Will it work somehow?

1 Answer

Answer :

Yes you can. There are a number of ceramic adhesives. It also holds up well if the procedure is followed.

Related questions

Description : Is it possible to glue a deep cut with Krazy Glue?

Last Answer : I would be more comfortable with her using bandaids. If there are bacteria in the wound now, you may be seaing them in if you glue it closed.

Description : Ecologists: What is statistically proven to help out the environment more? Paper plates, or washing ceramics?

Last Answer : answer:The bottom lines from a lengthy discussion of the variables and complexities: In most cases the reusable plates and the dishwasher will win over disposables. Disposables do have their place ... dishwasher, perhaps the committed few can organize and volunteer for dish patrol. The Tree Hugger

Description : I'm searching for classes in my city about being a good housewife [cleaning], flower arrangement, ceramics, and scrapbooking. Help me find resources?

Last Answer : Try the adult ed division of your local community college, an arts center or a community center. They often will have classes like this.

Description : What is the name of the store in North Beach (SF) that sells decorated mediterranean ceramics?

Last Answer : I don’t know the name of the store,but it sounds like the ceramic style you are looking for is known as “Majolica” or “Maiolica”.Good luck :)

Description : Fancy ceramics with roses on them - how do i figure out the brand?

Last Answer : Noritake used an M in a circle. I'll see if I can find a link. Here try this to start. I used to own a consignment/antique store and did all sorts of research on marks. It can be quite difficult ... of fun. You can also go to the library and look at antique pottery books to look for marks. have fun!

Description : Seiko takes pottery classes from two different studios. Paulas pottery charges $18 for clay and charges $10 per hour. Sallys ceramics charges $4 for clay and charges $12 per hour. After how many hours will the studios cost the same?

Last Answer : .

Description : If I make a ceramic statue and don't burn it because I don't have a kiln, will it harden too? Thank you

Last Answer : Yes dries and hardens. However, if it absorbs moisture or gets wet, it will soften again.

Description : Is it possible to do ceramic things if I don't have a kiln? For example in the oven? But it's probably low temperature huh?

Last Answer : Ceramics (depending on the type of clay and glaze) need temperatures above 1000 ° C (up to 1250 ° C) - you will reach a maximum of less than 300 ° C in the oven. If you have space, ... -mala-vysokozarna-pec-na-vypalovani-keramiky-drevem.html). If not, look around for the pottery that the kiln has.

Description : What is the test commonly used to determine the strength properties of ceramics?

Last Answer : What is the answer ?

Description : What provider would have the best business credit card for my ceramics company?

Last Answer : Capital One would have the best business card for your ceramics company because they offer easy-access credit cards for business. Its part of their new initiative to encourage start up companies, take advantage while you still can!

Description : Ceramics for Everyone?

Last Answer : In most communities you'll find studios where one can spend an afternoon or evening enjoying the satisfying and creative process involved in doing ceramics. This is an easy to learn craft in ... wait. Your artistic side will be rewarded with great decorator items for yourself and your friends.

Description : Which of the following is not used as a nuclear fuel cladding material? (A) Zircaloy (B) Cadmium (C) Ceramics (D) Stainless steel

Last Answer : (B) Cadmium

Description : write short notes on (a) Laser (b) Nuclear reactor (c) Ceramics

Last Answer : a. Laser Laser is a device which generates the coherent light or "well organised" light .Ordinary white light is made up of many different colours. Each colour has different wavelength and the photons of ... reactor (PWR) 4. Heavy water reactor (HWR) 5. High-temperature Gas-Cooled reactor (HTGR)

Description : Define any five of the following terms. a) Biogas b) Geothermal energy c) Vaccine d) Antibiotic e) Ceramics f) Light year

Last Answer : a) Biogas: Biogas is the result of the controlled microbial breakdown of organic materials such as animal manures or food scraps in an anaerobic digester.Biogas is a mixture of about 60-70% methane (natural ... 10 trillion km. More precisely, one light-year is equal to 9,500,000,000,000 kilometers.

Description : Combination of metals and ceramics are called (A) Metalloy (B) Cermets (C) Pellets (D) Non-crystalline ceramics

Last Answer : (B) Cermets

Description : The characteristic of ceramics is

Last Answer : shaping-drying-firing.

Description : The material added to ceramics to add strength is

Last Answer : feldspar.

Description : The word ‘ceramics’ is derived from the Greek word ‘Keramos’. Meaning

Last Answer : burnt earth.

Description : Mention the advantage of the following raw material in ceramics.

Last Answer : Additive No 1 Clay 3 QuartzAdvantage Porous, desired shape, becomes hard on heating Cracking can be controlled as it does not absorb water Cracking can be controlled as it does not absorb water Feldspar Gives smoother, glossy finish. It also adds strength

Description : Write one similar character between glass and ceramics.

Last Answer : Glass and ceramic melt at 1073K and both are brittle.

Description : Mention the uses of ceramics.

Last Answer : a) Ceramics are used as insulators (like fuse, sparkplugs etc). b) They are used to replace steel in ball bearings. c) They are used in spare parts for gas turbine engines. d) They ... as substitutes to replace plastic cups. i) They are used in musical instruments like Ghatam, Jalatarang etc.

Description : What is the characteristic of all ceramics manufacture?

Last Answer : Shaping – drying – firing is the characteristic of all ceramic manufacture.

Description : What is glazing of ceramics?

Last Answer : The process of making the clay products into non-porous shining material is called Glazing.

Description : What are the raw materials used in the manufacture of ceramics?

Last Answer : Clay like kaolinite and bentonite, Flint, White clay, Quartz and feldspar.

