Mass flow of granular solid (M) through a circular opening of dia, D follows (A) M ∝ √D (B) M ∝ D2 (C) M ∝ D3 (D) M ∝ D

Mass flow of granular solid (M) through a circular opening of
dia, D follows
(A) M ∝ √D
(B) M ∝ D2
(C) M ∝ D3
(D) M ∝ D
by

1 Answer

Answer :

(C) M ∝ D
by

Related questions

The critical speed of a trommel (N) is related to its dia (D) as (A) N ∝ 1/√D (B) N ∝ √D (C) N ∝ D (D) N ∝ 1/D

Description : The critical speed of a trommel (N) is related to its dia (D) as (A) N ∝ 1/√D (B) N ∝ √D (C) N ∝ D (D) N ∝ 1/D

Last Answer : (A) N ∝ 1/√D

rpm of a trommel at critical speed is given by (where, D = Diameter of trommel in ft) (A) 76.65/D (B) 76.65/√D (C) 76.65/D2 (D) 76.75 √D

Description : rpm of a trommel at critical speed is given by (where, D = Diameter of trommel in ft) (A) 76.65/D (B) 76.65/√D (C) 76.65/D2 (D) 76.75 √D

Last Answer : (B) 76.65/√D

At low Reynold's number, the power (P) required for agitating a fluid in a stirred tank becomes independent of inertial forces. In this limit, indicate which of the following relations is satisfied: Po = ρ/ρN3 D5 : Power number Re = ρ N D2 /μ: Reynold's number N is the impeller rotational speed, and D is the impeller diameter. (A) Po ∝ Re -1.0 (B) Po ∝ Re 0.0 (C) Po ∝ Re 0.5 (D) Po ∝ Re 1.0

Description : At low Reynold's number, the power (P) required for agitating a fluid in a stirred tank becomes independent of inertial forces. In this limit, indicate which of the following relations is satisfied: Po = ρ/ρN3 D5 : Power number Re = ρ N D2 ... Re -1.0 (B) Po ∝ Re 0.0 (C) Po ∝ Re 0.5 (D) Po ∝ Re 1.0

Last Answer : (B) Po ∝ Re 0.0 (C) Po ∝ Re 0.5

The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number

Description : The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number

Last Answer : (D) Dependent on the Reynolds number

For spheres, volume shape factor is given by (A) π = (A/D2 ) (B) 2π = (2A/D2 ) (C) π/6 = (V/D3 ) (D) AD/V

Description : For spheres, volume shape factor is given by (A) π = (A/D2 ) (B) 2π = (2A/D2 ) (C) π/6 = (V/D3 ) (D) AD/V

Last Answer : (C) π/6 = (V/D3 )

For spheres, the surface shape factor is given by (where, A = area, V = volume, and D = diameter) (A) π = (A/D2 ) (B) π/6 = (V/D3 ) (C) AD/V (D) None of these

Description : For spheres, the surface shape factor is given by (where, A = area, V = volume, and D = diameter) (A) π = (A/D2 ) (B) π/6 = (V/D3 ) (C) AD/V (D) None of these

Last Answer : (A) π = (A/D2 )

What is wrong here? =SUMIFS(D2:D3,">(TODAY()-14)",(N2:N3))

Description : What is wrong here? =SUMIFS(D2:D3,">(TODAY()-14)",(N2:N3))

Last Answer : answer:Your parameters are in the wrong order. The last parameter should be a criterion condition, according to microsoft Office SUMIF documentation. So the N column part should be first. From the ... copying and editing these similar functions, make sure you put the arguments in the correct order.

hydraulically equivalent, the relationship which holds good, is A. D8/3 = 4 b8/3 B. D3/8 = 4 b3/8 C. D2/3 = 4 b2/3 D. D3/2 = 4 b3/2

Description : hydraulically equivalent, the relationship which holds good, is A. D8/3 = 4 b8/3 B. D3/8 = 4 b3/8 C. D2/3 = 4 b2/3 D. D3/2 = 4 b3/2

Last Answer : ANS: A

A compound pipe of diameter d1, d2 and d3 having lengths l1, l2 and l3 is to be replaced by an equivalent pipe of uniform diameter d and of the same length (l) as that of the compound pipe. The size of the equivalent pipe is given by (A) l/d² = + + (B) l/d³ = + ) + (C) = + + (D)

Description : A compound pipe of diameter d1, d2 and d3 having lengths l1, l2 and l3 is to be replaced by an equivalent pipe of uniform diameter d and of the same length (l) as that of the compound pipe. The size of the equivalent pipe is given by (A) l/d² = + + (B) l/d³ = + ) + (C) = + + (D)

