The initial response when the output is not equal to input is called?

The initial response when the output is not equal to input is called?
by

1 Answer

Answer :

The initial response when the output is not equal to input is called Transient response.

by

Related questions

If stability error for step input and speed of response be the criteria for design, what controller would you

Description : If stability error for step input and speed of response be the criteria for design, what controller would you recommend (1) P controller (2) PD controller (3) PI controller (4) PID controller

Last Answer : If stability error for step input and speed of response be the criteria for design, what controller would you recommend (1) P controller (2) PD controller (3) PI controller (4) PID controller

List any four input and four output devices used with PLC.

Description : List any four input and four output devices used with PLC.

Last Answer : Input device: 1. Push button. 2. Temperature switches. 3. Limit switches. 4. Pressure switches. 5. Level Switches. 6. Proximity Switches. Output devices: 1. Motor. 2. Display. 3. Heater coil. 4. Relay. 5. Lamp. 6. Buzzer.

Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is

Description : Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is (A) causal & linear (B) non-causal & linear (C) causal & non-linear (D) non-causal & non-linear

Last Answer : Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is non-causal & linear

If a step function is applied to the input of a system and the output...

Description : If a step function is applied to the input of a system and the output remains below a certain level for all the time, the system is?

Last Answer : If a step function is applied to the input of a system and the output remains below a certain level for all the time, the system is not necessarily stable.

When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output:

Description : When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output: (1) Has no offset (2) Approaches to triangular waveshape (3) Is pure sinusoidal (4) Is square wave 

Last Answer : When the initial slope of input sine wave is greater than the slew rate of an OPAMP, the output: Approaches to triangular waveshape

select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Description : select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Last Answer : Both the input signal and the feedback signal.

When the initial conditions of a system are specified to be zero it implies that the system is

Description : When the initial conditions of a system are specified to be zero it implies that the system is?

Last Answer : When the initial conditions of a system are specified to be zero it implies that the system is at rest but stores energy.

In a system zero initial condition means that?

Description : In a system zero initial condition means that?

Last Answer : In a system zero initial condition means that The system is at rest and no energy is stored in any of its components.

Zero initial condition for a system means?

Description : Zero initial condition for a system means?

Last Answer : Zero initial condition for a system means system is at rest and no energy is stored in any of its components.

What is the time response of a system whose poles lie on the right hand side of s-plane?

Description : What is the time response of a system whose poles lie on the right hand side of s-plane? A) Exponentially increasing B) Exponentially decreasing C) Sinusoidal oscillations D) Step response 

Last Answer : What is the time response of a system whose poles lie on the right hand side of s-plane? A) Exponentially increasing B) Exponentially decreasing C) Sinusoidal oscillations D) Step response 

A second order system shows 100% overshoot in its unit step response. It can be categorized as

Description : A second order system shows 100% overshoot in its unit step response. It can be categorized as (A) underdamped system. (B) overdamped system. (C) Critically damped system. (D) undamped system.

Last Answer : A second order system shows 100% overshoot in its unit step response. It can be categorized as undamped system.

The damping factor of a particular system is unity, the system response will be

Description : The damping factor of a particular system is unity, the system response will be

Last Answer : The damping factor of a particular system is unity, the system response will be critically damped

_____technique gives quick transient and stability response?

Description : _____technique gives quick transient and stability response?

Last Answer : Root locus technique gives quick transient and stability response.

The transient response of a system is mainly due to?

Description : The transient response of a system is mainly due to?

Last Answer : The transient response of a system is mainly due to stored energy.

The transient response, with feedback system,?

Description : The transient response, with feedback system,?

Last Answer : The transient response, with feedback system, decays quickly.

The response curve for a step input signal from a reactor is called C￾curve. The variance of C-curve in a 'tanks in series model' comprising of 'm' tanks is equal to (A) m (B) 1/m (C) √m (D) m2

Description : The response curve for a step input signal from a reactor is called C￾curve. The variance of C-curve in a 'tanks in series model' comprising of 'm' tanks is equal to (A) m (B) 1/m (C) √m (D) m2

Last Answer : (B) 1/m

Draw the block diagram of discrete input module & explain each block.

Description : Draw the block diagram of discrete input module & explain each block.

Last Answer : Power conversion: It consists of rectifier which converts the incoming AC signal to a pulsating dc level, which is passed through filter and other logic in order to deliver a clean and denounced dc ... Logic section: It passes the input signal to the module s input address LED and the CPU.

What is the steady state error of type-0 system for ramp input?

