Load capacity of a vertically erected tram 15 x 26 cm

Vertical oak trams, size 15 X 26 cm, about 80 cm high above the ground, concrete 80 cm below the ground. R   
by

1 Answer

Answer :

It depends on which direction the load will act. If vertically down, the load could be estimated at several tons.
by

Related questions

A stone of wight 100 kg is thrown vertically upwards by a man of height y = 1.8 m with an initial velocity of 20 m/sec. The maximum height to which it will rise would be a.22.2 m b.26 m c.15.1 m d.20.2 m e.10 m

Description : A stone of wight 100 kg is thrown vertically upwards by a man of height y = 1.8 m with an initial velocity of 20 m/sec. The maximum height to which it will rise would be a.22.2 m b.26 m c.15.1 m d.20.2 m e.10 m

Last Answer : a. 22.2 m

For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Description : For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Last Answer : Answer: Option D

Was the Appliance Service Center clandestinely erected to replace the Library at Alexandria as depository for/of world knowledge?

Description : Was the Appliance Service Center clandestinely erected to replace the Library at Alexandria as depository for/of world knowledge?

Last Answer : Yes and they are secretly stealing everyones left sock to get everyones DNA to finance the endeavor. Those fiends.

Am 45 and my penis is not getting erected in the morning as it used to be? What can I do to enhance my testeron and get better stamina, energy and erection?

Description : Am 45 and my penis is not getting erected in the morning as it used to be? What can I do to enhance my testeron and get better stamina, energy and erection?

Last Answer : See a urologist immediately, and do exactly what s/he advises.

Monuments erected during Islamic Period: 

Description : Monuments erected during Islamic Period: 

Last Answer : Find the odd one out: Monuments erected during Islamic Period: (a) Quwwat-i-Islam (b) Qutub Minar (c) Alai Darwaza (d) Qawwali

Ashoka erected many pillars.

Description : Ashoka erected many pillars.

Last Answer : Explain the following Statements with reason: Ashoka erected many pillars.

Where is 'Raisina Hills'? (1) Where Rashtrapati Bhavan is situated (2) The Hill feature in Srinagar, otherwise known as 'Shankara-charya Hill' (3) The place where the (3) Dogra rulers of J & K built their fort in Jammu. (4) The rock feature at Kanya-kumari where Swami Vive-kananda's statue was erected.

Description : Where is 'Raisina Hills'? (1) Where Rashtrapati Bhavan is situated (2) The Hill feature in Srinagar, otherwise known as 'Shankara-charya Hill' (3) The place where the (3) Dogra rulers of J & K ... fort in Jammu. (4) The rock feature at Kanya-kumari where Swami Vive-kananda's statue was erected.

Last Answer : (1) Where Rashtrapati Bhavan is situated Explanation: Raisina Hill is an area of Lutyens' Delhi, New Delhi. housing India's most important government buildings, including Rashtrapati Bhavan ... and the Secretariat building housing the Prime Minister's Office and several other important ministries.

Pick up the incorrect statement from the following for allowing workers to enter sewers A. The particular manhole and one manhole on upstream and one manhole on downstream should remain open for 30 minutes B. Proper tests for the presence of poisonous gases must be carried out C. The men entering the manhole should be advised to smoke in the sewer D. Warning signals should be erected

Description : Pick up the incorrect statement from the following for allowing workers to enter sewers A. The particular manhole and one manhole on upstream and one manhole on downstream should remain open for 30 ... entering the manhole should be advised to smoke in the sewer D. Warning signals should be erected

Last Answer : ANS: C

In which conditions a scaffold cannot be erected?

Description : In which conditions a scaffold cannot be erected?

Last Answer : Extreme weather(Strong wind, rain, Ice), ground not stable, safe clearance (minimum feet) can’t be maintained with live wire, certified workers and supervisor are not available permit is available.

A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a time factor 0.20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Description : A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a ... 20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Last Answer : Answer: Option C

Whose last words, as reported in his obituary in The Times, were alleged to have been: “Be natural my children. For the writer that is natural has fulfilled all the rules of art.”? His will stipulated that no memorial be erected to honour him.

Description : Whose last words, as reported in his obituary in The Times, were alleged to have been: “Be natural my children. For the writer that is natural has fulfilled all the rules of art.”? His will stipulated that no memorial be erected to honour him.

Last Answer : Charles Dickens.

Where is ‘Raisina Hills’? (1) Where Rashtrapati Bhavan is situated (2) The Hill feature in Srinagar, otherwise known as ‘Shankara-charya Hill’ (3) The place where the Dogra rulers of J & K built their fort in Jammu. (4) The rock feature at Kanyakumari where Swami Vivekananda’s statue was erected.

