In a control system the output of the controller is given to?

In a control system the output of the controller is given to?
by

1 Answer

Answer :

In a control system the output of the controller is given to final control element.

by

Related questions

A PD controller is used to compensate a system. Compared to the uncompensated system, the compensated

Description : A PD controller is used to compensate a system. Compared to the uncompensated system, the compensated system has: (1) A higher type number. (2) Reduced damping. (3) Higher noise amplification. (4) Larger transient overshoot. 

Last Answer : A PD controller is used to compensate a system. Compared to the uncompensated system, the compensated system has: Higher noise amplification.

In a closed-loop system in which the output is the speed of a motor, the output rate control can be used to_________.

Last Answer : In a closed-loop system in which the output is the speed of a motor, the output rate control can be used to limit the acceleration of the motor.

The output of a feedback control system must be a function of?

Description : The output of a feedback control system must be a function of?

Last Answer : The output of a feedback control system must be a function of reference and output.

A control system in which the control action is somehow dependent on the output is known as

Description : A control system in which the control action is somehow dependent on the output is known as?

Last Answer : A control system in which the control action is somehow dependent on the output is known as Closed loop system.

If stability error for step input and speed of response be the criteria for design, what controller would you

Description : If stability error for step input and speed of response be the criteria for design, what controller would you recommend (1) P controller (2) PD controller (3) PI controller (4) PID controller

Last Answer : If stability error for step input and speed of response be the criteria for design, what controller would you recommend (1) P controller (2) PD controller (3) PI controller (4) PID controller

A controller, essentially, is a ?

Description :  A controller, essentially, is a ?

Last Answer :  A controller, essentially, is a comparator.

Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is

Description : Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is (A) causal & linear (B) non-causal & linear (C) causal & non-linear (D) non-causal & non-linear

Last Answer : Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is non-causal & linear

If a step function is applied to the input of a system and the output...

Description : If a step function is applied to the input of a system and the output remains below a certain level for all the time, the system is?

Last Answer : If a step function is applied to the input of a system and the output remains below a certain level for all the time, the system is not necessarily stable.

Draw typical wiring details & four specifications of AC output module of PLC.

Description : Draw typical wiring details & four specifications of AC output module of PLC.

Last Answer : The below figure show the basic field wiring for digital 120V AC output module. The Wiring diagrams show how wires of output devices are connected to screw terminals of PLC modules. As per the wiring ... excessive current from damaging the wiring to the field devices.  Specifications:-

List any four input and four output devices used with PLC.

Description : List any four input and four output devices used with PLC.

Last Answer : Input device: 1. Push button. 2. Temperature switches. 3. Limit switches. 4. Pressure switches. 5. Level Switches. 6. Proximity Switches. Output devices: 1. Motor. 2. Display. 3. Heater coil. 4. Relay. 5. Lamp. 6. Buzzer.

A phase lag lead network introduces in the output?

Description : A phase lag lead network introduces in the output?

Last Answer : A phase lag lead network introduces in the output lag at low frequencies and lead at high frequencies.

Any externally introduced signal affecting the controlled output is called a?

Description : Any externally introduced signal affecting the controlled output is called a?

Last Answer : Any externally introduced signal affecting the controlled output is called a stimulus.

The initial response when the output is not equal to input is called?

Description : The initial response when the output is not equal to input is called?

Last Answer : The initial response when the output is not equal to input is called Transient response.

The purpose of a 'slew rate controller' in a circuit such as shown in the illustration is to ______________. EL-0096 A. limit the rate of change of a signal B. introduce a 'live zero' factor into the circuit C. shape the linear input into a non-linear output D. reduce air pressure to a value required by a combination circuit

Description : The purpose of a 'slew rate controller' in a circuit such as shown in the illustration is to ______________. EL-0096 A. limit the rate of change of a signal B. introduce a 'live zero' ... linear input into a non-linear output D. reduce air pressure to a value required by a combination circuit

Last Answer : Answer: A

As shown in the illustration, the circuit which 'shapes' the linear output of the thrust lever so that the steady-state ship speed is linear with respect to that lever's setting is the _____________. EL-0095 A. 'pitch controller' B. 'error amplifier' C. 'function generator' D. 'servo amplifier'

Description : As shown in the illustration, the circuit which 'shapes' the linear output of the thrust lever so that the steady-state ship speed is linear with respect to that lever's setting is the _____________. EL-0095 A. 'pitch controller' B. 'error amplifier' C. 'function generator' D. 'servo amplifier'

Last Answer : Answer: C

An aspect of Input/Output controller of data logic is called (1) General Buffering (2) Zero Buffering (3) Buffering (4) Data Buffering

Description : An aspect of Input/Output controller of data logic is called (1) General Buffering (2) Zero Buffering (3) Buffering (4) Data Buffering

Last Answer : Buffering

Draw the labeled block diagram of process control system and explain each block.

