State the properties and application of ceramics.

State the properties and application of ceramics.
by

1 Answer

Answer :

Following are the properties of Ceramic Material: 

i. Ceramics are inorganic in nature & non metallic material.

ii. Brittle material.

iii. Insulation to flow of electric current

iv. Withstand high temperature.

v. Rock like appearance

vi. Hardness

vii. Corrosion resistance

viii. Opaque to light

Following are the Application of Ceramic Material: 

i. Tiles,

ii. sanitary ware,

iii. insulators,

iv. semiconductors,

v. fuel elements in nuclear power plant,

vi. cutting tools,

vii. concrete and

viii. Variety of glasses.

ix. Nuclear engineering

x. aerospace field

xi. Electronic control devices

xii. computers

xiii. structures 
by

Related questions

State two properties and applications of copper.

Description : State two properties and applications of copper.

Last Answer : Properties :-  1) Soft, ductile, malleable 2) Excellent resistance to corrosion 3) Non magnetic 4) Good machinability 5) Can be brazed ,soldered or welded 6) Resistance to fatigue and abrasion ... automobile radiator 3) Screw machine parts 4) Household utensils 5) Wires ,sheet ,tubes etc. 

State the effects of chromium and molybdenum on the properties of steel.

Description : State the effects of chromium and molybdenum on the properties of steel.

Last Answer : 1) Chromium: i) It improves Ductility ii) It is added in different proportions upto 18 % iii) Below 1.5 % addition increases Tensile Strength iv) 12 % addition gives high ... iii) It improves Thermal Resistance iv) It gives ability to maintain Mechanical Properties at Elevated Temperatures

State the composition and properties of Babbit metal.

Description : State the composition and properties of Babbit metal.

Last Answer : Composition: Sn = 88% Sb = 8% Cu =4% Properties: i) It is silvery white, soft metal alloy. ii) It has very low coefficient of friction. iii) It has very high corrosion and wear and tear ... is used for making engine bearing. ii) It is also used as a common bearing metal in cast iron boxes.

State the meaning of 18-4-1 H.S.S.? State it's properties.

Description : State the meaning of 18-4-1 H.S.S.? State it's properties.

Last Answer : 18-4-1 High Speed Steels : - It Contains 18 % Tungsten, 4 % Chromium, 1 % Vanadium With 0.75 % Carbon & Remaining Iron. Properties of 18-4-1 High speed steel: 1. Red ... 7. Resistance to decarburization 8. Little risk of cracking during hardening 9. Definite cooling rate during hardening

What is the test commonly used to determine the strength properties of ceramics?

Description : What is the test commonly used to determine the strength properties of ceramics?

Last Answer : What is the answer ?

List any four properties of ceramics.

Description : List any four properties of ceramics.

Last Answer : Properties of ceramics:  High Strength. High Fracture Toughness. High Hardness. Excellent Wear Resistance. Good Frictional Behavior. Anti-Static

Write four properties of Ceramic Materials and give it’s applications in automobile industry.

Description : Write four properties of Ceramic Materials and give it’s applications in automobile industry.

Last Answer : Properties of Ceramic Material: i. Inorganic & non -metallic material. ii. Brittle material. iii. Insulation to flow of electric current iv. Withstand high temperature. v. Rock like appearance vi. Hardness ... mica etc. 7. In I.C. engines and turbines as armor plates. 8. In cutting tools 

Explain the effect of nickel, chromium, silicon, molybdenum addition on the properties of steel.

Description : Explain the effect of nickel, chromium, silicon, molybdenum addition on the properties of steel.

Last Answer : 1) Effect of Nickel as alloying Element: i) Provides toughness, corrosion resistance, and deep hardening. ii) Increases resistance to impact iii ) Improves tensile strength 2. Effect ... temper brittleness. iv) increases strength. V0 Mo-carbides help increase creepresistance at elevated temps

Enlist four properties of Magnesium AlloyAZ31 and also give it’s applictions.

Description : Enlist four properties of Magnesium AlloyAZ31 and also give it’s applictions. 

Last Answer : Properties of Magnesium AlloyAZ31: 1) An extremely light metal, 2) This alloys are of Excellent Specific Strength, 3) Excellent Sound Damping Capabilities, 4) Good ... 6) Excellent Machinability Applications: Electronics, Aerospace, Transportation Industries &Sports Industries, etc.