Description : What is the steady state error of type-0 system for ramp input?  A) ∞ B) A/K C) A/(1+K) D) 0

Last Answer : What is the steady state error of type-0 system for ramp input?  A) ∞ B) A/K C) A/(1+K) D) 0

For a feedback control system of type 2, the steady error for a rap input is

Description : For a feedback control system of type 2, the steady error for a rap input is  A) Infinite B) Constant C) Zero D) Indeterminate

Last Answer : For a feedback control system of type 2, the steady error for a rap input is Zero 

Velocity error constant of a system is measured when the input to the ...

Description : Velocity error constant of a system is measured when the input to the system is unit _______ function.

Last Answer : Velocity error constant of a system is measured when the input to the system is unit ramp function.

_________is the reference input minus the primary feedback.

Description : _________is the reference input minus the primary feedback.

Last Answer : Actuating signal is the reference input minus the primary feedback.

A signal other than the reference input that tends to affect the value of controlled variable is known as ?

Description : A signal other than the reference input that tends to affect the value of controlled variable is known as ?

Last Answer : A signal other than the reference input that tends to affect the value of controlled variable is known as disturbance.

Any externally introduced signal affecting the controlled output is called a?

Description : Any externally introduced signal affecting the controlled output is called a?

Last Answer : Any externally introduced signal affecting the controlled output is called a stimulus.

Draw typical wiring details & four specifications of AC output module of PLC.

Description : Draw typical wiring details & four specifications of AC output module of PLC.

Last Answer : The below figure show the basic field wiring for digital 120V AC output module. The Wiring diagrams show how wires of output devices are connected to screw terminals of PLC modules. As per the wiring ... excessive current from damaging the wiring to the field devices.  Specifications:-

In a closed-loop system in which the output is the speed of a motor, the output rate control can be used to_________.

Last Answer : In a closed-loop system in which the output is the speed of a motor, the output rate control can be used to limit the acceleration of the motor.

A phase lag lead network introduces in the output?

Description : A phase lag lead network introduces in the output?

Last Answer : A phase lag lead network introduces in the output lag at low frequencies and lead at high frequencies.

In a control system the output of the controller is given to?

Description : In a control system the output of the controller is given to?

Last Answer : In a control system the output of the controller is given to final control element.

The output of a feedback control system must be a function of?

Description : The output of a feedback control system must be a function of?

Last Answer : The output of a feedback control system must be a function of reference and output.

A control system in which the control action is somehow dependent on the output is known as

Description : A control system in which the control action is somehow dependent on the output is known as?

Last Answer : A control system in which the control action is somehow dependent on the output is known as Closed loop system.

If the electricity represented by the wave form in 'B' were applied to the left side of the illustrated circuit, the output on the right side would be ____________. EL-0064 A. direct current with the top lead positive with repect to the lower lead B. direct current, half wave rectified with a ripple frequency of 60 hz C. direct current with the top lead negative with repect to the lower lead D. clipped to a value equal to the square root of 3 times the input voltage value

Description : If the electricity represented by the wave form in 'B' were applied to the left side of the illustrated circuit, the output on the right side would be ____________. EL-0064 A. direct current with the ... lower lead D. clipped to a value equal to the square root of 3 times the input voltage value

Last Answer : Answer: C

One diode of a full-wave rectifier has burned out in a shorted condition. Therefore, the output will be ____________. A. zero B. a rectified half-wave C. a rectified full-wave D. equal to the AC input

Description : One diode of a full-wave rectifier has burned out in a shorted condition. Therefore, the output will be ____________. A. zero B. a rectified half-wave C. a rectified full-wave D. equal to the AC input

Last Answer : Answer: D

A full-wave rectifier has one diode burned out in an open condition, what will be the output characteristic of the device? A. Zero B. Half-wave rectified C. Full-wave rectified D. Equal to the AC input

Description : A full-wave rectifier has one diode burned out in an open condition, what will be the output characteristic of the device? A. Zero B. Half-wave rectified C. Full-wave rectified D. Equal to the AC input

Last Answer : Answer: B

If the two input signals to a difference amplifier are equal in amplitude but neither in phase nor 180 degrees out of phase, what will the output signal be?

Description : If the two input signals to a difference amplifier are equal in amplitude but neither in phase nor 180 degrees out of phase, what will the output signal be?

Last Answer : . A different shape than the input signals but larger in amplitude.

If the two input signals to a difference amplifier are equal in amplitude and 180 degrees out of phase, what will the output signal be?

Description : If the two input signals to a difference amplifier are equal in amplitude and 180 degrees out of phase, what will the output signal be?

Last Answer : Equal in shape and frequency to each input signal and larger in amplitude by two times than

. If the two input signals of a difference amplifier are in phase and equal in amplitude, what will the output signal be?

Description : . If the two input signals of a difference amplifier are in phase and equal in amplitude, what will the output signal be?

Last Answer : No output (the signals will "cancel out").