Last Answer : Answer: Option D

The torque transmitted by a hollow shaft of outer diameter (D) and inner diameter (d) (a)π/4fs(D2-d2)/D (b) π/4fs(D3-d3)/D (c) π/4fs(D4-d4)/D (d) π/4fs(D4-d4)/D

Description : The torque transmitted by a hollow shaft of outer diameter (D) and inner diameter (d) (a)π/4fs(D2-d2)/D (b) π/4fs(D3-d3)/D (c) π/4fs(D4-d4)/D (d) π/4fs(D4-d4)/D

Last Answer : (c) π/4fs(D4-d4)/D

Reduction ratio of crushers is the (A) Ratio of feed opening to discharge opening (B) Ratio of discharge opening to feed opening (C) Determining factor for minimum dia of the feed and the product (D) None of these

Description : Reduction ratio of crushers is the (A) Ratio of feed opening to discharge opening (B) Ratio of discharge opening to feed opening (C) Determining factor for minimum dia of the feed and the product (D) None of these

Last Answer : (A) Ratio of feed opening to discharge opening

For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Description : For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Last Answer : (A) Logarithmic

For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line ofthe pipe, and it follows a __________ relationship.(A) Logarithmic(B) Parabolic(C) Hyperbolic(D) Linear

Description : For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line of the pipe, and it follows a __________ relationship. (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear

Last Answer : (B) Parabolic

Drag force on the float of a Rotameter is (where Q = flow rate of the) (A) ∝ Q (B) ∝ √Q (C) ∝ Q2 (D) Constant

Description : Drag force on the float of a Rotameter is (where Q = flow rate of the) (A) ∝ Q (B) ∝ √Q (C) ∝ Q2 (D) Constant

Last Answer : (D) Constant

A fluid (µ/ρ) = 0.01 cm2 /sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec. (A) 7 (B) 700 (C) 7000 (D) 630

Description : A fluid (µ/ρ) = 0.01 cm2 /sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec. (A) 7 (B) 700 (C) 7000 (D) 630

Last Answer : (A) 7

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Sele(A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement. (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter

Reynolds number for flow of water at room temperature through 2 cm dia pipe at an average velocity of 5 cm/sec is around (A) 2000 (B) 10(C) 100 (D) 1000 Answer:

Description : Reynolds number for flow of water at room temperature through 2 cm dia pipe at an average velocity of 5 cm/sec is around (A) 2000 (B) 10 (C) 100 (D) 1000 Answer:

Last Answer : (D) 1000

Mass transfer co-efficient (K) and diffusivity (D) are related according to film theory as (A) K ∝ D (B) K ∝√D (C) K ∝ D1.5 (D) K ∝ D

Description : Mass transfer co-efficient (K) and diffusivity (D) are related according to film theory as (A) K ∝ D (B) K ∝√D (C) K ∝ D1.5 (D) K ∝ D

Last Answer : (A) K ∝ D

Boyle's law for gases states that (A) P ∝ 1/V, when temperature is constant (B) P ∝ 1/V, when temperature & mass of the gas remain constant (C) P ∝ V, at constant temperature & mass of the gas (D) P/V = constant, for any gas

Description : Boyle's law for gases states that (A) P ∝ 1/V, when temperature is constant (B) P ∝ 1/V, when temperature & mass of the gas remain constant (C) P ∝ V, at constant temperature & mass of the gas (D) P/V = constant, for any gas

Last Answer : (B) P ∝ 1/V, when temperature & mass of the gas remain constant

For a sphere falling in the constant drag co-efficient regime, its terminal velocity depends on its diameter (D) as (A) d (B) √d (C) d 2 (D) 1/d

Description : For a sphere falling in the constant drag co-efficient regime, its terminal velocity depends on its diameter (D) as (A) d (B) √d (C) d 2 (D) 1/d

Last Answer : (C) d

Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. (du/dy) n the value of 'n' for pseudoplastic and Dilatant fluid are < 1 and >1 respectively (C) Shear stress for Newtonian fluid is proportional to the rate of shear in the direction perpendicular to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Description : Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. ... to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Last Answer : (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

In a fully turbulent flow (Re > 10 5 ) in a pipe of diameter 'd', for a constant pressure gradient, the dependence of volumetric flow rate of an incompressible fluid is (A) d(B) d2(C) d2.5(D) d

Description : In a fully turbulent flow (Re > 10 5 ) in a pipe of diameter 'd', for a constant pressure gradient, the dependence of volumetric flow rate of an incompressible fluid is (A) d (B) d 2 (C) d 2.5 (D) d

