What are the raw materials used in the manufacture of ceramics?

What are the raw materials used in the manufacture of ceramics?
by

1 Answer

Answer :

Clay like kaolinite and bentonite, Flint, White clay, Quartz and feldspar.
by

Related questions

What is the characteristic of all ceramics manufacture?

Description : What is the characteristic of all ceramics manufacture?

Last Answer : Shaping – drying – firing is the characteristic of all ceramic manufacture.

The raw materials used in glass manufacture are

Description : The raw materials used in glass manufacture are

Last Answer : soda ash, lime stone and sand.

Name the raw materials required for the manufacture of glass.

Description : Name the raw materials required for the manufacture of glass.

Last Answer : a) Soda Ash (Na 2 CO 3 ) b) Lime stone (CaCO 3 ) c) Sand (SiO 2 ) d) Broken pieces of glass (Cullets)

Raw materials used for the manufacture of glass are – (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Description : Raw materials used for the manufacture of glass are – (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Last Answer : (1) sand, soda, limestone Explanation: Quartz sand (silica) is the main raw material in commercial glass production. While fused quartz (primarily composed of SiO2) is used for some special ... over 1200 degree C (2192 degree F). Normally, other substances are added to simplify processing.

Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Raw materials for nitric acid manufacture are (A) Hydrogen peroxide, air and water (B) Anhydrous ammonia and air (C) Anhydrous ammonia, air and water (D) Wet ammonia, air and water

Description : Raw materials for nitric acid manufacture are (A) Hydrogen peroxide, air and water (B) Anhydrous ammonia and air (C) Anhydrous ammonia, air and water (D) Wet ammonia, air and water

Last Answer : (C) Anhydrous ammonia, air and water

Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron

Description : Raw materials required for the manufacture of __________ is acetylene and hydrochloric acid. (A) Phthalic anhydride (B) Vinyl chloride (C) Maleic anhydride (D) Dacron

Last Answer : (B) Vinyl chloride

Raw materials for 'Solvay Process' for manufacture of the soda ash are (A) Salt, limestone and coke or gas(B) Ammonia, salt and limestone(C) Ammonia limestone and coke(D) None of these

Description : Raw materials for 'Solvay Process' for manufacture of the soda ash are (A) Salt, limestone and coke or gas (B) Ammonia, salt and limestone (C) Ammonia limestone and coke (D) None of these

Last Answer : (A) Salt, limestone and coke or gas

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both temperature and pressure in the digestor is less in case of the sulphite method as compared to that in the sulphate method (D) None of these

Description : Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both ... in case of the sulphite method as compared to that in the sulphate method (D) None of these

Last Answer : (D) None of these

For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Description : For the manufacture of Portland cement, the proportions of raw materials used, are (A) Lime 63% ; silica 22% ; other ingredients 15% (B) Lime 22% ; silica 63% ; other ingredients 15% (C) Silica 40% ; lime 40% ; other ingredients 20% (D) Silica 70% ; lime 20% ; other ingredients 10%

Last Answer : Answer: Option A

Raw materials used for the manufacture of glass are (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda

Description : Raw materials used for the manufacture of glass are (1) sand, soda, limestone (2) sand, charcoal, soda (3) limestone, charcoal, sulphur (4) sand, sulphur, soda 

Last Answer : sand, soda, limestone

Mention the advantage of the following raw material in ceramics.

Description : Mention the advantage of the following raw material in ceramics.

Last Answer : Additive No 1 Clay 3 QuartzAdvantage Porous, desired shape, becomes hard on heating Cracking can be controlled as it does not absorb water Cracking can be controlled as it does not absorb water Feldspar Gives smoother, glossy finish. It also adds strength

Ceramics are produced from silicates or clayish materials: Which of the following is not a ceramic material? (A) Slag cement (B) Glasses (C) Porcelain/Potteries (D) Teflon

Description : Ceramics are produced from silicates or clayish materials: Which of the following is not a ceramic material? (A) Slag cement (B) Glasses (C) Porcelain/Potteries (D) Teflon

Last Answer : (D) Teflon

Strong and ductile materials (a) Polymers (b) Ceramics (c) Metals (d) Semiconductors