Description : Where is ‘Raisina Hills’? (1) Where Rashtrapati Bhavan is situated (2) The Hill feature in Srinagar, otherwise known as ‘Shankara-charya Hill’ (3) The place where the Dogra rulers of J & K built their fort in Jammu. (4) The rock feature at Kanyakumari where Swami Vivekananda’s statue was erected. 

Last Answer : Where Rashtrapati Bhavan is situated

In what year was the tram car invented ?

Last Answer : Tram car was invented in 1858.

Who invented the tram ?

Last Answer : The tram was invented by John Francis.

When does the tram take precedence?

Description : What is the correct order in the situation shown in the image below? [img alt_text = 'when the tram has priority' description = ''] https:///wp-content/uploads/2017/03/villamod.png [/ img]

Last Answer : The correct passing order is ABC. The "A" vehicle is traveling straight, so you cannot turn ahead of the "C" vehicle due to the electric or right-hand rule. Since the vehicle marked "C" would cross its tram route with a change of direction, it should give priority to the tram.     

What brand was the first tram in Budapest?

Description : We know that the Russians manufactured the first metro trains we used in Hungary, but what was the first tram in Budapest? [img alt_text = 'what was the first tram in budapest' description = ''] https:///wp-content/uploads/2017/01/dunabaesettvill.jpg [/ img]

Last Answer : The first trams in Budapest were manufactured by Siemens and Halske and put into operation on November 28, 1887. By the way, Budapest was the first tram in Europe within the city. 

What is a spinning tram?

Description : As a countryside, I would like to know what the much-mentioned spinning tram is.

Last Answer : The intertwined tram network in Buda is a transport development project, the aim of which is to develop the tram network in Buda, to create north-south through lines by building missing sections. ... the intertwining of trams and to the intertwining of tracks to be built under the Margaret Bridge.

What kind of driver's license do I need for a tram?

Description : What kind of driver's license do I need if I want to ride a tram?

Last Answer : Driving license

How many volts does the tram run?

Description : How much current would I need to get it going?

Last Answer : The power supply network is 600 VDC or 750 VDC - as where. The power (or power input) of individual trams can be found here - http://www.tramvaj.cz/tramvaje/. But - what current is enough to just start? - I have no clue...

Why does trolleybus have 2 trolleys and a tram one?

Last Answer : Because the tram has tracks instead of one ´wire´ ...: o

Does a driver's license for a tram work?

Description : Or is it enough to have a driver's license for a car? I didn't notice the tram running like a driving school.

Last Answer : Driving a car is of course a condition and then a course is taken to drive the tram. There are even continuing courses of a different type, each with its own specifics. Pay more attention, such a training tram is marked and there is an instructor next to the driver.

Tram drive

Description : Why does the tram have only one cable on top of it?

Last Answer : that's enough. the other conductor is the track. the trolleybus does not have tracks, so it needs two wires above each other (trolley). (tuxedo)

How does a tram get electricity?

Description : The tram has the collector at the top, but it only gets - or + no? How is it possible that he goes for it? He has to take + i - at the same time.

Last Answer : No need to learn more: http://en.wikipedia.org/wiki

Can the tram overturn?

Description : Or is it at such a center of gravity that it would not overturn? We have a ****** tram with us and it always cuts a bend so much that I've been afraid several times that it wouldn't overturn. He rides with it like **** the driver.

Last Answer : Everything can turn over. The driver should drive in such a way that the passengers feel safe.

Which vehicle will be most at risk from the tram rails?

Description : Which vehicle will be most at risk from the tram rails?

Last Answer : The bicycle is the vehicle most at risk from skidding on the metal tram-lines (rails), especially in the rain. Or, as happened to me when cycling through Liverpool, England, many years ... (rectangular shaped granite blocks that covered the surface of many Liverpool streets at that period (1965ish).

