What is a mts frame axial torsional machine

What is a mts frame axial torsional machine
by

1 Answer

Answer :

by

Related questions

Struts are load carrying members of a frame structure which are subjected to (A) Axial tension loads (B) Axial compressive loads (C) Torsional loads (D) Transverse loads

Description : Struts are load carrying members of a frame structure which are subjected to  (A) Axial tension loads  (B) Axial compressive loads  (C) Torsional loads  (D) Transverse loads 

Last Answer : (B) Axial compressive loads 

Ties are load carrying members of a frame, which are subjected to (A) Transverse loads (B) Axial tension loads (C) Axial compressive loads (D) Torsional loads

Description : Ties are load carrying members of a frame, which are subjected to  (A) Transverse loads  (B) Axial tension loads  (C) Axial compressive loads  (D) Torsional loads 

Last Answer : (B) Axial tension loads 

When the helical compression spring is subjected to axial compressive force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Description : When the helical compression spring is subjected to axial compressive force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Last Answer : (D) Torsional shear stress

When the helical extension spring is subjected to axial tensile force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Description : When the helical extension spring is subjected to axial tensile force, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Last Answer : (D) Torsional shear stress

How would you convert .mts files into smaller h264-files - keeping the same file structure?

Description : How would you convert .mts files into smaller h264-files - keeping the same file structure?

Last Answer : answer:

How to upload, play & edit .MTS format video?

Description : How to upload, play & edit .MTS format video?

Last Answer : answer:I don't have much experience with digital cameras, but I can that that Any Video Converter has worked pretty well for me in the past. It should be able to change the .mts files to .avi, .wmv, ... Luck! [edit] and .mts is listed as a supported format, so you really shouldn't have any trouble.

How can I convert a AVCHD (.MTS) file to a MOV file on a non-Intel PowerMac G5 or Windows XP pc? FREE?

Description : How can I convert a AVCHD (.MTS) file to a MOV file on a non-Intel PowerMac G5 or Windows XP pc? FREE?

Last Answer : http://www.moviesmac.com/video-converter-mac/, this may solve the problem.

A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Description : A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Last Answer : e. 4?/3 m/s

A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Last Answer : e. 60.1 mts

A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Description : A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Last Answer : c. 502 rad/min2

In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Description : In a slider crank mechanism, the crank is rotating at 200 rpm. If length of connecting rod is 8 mts and crank shaft is 2 mts, velocity of crosshead at 30? rotation of crank shaft equals. a.30.2 m/s b.33.2 m/s c.35.8 mts/s d.107 dynes e.25.5 m/s

Last Answer : e. 25.5 m/s

If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Description : If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Last Answer : d. 932,000 kg

What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Description : What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Last Answer : c. 78.94 mts/sec2

Your an FBI agent and you are assigned to the case of a murder. A man named Julious Jill was murderered by someone in the house. At least that's what people say. You are to interview everyone that was in the house on Sunday at 6:30pm. You interview the kids first you ask them 'what were you doing on Sunday at 6:30' the kids said we were playing with our toys. You interview the wife and you ask the same thing. The wife says she was cleaning the kids room because the maid said she was going out with friends. So Mts. Jill said she will clean. Next you ask the maid what she was doing the maid says she was getting the mail. Who murderered Mr. Jill? -Riddles

Description : Your an FBI agent and you are assigned to the case of a murder. A man named Julious Jill was murderered by someone in the house. At least that's what people say. You are to interview everyone that ... maid what she was doing the maid says she was getting the mail. Who murderered Mr. Jill? -Riddles

Last Answer : The maid: the maid said she was getting the mail on a Sunday the mail doesn't come on Sundays and she lied to Mrs. Jill about going out with friends.

What kind of MTS service ?

Description : What kind of MTS service ?

Last Answer : Postal service.

What is the full form of MTS ?

Description : What is the full form of MTS ?

Last Answer : Full MTS Mobile Training Scheme.

What is the full form of MTS ?

Description : What is the full form of MTS ?

Last Answer : Multi-Threaded Server, Message Transfer System, Member of Technical Staff etc.

In the lever method water can be lifted from shallow wells to a height of ______ a. 8 mts b. 3.5 to 4.5 mts c. 7- 10 mts d. 12 mts

Description : In the lever method water can be lifted from shallow wells to a height of ______ a. 8 mts b. 3.5 to 4.5 mts c. 7- 10 mts d. 12 mts

Last Answer : b. 3.5 to 4.5 mts

Well irrigation is popular where depth of the water table doesn’t exceed a. 15 mts b. 12 mts c. 20 mts d. 14 mts

Description : Well irrigation is popular where depth of the water table doesn’t exceed a. 15 mts b. 12 mts c. 20 mts d. 14 mts

Last Answer : a. 15 mts

Last flag man is deputed at which distance from last detonator during protection of welding site . (i) 30 mts (ii) 50 mts (iii) 45 (iv) 60 mts

Description : Last flag man is deputed at which distance from last detonator during protection of welding site . (i) 30 mts (ii) 50 mts (iii) 45 (iv) 60 mts

Last Answer : (iv) 60 mts

Winner of 100 mts. (Men) in 2008 Beijing Olympic Games

Description : Winner of 100 mts. (Men) in 2008 Beijing Olympic Games

Last Answer : Ans. Asafa Powell (Jamaica)

In Triple jump distance between the take off board and landing area shall be not more than. (a) 9 mts. (b) 10 mts. (c) 13 mts (d) 11 mts.

