A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a time factor 0.20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at
upper and lower surfaces. Coefficient of consolidation is 0.015 cm2
 per minute. For attaining 50%
consolidation with a time factor 0.20, the number of days required
(A) 3233
(B) 3123
(C) 33331
(D) 3313
by

1 Answer

Answer :

Answer: Option C
by

Related questions

If Cv is the coefficient of consolidation, is the time and is drainage path of one dimensional consolidation of soil, the time factor Tv, is given by (A) Tv = d²/Cv t (B) Tv = t²/d²Cv (C) Tv = Cv3 /d²t (D) Tv = Cv t/dt

Description : If Cv is the coefficient of consolidation, is the time and is drainage path of one dimensional consolidation of soil, the time factor Tv, is given by (A) Tv = d²/Cv t (B) Tv = t²/d²Cv (C) Tv = Cv3 /d²t (D) Tv = Cv t/dt

Last Answer : Answer: Option D

Time factor for a clay layer is (A) A dimensional parameter (B) Directly proportional to permeability of soil (C) Inversely proportional to drainage path (D) Independent of thickness of clay layer

Description : Time factor for a clay layer is (A) A dimensional parameter (B) Directly proportional to permeability of soil (C) Inversely proportional to drainage path (D) Independent of thickness of clay layer

Last Answer : (B) Directly proportional to permeability of soil

A stratum of clay 2 m thick will get consolidated 80% in 10 years. For the 80% consolidation of 8 m thick stratum of the same clay, the time required is (A) 100 years (B) 120 years (C) 140 years (D) 160 years

Description : A stratum of clay 2 m thick will get consolidated 80% in 10 years. For the 80% consolidation of 8 m thick stratum of the same clay, the time required is (A) 100 years (B) 120 years (C) 140 years (D) 160 years

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Coefficient of compressibility is the decrease in void ratio per unit increase of pressure (B) The percent settlement at any time is called degree of consolidation (C) Time factor is a dimensionless quantity (D) All the above

Description : Pick up the correct statement from the following: (A) Coefficient of compressibility is the decrease in void ratio per unit increase of pressure (B) The percent settlement at any time is called degree of consolidation (C) Time factor is a dimensionless quantity (D) All the above

Last Answer : Answer: Option D

The difference in the reservoir level and the lowest point of the water mains is 180 m. The expected pressure due to water hammer is 7.5 kg/cm2 in a pressure conduit of diameter 1 m. Assuming the efficiency of the riveted joints of the pipe as 0.6 and minimum cover 3 mm for corrosion, the thickness of the pipe materials, is (A) 10 mm (B) 15 mm (C) 20 mm (D) 25 mm

Description : The difference in the reservoir level and the lowest point of the water mains is 180 m. The  expected pressure due to water hammer is 7.5 kg/cm2  in a pressure conduit of diameter 1 m.  Assuming the efficiency of the ... , is  (A) 10 mm  (B) 15 mm  (C) 20 mm  (D) 25 mm 

Last Answer : (C) 20 mm

The coefficient of permeability of soils, is generally expressed in (A) cm/sec (B) cm/minute (C) cm2 /sec (D) cm2 /minute

Description : The coefficient of permeability of soils, is generally expressed in (A) cm/sec (B) cm/minute (C) cm2 /sec (D) cm2 /minute

Last Answer : (A) cm/sec

If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Description : If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Last Answer : Answer: Option C

The area of a drainage basin whose axial length is 100 km is 2500 sq. km. Its form factor is (A) 0.10 (B) 0.20 (C) 0.25 (D) 0.35

Description : The area of a drainage basin whose axial length is 100 km is 2500 sq. km. Its form factor is (A) 0.10 (B) 0.20 (C) 0.25 (D) 0.35

Last Answer : Answer: Option C

If drainage is permitted throughout the test, during the application of both normal, and shear stresses so that full consolidation occurs and no excess pore pressure is set up at any stage of the test, is known as (A) Quick test (B) Drained test (C) Consolidated undrained test (D) None of these

Description : If drainage is permitted throughout the test, during the application of both normal, and shear stresses so that full consolidation occurs and no excess pore pressure is set up at any stage of the test, is ... (A) Quick test (B) Drained test (C) Consolidated undrained test (D) None of these

