B.E.T. method of finding out surface area of a catalyst, uses the extension of __________ isotherm. (A) Langmuir (B) Freundlich (C) Tempkin (D) None of these

B.E.T. method of finding out surface area of a catalyst, uses the
extension of __________ isotherm.
(A) Langmuir
(B) Freundlich
(C) Tempkin
(D) None of these
by

1 Answer

Answer :

(A) Langmuir
by

Related questions

Which of the following curves shows the effect of temperature on the extent of gas-solid adsorption at a given pressure? (A) Langmuir adsorption isotherm (B) Adsorption isobar (C) Freundlich adsorption isotherm (D) None of these

Description : Which of the following curves shows the effect of temperature on the extent of gas-solid adsorption at a given pressure? (A) Langmuir adsorption isotherm (B) Adsorption isobar (C) Freundlich adsorption isotherm (D) None of these

Last Answer : (B) Adsorption isobar

__________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2(C) CO2(D) He

Description : __________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2 (C) CO2 (D) He

Last Answer : (A) N2

Adsorption of a gas on a surface follows Freundlich adsorption isotherm. Plot of `"log " (x)/(m)` versus log P gives a straight line with slope equal

Description : Adsorption of a gas on a surface follows Freundlich adsorption isotherm. Plot of `"log " (x)/(m)` versus log P gives a straight line with slope equal

Last Answer : Adsorption of a gas on a surface follows Freundlich adsorption isotherm. Plot of `"log " (x ... of pressure. D. Adsorption is independent of pressure.

The Langmuir adsorption isotherm is deduced using the assumption.

Description : The Langmuir adsorption isotherm is deduced using the assumption.

Last Answer : The Langmuir adsorption isotherm is deduced using the assumption. A. The adsorption isotherm is ... D. The adsorption takes place in multilayers.

An adsorption isotherm equation proposed by Langmuir is of the form `V = (V_(0)bPO)/((1 + bP))` where V is the volume of gas adsorbed at pressure P. F

Description : An adsorption isotherm equation proposed by Langmuir is of the form `V = (V_(0)bPO)/((1 + bP))` where V is the volume of gas adsorbed at pressure P. F

Last Answer : An adsorption isotherm equation proposed by Langmuir is of the form `V = (V_(0)bPO)/((1 + bP))` where V is ... of V on P can be depicted as B. C. D.

In Langmuir treatment of adsorption, (A) Whole surface of the catalyst does not have the same activity for adsorption and there is attraction between the adsorbed molecule (B) Whole surface of the catalyst is essentially uniform and the adsorbed molecule has no effect on the rate of adsorption per site (C) All the adsorption does not take place by the same mechanism (D) Extent of adsorption is more than one complete monomolecular layer on the surface

Description : In Langmuir treatment of adsorption, (A) Whole surface of the catalyst does not have the same activity for adsorption and there is attraction between the adsorbed molecule (B) Whole surface of ... same mechanism (D) Extent of adsorption is more than one complete monomolecular layer on the surface

Last Answer : (B) Whole surface of the catalyst is essentially uniform and the adsorbed molecule has no effect on the rate of adsorption per site

According to Freundlich adsorption isotherm, which of the following is correct ?

Description : According to Freundlich adsorption isotherm, which of the following is correct ?

Last Answer : According to Freundlich adsorption isotherm, which of the following is correct ? A. `(x)/(m ... the above are correct for different ranges of pressure

Adsorption of a gas follows Freundlich adsorption isotherm. In the given plot, x is the mass of the gas adsorbed on mass m of the adsorbent at pressur

Description : Adsorption of a gas follows Freundlich adsorption isotherm. In the given plot, x is the mass of the gas adsorbed on mass m of the adsorbent at pressur

Last Answer : Adsorption of a gas follows Freundlich adsorption isotherm. In the given plot, x is the mass of the gas adsorbed on mass m ... p^(1//2)` D. `p^(1//4)`

For a linear plot of log(x/m) versus log p in a Freundlich adsorption isotherm, which of the following statements is correct ? (k and n are constants)

Description : For a linear plot of log(x/m) versus log p in a Freundlich adsorption isotherm, which of the following statements is correct ? (k and n are constants)

Last Answer : For a linear plot of log(x/m) versus log p in a Freundlich adsorption isotherm, which of the following ... Both k and 1/n appear in the slope term.

