Description : Which of the following assumptions of Freunlich adsorption isotherm is incorrect? (a) The constants are temperature dependent (b) It is valid over a range of pressure only (c) Adsorption ... equation is purely an empirical equation (d) The adsorbed molecules may be multimolecular in thickness
Last Answer : (d) The adsorbed molecules may be multimolecular in thickness
Description : Which of the following curves shows the effect of temperature on the extent of gas-solid adsorption at a given pressure? (A) Langmuir adsorption isotherm (B) Adsorption isobar (C) Freundlich adsorption isotherm (D) None of these
Last Answer : (B) Adsorption isobar
Description : In Langmuir treatment of adsorption, (A) Whole surface of the catalyst does not have the same activity for adsorption and there is attraction between the adsorbed molecule (B) Whole surface of ... same mechanism (D) Extent of adsorption is more than one complete monomolecular layer on the surface
Last Answer : (B) Whole surface of the catalyst is essentially uniform and the adsorbed molecule has no effect on the rate of adsorption per site
Description : Adsorption of a gas follows Freundlich adsorption isotherm. In the given plot, x is the mass of the gas adsorbed on mass m of the adsorbent at pressur
Last Answer : Adsorption of a gas follows Freundlich adsorption isotherm. In the given plot, x is the mass of the gas adsorbed on mass m ... p^(1//2)` D. `p^(1//4)`
Description : The Langmuir adsorption isotherm is deduced using the assumption.
Last Answer : The Langmuir adsorption isotherm is deduced using the assumption. A. The adsorption isotherm is ... D. The adsorption takes place in multilayers.
Description : Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates ... (except the first one) is involved in each of the evaporation process (D) None of these
Last Answer : (B) There is no dynamic equilibrium between successive layer
Description : Langmuir equation is associated with (A) Leaching (B) Adsorption (C) Steam distillation (D) Multi-component absorption
Last Answer : (B) Adsorption
Description : B.E.T. method of finding out surface area of a catalyst, uses the extension of __________ isotherm. (A) Langmuir (B) Freundlich (C) Tempkin (D) None of these
Last Answer : (A) Langmuir
Description : Adsorption of a gas on a surface follows Freundlich adsorption isotherm. Plot of `"log " (x)/(m)` versus log P gives a straight line with slope equal
Last Answer : Adsorption of a gas on a surface follows Freundlich adsorption isotherm. Plot of `"log " (x ... of pressure. D. Adsorption is independent of pressure.
Description : Write an equation for Freundlich adsorption isotherm.
Last Answer : Write an equation for Freundlich adsorption isotherm.
Description : For a linear plot of log(x/m) versus log p in a Freundlich adsorption isotherm, which of the following statements is correct ? (k and n are constants)
Last Answer : For a linear plot of log(x/m) versus log p in a Freundlich adsorption isotherm, which of the following ... Both k and 1/n appear in the slope term.
Description : The change in enthalpy per unit weight of adsorbed gas when adsorbed on gas free or "outgassed" adsorbent to from a definite concentration of adsorbate is called its (A) Integral heat of adsorption (B) Heat of wetting (C) Differential heat of adsorption (D) Heat of normal condensation
Last Answer : (A) Integral heat of adsorption
Description : The change in enthalpy, when a unit quantity of gas is absorbed by relatively large quantity of adsorbent (on which a definite concentration of the adsorbed gas already exists) is termed as the (A) ... (B) Heat of wetting (C) Integral heat of adsorption (D) None of these
Last Answer : (A) Differential heat of adsorption
Description : Pick out the wrong statement. Generally for physical adsorption, a gas of (A) Higher molecular weight is adsorbed in preference to a gas of low molecular weight (B) High critical temperature ... volatility is adsorbed in preference to a gas of high volatility (D) None of these
Last Answer : (D) None of these
Description : 10. In Freundlich Adsorption isotherm, the value of 1/n is: (1) 1 in case of chemisorption (2) between 0 and 1 in all cases (3) between 2 and 4 in all cases (4) 1 in case of physical adsorption
Last Answer : between 0 and 1 in all cases
Description : Assertion(A): Physical adsorption of molecules on the surface requires activation energy. Reason(R): Because the bonds of adsorbed molecules are broke
Last Answer : Assertion(A): Physical adsorption of molecules on the surface requires activation energy. Reason(R): ... D. If both Assertion & Reason are False.
Description : In frenudlich adsorption isotherm, the value of `1//n` is
Last Answer : In frenudlich adsorption isotherm, the value of `1//n` is A. 1 in case of physical adsorption B. 1 in ... in all case D. between 2 and 4 in all cases
Description : According to Freundlich adsorption isotherm, which of the following is correct ?