Last Answer : Answer: Option B

A level when set up 25 m from peg A and 50 m from peg B reads 2.847 on a staff held on A and 3.462 on a staff held on B, keeping bubble at its centre while reading. If the reduced levels of A and B are 283.665 m and 284.295 m respectively, the collimation error per 100 m is (A) 0.015 m (B) 0.030 m (C) 0.045 m (D) 0.060 m

Description : A level when set up 25 m from peg A and 50 m from peg B reads 2.847 on a staff held on A and 3.462 on a staff held on B, keeping bubble at its centre while reading. If the reduced levels of A and B are 283.665 m ... collimation error per 100 m is (A) 0.015 m (B) 0.030 m (C) 0.045 m (D) 0.060 m

Last Answer : (D) 0.060 m

Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Description : Area of steel required per metre width of pavement for a length of 20 m for design wheel load 6300 kg and permissible stress in steel 1400 kg/cm2 , is (A) 70 kg/sq cm (B) 80 kg/sq cm (C) 90 kg/sq cm (D) 100 kg/sq cm

Last Answer : Answer: Option C

The most suitable material for the central impervious core of a zoned embankment type dam is (A) Clay (B) Coarse sand (C) Silty clay (D) Clay mixed with fine sand

Description : The most suitable material for the central impervious core of a zoned embankment type dam is (A) Clay (B) Coarse sand (C) Silty clay (D) Clay mixed with fine sand

Last Answer : Answer: Option D

The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Last Answer : (B) 12.88

Degree of consolidation is (A) Directly proportional to time and inversely proportional to drainage path (B) Directly proportional to time and inversely proportional to square of drainage path (C) Directly proportional to drainage path and inversely proportional to time (D) Directly proportional to square of drainage path and inversely proportional to time

Description : Degree of consolidation is (A) Directly proportional to time and inversely proportional to drainage path (B) Directly proportional to time and inversely proportional to square of drainage path (C ... to time (D) Directly proportional to square of drainage path and inversely proportional to time

Last Answer : Answer: Option B

A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 , the area of steel required, is (A) 14 cm(B) 15 cm2(C) 16 cm2(D) 17 cm

Description : A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 ... area of steel required, is (A) 14 cm (B) 15 cm2 (C) 16 cm2 (D) 17 cm

Last Answer : Answer: Option C

When drainage is permitted under initially applied normal stress only and full primarily consolidation is allowed to take place, the test is known as (A) Quick test (B) Drained test (C) Consolidated undrained test (D) None of these

Description : When drainage is permitted under initially applied normal stress only and full primarily consolidation is allowed to take place, the test is known as (A) Quick test (B) Drained test (C) Consolidated undrained test (D) None of these

Last Answer : (C) Consolidated undrained test

During consolidation process of clayey soils, indicate the sequence of occurrence of the following events in the order from first to last : 1. Load being taken up by the pore water 2. Load being taken up by the soil grains 3. Drainage of water from the pores of the soil (a) 1, 2 and 3 (b) 2, 3 and 1 (c) 1, 3 and 2 (d) 2, 1 and 3

Description : During consolidation process of clayey soils, indicate the sequence of occurrence of the following events in the order from first to last : 1. Load being taken up by the pore water 2. Load being taken up by the soil grains 3. Drainage of ... 1, 2 and 3 (b) 2, 3 and 1 (c) 1, 3 and 2 (d) 2, 1 and 3

Last Answer : (c) 1, 3 and 2

Within the consolidation process of a saturated clay (A) A gradual increase in neutral pressure and a gradual decrease in effective pressure take place and sum of the two is constant (B) A gradual decrease in neutral pressure and a gradual increase in effective pressure take place and sum of the two is constant (C) Both neutral pressure and effective pressure decrease (D) Both neutral pressure and effective pressure increase

Description : Within the consolidation process of a saturated clay (A) A gradual increase in neutral pressure and a gradual decrease in effective pressure take place and sum of the two is ... Both neutral pressure and effective pressure decrease (D) Both neutral pressure and effective pressure increase

Last Answer : Answer: Option B

Coefficient of consolidation of a soil is affected by (A) Compressibility (B) Permeability (C) Both compressibility and permeability (D) None of the above

Description : Coefficient of consolidation of a soil is affected by (A) Compressibility (B) Permeability (C) Both compressibility and permeability (D) None of the above

Last Answer : (C) Both compressibility and permeability

The maximum value of effective stress in the past divided by the present value is defined as over consolidation ratio (OCR). The O.C.R. of an over consolidated clay is (A) Less than 1 (B) 1 (C) More than 1 (D) None of these