A 4-input neuron has weights 1, 2, 3 and 4. The transfer function is linear with the constant of proportionality being equal to 2. The inputs are 4, 10, 5 and 20 respectively. The output will be: a) 238 b) 76 c) 119 d) 123

Description : A 4-input neuron has weights 1, 2, 3 and 4. The transfer function is linear with the constant of proportionality being equal to 2. The inputs are 4, 10, 5 and 20 respectively. The output will be: a) 238 b) 76 c) 119 d) 123

Last Answer : a) 238

In successive-approximation A/D converter, offset voltage equal to 1/2 LSB is added to the D/A converter’s output. This is done to (A) Improve the speed of operation. (B) Reduce the maximum quantization error. (C) Increase the number of bits at the output. (D) Increase the range of input voltage that can be converted

Description : In successive-approximation A/D converter, offset voltage equal to 1/2 LSB is added to the D/A converter's output. This is done to (A) Improve the speed of operation. (B) Reduce the maximum ... Increase the number of bits at the output. (D) Increase the range of input voltage that can be converted

Last Answer : (B) Reduce the maximum quantization error.

Can the respondent in a divorce change their initial response to the petition for divorce?

Description : Can the respondent in a divorce change their initial response to the petition for divorce?

Last Answer : You can talk to your lawyer. You maybe able to amend or add something but contact your lawyer.

Which of the following statement(s) is/are true concerning the pulmonary response to shock? a. The acute pulmonary vascular response to shock differs markedly from that of systemic vasculature b. The pulmonary edema of ARDS occurs in the face of elevated left heart pressures c. The initial physiologic changes of ARDS involve the capillary endothelial cells and the type I pneumocyte d. Mechanisms proposed in the pathogenesis of ARDS include injury from mediators of inflammation elsewhere and from activated cellular elements e. A decrease in lung compliance may result from the loss of type I pneumocytes

Description : Which of the following statement(s) is/are true concerning the pulmonary response to shock? a. The acute pulmonary vascular response to shock differs markedly from that of systemic vasculature b. The ... elements e. A decrease in lung compliance may result from the loss of type I pneumocytes

Last Answer : Answer: c, d, e Contributing pathophysiologic processes to the pulmonary manifestations of shock include the pulmonary component of the cardiovascular response, disruption of the normal ... injury from mediators of inflammation elaborated elsewhere, and from activated cellular blood elements

Which of the following statement(s) is/are true concerning the microvascular and cellular response to shock? a. Osmodically induced mobilization of intracellular fluid is the initial response to restore intravascular volume b. With larger volume hemorrhagic shock deterioration of normal cellular transmembrane potential occurs resulting in an increase in extracellular sodium and water c. The accumulation of anaerobic metabolites override normal homeostatic vasomotor tone and contribute to the maladaptive vasodilatation d. Abnormal intracellular calcium homeostasis may contribute to the cellular dysfunction of shock

Description : Which of the following statement(s) is/are true concerning the microvascular and cellular response to shock? a. Osmodically induced mobilization of intracellular fluid is the initial ... d. Abnormal intracellular calcium homeostasis may contribute to the cellular dysfunction of shock

Last Answer : Answer: c, d Moderate hypovolemia results in a relatively rapid spontaneous restitution of intravascular volume through expansion of the plasma space. This plasma expansion by ... potassium pump. Cellular dysfunction also appears to be related to abnormal intracellular calcium homeostasis

Which of the following statement(s) is/are true concerning the antibody response to an invading antigen? a. All antibodies are composed of one type of heavy and one type of light protein chain b. The carboxyl terminus of the heavy chain is the antigen binding site c. Antibody of the immunoglobulin G class is the initial antibody produced in response to an antigenic stimulus d. Immunoglobulins A, D, and E play an active role in the circulating humoral response

Description : Which of the following statement(s) is/are true concerning the antibody response to an invading antigen? a. All antibodies are composed of one type of heavy and one type of light protein chain b. ... stimulus d. Immunoglobulins A, D, and E play an active role in the circulating humoral response

Last Answer : Answer: a Humoral defenses consist of antibody (immunoglobulin; Ig) and complement. All Ig classes (IgM, IgG, IgA, IgE, IgD) and IgG subclasses are composed of one type (M, G, A, E, D ... exist in smaller amounts in the circulation and do not appear to play a major role as host defense components

Which of the following statements concerning perioperative nutrition is true concerning the above-described patient? a. Since the patient’s weight had been stable with no preoperative nutritional deficit, 5% dextrose intravenous solutions are adequate for the initial postoperative source of nutrition b. Preoperative immunologic status should be determined including total peripheral lymphocyte count and delayed hypersensitivity reaction to determine skin-test response to common antigens c. Routine postoperative fluid administration with intravenous 5% glucose solutions can provide the calories to meet basal energy requirements d. A jejunal feeding catheter should be placed at the time of surgery for postoperative enteral feeding