Last Answer : According to Freundlich adsorption isotherm, which of the following is correct ? A. `(x)/(m ... the above are correct for different ranges of pressure
Description : According to Freundlich adsorption isotherm, which of the following is correct?
Last Answer : According to Freundlich adsorption isotherm, which of the following is correct? A. `(x)/(m) ... the above are correct for different ranges of pressure
Description : Freundlich adsorption isotherm, with the help of a graph.
Last Answer : Explain the following : Freundlich adsorption isotherm, with the help of a graph.
Description : What is the adsorption Isotherm?
Last Answer : What is the adsorption Isotherm?
Description : A battery of e.m.f. `10 V` is connected to resistance as shown in figure. The potential difference `V_(A) - V_(B)` between the point `A` and `B` is
Last Answer : A battery of e.m.f. `10 V` is connected to resistance as shown in figure. The potential difference `V_(A) - V_(B) ... -2V` B. 2V C. 5V D. `(20)/(11)V`
Description : For a reversible process at T = 300K, the volume is increased from `V_(i)=1L` to `V_(f)=10L`. Calculate `Delta H` if the process is isothermal -
Last Answer : For a reversible process at T = 300K, the volume is increased from `V_(i)=1L` to `V_(f)=10L`. Calculate `Delta H ... kJ B. 4.98 kJ C. 0 D. `-11.47 kJ`
Description : Internal energy of a gas obeying Van-Der-Waals equation of state, [p + (a/v2)] (V - b) = RT, depends upon its (A) Pressure & temperature (B) Pressure & specific volume (C) Temperature & specific volume (D) Temperature only
Last Answer : (A) Pressure & temperature
Description : A thick wire of radius `r=5 mm` carries a steady current `I=10 A`. An electron leaves its surface perpendicularly with velocity `v_(0)=10^(6) m//s`. F
Last Answer : A thick wire of radius `r=5 mm` carries a steady current `I=10 A`. An electron leaves its ... from the surface of the wire before it turns back.
Description : For calculating the evaporation rate over a reservoir surface E = 0.771 (1.465 - 0.00732B) (0.44 - 0.007375 V) (pe - pa), the equation is given by (A) Roohwer's, formula in M.K.S. (B) Roohwer's formula in F.P.S. (C) Dalton's formula in F.P.S. (D) Dalton's formula in M.K.S
Last Answer : Answer: Option A
Description : In an L-C -R search circuit connected to an AC source `V=V_(0)sin(100pi+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choose t
Last Answer : In an L-C -R search circuit connected to an AC source `V=V_(0)sin(100pi+(pi)/(6))``V_(R)=40V, V_ ... (a) and (b) are correct D. Both a and b are wrong
Description : In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choos
Last Answer : In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L) ... (2) A` C. `20sqrt(2) A` D. `25sqrt(2) A`
Description : At a given equilibrium pressure, with increase in temperature, the concentration of adsorbed gas on solid adsorbent (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially
Last Answer : (B) Decreases
Description : A charge q is moving with a velocity `v_(1)=1hati` m/s at a point in a magentic field and experiences a force `F=q[-hatj+1hatk]` N. If the charge is m
Last Answer : A charge q is moving with a velocity `v_(1)=1hati` m/s at a point in a magentic field and experiences a force `F ... `(hat(i)+hat(j)-hat(k))Wb//m^(2)`
Description : Each term of the Bernoulli's equation written in the form, (p/ρ) + (g/gc ). Z + (v 2 /2gc ) = constant, represents the total energy per unit (A) Mass (B) Volume (C) Specific weight (D) None of these
Last Answer : (A) Mass
Description : According to Bond crushing law, the work required to form particle of size 'D' from very large feed is (where (S/V)p and (S/V) f are surface to volume ratio of the product and feed respectively). (A) (S/V)p (B) √(S/V)p (C) (S/V) 2 p (D) (S/V) f
Last Answer : (B) √(S/V)
Description : If `10g` of `V_(2)O_(5)` is dissolved in acid and is reduced to `V^(2+)` by zinc metal, how many mole `I_(2)` could be reduced by the resulting soluti
Last Answer : If `10g` of `V_(2)O_(5)` is dissolved in acid and is reduced to `V^(2+)` by zinc metal, how many mole `I_(2 ... 127`) A. 0.11 B. 0.22 C. 0.055 D. 0.44
Description : In the circuit shown the cells `A` and `B` have negligible resistance. For `V_(A) = 12 V, R_(1) = 500 Omega` and `R = 100 Omega`, the galvanometer `(G
Last Answer : In the circuit shown the cells `A` and `B` have negligible resistance. For `V_(A) = 12 V, R_(1) = 500 Omega` and ` ... A. 4 V B. 2 V C. 12 V D. 6 V
Description : The volume (V) of a mass of gas varies directly as its absulute temperature (T) and iversely as the pressure (P) applied to it. The gas occupies a vol
Last Answer : The volume (V) of a mass of gas varies directly as its absulute temperature (T) and iversely as ... and pressure are 250 ml and 320 Pa respectively?