Last Answer : (C) d 2.5

What is the critical rotation speed in revolutions per second, for a ball mill of 1.2 m diameter charged with 70 mm dia balls? (A) 0.5 (B) 1.0 (C) 2.76 (D) 0.66

Description : What is the critical rotation speed in revolutions per second, for a ball mill of 1.2 m diameter charged with 70 mm dia balls? (A) 0.5 (B) 1.0 (C) 2.76 (D) 0.66

Last Answer : (D) 0.66

A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Description : A metal wire of 0.01 m dia and thermal conductivity 200 W/m.K is exposed to a fluid stream with a convective heat transfer coefficient of 100 W/m2 .K. The Biot number is (A) 5.6 (B) 0.025 (C) 3.5 (D) 0.0035

Last Answer : (B) 0.025

. A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these

Description : . A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these

Last Answer : (A) 4.4 KPa

According to the film theory of mass transfer, the mass transfer co￾efficient is proportional to (where, D = molecular diffusivity). (A) D (B) D2 (C) D0.5 (D) 1/D

Description : According to the film theory of mass transfer, the mass transfer co￾efficient is proportional to (where, D = molecular diffusivity). (A) D (B) D2 (C) D0.5 (D) 1/D

Last Answer : (A) D

The current I passing through the galvanometer coil is related to the angle of deflection θ as a) I ∝ θ b) I 1/∝ θ c) I ∝ θ 2 d) I 1/∝ θ 2

Description : The current I passing through the galvanometer coil is related to the angle of deflection θ as a) I ∝ θ b) I 1/∝ θ c) I ∝ θ 2 d) I 1/∝ θ 2

Last Answer : a) I ∝ θ

For a turbine agitated and baffled tank, operating at low Reynold's number (based on impeller diameter), the power number (Np ) varies with NRe as (A) Np ∝ NRe (B) Np ∝ √NRe (C) Np → constan(D) Np ∝ 1/NRe

Description : For a turbine agitated and baffled tank, operating at low Reynold's number (based on impeller diameter), the power number (Np ) varies with NRe as (A) Np ∝ NRe (B) Np ∝ √NRe (C) Np → constan (D) Np ∝ 1/NRe

Last Answer : (D) Np ∝ 1/NRe

The specific cake resistance for incompressible sludges is (where ΔP = pressure drop over cake) (A) ∝ ΔP (B) ∝ 1/ ΔP (C) ∝ √ΔP (D) Independent of ΔP

Description : The specific cake resistance for incompressible sludges is (where ΔP = pressure drop over cake) (A) ∝ ΔP (B) ∝ 1/ ΔP (C) ∝ √ΔP (D) Independent of ΔP

Last Answer : (D) Independent of ΔP

The diffusivity (D) in a binary gas mixture is related to the temperature (T) as (A) D ∝ T (B) D ∝ T 0.5 (C) D ∝ T 1.5 (D) D ∝ T

Description : The diffusivity (D) in a binary gas mixture is related to the temperature (T) as (A) D ∝ T (B) D ∝ T 0.5 (C) D ∝ T 1.5 (D) D ∝ T

Last Answer : (C) D ∝ T 1.5

The energy radiated from a surface Q at absolute temperature T is related as (A) Q ∝ T 2 (B) Q ∝ T 4 (C) Q ∝ T 3 (D) None of these

Description : The energy radiated from a surface Q at absolute temperature T is related as (A) Q ∝ T 2 (B) Q ∝ T 4 (C) Q ∝ T 3 (D) None of these

Last Answer : (B) Q ∝ T

The local surface conductance for laminar film condensation on vertical surface is (where, t = film thickness) (A) ∝ t (B) ∝ 1/t (C) ∝ √t (D) Independent of 't

Description : The local surface conductance for laminar film condensation on vertical surface is (where, t = film thickness) (A) ∝ t (B) ∝ 1/t (C) ∝ √t (D) Independent of 't

Last Answer : (B) ∝ 1/t

According to Arrhenius equation of temperature dependency of rate constant for an elementary reaction (A) k ∝ √T (B) k ∝ e -E/RT (C) k ∝ T e -E/RT (D) None of these

Description : According to Arrhenius equation of temperature dependency of rate constant for an elementary reaction (A) k ∝ √T (B) k ∝ e -E/RT (C) k ∝ T e -E/RT (D) None of these

Last Answer : (B) k ∝ e -E/RT

Transition state theory relates the above quantities as (A) k ∝ e -E/RT (B) k ∝ T.e E/RT (C) k ∝ √T (D) k ∝ T 1.5