Description : In Triple jump distance between the take off board and landing area shall be not more than. (a) 9 mts. (b) 10 mts. (c) 13 mts (d) 11 mts.

Last Answer : (c) 13 mts

Landing area of long jump event should be. (a) 10x2.75 mts (b) 9x3 mts (c) 9x4 mts (d) 9x2.75 mts.

Description : Landing area of long jump event should be. (a) 10x2.75 mts (b) 9x3 mts (c) 9x4 mts (d) 9x2.75 mts.

Last Answer : (d) 9x2.75 mts.

Landing area of Pole vault event should be. (a) 6x4 mts (b) 5x3 mts (c) 5x4 mts (d) 5x5 mts.

Description : Landing area of Pole vault event should be. (a) 6x4 mts (b) 5x3 mts (c) 5x4 mts (d) 5x5 mts.

Last Answer : (d) 5x5 mts.

Landing area of High jump event should be. (a) 5x2 mts (b) 5x3 mts (c) 5x4 mts (d) 5x5 mts.

Description : Landing area of High jump event should be. (a) 5x2 mts (b) 5x3 mts (c) 5x4 mts (d) 5x5 mts.

Last Answer : (b) 5x3 mts

Standard width of the lane shall be. (a) 1.20 mts (b) 1.22 mts (c) 1.22 to 1.25 mts. (d) 110 mts.

Description : Standard width of the lane shall be. (a) 1.20 mts (b) 1.22 mts (c) 1.22 to 1.25 mts. (d) 110 mts.

Last Answer : (c) 1.22 to 1.25 mts.

The following are the standard distance of hurdler Race for men. (a) 100 & 400 mts. (b) 110 & 400 mts. (c) 80 & 200 mts. (d) All of these.

Description : The following are the standard distance of hurdler Race for men. (a) 100 & 400 mts. (b) 110 & 400 mts. (c) 80 & 200 mts. (d) All of these.

Last Answer : (b) 110 & 400 mts.

When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt field coil before testing C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Description : When using a megohmmeter to determine which shunt field coil is grounded in a DC machine, you must ____________. A. insulate the field frame from the ship's hull B. disconnect each shunt ... C. use a motor driven high capacity megohmmeter D. remove all main line lead connections before testing

Last Answer : Answer: B

To carry out an insulation resistance test, one terminal of the megohmmeter should be connected to the winding, with the other terminal being connected to the ____________________. A. power supply B. variable resistor C. frame of the machine D. armature

Description : To carry out an insulation resistance test, one terminal of the megohmmeter should be connected to the winding, with the other terminal being connected to the ____________________. A. power supply B. variable resistor C. frame of the machine D. armature

Last Answer : Answer: C

The stator of a D.C. machine comprises of (a) main poles (6) interpoles (c) frame (d) all of the above

Description : The stator of a D.C. machine comprises of (a) main poles (6) interpoles (c) frame (d) all of the above

Last Answer : (d) all of the above

James Hargreaves invented a machine known as...................... (a) Flying Shuttle loom (b) Spinning Jenny (c) Mule (d) Water Frame

Description : James Hargreaves invented a machine known as...................... (a) Flying Shuttle loom (b) Spinning Jenny (c) Mule (d) Water Frame

Last Answer : (b) Spinning Jenny

The minimum torsional strain developed in butane is at dihedral angle (s)

Description : The minimum torsional strain developed in butane is at dihedral angle (s)

Last Answer : The minimum torsional strain developed in butane is at dihedral angle (s) A. `0^(º), 108^(º)` B. `120^(@), 240^ ... (@)` D. `60^(@), 120^(@), 180^(@)`

Which of the following is associated with Torsional strain?

Description : Which of the following is associated with Torsional strain?

Last Answer : Which of the following is associated with Torsional strain? A. Repulsion between bond pair of ... Bond angle strain D. Attraction of opposite charges

The spokes of the flywheel are subjected to 1. direct shear stress 2. torsional shear stress 3. tensile stress 4. compressive stress

Description : The spokes of the flywheel are subjected to 1. direct shear stress 2. torsional shear stress 3. tensile stress 4. compressive stress

Last Answer : 3. tensile stress

The rim of the flywheel is subjected to, 1. direct tensile stress and bending stress 2. torsional shear stress and bending stress 3. direct shear stress and bending stress 4. compressive stress and bending stress

Description : The rim of the flywheel is subjected to, 1. direct tensile stress and bending stress 2. torsional shear stress and bending stress 3. direct shear stress and bending stress 4. compressive stress and bending stress

Last Answer : 1. direct tensile stress and bending stress

The spokes of the flywheel are subjected to, (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Description : The spokes of the flywheel are subjected to, (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Last Answer : (C) Tensile stress