Description : The volume (V) of a mass of gas varies directly as its absolute temperature (T) and inversely as the pressure (P) applied to it. The gas occupies a vo
Last Answer : The volume (V) of a mass of gas varies directly as its absolute temperature (T) and inversely as ... and pressure are 200 ml and 250 Pa respectively?
Description : Boyle's law states that A. pressure of a gas is inversely proportional to its volume i.e. P V = constant B. pressure of a gas is directly proportional to its volume i.e. P⁄V = constant C. ... of a gas is directly proportional to the square of its volume i.e. P ⁄ V² = constant
Last Answer : pressure of a gas is inversely proportional to its volume i.e. P × V = constant
Description : Van der Waals derived an expression for the pressure defect', if the observed pressure is denoted as p' and volume is denoted as V', the gas pressure in the bulk of the gas is equal to: A. p + ... a: constant for the particular gas D. p + (a V²); where a: constant for the particular gas
Last Answer : p + a/(V²); where a: constant for the particular gas
Description : The internal energy of a gas obeying P (V - b) RT (where, b is a positive constant and has a constant Cv ), depends upon its (A) Pressure (B) Volume (C) Temperature (D) All (A), (B) & (C)
Last Answer : (C) Temperature
Description : If air is at pressure, p, of 3200 lbf/ft2 , and at a temperature, T, of 800 ˚R, what is the specific volume, v? (R=5303 ft-lbf/lbm-˚R, and air can be modeled as an ideal gas.) A.9.8 ft^3/lbm B.11.2 ft^3/lbm C.13.33 ft^3/lbm D.14.2 ft^3/lbm Formula: pv = RT v = RT / p
Last Answer : 13.33 ft^3/lbm
Description : For a perfect gas, according to Boyle’s law (where p = Absolute pressure, v = Volume, and T = Absolute temperature) A. p v = constant, if T is kept constant B. v/T = constant, if p is kept constant C. p/T = constant, if v is kept constant D. T/p = constant, if v is kept constant
Last Answer : Answer: A
Description : Freundlich equation applies to the adsorption of solute from (A) Dilute solutions, over a small concentration range (B) Gaseous solutions at high pressure (C) Concentrated solutions (D) None of these
Last Answer : (A) Dilute solutions, over a small concentration range
Description : The mass of argon adsorbed per unit mass of carbon surface is plotted against pressure. Which of the following plots is correct if x and m represent t
Last Answer : The mass of argon adsorbed per unit mass of carbon surface is plotted against pressure. Which of the ... Represents extrapolated data) A. B. C. D.
Description : Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the ... (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity
Last Answer : (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity
Description : For an irreversible process involving only pressure-volume work (A) (dF)T, p 0 (D) (dA)T, v >0
Last Answer : (A) (dF)T, p
Description : For a reversible process involving only pressure-volume work (A) (dF)T, p < 0 (B) (dF)T, p > 0 (C) (dF)T, p = 0 (D) (dA)T, v < 0
Last Answer : (C) (dF)T, p = 0
Description : 3.0 lbm of air are contained at 25 psia and 100 ˚F. Given that Rair = 53.35 ft-lbf/lbm- ˚F, what is the volume of the container? A.10.7 ft^3 B.14.7 ft^3 C.15 ft^3 D.24.9 ft^3 Formula: use the ideal gas law pV = mRT T = (100 +460) ˚R V = mRT/p
Last Answer : 24.9 ft^3
Description : The basic filtration equation is given as dt/dV = (µ/A ∆P). [(α .CV/A) + Rm], where, V is volume of the filtrate; A is the filtration area, a is specific cake resistance, μ is viscosity of ... produced? Neglect filter medium resistance, Rm; assume incompressible cake. (A) 10 (B) 20 (C) 25 (D) 30
Last Answer : (B) 20
Description : For which pair of the fuel gases, calorific value (C.V.) of one fuel is almost double that of the other on volume basis (i.e., kcal/Nm3 ), while the C.V. is same on weight basis (i.e., kcal/kg)? (A) Propane and acetylene (B) Propane and LPG (C) Sewage gas and gobar gas (D) B.F. gas and coke oven gas
Last Answer : (A) Propane and acetylene