What are the advantages of open loop control system?

What are the advantages of open loop control system?

by

1 Answer

Answer :

Open loop control system are simple to design. Open loop control system are generally stable.
by

Related questions

What are the disadvantages of Open loop control system?

Description : What are the disadvantages of Open loop control system?

Last Answer : Open loop control system are less reliable. In open loop control system Optimization is not possible. Open loop control system are less accurate.

What will happen to the gain margin if the gain of the open loop system is doubled?

Description : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

Last Answer : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

If the gain of the open loop system is doubled, the gain margin

Description : If the gain of the open loop system is doubled, the gain margin  (1) Is not affected (2) Gets doubled (3) Becomes half (4) Becomes one -forth

Last Answer : If the gain of the open loop system is doubled, the gain margin Becomes half

What is an example of an open loop system?

Description : What is an example of an open loop system?

Last Answer : Open loop system. Ex. Electric heater, washing machine, fan, electric switch, etc

what is open loop and close loop control system?

Description : what is open loop and close loop control system?

Last Answer : A) In open loop system the input is independent         of output but output is depends on input. A-1. no feedback path in open loop s/m    -2. less accuracy than close loop s/m. Ex. Washing ...    -3. high accuracy. Ex. Air conditioner ( AC ), rocket launcher, radar          system, etc

What are some examples of a closed loop system?

Description : What are some examples of a closed loop system?

Last Answer : C.L s/m. EX. Air conditioner (AC), rocket launcher, radar system, voltage stabilizer etc.

Negative feedback in a closed-loop control system DOES NOT

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

Draw the labeled block diagram of process control system and explain each block.

Description : Draw the labeled block diagram of process control system and explain each block.

Last Answer : Explanation - Process control system consists of process or plant, sensor, error detector, automatic Controller, actuator or control element. 1) Process or plant- process means some manufacturing sequence ... process which changes the process variable. Output of this block is denoted by u .

A differentiator is not usually used in control system, because it : -

Description : A differentiator is not usually used in control system, because it : - (A) reduces damping  (B) increases error  (C) reduces gain margin  (D) increases input noise

Last Answer : A differentiator is not usually used in control system, because it : - increases input noise

A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the

Description : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system (A) crosses the real axis at +0.1 (B) crosses the real axis at -0.1. (C) crosses the imaginary axis at -0.1 (D) crosses the imaginary axis at +0.1

Last Answer : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system crosses the real axis at -0.1.

State advantages and disadvantages of radial distributor system.

Description : State advantages and disadvantages of radial distributor system. 

Last Answer : Advantages of radial distributor system: 1. Design of layout is simple. 2. Capital cost & Erecting cost is less as there is only one feeder. 3. Time required for completion of ... maintain supply to consumers when there is maintenance on feeder. 3. Voltage fluctuations are more.

What are advantages and disadvantages of Mechatronics system?

Description : What are advantages and disadvantages of Mechatronics system? 

Last Answer : Advantages of Mechatronics system:  High level of integration.  Increased functionality and better design.  More use of electronics and software instead of mechanical function.  Assumes ... Its replacement is difficult, that it is difficult to change old system to new system. 

State two advantages of digital system over analog system.

Description : State two advantages of digital system over analog system.

Last Answer : 1. They are less susceptible to noise. 2. The effect of fluctuation in the characteristic of the components, ageing of components etc. is very small in digital circuits. 3. Digital circuits have capability of memory which makes them suitable for computers. 4. More accurate.

State any four advantages of interconnected system.

Description : State any four advantages of interconnected system.

Last Answer : Advantages of interconnected Systems: i) Reduced Overall installed Capacity: Inter connected power systems reduce the overall requirement of installed capacity for a given load area. With ... to interconnection, there is optimum utilization of available natural resources in the country.

What is the advantages of VLSI over discrete system?

Last Answer : VLSI is small and consume less power and its designing is easy.

State any two commands for managing disk space and also state their use

Description : State any two commands for managing disk space and also state their use

Last Answer : There are primarily two commands that can be used for managing Disk space: 1. df 2. du 1. df - disk filesystem df command (short for disk filesystem) is used to show disk utilization ... the disk space used by files on a machine and crucial for disk space management on unix and linux systems.

