon surface is plotted against pressure. Which of the ... Represents extrapolated data) A. B. C. D.
Description : The ease of adsorption of the hydrated alkali metal ions on ion-exchange resins follows the order:
Last Answer : The ease of adsorption of the hydrated alkali metal ions on ion-exchange resins follows the order: A. `K^(+)lt Na + ... (+)lt K^(+)lt Na^(+)lt Li^(+)`
Description : When acetone is added in a two layer mixture of methyl isobutyl ketone and water at 30°C, the acetone distributes between the two layers and the composition of the layer follows two solubility curves. For this system ... at the concentration of the plait point (D) All (A), (B) and (C
Last Answer : (D) All (A), (B) and (C
Description : At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room ... which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0
Last Answer : (C) 0.4
Description : If the radius of blood vessels decrease, what will be in the blood pressur? -Do You Know?
Last Answer : answer:
Description : Partial pressur eof oxygen in alveoli , atmospheric air and tissue will be
Last Answer : Partial pressur eof oxygen in alveoli , atmospheric air and tissue will be A. 40,159,45 B. 40,0.3,45 C. 104,159,40 D. 104,0.3,45
Description : If the radius of blood vessels decrease,what will be in the blood pressur?
Last Answer : Increase
Description : the radius of blood vessels decrease,what will be in the blood pressur?
Description : I'm looking for a thriller/mystery/suspense book which follows the "And Then There Were None" plot style.
Last Answer : I am reading the book The Missing by Kiersten Modglin which seems to be going in that direction. 5 strangers end up on a deserted island and they don't know why they are there and don't trust each other ... only about 100 pages into it, but I think this may be the type of book you are looking for.
Description : The line on a map connecting points of equal temperature at a given time is – (1) Isohyet (2) Isobar (3) Isthumus (4) Isotherm
Last Answer : (4) Isotherm Explanation: An isotherm is a line that connects points on a map that have the same temperature. Therefore, all points through which an isotherm passes have the same or ... Generally, isotherms representing 5°C or 10°F temperature differences are used, but any interval may be chosen.
Description : The line on a map connecting points of equal temperature at a given time is (1) Isohyet (2) Isobar (3) Isthumus (4) Isotherm
Last Answer : Isotherm
Description : Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant? (A) Silica gel (B) Diatomaceous earth (C) Basalt (D) Bog iron (i.e., moist ferric hydroxide)
Last Answer : (D) Bog iron (i.e., moist ferric hydroxide)
Description : Which of the following is an adsorbent for removal of nitrogen oxides from gas/air? (A) Active carbon (B) Silica gel (C) Bog iron (iron oxide) (D) Pulverised limestone
Last Answer : (B) Silica gel
Description : Which of the following is an adsorbent used for the removal of SO2 from gas/air? (A) Bog iron (B) Limestone powder or alkalised alumina (C) Silica gel (D) Active carbon
Last Answer : (B) Limestone powder or alkalised alumina
Description : With the lowering of equilibrium pressure, at a given temperature, the amount of adsorbate on the adsorbent (A) Increases (B) Decreases (C) Remain same (D) Either (A) or (B), depends on the system
Description : Mass flow of granular solid (M) through a circular opening of dia, D follows (A) M ∝ √D (B) M ∝ D2 (C) M ∝ D3 (D) M ∝ D
Last Answer : (C) M ∝ D
Description : When `O_(2)` is adsorbed on a metallic surface, electron transfer electron transfer occurs from the metal to `O_(2).` The TRUE statement (s) regarding
Last Answer : When `O_(2)` is adsorbed on a metallic surface, electron transfer electron transfer occurs from the metal ... D. bong length of `O_(2)` is increased
Description : Methylene blue, from its aqueous solution, is adsorbed on activated charcoal at `25^(@) C`. For this process, the correct statement is
Last Answer : Methylene blue, from its aqueous solution, is adsorbed on activated charcoal at `25^(@) C` ... of temperature. D. The adsorption is irreversible.
Description : Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the ... (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity
Last Answer : (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity
Description : Which will be adsorbed more readily on the surface of charcoal and why NH3 or CO2?
Last Answer : Ans: The critical temperature NH3 is more CO2, therefore NH3 is liquefied more easily than CO2. Hence NH3 has higher intermolecular forces of attraction and hence it adsorbed more readily.
Description : Out of CO and NH3 which is adsorbed on activated charcoal to a large extent and why ?
Last Answer : Ans. Ammonia; because more easily liquefiable gas undergoes adsorption to a greater extent.
Description : Isotherm on an enthalpy-concentration diagram, for an ideal solution will be a (A) Straight line (B) Sine curve (C) Parabola (D) Hyperbola
Last Answer : (A) Straight line
Description : The formation of pockets of gas in a liquid is called: w) absorption x) cavitation y) adsorption z) dissolving
Last Answer : ANSWER: X -- CAVITATION