According to Freundlich adsorption isotherm, which of the following is correct?

Description : According to Freundlich adsorption isotherm, which of the following is correct?

Last Answer : According to Freundlich adsorption isotherm, which of the following is correct? A. `(x)/(m) ... the above are correct for different ranges of pressure

Freundlich adsorption isotherm, with the help of a graph.

Description : Freundlich adsorption isotherm, with the help of a graph.

Last Answer : Explain the following : Freundlich adsorption isotherm, with the help of a graph.

Write an equation for Freundlich adsorption isotherm.

Description : Write an equation for Freundlich adsorption isotherm.

Last Answer : Write an equation for Freundlich adsorption isotherm.

According to Freundlich adsorption isotherm, which of the following is correct?

Description : According to Freundlich adsorption isotherm, which of the following is correct?

Last Answer : According to Freundlich adsorption isotherm, which of the following is correct? A. `(x)/(m) ... the above are correct for different ranges of pressure

10. In Freundlich Adsorption isotherm, the value of 1/n is: (1) 1 in case of chemisorption (2) between 0 and 1 in all cases (3) between 2 and 4 in all cases (4) 1 in case of physical adsorption

Description : 10. In Freundlich Adsorption isotherm, the value of 1/n is: (1) 1 in case of chemisorption (2) between 0 and 1 in all cases (3) between 2 and 4 in all cases (4) 1 in case of physical adsorption

Last Answer : between 0 and 1 in all cases

. B.E.T. method can be used to determine the __________ of a porous catalyst. (A) Solid density (B) Pore volume (C) Surface area (D) All (A), (B) and (C)

Description : . B.E.T. method can be used to determine the __________ of a porous catalyst. (A) Solid density (B) Pore volume (C) Surface area (D) All (A), (B) and (C)

Last Answer : (C) Surface area

Helium-mercury method is used for the measurement of the __________ of the catalyst. (A) Surface area (B) Porosity (C) Pore volume (D) Both (B) & (C)

Description : Helium-mercury method is used for the measurement of the __________ of the catalyst. (A) Surface area (B) Porosity (C) Pore volume (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

__________ is concerned with the adsorption equilibria. (A) Fick's law (B) Gibb's equation (C) Freundlich equation (D) None of these

Description : __________ is concerned with the adsorption equilibria. (A) Fick's law (B) Gibb's equation (C) Freundlich equation (D) None of these

Last Answer : (C) Freundlich equation

Langmuir equation is associated with (A) Leaching (B) Adsorption (C) Steam distillation (D) Multi-component absorption

Description : Langmuir equation is associated with (A) Leaching (B) Adsorption (C) Steam distillation (D) Multi-component absorption

Last Answer : (B) Adsorption

Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay(D) All (A), (B) & (C)

Description : Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Description : Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Last Answer : (B) K2O

Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Description : Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Last Answer : (C) V2O5

Ralph Lauren sells Polo products through department stores as well as in its own specialty shops. The designer uses __________ as a channel strategy. A)channel extension B)intermediary exclusion C)broker utilisation D)dual distribution E)channel diversification

Description : Ralph Lauren sells Polo products through department stores as well as in its own specialty shops. The designer uses __________ as a channel strategy. A)channel extension B)intermediary exclusion C)broker utilisation D)dual distribution E)channel diversification

Last Answer : D)dual distribution

Freundlich equation applies to the adsorption of solute from (A) Dilute solutions, over a small concentration range (B) Gaseous solutions at high pressure (C) Concentrated solutions (D) None of these

Description : Freundlich equation applies to the adsorption of solute from (A) Dilute solutions, over a small concentration range (B) Gaseous solutions at high pressure (C) Concentrated solutions (D) None of these

Last Answer : (A) Dilute solutions, over a small concentration range

Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the determination of catalyst surface area and pore size distribution (C) A higher temperature favours the reaction of higher activation energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Description : Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the ... energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Last Answer : (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