A control system having unit damping factor will give

Description : A control system having unit damping factor will give  (1) Oscillatory response (2) Undamped response (3) Critically damped response (4) No response

Last Answer : 1

6.30 Consider the state variable model.

Description : Problem number 6.30 from digital control and state variable methods by M Gopal (second edition)

Last Answer : Solution for 6.30​​​​​​

How to Loop a Powerpoint Slideshow ?

Description : How to Loop a Powerpoint Slideshow ?

Last Answer : How to Loop a Powerpoint Slideshow Many conferences, presentations, and meetings tend to last quite a while, and you may need your visual cues to last a little longer. Instead of making ... and attendees occupied, entertained, and well-informed about the goals of your project or your report.

The loop equation for a series RLC circuit gives

Description : The loop equation for a series RLC circuit gives

Last Answer : The loop equation for a series RLC circuit gives

(i) Bilateral Network (ii) Node (iii) Loop (iv) Branch

Description : (i) Bilateral Network (ii) Node (iii) Loop (iv) Branch

Last Answer : (i) Bilateral Network: If the characteristic of network (response or behavior) is independent of the direction of current through its elements in it, then the network is called as a bilateral network e. ... A part of an electric network which lies between two junctions or nodes is known as branch. 

Write the application of the following antennas: 1) Rectangular antenna 2) Dish antenna 3) Horn antenna 4) Loop antenna 5) Yagi-Uda antenna.

Description : Write the application of the following antennas: 1) Rectangular antenna 2) Dish antenna 3) Horn antenna 4) Loop antenna 5) Yagi-Uda antenna. 

Last Answer : Applications:  1.Rectangular antenna  i)Used in Mobile and satellite communication ii)Used in Global Positioning System iii) Used for Radio Frequency Identification (RFID) iv) Radar  Dish ... antenna. 2. Yagi-Uda antenna is used in conditional Access System (CAS) at the decryptor.

Explain how sinusoidal AC voltage is generated by using simple one loop generator.

Description : Explain how sinusoidal AC voltage is generated by using simple one loop generator.

Last Answer : An electric current produced by means of electrical machine is known as generator which converts mechanical energy into electrical energy. When conductor cuts the magnetic flux, emf induced in it. (Faraday' ... upon position of armature. The nature of emf is alternating as shown by the waveform. 

Define- (i) Node (ii) Loop for a DC circuit

Description : Define- (i) Node (ii) Loop for a DC circuit

Last Answer : Ans: i) Node: A point or junction at which two or more elements of network are connected is called as node. ii) Loop: A closed path for flow of current in an electrical circuit is called loop.

Explain the hysteresis loop of a magnetic material with neat diagram.

Description : Explain the hysteresis loop of a magnetic material with neat diagram.

Last Answer : Hysteresis loop of magnetic material:  The circuit arrangement for plotting the hysteresis loop is shown in figure given below. The electromagnetic part consists of a coil wound on the iron ring ... one magnetic reversal is called hysteresis loop. Meaning of hysteresis is to lag behind.

The number of loop equations required to completely analysing a network comprising of 8 independent

Description :  The number of loop equations required to completely analysing a network comprising of 8 independent branches and 6 nodes including the reference node shall be A) 3 B) 2 C) 4 D) 5 

Last Answer :  The number of loop equations required to completely analysing a network comprising of 8 independent branches and 6 nodes including the reference node shall be 3 

Which waves are demodulated by Costas loop?

Description : Which waves are demodulated by Costas loop? A) VSB B) SSB C) MSK D) DSBSC 

Last Answer : Which waves are demodulated by Costas loop? A) VSB B) SSB C) MSK D) DSBSC 

If the area of hysteresis loop of a material is large, the hysteresis loss in this material will be?

Description : If the area of hysteresis loop of a material is large, the hysteresis loss in this material will be?

Last Answer : If the area of hysteresis loop of a material is large, the hysteresis loss in this material will be large.

Murray loop test can be used for location of?

Last Answer : Murray loop test can be used for location of both the ground fault and the short-circuit fault.

The standard for long distance analog signal transmission in process control industry is

Description : The standard for long distance analog signal transmission in process control industry is (A) 4-20 mV (B) 0-20 mA (C) 4-20 mA (D) 0-5 V

Last Answer : The standard for long distance analog signal transmission in process control industry is 4-20 mA

How to Open a Tight Jar Lid

Description : How to Open a Tight Jar Lid

Last Answer : How to Open a Tight Jar Lid There are instances when you buy a stubborn jar of pickles (Learn how to pickle), peanut butter or mayonnaise that you can't open with your hands. It can drive you ... no time. If you enjoy reading this article, you might as well read how to can fruits and vegetables.