Description : The maximum value of effective stress in the past divided by the present value is defined as over consolidation ratio (OCR). The O.C.R. of an over consolidated clay is (A) Less than 1 (B) 1 (C) More than 1 (D) None of these

Last Answer : (C) More than 1

Pick up the correct statement from the following: (A) Isotropic consolidation of clay can be obtained in the triaxial apparatus under equal all￾round pressure (B) If the present effective stress is the maximum to which the clay has ever been subjected, it is called normally consolidated clay (C) If the present effective stress in the past was more than present effective stress, it is called over-consolidated clay (D) All the above

Description : Pick up the correct statement from the following: (A) Isotropic consolidation of clay can be obtained in the triaxial apparatus under equal all￾round pressure (B) If the present effective stress is the ... more than present effective stress, it is called over-consolidated clay (D) All the above

Last Answer : Answer: Option D

Which one of the following clays behaves like a dense sand? (A) Over-consolidated clay with a high over-consolidation ratio (B) Over-consolidated clay with a low over-consolidation ratio (C) Normally consolidated clay (D) Under-consolidated clay

Description : Which one of the following clays behaves like a dense sand? (A) Over-consolidated clay with a high over-consolidation ratio (B) Over-consolidated clay with a low over-consolidation ratio (C) Normally consolidated clay (D) Under-consolidated clay

Last Answer : Answer: Option A

In clay soil (A) Swelling and shrinkage characteristics prevail (B) Consolidation continues even after several years of construction (C) Differential settlement is generally prevalent (D) All the above

Description : In clay soil (A) Swelling and shrinkage characteristics prevail (B) Consolidation continues even after several years of construction (C) Differential settlement is generally prevalent (D) All the above

Last Answer : Answer: Option D

The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose endsare hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2, the permissible maximumcrippling load will be (a) 1.288 tonnes (b) 12.88 (c) 128.8 tonnes (d) 288.0

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose endsare hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2, the permissible maximumcrippling load will be (a) 1.288 tonnes (b) 12.88 (c) 128.8 tonnes (d) 288.0

Last Answer : (b) 12.88

Coefficient of consolidation for clays normally (A) Decreases with increase in liquid limit (B) Increases with increase in liquid limit (C) First increases and then decreases with increase in liquid limit (D) Remains constant at all liquid limits

Description : Coefficient of consolidation for clays normally (A) Decreases with increase in liquid limit (B) Increases with increase in liquid limit (C) First increases and then decreases with increase in liquid limit (D) Remains constant at all liquid limits

Last Answer : (A) Decreases with increase in liquid limit

Coefficient of compressibility is (A) Constant for any type of soil (B) Different for different types of soils and also different for a soil under different states of consolidation (C) Different for different types of soils but same for a soil under different states of consolidation (D) Independent of type of soil but depends on the stress history of soil

Description : Coefficient of compressibility is (A) Constant for any type of soil (B) Different for different types of soils and also different for a soil under different states of consolidation (C) Different for ... of consolidation (D) Independent of type of soil but depends on the stress history of soil

Last Answer : Answer: Option B

Terzaghi's theory of one dimensional consolidation assumes (A) Load is applied in one direction (B) Coefficient of permeability is constant (C) Excess pore water drains out only in the vertical direction (D) All the above

Description : Terzaghi's theory of one dimensional consolidation assumes (A) Load is applied in one direction (B) Coefficient of permeability is constant (C) Excess pore water drains out only in the vertical direction (D) All the above

Last Answer : Answer: Option D

An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it carries a U.D.L. of 12 t per m and allowable shear stress is 5 kg/cm2 , the beam (A) Is safe in shear (B) Is safe with stirrups (C) Is safe with stirrups and inclined bars (D) Needs revision of section

Description : An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it carries a U.D.L. of 12 t per m and allowable shear stress is 5 kg/cm2 , the beam (A) Is safe in shear (B) Is safe with stirrups (C) Is safe with stirrups and inclined bars (D) Needs revision of section

Last Answer : Answer: Option D

Choose the most important factor on which the heat conducted through a wall in a unit time will depend on? (A) Thickness of the wall (B) Area of the wall perpendicular to heat flow (C) Material of the wall (D) Temperature difference between the two surfaces of the wall