) When a firm uses one of its existing brand names as part of a brand name for an improved or new product, the branding is called __________. A)Individual branding B)Overall family branding C)Line family branding D)Brand -extension branding

Description : ) When a firm uses one of its existing brand names as part of a brand name for an improved or new product, the branding is called __________. A)Individual branding B)Overall family branding C)Line family branding D)Brand -extension branding

Last Answer : D)Brand -extension branding

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

Helium-mercury method can be used to determine the __________ of the catalyst particle. (A) Pore volume (B) Solid density (C) Porosity (D) All (A), (B), & (C)

Description : Helium-mercury method can be used to determine the __________ of the catalyst particle. (A) Pore volume (B) Solid density (C) Porosity (D) All (A), (B), & (C)

Last Answer : (D) All (A), (B), & (C)

Isotherm on an enthalpy-concentration diagram, for an ideal solution will be a (A) Straight line (B) Sine curve (C) Parabola (D) Hyperbola

Description : Isotherm on an enthalpy-concentration diagram, for an ideal solution will be a (A) Straight line (B) Sine curve (C) Parabola (D) Hyperbola

Last Answer : (A) Straight line

Catalyst carriers (A) Have very high selectivity (B) Increase the activity of a catalyst (C) Provide large surface area with a small amount of active material (D) Inhibit catalyst poisoning

Description : Catalyst carriers (A) Have very high selectivity (B) Increase the activity of a catalyst (C) Provide large surface area with a small amount of active material (D) Inhibit catalyst poisoning

Last Answer : (C) Provide large surface area with a small amount of active material

(A) Measures the catalyst surface area directly (B) Operates at very high pressure (C) Is made entirely of stainless steel (D) None of these

Description : BET apparatus (A) Measures the catalyst surface area directly (B) Operates at very high pressure (C) Is made entirely of stainless steel (D) None of these

Last Answer : (D) None of these

A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Description : A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Description : If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Last Answer : (B) Porosity is of less importance

Promoter is added to the catalyst to improve its (A) Porosity (B) Sensitivity (C) Surface area (D) None of these

Description : Promoter is added to the catalyst to improve its (A) Porosity (B) Sensitivity (C) Surface area (D) None of these

Last Answer : (B) Sensitivity

Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates is not used to derive BET equation? (A) Langmuir's assumption applies to every adsorbed layer (B) There is no dynamic equilibrium between successive layer (C) The adsorbed layer may be polymolecular in thickness and the heat of adsorption in each layer (except the first one) is involved in each of the evaporation process (D) None of these

Description : Brunauer, Emmet and Teller (BET) equation is used to determine the specific surface area of a porous particle but not the pore volume & the porosity of the catalyst bed. Which of the following postulates ... (except the first one) is involved in each of the evaporation process (D) None of these

Last Answer : (B) There is no dynamic equilibrium between successive layer

Effectiveness factor (E) of a catalyst pellet is defined as, E = (actual rate within pore of the catalyst)/(rate if not snowed by pore diffusion), Effectiveness factor for a first order reaction is given by (where, T = Thiele modulus) (A) tan hT/T (B) tan T/T(C) tan hT/tan T(D) None of these

Description : Effectiveness factor (E) of a catalyst pellet is defined as, E = (actual rate within pore of the catalyst)/(rate if not snowed by pore diffusion), Effectiveness factor for a first order reaction is given by (where, T = Thiele modulus) (A) tan hT/T (B) tan T/T (C) tan hT/tan T (D) None of these

Last Answer : (A) tan hT/T

Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of concentration ≥ 98% (C) 75% oleum can be produced by distillation of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Description : Low pressure Zeigler process for the manufacture of polythene uses a catalyst which is (A) Ni (B) V2O5 (C) Fe (D) Aluminium triethyl combined with titanium tetrachloride

Last Answer : (D) Aluminium triethyl combined with titanium tetrachloride

Zeigler process (A) Produces high density polythene(B) Uses no catalyst(C) Produces low density polythene(D) Employs very high pressure

Description : Zeigler process (A) Produces high density polythene (B) Uses no catalyst (C) Produces low density polythene (D) Employs very high pressure