How to Open a Can without a Can Opener

Description : How to Open a Can without a Can Opener

Last Answer : How to Open a Can without a Can Opener You're dying to sink your teeth into those canned peaches, but you find yourself without any can opener. At times like this, many people would easily give up ... you'll soon find yourself enjoying the yummy contents of the can. Be careful not to spill the food!

Open-Face Shrimp Melt

Description : Open-Face Shrimp Melt

Last Answer : Open-Face Shrimp Melt - serves 2 Preparation - 15 minutes 3 ounces shelled and deveined cooked small shrimp, cut lengthwise into halves 1/4 cup chopped celery 2 tbsp chopped scallion (green ... baking sheet arrange sandwiches and broil 6 inches from heat source until cheese melts, about 1 minute.

Describe the difference between an open circuit and a short circuit.

Description : Describe the difference between an open circuit and a short circuit.

Last Answer : Open circuit means the wire is cut meaning power will not flow and close circuit means wire is not cut and hence power will flow.Short circuit is the same as close circuit

Why CT is never operated with an open secondary ?

Description : Why CT is never operated with an open secondary ?

Last Answer : CT secondary should never be kept open because it will cause saturation of the core to a high level and very high voltage will appear across the secondary which can breakdown the insulation. One terminal of PT secondary is always grounded to avoid capacitive induction and for human safety

A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is ...

Description : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is (A) 300 W (B) 150 W (C) 45 W (D) 20 W

Last Answer : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is 150 W

An open resistor, when checked with an ohm-meter reads?

Description : An open resistor, when checked with an ohm-meter reads?

Last Answer : An open resistor, when checked with an ohm-meter reads infinite.

It is required to measure the true open circuit e.m.f. of a battery. The best device is?

Last Answer : It is required to measure the true open circuit e.m.f. of a battery. The best device is D.C. potentiometer.

Open circuited armature coil of a D.C. machine is?

Last Answer : Open circuited armature coil of a D.C. machine is identified by the scarring of the commutator segment to which open circuited coil is connected and indicated by a spark completely around the commutator.

If the field winding of an unloaded salient pole synchronous motor is open circuited, the motor will?

Last Answer : If the field winding of an unloaded salient pole synchronous motor is open circuited, the motor will stop.

During open circuit test of a transformer?

Description : During open circuit test of a transformer?

Last Answer : During open circuit test of a transformer primary is supplied rated voltage.

Explain open emitter BJT drive circuit.

Description : Explain open emitter BJT drive circuit.

Last Answer : open emitter BJT drive circuit:

in open circuit or no load test of transformer which side is low voltage side and which side is high voltage side?

Last Answer : Primary side is low voltage side and secondary side is high voltage side.

What is the time response of a system whose poles lie on the right hand side of s-plane?

Description : What is the time response of a system whose poles lie on the right hand side of s-plane? A) Exponentially increasing B) Exponentially decreasing C) Sinusoidal oscillations D) Step response 

Last Answer : What is the time response of a system whose poles lie on the right hand side of s-plane? A) Exponentially increasing B) Exponentially decreasing C) Sinusoidal oscillations D) Step response 

Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Description : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is

Last Answer : Given a unity feedback system with G(s)=k/s (s+4), the value of k for damping ratio of 0.5 is 16

A system is linear if and only if it satisfies

Description : A system is linear if and only if it satisfies

Last Answer : A system is linear if and only if it satisfies principle of superposition and principle of homogeneity

How can the steady-state error in a system be reduced?

Description : How can the steady-state error in a system be reduced?  (1) By decreasing the type of system (2) By increasing system gain (3) By decreasing the static error constant (4) By increasing the input

Last Answer : How can the steady-state error in a system be reduced?  (1) By decreasing the type of system (2) By increasing system gain (3) By decreasing the static error constant (4) By increasing the input

Phase margin is the amount of angle to make the system

Description : Phase margin is the amount of angle to make the system  (1) Oscillatory (2) Stable (3) Unstable (4) Exponential

Last Answer : Phase margin is the amount of angle to make the system Unstable 

In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to

Description : In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to (A) Capacitance C. (B) Inductance L. (C) Resistance R. (D) Inductive reactance XL

Last Answer : In Torque-Voltage analogy, the Moment of Inertia of a mechanical rotational system is analogous to Inductance L.