At NTP , 5.6 L of a gas weight 8 g . The vapour density of gas is :-

1 Answer

Answer :

At NTP , 5.6 L of a gas weight 8 g . The vapour density of gas is :- A. 32 B. 40 C. 16 D. 8

Related questions

Description : A standard ice point temperature corresponds to the temperature of (a) water at 0°C (b) ice at - 4°C (c) mixture of ice, water and vapour under equilibrium conditions under NTP conditions (d) mixture of ice and water Under equilibrium conditions.

Last Answer : Ans: D

Description : 0.01 mole of iodoform `(CHI_(3))` reacts with Ag to produce a gas whose volume at NTP is `2CHI_(3)+6Ag to6Agl(s)+C_(2)H_(2)(g)`

Last Answer : 0.01 mole of iodoform `(CHI_(3))` reacts with Ag to produce a gas whose volume at NTP is `2CHI_(3)+6Ag ... mL B. 112 mL C. 336 mL D. None of these

Description : Volume at NTP of 0.22 g of `CO_(2)` is same as that of

Last Answer : Volume at NTP of 0.22 g of `CO_(2)` is same as that of A. 0.01 g of hydrogen B. 0.085 g of hydrogen C. 320 mg of gaseous `SO_(2)` D. All of the above.

Description : 5 L of gas at STP weight 6.25 g . What is the gram molecular weight ?

Last Answer : 5 L of gas at STP weight 6.25 g . What is the gram molecular weight ? A. 1.25 B. 14 C. 28 D. 56

Description : What is the full form of NTP ?

Last Answer : NTP 's full National Temperature And Pressure.

Last Answer : The Network Time Protocol.

Description : What volume at NTP of gaseous ammonia will be required to be passed into `30 cm^(3)` of 1 N `H_(2)SO_(4)` solution to bring down the acid strength of

Last Answer : What volume at NTP of gaseous ammonia will be required to be passed into `30 cm^(3)` of 1 N `H_(2 ... down the acid strength of the latter of 0.2 N ?

Description : One ton of the refrigeration is (a) the standard unit used in refrigeration problems (b) the cooling effect produced by melting 1 ton of ice (c) the refrigeration effect to freeze 1 ton of water at ... ice at 0°C in 24 hours (d) the refrigeration effect to produce 1 ton of ice at NTP conditions

Last Answer : Ans: c

Description : It is said that nucleotide phosphatase (NTP) is a better index of obstructive liver disease than alkaline phosphatase (ALP), why?

Last Answer : ALP level is increased in both liver and bone diseases, but NTP is only in liver diseases. 

Description : What will be the volume of CO2 at NTP obtained on heating 10 grams of (90% pure) limestone [Pb. CET 2001] (A) 22.4 litre (B) 2.016 litre (C) 2.24 litre (D) 20.16 litre

Last Answer : (B) 2.016 litre

Description : Vapour density of a gas is 22. What is its molecular mass ?

Last Answer : Vapour density of a gas is 22. What is its molecular mass ? A. 33 B. 22 C. 44 D. 11

Description : A gas is found to have the formula (CO)n. Its vapour density is 70. What must the value of n be?

Last Answer : 5

Description : Vapour density of a gas is 22. What is its molecular mass? [AFMC 2000] (A) 33 (B) 22 (C) 44 (D) 11

Last Answer : (C) 44

Description : A solution containing 30 g of non-volatile solute exactly in 90 g of water has a vapour pressure of 2.8 kPa at 298 K. Further 18 g of water is added to this solution. The new vapour pressure ... K. Calculate (i) the molecular mass of solute and (ii) vapour pressure of water at 298 K -Chemistry

Last Answer : For a very dilute solution ∴ Molecular mass, MB = 34 g/mol.

Description : If a piece of rock has a volume of 0.73 L and a mass of 1524 g what is the density of the rock in gmL?

Last Answer : The density is 2,09 g/cm3.

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Description : S.L. Miller an American scientist created electric discharge experiment in a closed flask containing `CH_(4),H_(2),NH_(3)` and water vapour at what te

Last Answer : S.L. Miller an American scientist created electric discharge experiment in a closed flask containing `CH_(4),H_(2),NH_ ... . `200^(@)C` D. `1000^(@)C`

Description : The density of air is `0.001293g//ml` at S.T.P. Its vapour density will be:

Last Answer : The density of air is `0.001293g//ml` at S.T.P. Its vapour density will be: A. 143 B. 14.53 C. 1.43 D. 0.143

Description : A hydrocarbon contain `80%` C . The vapour density of compound in 30 . Molecular formula of compound is :-