List two important properties of Cutting Fluids.

Description : List two important properties of Cutting Fluids.

Last Answer : Properties of Cutting Fluid: 1. High heat absorption 2. Good lubricating qualities to produce low coefficient of friction 3. Low viscosity to permit free flow of liquid 4. Non-corrosive to the work or ... to the skin of operator 8. Transparency so that the cutting action of the tool may be observed 

State various types of Cast Iron and give application of each.

Description : State various types of Cast Iron and give application of each. 

Last Answer : There are four basic types of Cast Iron - (1) White Cast Iron: Applications: Lifter Bars, Shell Liners in Grinding Mills, Pumps, Balls and Rings of Coal Pulverisers, etc. (2) Gray Cast Iron. ... Parts, Anchor of Ships, etc. (4) Malleable Cast Iron. Applications: Pots Pans and utensils, etc.

List the basic types of rubber. Give one application of each.

Description : List the basic types of rubber. Give one application of each. 

Last Answer : Basic types of rubber with application  A) Natural rubber Applications :- 1) Belts, 2. Shoe, 3. Coatings, 4. Packaging, 5. Soles, 6. Automobile tyres, 7. Seals and gaskets, 8. Chemical ... 7. Tubeless tire liners, Inner tubes 8. Stoppers for glass bottles, 9. Medicine bottles, and pharmaceuticals 

State any two advantages and disadvantages of foundry process

Description : State any two advantages and disadvantages of foundry process

Last Answer : Following are the advantages of foundry process:  i. It one of the most versatile manufacturing process. ii. Castings provide uniform directional properties. iii. Intricate shaped parts can be ... casting process, skilled operators are required. v. Internal defects are not identified easily. 

State the need of advanced material in making of automobile components.

Description : State the need of advanced material in making of automobile components.

Last Answer : The general finding highlights the need for developing material systems methodology and for approaching research issues in terms of material life cycles.  Improved materials and material ... Modeling of material system. Materials system research, Lightweight material for body structure.

Explain the importance of pattern allowances and state various pattern allowances.

Description : Explain the importance of pattern allowances and state various pattern allowances. 

Last Answer : Pattern Allowances are Important Because: 1. Solid contraction can be reduced by providing more allowance on patterns. 2. When a pattern is drawn from a mould, there is always some ... allowance iii. Machining allowance iv. Distortion or camber allowance v. Shake allowance / rapping allowance

Ecologists: What is statistically proven to help out the environment more? Paper plates, or washing ceramics?

Description : Ecologists: What is statistically proven to help out the environment more? Paper plates, or washing ceramics?

Last Answer : answer:The bottom lines from a lengthy discussion of the variables and complexities: In most cases the reusable plates and the dishwasher will win over disposables. Disposables do have their place ... dishwasher, perhaps the committed few can organize and volunteer for dish patrol. The Tree Hugger

I'm searching for classes in my city about being a good housewife [cleaning], flower arrangement, ceramics, and scrapbooking. Help me find resources?

Description : I'm searching for classes in my city about being a good housewife [cleaning], flower arrangement, ceramics, and scrapbooking. Help me find resources?

Last Answer : Try the adult ed division of your local community college, an arts center or a community center. They often will have classes like this.

What is the name of the store in North Beach (SF) that sells decorated mediterranean ceramics?

Description : What is the name of the store in North Beach (SF) that sells decorated mediterranean ceramics?

Last Answer : I don’t know the name of the store,but it sounds like the ceramic style you are looking for is known as “Majolica” or “Maiolica”.Good luck :)

Fancy ceramics with roses on them - how do i figure out the brand?

Description : Fancy ceramics with roses on them - how do i figure out the brand?

Last Answer : Noritake used an M in a circle. I'll see if I can find a link. Here try this to start. I used to own a consignment/antique store and did all sorts of research on marks. It can be quite difficult ... of fun. You can also go to the library and look at antique pottery books to look for marks. have fun!

Seiko takes pottery classes from two different studios. Paulas pottery charges $18 for clay and charges $10 per hour. Sallys ceramics charges $4 for clay and charges $12 per hour. After how many hours will the studios cost the same?

Description : Seiko takes pottery classes from two different studios. Paulas pottery charges $18 for clay and charges $10 per hour. Sallys ceramics charges $4 for clay and charges $12 per hour. After how many hours will the studios cost the same?