A ball weighing 250 gm is thrown vertically upwards with a velocity of 980 cm/sec. The time that the ball will take to return back to earth would be a.1 sec b.4 sec c.2 sec d.5 sec e.3 sec

Description : A ball weighing 250 gm is thrown vertically upwards with a velocity of 980 cm/sec. The time that the ball will take to return back to earth would be a.1 sec b.4 sec c.2 sec d.5 sec e.3 sec

Last Answer : c. 2 sec

The position of a brick when laid on its side 9 cm × 9 cm with its frog in the vertical plane, is called (A) Brick on edge (B) Brick on end (C) Brick on bed (D) Brick held vertically

Description : The position of a brick when laid on its side 9 cm × 9 cm with its frog in the vertical plane, is called (A) Brick on edge (B) Brick on end (C) Brick on bed (D) Brick held vertically

Last Answer : Option B

In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Description : In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Last Answer : (B) At the built-in upper cross-section

A stone is thrown vertically upwards from the ground with a velocity 15 m/s. At the same instant a ball is dropped from a point directly

Description : A stone is thrown vertically upwards from the ground with a velocity 15 m/s. At the same instant a ball is dropped from a point directly

Last Answer : A stone is thrown vertically upwards from the ground with a velocity 15 m/s. At the same instant a ball ... Use g = 10 m/s2 for ease of calculation).

Reduction of load capacity in a ruling gradient of (A) 1 in 10, is 10% (B) 1 in 15, is 15% (C) 1 in 20, is 10% (D) 1 in 25, is 25%

Description : Reduction of load capacity in a ruling gradient of (A) 1 in 10, is 10% (B) 1 in 15, is 15% (C) 1 in 20, is 10% (D) 1 in 25, is 25%

Last Answer : Answer: Option C

The best compromise between the increase of the length of a highway and reduction in its load carrying capacity, is the ruling gradient (A) 1 in 10 (B) 1 in 15 (C) 1 in 20 (D) 1 in 25

Description : The best compromise between the increase of the length of a highway and reduction in its load carrying capacity, is the ruling gradient (A) 1 in 10 (B) 1 in 15 (C) 1 in 20 (D) 1 in 25

Last Answer : Answer: Option C

In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by aslowly falling body weighing 40 kg through a height of 4 m. The process isrepeated 500 times. The acceleration due to gravity is 9.8 ms-2. Neglectingthe heat capacity of agitator, the temperature of water (in °C) is(A) 40.5(B) 34.4(C) 26.8(D) 25

Description : In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by a slowly falling body weighing 40 kg through a height of 4 m. The process is repeated ... temperature of water (in °C) is (A) 40.5 (B) 34.4 (C) 26.8 (D) 25

Last Answer : (B) 34.4

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

If you want to add 500,000 units of capacity to an assembly line with an automation rating of 5, how much will it cost? a. 1,200,000 b. 1,300,000 c. 13,000,000 d. 24,000,000 e. 26,000,000

Description : If you want to add 500,000 units of capacity to an assembly line with an automation rating of 5, how much will it cost? a. 1,200,000 b. 1,300,000 c. 13,000,000 d. 24,000,000 e. 26,000,000

Last Answer : c. 13,000,000

24 tins of water fill a bunker when the capacity of each bunker is 27litres. How many tins will be needed to fill the same bunker, if the capacity of each tin is 18litres? A) 36 B) 26 C) 46 D) 56

Description : 24 tins of water fill a bunker when the capacity of each bunker is 27litres. How many tins will be needed to fill the same bunker, if the capacity of each tin is 18litres? A) 36 B) 26 C) 46 D) 56

Last Answer : A Capacity of the bunker = (24 * 27)litres =648litrs Capacity of each tin = 18litres Number of tins needed = 648/18 =36.

The eccentricity (e) of a hollow circular column, external diameter 25 cm, internal diameter 15 cm for an eccentric load 100 t for non-development of tension, is (A) 2.75 cm (B) 3.00 cm (C) 3.50 cm (D) 4.25 cm

Description : The eccentricity (e) of a hollow circular column, external diameter 25 cm, internal diameter 15 cm  for an eccentric load 100 t for non-development of tension, is  (A) 2.75 cm  (B) 3.00 cm  (C) 3.50 cm  (D) 4.25 cm

Last Answer : (D) 4.25 cm

A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : (A) 10 cm

If a rectangular pre-stressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Description : If a rectangular pre-stressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

Last Answer : Answer: Option B

A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 , the area of steel required, is (A) 14 cm(B) 15 cm2(C) 16 cm2(D) 17 cm

Description : A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 ... area of steel required, is (A) 14 cm (B) 15 cm2 (C) 16 cm2 (D) 17 cm

Last Answer : Answer: Option C

What will be the values of x, m and n after execution of the following statements? Int x, m, n; m=10; n=15; x= ++m + n++; A) x=25, m=10, n=15 B) x=27, m=10, n=15 C) x=26, m=11, n=16 D) x=27, m=11, n=16

Description : What will be the values of x, m and n after execution of the following statements? Int x, m, n; m=10; n=15; x= ++m + n++; A) x=25, m=10, n=15 B) x=27, m=10, n=15 C) x=26, m=11, n=16 D) x=27, m=11, n=16