Description : Choose the most important factor on which the heat conducted through a wall in a unit time will depend on? (A) Thickness of the wall (B) Area of the wall perpendicular to heat flow (C) Material of the wall (D) Temperature difference between the two surfaces of the wall

Last Answer : (D) Temperature difference between the two surfaces of the wall

Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are (A) 5.0 (B) 6.5(C) 7.0 (D) 7.5

Description : Minimum number of 50 kg cement bags per cubic metre of concrete for a mix corresponding to crushing strength 280 kg/cm2 at 28 days, are (A) 5.0 (B) 6.5 (C) 7.0 (D) 7.5

Last Answer : Answer: Option B

If there is no impervious boundary at the bottom of a hydraulic structure, stream lines tend to follow: (A) A straight line (B) A parabola (C) A semi-ellipse (D) A semi-circle

Description : If there is no impervious boundary at the bottom of a hydraulic structure, stream lines tend to follow: (A) A straight line (B) A parabola (C) A semi-ellipse (D) A semi-circle

Last Answer : (C) A semi-ellipse

With regard to the lacrimal drainage system: a. the upper lacrimal punctum is lateral to the lower punctum b. the lacrimal canaliculi are lined by stratified squamous epithelium c. nasolacrimal duct is narrowest at the lowest end d. nasolacrimal duct runs downwards, lateral and forwards to the anterior part of inferior meatus e. congenital blockage is due mainly to delay development of common canaliculus

Description : With regard to the lacrimal drainage system: a. the upper lacrimal punctum is lateral to the lower punctum b. the lacrimal canaliculi are lined by stratified squamous epithelium c. ... part of inferior meatus e. congenital blockage is due mainly to delay development of common canaliculus

Last Answer : the upper lacrimal punctum is lateral to the lower punctum

In general, chest drainage tubes are not used for the patient undergoing a) Pneumonectomy Usually, no drains are used for the pneumonectomy patient because the accumulation of fluid in the empty hemithorax prevents mediastinal shift. b) Lobectomy With lobectomy, two chest tubes are usually inserted for drainage, the upper for air and the lower for fluid c) Wedge resection With wedge resection, the pleural cavity usually is drained because of the possibility of an air or blood leak d) Segmentectomy With segmentectomy, drains are usually used because of the possibility of an air or blood leak.

Description : In general, chest drainage tubes are not used for the patient undergoing a) Pneumonectomy Usually, no drains are used for the pneumonectomy patient because the accumulation of fluid in the empty ... With segmentectomy, drains are usually used because of the possibility of an air or blood leak.

Last Answer : a) Pneumonectomy Usually, no drains are used for the pneumonectomy patient because the accumulation of fluid in the empty hemithorax prevents mediastinal shift.

Interior thickness of concrete road slab for design wheel load 6300 kg and permissible flexural stress 21 kg/cm2 , is (A) 17.0 cm (B) 25.5 cm (C) 34.0 cm (D) 42.5 cm

Description : Interior thickness of concrete road slab for design wheel load 6300 kg and permissible flexural stress 21 kg/cm2 , is (A) 17.0 cm (B) 25.5 cm (C) 34.0 cm (D) 42.5 cm

Last Answer : Answer: Option B

Newton’s rings are formed because of interference between the light Reflected from (a) Upper surface of Plano-convex lens and lower surface of plane glass plate (b) Lower surface of Plano-convex lens and upper surface of plane glass plate (c) Lower and upper surface of Plano-convex (d) Lower and upper surfaces of plane glass plate

Description : Newton's rings are formed because of interference between the light Reflected from (a) Upper surface of Plano-convex lens and lower surface of plane glass plate (b) Lower surface of Plano-convex ... c) Lower and upper surface of Plano-convex (d) Lower and upper surfaces of plane glass plate

Last Answer : (b) Lower surface of Plano-convex lens and upper surface of plane glass plate

The aggregates required for one kilometre length of water bound macadam road per meter width and for 10 mm thickness is (A) 8 cubic meter (B) 10 cubic meter (C) 12 cubic meter (D) 15 cubic meter

Description : The aggregates required for one kilometre length of water bound macadam road per meter width and for 10 mm thickness is (A) 8 cubic meter (B) 10 cubic meter (C) 12 cubic meter (D) 15 cubic meter