Last Answer : .

Is it possible to glue ceramics?

Description : Will it work somehow?

Last Answer : Yes you can. There are a number of ceramic adhesives. It also holds up well if the procedure is followed.

Does ceramics harden without firing?

Description : If I make a ceramic statue and don't burn it because I don't have a kiln, will it harden too? Thank you

Last Answer : Yes dries and hardens. However, if it absorbs moisture or gets wet, it will soften again.

Does ceramics have to be fired in a kiln?

Description : Is it possible to do ceramic things if I don't have a kiln? For example in the oven? But it's probably low temperature huh?

Last Answer : Ceramics (depending on the type of clay and glaze) need temperatures above 1000 ° C (up to 1250 ° C) - you will reach a maximum of less than 300 ° C in the oven. If you have space, ... -mala-vysokozarna-pec-na-vypalovani-keramiky-drevem.html). If not, look around for the pottery that the kiln has.

What provider would have the best business credit card for my ceramics company?

Description : What provider would have the best business credit card for my ceramics company?

Last Answer : Capital One would have the best business card for your ceramics company because they offer easy-access credit cards for business. Its part of their new initiative to encourage start up companies, take advantage while you still can!

Ceramics for Everyone?

Description : Ceramics for Everyone?

Last Answer : In most communities you'll find studios where one can spend an afternoon or evening enjoying the satisfying and creative process involved in doing ceramics. This is an easy to learn craft in ... wait. Your artistic side will be rewarded with great decorator items for yourself and your friends.

Which of the following is not used as a nuclear fuel cladding material? (A) Zircaloy (B) Cadmium (C) Ceramics (D) Stainless steel

Description : Which of the following is not used as a nuclear fuel cladding material? (A) Zircaloy (B) Cadmium (C) Ceramics (D) Stainless steel

Last Answer : (B) Cadmium

write short notes on (a) Laser (b) Nuclear reactor (c) Ceramics

Description : write short notes on (a) Laser (b) Nuclear reactor (c) Ceramics

Last Answer : a. Laser Laser is a device which generates the coherent light or "well organised" light .Ordinary white light is made up of many different colours. Each colour has different wavelength and the photons of ... reactor (PWR) 4. Heavy water reactor (HWR) 5. High-temperature Gas-Cooled reactor (HTGR)

Define any five of the following terms. a) Biogas b) Geothermal energy c) Vaccine d) Antibiotic e) Ceramics f) Light year

Description : Define any five of the following terms. a) Biogas b) Geothermal energy c) Vaccine d) Antibiotic e) Ceramics f) Light year

Last Answer : a) Biogas: Biogas is the result of the controlled microbial breakdown of organic materials such as animal manures or food scraps in an anaerobic digester.Biogas is a mixture of about 60-70% methane (natural ... 10 trillion km. More precisely, one light-year is equal to 9,500,000,000,000 kilometers.

Combination of metals and ceramics are called (A) Metalloy (B) Cermets (C) Pellets (D) Non-crystalline ceramics

Description : Combination of metals and ceramics are called (A) Metalloy (B) Cermets (C) Pellets (D) Non-crystalline ceramics

Last Answer : (B) Cermets

The characteristic of ceramics is

Description : The characteristic of ceramics is

Last Answer : shaping-drying-firing.

The material added to ceramics to add strength is

Description : The material added to ceramics to add strength is

Last Answer : feldspar.

The word ‘ceramics’ is derived from the Greek word ‘Keramos’. Meaning

Description : The word ‘ceramics’ is derived from the Greek word ‘Keramos’. Meaning

Last Answer : burnt earth.

Mention the advantage of the following raw material in ceramics.

Description : Mention the advantage of the following raw material in ceramics.

Last Answer : Additive No 1 Clay 3 QuartzAdvantage Porous, desired shape, becomes hard on heating Cracking can be controlled as it does not absorb water Cracking can be controlled as it does not absorb water Feldspar Gives smoother, glossy finish. It also adds strength

Write one similar character between glass and ceramics.

Description : Write one similar character between glass and ceramics.

Last Answer : Glass and ceramic melt at 1073K and both are brittle.

Mention the uses of ceramics.

Description : Mention the uses of ceramics.