Description : Transition state theory relates the above quantities as (A) k ∝ e -E/RT (B) k ∝ T.e E/RT (C) k ∝ √T (D) k ∝ T 1.5

Last Answer : (B) k ∝ T.e E/RT

Rate constant 'k' and absolute temperature 'T' are related by collision theory (for bimolecular) as (A) k ∝ T 1.5 (B) k ∝ exp(-E/RT) (C) k ∝ √T (D) k ∝ T

Description : Rate constant 'k' and absolute temperature 'T' are related by collision theory (for bimolecular) as (A) k ∝ T 1.5 (B) k ∝ exp(-E/RT) (C) k ∝ √T (D) k ∝ T

Last Answer : (C) k ∝ √T

Charles' law for gases states that (A) V/T = Constant (B) V ∝ 1/T (C) V ∝ 1/P (D) PV/T = Constant

Description : Charles' law for gases states that (A) V/T = Constant (B) V ∝ 1/T (C) V ∝ 1/P (D) PV/T = Constant

Last Answer : (A) V/T = Constant

In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Description : In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Last Answer : (C) Laminar

Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Description : Pulverised coal passing through 200 mesh screen has a diameter of 0.074 mm (74 micron). The same passing through 50 mesh screen will have a dia of __________ mm. (A) 0.007 (B) 0.30 (C) 50 (D) 0.014

Last Answer : (B) 0.30

The opening sentence of your bestselling thriller goes as follows?

Description : The opening sentence of your bestselling thriller goes as follows?

Last Answer : Just the fact that I am writing this from under your bed should be enough to give you pause…he he heeee

A circular solid of uniform thickness 20 mm, radius 200 mm and mass 20 kg, is used as a flywheel. If it rotates at 600 rpm, the kinetic energy of the flywheel, in joules is 1. 395 2. 790 3. 1580 4. 3160

Description : A circular solid of uniform thickness 20 mm, radius 200 mm and mass 20 kg, is used as a flywheel. If it rotates at 600 rpm, the kinetic energy of the flywheel, in joules is 1. 395 2. 790 3. 1580 4. 3160

Last Answer : 2. 790

The mass moment of inertia of a solid circular disk is given by (A) mR 2 /2 (B) mR 2 /3 (C) 2mR 2 /3 (D) mR 2 /4

Description : The mass moment of inertia of a solid circular disk is given by (A) mR 2 /2 (B) mR 2 /3 (C) 2mR 2 /3 (D) mR 2 /4

Last Answer : (A) mR 2 /2

Adsorption of a gas follows Freundlich adsorption isotherm. In the given plot, x is the mass of the gas adsorbed on mass m of the adsorbent at pressur

Description : Adsorption of a gas follows Freundlich adsorption isotherm. In the given plot, x is the mass of the gas adsorbed on mass m of the adsorbent at pressur

Last Answer : Adsorption of a gas follows Freundlich adsorption isotherm. In the given plot, x is the mass of the gas adsorbed on mass m ... p^(1//2)` D. `p^(1//4)`

A particle is acted upon by a force of constant magnitude which is always perpendicular to the velocity of the particle. The motion of the particle takes place in a plane. It follows that (a) Its velocity is constant (b) Its acceleration is constant (c) Its kinetic energy is constant (d) It moves in a circular path

Description : A particle is acted upon by a force of constant magnitude which is always perpendicular to the velocity of the particle. The motion of the particle takes place in a plane. It follows that (a) Its ... ) Its acceleration is constant (c) Its kinetic energy is constant (d) It moves in a circular path

Last Answer : Ans:(d)

Satellite around Earth follows a circular path because A. gravitational force is parallel to velocity B. gravitational force is anti parallel to velocity C. gravitational force is perpendicular to velocity D. gravitational force is anti perpendicular to

Description : Satellite around Earth follows a circular path because A. gravitational force is parallel to velocity B. gravitational force is anti parallel to velocity C. gravitational force is perpendicular to velocity D. gravitational force is anti perpendicular to

Last Answer : gravitational force is perpendicular to velocity

Distribution of shear intensity over a rectangular section of a beam, follows: (A) A circular curve (B) A straight line (C) A parabolic curve (D) An elliptical curve

Description : Distribution of shear intensity over a rectangular section of a beam, follows: (A) A circular curve (B) A straight line (C) A parabolic curve (D) An elliptical curve

Last Answer : Answer: Option C

The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Description : The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Last Answer : [ B ] a rectangular parabolic curve

The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Description : The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Last Answer : [ B ] a rectangular parabolic curve