Last Answer : C) x=26, m=11, n=16

X, Y, Z are engaged to do a certain piece of work for Rs.8200.Y and Z are to execute 15/26 of the work together. Amount to be paid to X is A) 4287 B) 3469 C) 6124 D) 2865

Description : X, Y, Z are engaged to do a certain piece of work for Rs.8200.Y and Z are to execute 15/26 of the work together. Amount to be paid to X is A) 4287 B) 3469 C) 6124 D) 2865

Last Answer : Answer: B)  Y and Z are execute 15/26 of week Balance =1-15/26  11/26 of work completed by X  X’s share of revenue  =11/26 *8200  =Rs 3469

A triangle and a parallelogram have the same base and the same area. If the sides of the triangle are 26 cm, 28 cm and 30 cm, -Maths 9th

Description : A triangle and a parallelogram have the same base and the same area. If the sides of the triangle are 26 cm, 28 cm and 30 cm, -Maths 9th

Last Answer : For the given triangle, we have a = 28 cm, b = 30 cm, c = 26 cm Area of the given parallelogram = Area of the given triangle ∴ Area of the parallelogram = 336 cm2 ⇒ base x height = 336 ⇒ ... be the height of the parallelogram. ⇒ h = 33628 = 12 Thus, the required height of the parallelogram = 12 cm

The approximate diameter of a water mains for supplying 7.2 mld with a velocity 1.2 m/sec, is (A) 24 cm (B) 26 cm (C) 28 cm (D) 30 cm

Description : The approximate diameter of a water mains for supplying 7.2 mld with a velocity 1.2 m/sec, is (A) 24 cm (B) 26 cm (C) 28 cm (D) 30 cm

Last Answer : (D) 30 cm

The ball bearing is subjected to a radial load of 4000 N. Expected life for 90% bearings is 9000 hr and the shaft is rot (a) 42.21 kN (b) 37.29 kN (c) 26.33 kN (d) 35.22 kN

Description : The ball bearing is subjected to a radial load of 4000 N. Expected life for 90% bearings is 9000 hr and the shaft is rot (a) 42.21 kN (b) 37.29 kN (c) 26.33 kN (d) 35.22 kN

Last Answer : (b) 37.29 kN

The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of 4 tonnes at the centre. The maximum stress in the bottom most fibre at the mid span section, is (A) 13.33 kg/cm2 tensile (B) 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Description : The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of ... 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Last Answer : (C) 26.67 kg/cm2 tensile

A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Description : A beam of uniform rectangular section 200 mm wide and 300mm deep is simply supported at its ends.It carries a uniformly distributed load of 9KN/m run over the entire span of 5m.If E=1×104 N/mm2, what is the maximum deflection? a.14.26 mm b.17.28 mm c.18.53 mm d.16.27 mm.

Last Answer : d.16.27 mm.

A cantilever of length 3m carries a point load of 60 KN at a distance of 2m from the fixed end.If E= 2×105 and I=108, what is the deflection at the free end?. a.7 mm b.14 mm c.26 mm d.52 mm.

Description : A cantilever of length 3m carries a point load of 60 KN at a distance of 2m from the fixed end.If E= 2×105 and I=108, what is the deflection at the free end?. a.7 mm b.14 mm c.26 mm d.52 mm.

Last Answer : b.14 mm

The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface) (A) (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Description : The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, ... (IG/ ) - (B) (IG/ ) - (C) ( /IG) + (D) (IG/ ) +

Last Answer : Answer: Option D

The TOTAL energy of a vertically vibrating block attached to a spring is the same: w) only at those points above the equilibrium position x) only at the equilibrium position y) only at those points below the equilibrium position z) at all points in its motion

Description : The TOTAL energy of a vertically vibrating block attached to a spring is the same: w) only at those points above the equilibrium position x) only at the equilibrium position y) only at those points below the equilibrium position z) at all points in its motion

Last Answer : ANSWER: Z -- AT ALL POINTS IN ITS MOTION

An object is projected vertically upward near the surface of the earth. At the very top of its path, the object's velocity is zero, and its acceleration is: w) 0 x) 9.8 meters per second squared DOWNWARD y) 9.8 meters per second squared UPWARD z) depends on the mass of the object

Description : An object is projected vertically upward near the surface of the earth. At the very top of its path, the object's velocity is zero, and its acceleration is: w) 0 x) 9.8 meters per second squared DOWNWARD y) 9.8 meters per second squared UPWARD z) depends on the mass of the object

Last Answer : ANSWER: X -- 9.8 METERS PER SECOND SQUARED DOWNWARD