Description : Strong and ductile materials (a) Polymers (b) Ceramics (c) Metals (d) Semiconductors

Last Answer : (c) Metals

Polymerics and ceramics membrane materials

Description : Polymerics and ceramics membrane materials

Last Answer : Polymerics and ceramics membrane materials:  Polymeric membrane materials. All polymers can be used as barrier or membrane material but the chemical and physical properties differ so much that only ... membranes.  Eg Aluminium oxide / Alumina, Silicon carbide, Titanium dioxide / Titania

The raw material used to manufacture ethyl alcohol is

Description : The raw material used to manufacture ethyl alcohol is

Last Answer : molasses.

Wood is the main raw material for the manufacture of ------? A. Paint B. Gun powder C. Paper (Answer) D. Ink

Description : Wood is the main raw material for the manufacture of ------? A. Paint B. Gun powder C. Paper (Answer) D. Ink

Last Answer : C. Paper (Answer)

Which woody raw material is used for the manufacture of paper pulp? A. Cotton B. Poplar (Answer) C. Bagasse D. Rice straw

Description : Which woody raw material is used for the manufacture of paper pulp? A. Cotton B. Poplar (Answer) C. Bagasse D. Rice straw

Last Answer : B. Poplar (Answer)

Which one of the following raw material is used in the manufacture of foam used in mattresses cushions etc. A. Phenol B. Urea C. Methanol D. Ethanol

Description : Which one of the following raw material is used in the manufacture of foam used in mattresses cushions etc. A. Phenol B. Urea C. Methanol D. Ethanol

Last Answer : ANSWER: A

Caprolactam, a raw material for the manufacture of nylon-6, isproduced from(A) Phenol(B) Naphthalene(C) Benzene(D) Pyridine

Description : Caprolactam, a raw material for the manufacture of nylon-6, isproduced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

What are the raw material used for the manufacture of washing soda by solvay process ?

Description : What are the raw material used for the manufacture of washing soda by solvay process ?

Last Answer : Ans. Nacl, CaCO3 and NH3

Starting raw material for the manufacture of Maleic anhydride is (A) n-butene (B) Benzene (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Starting raw material for the manufacture of Maleic anhydride is (A) n-butene (B) Benzene (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

. Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Last Answer : (B) < 10

Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Description : Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Description : Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Last Answer : (A) Iron oxide

Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Description : Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Last Answer : (A) Sulphuric acid

rting raw material for the manufacture of alum is(A) Alumina(B) Gypsum(C) Bauxite(D) Ammonium bicarbonate

Description : rting raw material for the manufacture of alum is (A) Alumina (B) Gypsum (C) Bauxite (D) Ammonium bicarbonate

Last Answer : (C) Bauxite

In the manufacture of viscose rayon, the raw material used industrially is (A) Eucalyptus wood (B) Bamboo (C) Bagasse (D) Fine teak wood

Description : In the manufacture of viscose rayon, the raw material used industrially is (A) Eucalyptus wood (B) Bamboo (C) Bagasse (D) Fine teak wood

Last Answer : (D) Fine teak wood

Phosphate rock is a raw material for the manufacture of (A) Phosphoric acid (B) Phosphorous (C) Superphosphates (D) All (A), (B) and (C)

Description : Phosphate rock is a raw material for the manufacture of (A) Phosphoric acid (B) Phosphorous (C) Superphosphates (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Description : Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Last Answer : (D) Caustic soda

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

Carbon tetrachloride (CCl4 ) is the starting raw material for the manufacture of (A) Trichloroethylene (B) Perchloroethylene (C) Parathion (D) Methanol

Description : Carbon tetrachloride (CCl4 ) is the starting raw material for the manufacture of (A) Trichloroethylene (B) Perchloroethylene (C) Parathion (D) Methanol

Last Answer : (B) Perchloroethylene

Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Description : Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Last Answer : (B) 50

Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2

Last Answer : Option A

The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Description : The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Last Answer : Answer: Option C

What kinds of materials are used to manufacture lamp shades?

Description : What kinds of materials are used to manufacture lamp shades?

Last Answer : Plastic is the main material used in lampshades. Some more expensive lamps do use a cloth like material.

What are the materials used to manufacture the brushes for slip rings of an induction motor?