The rim of the flywheel is subjected to, (A) Direct tensile stress and bending stress (B) Torsional shear stress and bending stress (C) Direct shear stress and bending stress

Description : The rim of the flywheel is subjected to, (A) Direct tensile stress and bending stress (B) Torsional shear stress and bending stress (C) Direct shear stress and bending stress

Last Answer : (A) Direct tensile stress and bending stress

Torsional shear stresses are induced in the spring wire when (A) spring is under compression (B) spring is under tension (C) both (A) and (B) (D) none of the above

Description : Torsional shear stresses are induced in the spring wire when (A) spring is under compression (B) spring is under tension (C) both (A) and (B) (D) none of the above

Last Answer : (C) both (A) and (B)

When the helical torsion spring is subjected to torque, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Description : When the helical torsion spring is subjected to torque, the type of stress induced in the spring wire is, (A) Tensile stress (B) Compressive stress (C) Bending stress (D) Torsional shear stress

Last Answer : (C) Bending stress

The helical spring ad wire of helical torsion spring, both are subjected to torsional shear stresses. a) True b) False

Description : The helical spring ad wire of helical torsion spring, both are subjected to torsional shear stresses. a) True b) False

Last Answer : b) False

If a circular shaft is welded to the plate by means of circumferential fillet, then the shaft is subjected to torsional moment M. If throat of weld is t, then torsional shear stress is given by a) M/2πtr2 b) M/πtr2 c) M/4πtr2 d) None of the listed

Description : If a circular shaft is welded to the plate by means of circumferential fillet, then the shaft is subjected to torsional moment M. If throat of weld is t, then torsional shear stress is given by a) M/2πtr2 b) M/πtr2 c) M/4πtr2 d) None of the listed

Last Answer : a) M/2πtr2

The following bracket is welded to the vertical column. The joint undergoes torsional stresses. a) True b) False

Description : The following bracket is welded to the vertical column. The joint undergoes torsional stresses. a) True b) False

Last Answer : b) False

When a nut is tightened by placing a washer below it, the threads of bolt are subjected to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Description : When a nut is tightened by placing a washer below it, the threads of bolt are subjected to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Last Answer : (A) Direct shear stress

While designing screw threads, adequate length of engaged threads between the screw and nut is provided so as to prevent failure of threads due to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Description : While designing screw threads, adequate length of engaged threads between the screw and nut is provided so as to prevent failure of threads due to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Last Answer : (A) Direct shear stress

When a nut is tightened by placing a washer below it, the shank of bolt is subjected to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Description : When a nut is tightened by placing a washer below it, the shank of bolt is subjected to (A) Direct shear stress (B) Torsional shear stress (C) Tensile stress (D) Compressive stress

Last Answer : (C) Tensile stress

Find the shear stress in a flange at the junction of hub in rigid flanged coupling if torsional moment is 2980N-m and diameter of hub being 125mm. Also the thickness of flange is 25mm. a) 6.77N/mm2 b) 10.24N/mm2 c) 4.84N/mm2 d) 4.22N/mm2

Description : Find the shear stress in a flange at the junction of hub in rigid flanged coupling if torsional moment is 2980N-m and diameter of hub being 125mm. Also the thickness of flange is 25mm. a) 6.77N/mm2 b) 10.24N/mm2 c) 4.84N/mm2 d) 4.22N/mm2

Last Answer : c) 4.84N/mm2

The hub is treated as a solid shaft while calculating torsional shear stress in the hub. a) True b) False

Description : The hub is treated as a solid shaft while calculating torsional shear stress in the hub. a) True b) False

Last Answer : b) False

Calculate the shaft diameter on rigidity basis if torsional moment is 196000N-mm, length of shaft is 1000mm. Permissible angle of twist per meter is 0.5’ and take G=79300N/mm2. a) None of the listed b) 41.2mm c) 35.8mm d) 38.8mm

Description : Calculate the shaft diameter on rigidity basis if torsional moment is 196000N-mm, length of shaft is 1000mm. Permissible angle of twist per meter is 0.5’ and take G=79300N/mm2. a) None of the listed b) 41.2mm c) 35.8mm d) 38.8mm

Last Answer : b) 41.2mm

While designing shaft on the basis of torsional rigidity, angle of twist is given by? a) Ml/Gd4 b) 584Ml/Gd4 c) 292 Ml/Gd4 d) None of the mentioned

Description : While designing shaft on the basis of torsional rigidity, angle of twist is given by? a) Ml/Gd4 b) 584Ml/Gd4 c) 292 Ml/Gd4 d) None of the mentioned

Last Answer : b) 584Ml/Gd4

When the shaft is subjected to pure torsional moment, the torsional stress is given by? a) None of the listed b) 32M/πdɜ c) 16M/πdɜ d) 8M/πdɜ

Description : When the shaft is subjected to pure torsional moment, the torsional stress is given by? a) None of the listed b) 32M/πdɜ c) 16M/πdɜ d) 8M/πdɜ

Last Answer : c) 16M/πdɜ