Last Answer : A hydrocarbon contain `80%` C . The vapour density of compound in 30 . Molecular formula of compound is :- A. ` ... ` C. `C_(4)H_(12)` D. All of these

Description : In a barometer, mercury is preferred over water because (a) mercury is a good conductor of heat (b) mercury is shining and therefore its level can be read easily (c) mercury is available in pure form (d) mercury has high density and low vapour pressure

Last Answer : Ans:(d)

Description : At a fixed total pressure, humidity depends only on the (A) Partial pressure of vapour in the mixture (B) Heat capacity of the vapour (C) Density of the vapour (D) None of these

Last Answer : (A) Partial pressure of vapour in the mixture

Description : At the critical point of a substance (A) The surface tension vanishes (B) Liquid and vapour have the same density (C) There is no distinction between liquid and vapour phases (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : The burnout heat flux in the nucleate boiling regime is not a function of the (A) Liquid density (B) Vapour density (C) Temperature difference (D) Heat of evaporation

Last Answer : (B) Vapour density

Description : Alcohol is used in manometers because (A) It has low vapour pressure (B) It is clearly visible (C) It has low surface tension (D) It can provide longer column due to low density

Last Answer : Answer: Option D

Description : Choose the wrong statement. Alcohol is used in manometer, because (A) Its vapour pressure is low (B) It provides suitable meniscus for the inclined tube (C) Its density is less (D) It provides longer length for a given pressure difference

Last Answer : Answer: Option A

Description : An indication of sensible heat content in air-water vapour mixture is a) wet bulb temperature b) dew point temperature c) density of air d) dry bulb temperature

Last Answer : d) dry bulb temperature

Description : If two compounds have the same empirical formula but different molecular formula, they must have [MP PMT 1986] (A) Different percentage composition (B) Different molecular weights (C) Same viscosity (D) Same vapour density

Last Answer : (B) Different molecular weights

Description : Silver (atomic weight `108 g mol^(-1))` has a density of `10.5 g cm^(-3)`. The number of silver atoms on a surfaces of area `10^(-12) m^(2)` can be ex

Last Answer : Silver (atomic weight `108 g mol^(-1))` has a density of `10.5 g cm^(-3)`. The number of silver atoms on a ... `Y xx 10^(-x)`, The value of `x` is .

Description : An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity ... , is (A) 8.3 kg/cm2 (B) 7.6 kg/cm2 (C) 21.5 kg/cm2 (D) 11.4 kg/cm2

Last Answer : Answer: Option A

Description : If G = insoluble gas in gas stream and L = non-volatile solvent in liquid stream, then the slope of the operating line for the absorber is (A) L/G (B) G/L (C) Always < 1 (D) None of these

Last Answer : (A) L/G

Description : . The absorption factor is defined as (where, L = liquid flow rate, G = gas flow rate and, m = slope of the equilibrium line). (A) L/mG (B) G/mL (C) mL/G (D) LG/m

Last Answer : (A) L/mG

Description : Sodium reacts with water to form sodium hydroxide and hydrogen gas. The balanced equation which represents the above reaction is (a) Na(s) + 2H20(l) → 2NaOH(aq) + 2H2(g) (b) 2Na(s) + 2H2O(l) → 2NaOH(aq) +H2(g) (c) 2Na(s) + 2H20(l) → NaOH(aq) + 2H2(g) (d) 2Na(s) + H20(l) - 2NaOH(aq) + 2H2(g)

Last Answer : Answer: (b)

Description : Absorption (liquid-gas system) with evolution of heat as compared to isothermal absorption results in (A) Decreased solute solubility (B) Large minimum liquid to gas (L/G) ratio (C) Large number of trays (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Mixed gas' used in steel plants is a mixture of (A) B.F. gas and coke oven gas (B) Coke oven gas and converter gas (C) Coke oven gas and L.P.G (D) Blast furnace gas and naphtha vapor

Last Answer : (A) B.F. gas and coke oven gas

Description : Pick out the wrong statement. (A) Main constituents of LPG are propane and butane (B) C.V. of natural gas is about 10000 KCal/Nm3 (C) C.V. of LPG is about 26000 kcal/Nm3 (11500 kcal/kg) (D) L.P.G. is lighter than air

Last Answer : (D) L.P.G. is lighter than air

Description : The relation between molarity (M) and molarity (m) is given by : (`rho` = density of solution (g/mL), `M_(1)` = molecular weight of solute) :-

Last Answer : The relation between molarity (M) and molarity (m) is given by : (`rho` = density of solution (g/mL), `M_(1 ... ))` D. `m = (1000M)/(1000rho -MM_(1))`

Description : While Young's modulus ‘E’ relates to change in length and bulk modulus ‘K’ relates to change in volume, modulus of rigidity ‘G’ relates to change in: A. weight B. density C. shape D. temperature