Description : What is ceramics?

Last Answer : The products that are prepared out of specific mud are called ceramics.

Description : Flywheel are generally made from (A) Cast Iron (B) High strength steel (C) Ceramics (D) All of the above

Last Answer : (D) All of the above

Description : Identify a good dielectric. a) Iron b) Ceramics c) Plastic d) Magnesium

Last Answer : b) Ceramics

Description : Which of the following are conductors? a) Ceramics b) Plastics c) Mercury d) Rubber

Last Answer : c) Mercury

Description : Ceramics are produced from silicates or clayish materials: Which of the following is not a ceramic material? (A) Slag cement (B) Glasses (C) Porcelain/Potteries (D) Teflon

Last Answer : (D) Teflon

Description : Which class of material would you classify Nylon a) Fibres b) Polymer c) Ceramics d) Glass

Last Answer : b) Polymer

Description : Ceramics are good (A) insulators. (B) conductors. (C) superconductors. (D) semiconductors.

Last Answer : (A) insulators.

Description : List any four properties of ceramics.

Last Answer : Properties of ceramics:  High Strength. High Fracture Toughness. High Hardness. Excellent Wear Resistance. Good Frictional Behavior. Anti-Static

Description : Write down industrial importance of following ceramics. i) Silicon carbide ii) Aluminium oxide.

Last Answer : Industrial importance of: i) Silicon carbide: 1. It is used in car brakes and clutches. 2. Ceramic plates in bulletproof vests 3. Bearings 4. Semiconductors wafer processing equipment 5. ... . Cutting tools 3. Artificial bones and teeth 4. Engine and turbine parts 5. Thermometry sensors

Description : Give any two engineering applications of ceramics.

Last Answer : Engineering applications of ceramics:  Ans : Ceramics are used for following engineering applications , 1. Cutting io and dies 2. Molten metal filters 3. Bearings 4. Sealing rings 5. Bushes ... 35. Bullet proof vests 36. Thread processing nozzles , oiling nozzles , rollers and twister parts.

Description : Strong and ductile materials (a) Polymers (b) Ceramics (c) Metals (d) Semiconductors

Last Answer : (c) Metals

Description : Figure out the odd statement about ceramics in the following (a) Good insulators of heat and electricity (b) Usually less desire than metals (c) Ductile in nature (d) Contains both metallic and nonmetallic elements  

Last Answer : (c) Ductile in nature

Description : Name the clay mineral produced by the alteration of potash feldspar which is also used in ceramics.

Last Answer : ANSWER: KAOLINITE 

Description : Polymerics and ceramics membrane materials

Last Answer : Polymerics and ceramics membrane materials:  Polymeric membrane materials. All polymers can be used as barrier or membrane material but the chemical and physical properties differ so much that only ... membranes.  Eg Aluminium oxide / Alumina, Silicon carbide, Titanium dioxide / Titania

Description : State the properties and application of ceramics.

Last Answer : Following are the properties of Ceramic Material:  i. Ceramics are inorganic in nature & non metallic material. ii. Brittle material. iii. Insulation to flow of electric current iv. ... Nuclear engineering x. aerospace field xi. Electronic control devices xii. computers xiii. structures 

Description : The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to   (A) Polarization (B) Conductivity (C) Structural homogeneties (D) Ionization

Last Answer : The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to Conductivity 

Description : Have you used all-weather glue outdoors, and if so what kind?

Last Answer : Liquid Nail might be a good product. It usually comes in a caulking tube, do will require a caulking gun. I've only used it in my region (America South.) So. I know that it works in high temperatures, ... , but can't speak for it's durability in 10°... it it's probably good at that temperature too.

Description : What is good to remove stains from purple glue for PVC pipes??? it is on my refrigerator?

Last Answer : It’s actually pvc primer. Oatey clear cleaner on a quick search. That purple mess is notoriously hard to remove.

Description : Is there an inexpensive or reasonably priced adhesive/glue for glass?

Last Answer : answer:Do you mean for a craft project or for a house/large project? For craft projects, I like Beacon 527 glue. I don’t know if it’s good for large projects – it comes in a tube a bit smaller than a toothpaste tube.

Description : Name something you would try to retrieve from a glue trap and risk getting stuck?

Last Answer : My graduation certificate.

Description : I need to glue stuff in a park?

Last Answer : Self-adhesive Velcro or glue-gun Velcro, prior to the party, to the ribbons and where the reins would attach, same with the eyes. It might work.

Description : Will my hair get damaged if I use glue to attach hair extensions?

Last Answer : Mine got damage a bit but the results were pretty fun.

Description : Does glue in hair extensions damage your natural hair?

Last Answer : They did damage my hair a little but looked great in. They are a pain to take care of though. You have to use a special brush so you don't pull them out. When they start coming loose its hard to ... out and that's how I think I damaged my hair. If you have thm professionally removed it might be ok.

Description : What kind of glue will bond a plastic resin to metal? (Details)

Last Answer : answer:Either a gel-type cyanoacrylate glue (like this), or a 5-minute epoxy (like this) would do it. Neither of these requires air to dry, which is crucial when you’re bonding impermeable materials. They’re both easily available in big-box hardware stores.

Description : Can someone tell me which adhesive glue is the best for crafts and do it yourself projects?

Last Answer : answer:You need different kinds of glue for different jobs and materials. You are not going to find a all in one glue that is worth its salt. For plastic I would go with rubber cement, for gems or ... of glue you can buy, as it would have long crushed any competition, just on word of mouth alone.

Description : How do I super-glue a Converse?

Last Answer : Maybe try rubber cement instead.