Description : Draw the labeled block diagram of process control system and explain each block.

Last Answer : Explanation - Process control system consists of process or plant, sensor, error detector, automatic Controller, actuator or control element. 1) Process or plant- process means some manufacturing sequence ... process which changes the process variable. Output of this block is denoted by u .

Explain the significance of the Laplace transform in control system.

Description : Explain the significance of the Laplace transform in control system.

Last Answer : Significance of Laplace Transform- * Laplace transform convert higher order integral differential equation into simple algebraic form. * Laplace transform converts the differential equation into an algebraic ... equations. * Laplace transform convert time domain to frequency domain (s-plane). 

The open loop control system is one in which _____.

Description : The open loop control system is one in which _____.

Last Answer : the output is independent of output

In a control system, the comparator measures the difference between

Description : In a control system, the comparator measures the difference between (a) output and input (b) output of controller and system (c) actual and desired performance (d) input and error signal  

Last Answer : B

For a stable feedback control system, the phase margin is

Description : For a stable feedback control system, the phase margin is  a) always positive b) always negative c) may be positive or negative d) always greater than 180o

Last Answer : For a stable feedback control system, the phase margin is always positive

For a feedback control system of type 2, the steady error for a rap input is

Description : For a feedback control system of type 2, the steady error for a rap input is  A) Infinite B) Constant C) Zero D) Indeterminate

Last Answer : For a feedback control system of type 2, the steady error for a rap input is Zero 

For a 2nd order feedback control system, the peak resonance magnitude should be Mp ≤ 1.15. Hence the

Description : For a 2nd order feedback control system, the peak resonance magnitude should be Mp ≤ 1.15. Hence the damping ratio (δ) is  (a) 0.1 (d) 0.5 (c) 0.707 (d) 1

Last Answer : For a 2nd order feedback control system, the peak resonance magnitude should be Mp ≤ 1.15. Hence the damping ratio (δ) is 0.5

In order to regulate steady state error to zero, in a negative feedback control system, one employs

Description : In order to regulate steady state error to zero, in a negative feedback control system, one employs

Last Answer : In order to regulate steady state error to zero, in a negative feedback control system, one employs Integral control

A differentiator is not usually used in control system, because it : -

Description : A differentiator is not usually used in control system, because it : - (A) reduces damping  (B) increases error  (C) reduces gain margin  (D) increases input noise

Last Answer : A differentiator is not usually used in control system, because it : - increases input noise

A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the

Description : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system (A) crosses the real axis at +0.1 (B) crosses the real axis at -0.1. (C) crosses the imaginary axis at -0.1 (D) crosses the imaginary axis at +0.1

Last Answer : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system crosses the real axis at -0.1.

Negative feedback in a closed-loop control system DOES NOT

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over...

Description : In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over frequency is - 125°.. The phase margin of the system is (a) - 125° (b) - 55° (c) 55° (d) 125°

Last Answer : In the Bode plot of a unity feedback control system, the value of phase of G(jw) at the gain cross -over frequency is - 125°.. The phase margin of the system is 55°

For a type three-control system the asymptote at lower frequency will have a slope...

Description : For a type three-control system the asymptote at lower frequency will have a slope  A) – 6 db per octave B) – 18 db per octave C) – 20 db per octave D) – 60 db per octave

Last Answer : b

In a closed loop control system ...

Description : In a closed loop control system  (a) control action depends upon the output and also on the input command (b) output signal is fed back to be compared with the reference signal (c) the accuracy is better than in the open loop system (d) all of the above

Last Answer : In a closed loop control system control action depends upon the output and also on the input command , output signal is fed back to be compared with the reference signal , the accuracy is better than in the open loop system. 