Last Answer : a) Ceramics are used as insulators (like fuse, sparkplugs etc). b) They are used to replace steel in ball bearings. c) They are used in spare parts for gas turbine engines. d) They ... as substitutes to replace plastic cups. i) They are used in musical instruments like Ghatam, Jalatarang etc.

What is the characteristic of all ceramics manufacture?

Description : What is the characteristic of all ceramics manufacture?

Last Answer : Shaping – drying – firing is the characteristic of all ceramic manufacture.

What is glazing of ceramics?

Description : What is glazing of ceramics?

Last Answer : The process of making the clay products into non-porous shining material is called Glazing.

What are the raw materials used in the manufacture of ceramics?

Description : What are the raw materials used in the manufacture of ceramics?

Last Answer : Clay like kaolinite and bentonite, Flint, White clay, Quartz and feldspar.

What is ceramics?

Description : What is ceramics?

Last Answer : The products that are prepared out of specific mud are called ceramics.

Flywheel are generally made from (A) Cast Iron (B) High strength steel (C) Ceramics (D) All of the above

Description : Flywheel are generally made from (A) Cast Iron (B) High strength steel (C) Ceramics (D) All of the above

Last Answer : (D) All of the above

Identify a good dielectric. a) Iron b) Ceramics c) Plastic d) Magnesium

Description : Identify a good dielectric. a) Iron b) Ceramics c) Plastic d) Magnesium

Last Answer : b) Ceramics

Which of the following are conductors? a) Ceramics b) Plastics c) Mercury d) Rubber

Description : Which of the following are conductors? a) Ceramics b) Plastics c) Mercury d) Rubber

Last Answer : c) Mercury

Ceramics are produced from silicates or clayish materials: Which of the following is not a ceramic material? (A) Slag cement (B) Glasses (C) Porcelain/Potteries (D) Teflon

Description : Ceramics are produced from silicates or clayish materials: Which of the following is not a ceramic material? (A) Slag cement (B) Glasses (C) Porcelain/Potteries (D) Teflon

Last Answer : (D) Teflon

Which class of material would you classify Nylon a) Fibres b) Polymer c) Ceramics d) Glass

Description : Which class of material would you classify Nylon a) Fibres b) Polymer c) Ceramics d) Glass

Last Answer : b) Polymer

Ceramics are good (A) insulators. (B) conductors. (C) superconductors. (D) semiconductors.

Description : Ceramics are good (A) insulators. (B) conductors. (C) superconductors. (D) semiconductors.

Last Answer : (A) insulators.

Write down industrial importance of following ceramics. i) Silicon carbide ii) Aluminium oxide.

Description : Write down industrial importance of following ceramics. i) Silicon carbide ii) Aluminium oxide.

Last Answer : Industrial importance of: i) Silicon carbide: 1. It is used in car brakes and clutches. 2. Ceramic plates in bulletproof vests 3. Bearings 4. Semiconductors wafer processing equipment 5. ... . Cutting tools 3. Artificial bones and teeth 4. Engine and turbine parts 5. Thermometry sensors

Give any two engineering applications of ceramics.

Description : Give any two engineering applications of ceramics.

Last Answer : Engineering applications of ceramics:  Ans : Ceramics are used for following engineering applications , 1. Cutting io and dies 2. Molten metal filters 3. Bearings 4. Sealing rings 5. Bushes ... 35. Bullet proof vests 36. Thread processing nozzles , oiling nozzles , rollers and twister parts.

Strong and ductile materials (a) Polymers (b) Ceramics (c) Metals (d) Semiconductors

Description : Strong and ductile materials (a) Polymers (b) Ceramics (c) Metals (d) Semiconductors

Last Answer : (c) Metals

Figure out the odd statement about ceramics in the following (a) Good insulators of heat and electricity (b) Usually less desire than metals (c) Ductile in nature (d) Contains both metallic and nonmetallic elements

Description : Figure out the odd statement about ceramics in the following (a) Good insulators of heat and electricity (b) Usually less desire than metals (c) Ductile in nature (d) Contains both metallic and nonmetallic elements  

Last Answer : (c) Ductile in nature

Name the clay mineral produced by the alteration of potash feldspar which is also used in ceramics.

Description : Name the clay mineral produced by the alteration of potash feldspar which is also used in ceramics.

Last Answer : ANSWER: KAOLINITE