Description : What are the materials used to manufacture the brushes for slip rings of an induction motor?

Last Answer : A:The slip rings are made of brass and phosphor bronze. The brushes are made of metal graphite which is an alloy of copper and carbon.

Calcareous & argillaceous materials are used in the manufacture of (A) Lead (B) Cement (C) Carbon disulphide (D) None of these

Description : Calcareous & argillaceous materials are used in the manufacture of (A) Lead (B) Cement (C) Carbon disulphide (D) None of these

Last Answer : (B) Cement

Pick out the wrong statement pertaining to the soap manufacture. (A) Transparent soaps are made by cold process (B) Organic pigments are used as colouring materials in the soap manufacture (C) Both laundry as well as toilet soaps are manufactured by hot process (D) Colourless rosin is used in the manufacture of laundry soaps

Description : Pick out the wrong statement pertaining to the soap manufacture. (A) Transparent soaps are made by cold process (B) Organic pigments are used as colouring materials in the soap manufacture (C) ... soaps are manufactured by hot process (D) Colourless rosin is used in the manufacture of laundry soaps

Last Answer : (A) Transparent soaps are made by cold process

Digestion of wood-base materials (for manufacture of pulp) is done to (A) Remove lignin (B) Produce long fibres (C) Prevent deterioration on storage (D) None of these

Description : Digestion of wood-base materials (for manufacture of pulp) is done to (A) Remove lignin (B) Produce long fibres (C) Prevent deterioration on storage (D) None of these

Last Answer : (A) Remove lignin

In the manufacture of cement, the dry of wet mixtue of calcareous and argillaceous materials is burnt in a (a) A Rotary kiln (b) A Grinder (c) Country kiln (d) All the above

Description : In the manufacture of cement, the dry of wet mixtue of calcareous and argillaceous materials is burnt in a (a) A Rotary kiln (b) A Grinder (c) Country kiln (d) All the above

Last Answer : (a) A Rotary kiln

Calcareous and argillaceous materials used in manufacture of cement consists of (a) Lime stone (b) Chalk (c) Shales (d) All the above

Description : Calcareous and argillaceous materials used in manufacture of cement consists of (a) Lime stone (b) Chalk (c) Shales (d) All the above

Last Answer : (d) All the above

Which ofthe following materials is used in the manufacture of resistance grids to be used in the starters of large motors ? (a) Copper (b) Aluminium (c) Steel (d) Cast-iron

Description : Which ofthe following materials is used in the manufacture of resistance grids to be used in the starters of large motors ? (a) Copper (b) Aluminium (c) Steel (d) Cast-iron

Last Answer : (d) Cast-iron

Which of the following materials are used in the manufacture of pig iron from iron ore? w) Limestone and carbon x) Calcium oxide and oxygen y) Chromium and nickel z) Oxygen and sulfur dioxide

Description : Which of the following materials are used in the manufacture of pig iron from iron ore? w) Limestone and carbon x) Calcium oxide and oxygen y) Chromium and nickel z) Oxygen and sulfur dioxide

Last Answer : ANSWER: W -- LIMESTONE AND CARBON

Which of the following are alloying materials used the manufacture of stainless steel? w) Limestone and carbon x) Calcium oxide and oxygen y) Oxygen and sulfur dioxide z) Chromium and nickel

Description : Which of the following are alloying materials used the manufacture of stainless steel? w) Limestone and carbon x) Calcium oxide and oxygen y) Oxygen and sulfur dioxide z) Chromium and nickel

Last Answer : ANSWER: Z -- CHROMIUM AND NICKEL

The characteristic of ceramics is

Description : The characteristic of ceramics is

Last Answer : shaping-drying-firing.

The material added to ceramics to add strength is

Description : The material added to ceramics to add strength is

Last Answer : feldspar.

The word ‘ceramics’ is derived from the Greek word ‘Keramos’. Meaning

Description : The word ‘ceramics’ is derived from the Greek word ‘Keramos’. Meaning

Last Answer : burnt earth.

Write one similar character between glass and ceramics.

Description : Write one similar character between glass and ceramics.

Last Answer : Glass and ceramic melt at 1073K and both are brittle.