The first order control system, which is well designed, has a?

Description : The first order control system, which is well designed, has a?

Last Answer : The first order control system, which is well designed, has a large negative transfer function pole.

In a control system integral error compensation _______ steady state error.

Description : In a control system integral error compensation _______ steady state error.

Last Answer : In a control system integral error compensation minimizes steady state error.

A differentiator is usually not a part of a control system because it?

Last Answer : A differentiator is usually not a part of a control system because it increases input noise.

A control system with excessive noise, is likely to suffer from?

Description : A control system with excessive noise, is likely to suffer from?

Last Answer : A control system with excessive noise, is likely to suffer from saturation in amplifying stages.

_____is an open loop control system.

Description : _____is an open loop control system.

Last Answer : Field controlled D.C. motor is an open loop control system.

An automatic toaster is a ______ loop control system.

Description : An automatic toaster is a ______ loop control system.

Last Answer : An automatic toaster is an open loop control system.

A control system working under unknown random actions is called

Description : A control system working under unknown random actions is called 

Last Answer : A control system working under unknown random actions is called stochastic control system.

In closed loop control system, with positive value of feedback gain the overall gain of the system will

Description : In closed loop control system, with positive value of feedback gain the overall gain of the system will

Last Answer : In closed loop control system, with positive value of feedback gain the overall gain of the system will decrease.

In an open loop control system?

Last Answer : In an open loop control system Output is independent of control input.

What are the advantages of open loop control system?

Description : What are the advantages of open loop control system?

Last Answer : Open loop control system are simple to design. Open loop control system are generally stable.

what is open loop and close loop control system?

Description : what is open loop and close loop control system?

Last Answer : A) In open loop system the input is independent         of output but output is depends on input. A-1. no feedback path in open loop s/m    -2. less accuracy than close loop s/m. Ex. Washing ...    -3. high accuracy. Ex. Air conditioner ( AC ), rocket launcher, radar          system, etc

Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Description : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Last Answer : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is 16

Whether a given point in the S-plane lies on the Root Locus of a system can be determined by

Description : Whether a given point in the S-plane lies on the Root Locus of a system can be determined by (A) Magnitude criterion (B) Angle Criterion (C) Both Magnitude and Angle Criteria (D) Break-in and Break-away Criteria

Last Answer : Whether a given point in the S-plane lies on the Root Locus of a system can be determined by Angle Criterion

As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay #6 C. the RPM 'function generator' and 'thrust levers' have no control D. the 'E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Description : As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay ... E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Last Answer : Answer: C

Why derivative controller is not used in control system?

Description : Why derivative controller is not used in control system?

Last Answer : The derivative controller produces a control action based on rare of change of error signal and it does not produce corrective measures for any constant error. Hence derivative controller is not used in control system

State the principle of ON-OFF control action. Write its standard equation & define neutral zone.

Description : State the principle of ON-OFF control action. Write its standard equation & define neutral zone.

Last Answer : This is one of the most common & simplest mode of controller. * It has to control two positions of control element, either on or off hence this mode is called as ON OFF controller, it is ... cycling. * The existence of such a neutral zone is an example of desirable hysteresis in a system.

The standard for long distance analog signal transmission in process control industry is

Description : The standard for long distance analog signal transmission in process control industry is (A) 4-20 mV (B) 0-20 mA (C) 4-20 mA (D) 0-5 V

Last Answer : The standard for long distance analog signal transmission in process control industry is 4-20 mA

In pneumatic control systems the control valve used as final control element converts

Description : In pneumatic control systems the control valve used as final control element converts 

Last Answer : In pneumatic control systems the control valve used as final control element converts pressure signal to position change.

According to U. S. Coast Guard Regulations (46 CFR), the motor controller for a submersible electric motor driven bilge pump should be installed _____________. A. in the shaft alley B. at the submersible bilge pump C. above the uppermost continuous deck D. at the engine room emergency control panel

Description : According to U. S. Coast Guard Regulations (46 CFR), the motor controller for a submersible electric motor driven bilge pump should be installed _____________. A. in the shaft alley B. at the submersible bilge pump C. above the uppermost continuous deck D. at the engine room emergency control panel

Last Answer : Answer: C