Last Answer : . shape

Description : A moist soil sample of volume 60 cc. weighs 108 g and its dried weight is 86.4 g. If its absolute density is 2.52, the degree of saturation is (A) 54 % (B) 64 % (C) 74 % (D) 84 %

Last Answer : (D) 84 %

Description : The general relationship between specific gravity (G), weight of water ( ), degree of saturation (Sr ), void ratio (e) and bulk density ( ), is (A) = (S - eSr ) /(1 + e) (B) = (G + eSr ) /(1 + e) (C) = (1 + e) /(G + Sr ) (D) = (1 - Sr ) e/(G + Sr )

Last Answer : (B) = (G + eSr ) /(1 + e)

Description : If the length of a wall on either side of a lintel opening is at least half of its effective span L, the load W carried by the lintel is equivalent to the weight of brickwork contained in an equilateral triangle, producing a maximum bending moment (A) WL/2 (B) WL/4 (C) WL/6 (D) WL/8

Last Answer : Answer: Option C

Description : Given `C(s)+O_(2)(g)rarr CO_(2)(g)+94.2` Kcal `H_(2)(g)+2O_(2)(g)rarr CO_(2)(g)+2H_(2)O(l)+210.8` Kcal The heat of formation of methane in Kcal will b

Last Answer : Given `C(s)+O_(2)(g)rarr CO_(2)(g)+94.2` Kcal `H_(2)(g)+2O_(2)(g)rarr CO_(2)(g)+2H_(2)O(l)+210.8` Kcal ... `-45.9` B. `-47.8` C. `-20.0` D. `-47.3`

Description : Normal haemoglobin level for male is _______ g/L a. 13.8 to 17 b. 12.8 to 15 c. 20 to 23 d. 16 to 19

Last Answer : a. 13.8 to 17

Description : what is the density of CO GAS IF 0.196 g occupied a volume of 100 ml?

Last Answer : 100ml = 1 dm3 0.196g = 196x10-6kg Density = mass/volume Density of CO = 196x10-6 / 1 = 196x10-6 kg/dm3

Description : The value of G in C.G.S system is 6.67 × 10^-8 dyne cm^2 g^-2. Calculate its value in S.l. system.

Last Answer : The value of G in C.G.S system is 6.67 × 10-8 dyne cm2 g-2. Calculate its value in S.l. system.

Description : A shot-put is a metallic sphere of radius 4.9 cm. If the density of the metal is 7.8 g/cm3. -Maths 9th

Last Answer : We have, the radius of a metallic sphere (r) = 4.9 cm ∴ Volume of the sphere = 4 / 3 πr3 = 4 / 3 × 22 / 7 × 4.9 × 4.9 × 4.9 = 493.005 cm3 ∵ Density of the metal used = 7.8 g/cm3 Hence, the mass of the shot - put = 493.005 × 7.8 = 3845.44

Description : A shot-put is a metallic sphere of radius 4.9 cm. If the density of the metal is 7.8 g/cm3. -Maths 9th

Last Answer : We have, the radius of a metallic sphere (r) = 4.9 cm ∴ Volume of the sphere = 4 / 3 πr3 = 4 / 3 × 22 / 7 × 4.9 × 4.9 × 4.9 = 493.005 cm3 ∵ Density of the metal used = 7.8 g/cm3 Hence, the mass of the shot - put = 493.005 × 7.8 = 3845.44

Description : Density of oil is 0.8 g cm^3 in C.G.S. unit. Find its value in S.I. units.

Last Answer : Density of oil is 0.8 g cm3 in C.G.S. unit. Find its value in S.I. units.

Description : Calculate the mass and mean density of the earth from the following data : `{:(,"Gravitational constant",(G),=6.6xx10^(-11)Nm^(2)kg^(-2)),(,"Radius of

Last Answer : Calculate the mass and mean density of the earth from the following data : `{:(,"Gravitational constant",(G),=6. ... to gravity",(g),=9.8ms^(-2)):}`

Description : Calculate the mass and mean density of the earth from the following data : `{:(,"Gravitational constant",(G),=6.6xx10^(-11)Nm^(2)kg^(-2)),(,"Radius of

Last Answer : Calculate the mass and mean density of the earth from the following data : `{:(,"Gravitational constant",(G),=6. ... to gravity",(g),=9.8ms^(-2)):}`

Description : If dry density, water density and specific gravity of solids of a given soil sample are 1.6 g/cc, 1.84 g/cc and 2.56 respectively, the porosity of the soil sample, is (A) 0.375 (B) 0.370 (C) 0.380 (D) 0.390

Last Answer : (A) 0.375