Description : Which of the following statements concerning perioperative nutrition is true concerning the above-described patient? a. Since the patient's weight had been stable with no preoperative nutritional deficit ... feeding catheter should be placed at the time of surgery for postoperative enteral feeding

Last Answer : Answer: a Most patients undergoing elective operations are adequately nourished. Unless the patient has suffered significant preoperative malnutrition, characterized by weight loss greater than ... gastrointestinal surgery, this technique would not appear indicated in the patient described above

Which of the following statements are true of the multiple organ dysfunction syndrome (MODS)? A. The “two-hit” model proposes that secondary MODS may be produced when even a relatively minor second insult reactivates, in a more amplified form, the systemic inflammatory response that was primed by an initial insult to the host. B. The systemic inflammatory response syndrome (SIRS), shock due to sepsis or SIRS, and MODS may be regarded as a continuum of illness severity. C. Prolonged stimulation or activation of Kupffer cells in the liver is thought to be a critical factor in the sustained, uncontrolled release of inflammatory mediators. D. The incidence of MODS in intensive care units has decreased owing to increased awareness, prevention, and treatment of the syndrome.

Description : Which of the following statements are true of the multiple organ dysfunction syndrome (MODS)? A. The two-hit model proposes that secondary MODS may be produced when even a relatively ... intensive care units has decreased owing to increased awareness, prevention, and treatment of the syndrome.

Last Answer : Answer: ABC DISCUSSION: MODS is part of a clinical continuum that begins with the systemic inflammatory response syndrome, which is the host's stress response to any major insult such ... pathogenesis of MODS, the incidence of MODS continues to increase without a significant improvement in outcome

A patient has developed a sever chest pain and difficulties in breathing while in the dental chair. Your initial response is: a. Administer glycerine trinitrate and monitor patient in upright position. b. Patient has an acute episode of angina as demonstrated by curve in ECG c. No treatment is required until confirmed as MI by ECG d. Patient has myocardial infarction as confirmed by ECG

Description : A patient has developed a sever chest pain and difficulties in breathing while in the dental chair. Your initial response is: a. Administer glycerine trinitrate and monitor patient in upright ... required until confirmed as MI by ECG d. Patient has myocardial infarction as confirmed by ECG

Last Answer : a. Administer glycerine trinitrate and monitor patient in upright position.

A patient has developed a sever chest pain and difficulties in breathing while in the dental chair. Your initial response is: A. Administer glycerine trinitrate and monitor patient in upright position B. Patient has an acute episode of angina as demonstrated by curve in ECG C. No treatment is required until confirmed as MI by ECG D. Patient has myocardial infarction as confirmed by ECG

Description : A patient has developed a sever chest pain and difficulties in breathing while in the dental chair. Your initial response is: A. Administer glycerine trinitrate and monitor patient in upright ... required until confirmed as MI by ECG D. Patient has myocardial infarction as confirmed by ECG

Last Answer : A. Administer glycerine trinitrate and monitor patient in upright position

What is true of DOTS strategy for treatment of tuberculosis: A. It consists of an initial intensive phase and a later continuation phase B. The dose of antitubercular drugs is reduced after clinical response occurs C. The patient himself is made responsible for administering antitubercular drugs D. All of the above are correct

Description : What is true of DOTS strategy for treatment of tuberculosis: A. It consists of an initial intensive phase and a later continuation phase B. The dose of antitubercular drugs is reduced ... patient himself is made responsible for administering antitubercular drugs D. All of the above are correct

Last Answer : A. It consists of an initial intensive phase and a later continuation phase

Which of the following sorting algorithm has the running time that is least dependant on the initial ordering of the input? a) Insertion sort b) Quick sort c) Merge sort d) Selection sort

Description : Which of the following sorting algorithm has the running time that is least dependant on the initial ordering of the input? a) Insertion sort b) Quick sort c) Merge sort d) Selection sort

Last Answer : d) Selection sort

Poles are real and negative and equal then the system is _____ damped system

Description : Poles are real and negative and equal then the system is _____ damped system   (a) Undamped (b) Underdamped (c) Critically damped (d) Overdamped

Last Answer : Poles are real and negative and equal then the system is Critically damped damped system 

Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

__________ is the response curve for a step input signal from a reactor. (A) S-curve (B) C-curve (C) I-curve (D) None of these

Description : __________ is the response curve for a step input signal from a reactor. (A) S-curve (B) C-curve (C) I-curve (D) None of these

Last Answer : (B) C-curve