Last Answer : (A) Produces high density polythene

Zeigler process (A) Produces high density polyethylene (B) Produces low density polyethylene (C) Uses no catalyst (D) Employs very high pressure

Description : Zeigler process (A) Produces high density polyethylene (B) Produces low density polyethylene (C) Uses no catalyst (D) Employs very high pressure

Last Answer : (A) Produces high density polyethylene

In frenudlich adsorption isotherm, the value of `1//n` is

Description : In frenudlich adsorption isotherm, the value of `1//n` is

Last Answer : In frenudlich adsorption isotherm, the value of `1//n` is A. 1 in case of physical adsorption B. 1 in ... in all case D. between 2 and 4 in all cases

What is the adsorption Isotherm?

Description : What is the adsorption Isotherm?

Last Answer : What is the adsorption Isotherm?

The line on a map connecting points of equal temperature at a given time is – (1) Isohyet (2) Isobar (3) Isthumus (4) Isotherm

Description : The line on a map connecting points of equal temperature at a given time is – (1) Isohyet (2) Isobar (3) Isthumus (4) Isotherm

Last Answer : (4) Isotherm Explanation: An isotherm is a line that connects points on a map that have the same temperature. Therefore, all points through which an isotherm passes have the same or ... Generally, isotherms representing 5°C or 10°F temperature differences are used, but any interval may be chosen.

Which of the following assumptions of Freunlich adsorption isotherm is incorrect? (a) The constants are temperature dependent (b) It is valid over a range of pressure only (c) Adsorption isotherm equation is purely an empirical equation (d) The adsorbed molecules may be multimolecular in thickness

Description : Which of the following assumptions of Freunlich adsorption isotherm is incorrect? (a) The constants are temperature dependent (b) It is valid over a range of pressure only (c) Adsorption ... equation is purely an empirical equation (d) The adsorbed molecules may be multimolecular in thickness

Last Answer : (d) The adsorbed molecules may be multimolecular in thickness

The line on a map connecting points of equal temperature at a given time is (1) Isohyet (2) Isobar (3) Isthumus (4) Isotherm

Description : The line on a map connecting points of equal temperature at a given time is (1) Isohyet (2) Isobar (3) Isthumus (4) Isotherm

Last Answer : Isotherm

Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total surface area of 6291456 `cm^(2)

Description : Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total surface area of 6291456 `cm^(2)

Last Answer : Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total ... B. `80` C. `20` D. `22`

Product is a k t is a key element in _____. At one extreme, it m e, it may consist of pure tangible goods or at the other extreme pure services. a. market offering b. brand equity brand equity c. brand extension d. co-branding

Description : Product is a k t is a key element in _____. At one extreme, it m e, it may consist of pure tangible goods or at the other extreme pure services. a. market offering b. brand equity brand equity c. brand extension d. co-branding

Last Answer : a. market offering

Arrhenius equation K = Ae-E a / R T In some reactions, Rate of reaction is directly proportional to. Concentration of catalyst Catalyst used in Bio-Chemical reactions is called. Enzymes Reactions catalyzed by light are called as. Photo catalyzed or Photosensitised reactions

Description : Arrhenius equation K = Ae-E a / R T In some reactions, Rate of reaction is directly proportional to. Concentration of catalyst Catalyst used in Bio-Chemical reactions is called. Enzymes Reactions catalyzed by light are called as. Photo catalyzed or Photosensitised reactions

Last Answer : Define order of reaction

The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Description : The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Last Answer : link state

When a firm uses one of its existing brand names as part of a brand name for an improved or new product, the branding is called ____________ 1. individual branding 2. overall family branding 3. line family branding 4. brand-extension branding 5. none of these

Description : When a firm uses one of its existing brand names as part of a brand name for an improved or new product, the branding is called ____________ 1. individual branding 2. overall family branding 3. line family branding 4. brand-extension branding 5. none of these

Last Answer : brand-extension branding

Which of the following factors control the deactivation of a porous catalyst pellet? (A) Decay reactions (B) Pore diffusion (C) Form of surface attack by poison (D) All (A), (B) and (C)

Description : Which of the following factors control the deactivation of a porous catalyst pellet? (A) Decay reactions (B) Pore diffusion (C) Form of surface attack by poison (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)