Last Answer : Answer: Option C

direct shear test possesses the following disadvantage: (A) A relatively thin thickness of sample permits quick drainage (B) A relatively thin thickness of sample permits quick dissipation of pore pressure developed during the test (C) As the test progresses the area under shear, gradually changes (D) None of these

Description : direct shear test possesses the following disadvantage: (A) A relatively thin thickness of sample permits quick drainage (B) A relatively thin thickness of sample permits quick dissipation of pore pressure ... C) As the test progresses the area under shear, gradually changes (D) None of these

Last Answer : Answer: Option C

Thickness of a pavement may be reduced considerably by (A) Compaction of soil (B) Stabilisation of soil (C) Drainage of soil (D) Combination of all the above

Description : Thickness of a pavement may be reduced considerably by (A) Compaction of soil (B) Stabilisation of soil (C) Drainage of soil (D) Combination of all the above

Last Answer : Answer: Option D

The tensile force required to cause an elongation of 0.045 mm in a steel rod of 1000 mm length and 12 mm diameter, is (where E = 2 × 106 kg/cm2 ) (A) 166 kg (B) 102 kg (C) 204 kg (D) 74 kg

Description : The tensile force required to cause an elongation of 0.045 mm in a steel rod of 1000 mm length and 12 mm diameter, is (where E = 2 × 106 kg/cm2 ) (A) 166 kg (B) 102 kg (C) 204 kg (D) 74 kg

Last Answer : (B) 102 kg

Whose last words, as reported in his obituary in The Times, were alleged to have been: “Be natural my children. For the writer that is natural has fulfilled all the rules of art.”? His will stipulated that no memorial be erected to honour him.

Description : Whose last words, as reported in his obituary in The Times, were alleged to have been: “Be natural my children. For the writer that is natural has fulfilled all the rules of art.”? His will stipulated that no memorial be erected to honour him.

Last Answer : Charles Dickens.

The coefficient of friction depends upon (A) Nature of surfaces (B) Area of contact (C) Shape of the surfaces (D) All of the above

Description : The coefficient of friction depends upon (A) Nature of surfaces (B) Area of contact (C) Shape of the surfaces (D) All of the above

Last Answer : (A) Nature of surfaces

The coefficient of friction depends on (A) Area of contact (B) Shape of surfaces (C) Strength of surfaces (D) Nature of surface

Description : The coefficient of friction depends on (A) Area of contact (B) Shape of surfaces (C) Strength of surfaces (D) Nature of surface

Last Answer : (D) Nature of surface

Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth

Description : Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth

Last Answer : (D) Earth

A short column 20 cm × 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on the column, should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these

Description : A short column 20 cm 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on ... should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these

Last Answer : Answer: Option B

For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Description : For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Last Answer : (C) 25.0 m

Two observation wells penetrating into a confined aquifer are located 1500 m apart in the direction of flow. Heads of 50 m and 25 m are indicated at these two observation wells. If the coefficient of permeability for the aquifer is 30 m/day and its porosity is 0.25, the time of travel of an inert tracer from one well to another is (a) 75 days (b) 750 days (c) 1200 days (d) 3000 days

Description : Two observation wells penetrating into a confined aquifer are located 1500 m apart in the direction of flow. Heads of 50 m and 25 m are indicated at these two observation wells. If the coefficient of permeability for the ... well to another is (a) 75 days (b) 750 days (c) 1200 days (d) 3000 days

Last Answer : (b) 750 days

The mechanism method and the statical method guide in estimating (a) The lower and upper bounds respectively on the strength of structure (b) The upper and lower bounds respectively on the strength of structure (c) The lower bound on the strength of structure (d) The upper bound on the strength of structure

Description : The mechanism method and the statical method guide in estimating (a) The lower and upper bounds respectively on the strength of structure (b) The upper and lower bounds respectively on the strength of ... The lower bound on the strength of structure (d) The upper bound on the strength of structure

Last Answer : (b) The upper and lower bounds respectively on the strength of structure

A water main 1 m in diameter contains a fluid having pressure 1 N/mm2. If the maximum permissible tensile stress in the metal is 20 N/mm2, th thickness of the metal required would be a) 2 cm b) 2.5cm c) 1 cm d) 0.5 cm

Description : A water main 1 m in diameter contains a fluid having pressure 1 N/mm2. If the maximum permissible tensile stress in the metal is 20 N/mm2, th thickness of the metal required would be a) 2 cm b) 2.5cm c) 1 cm d) 0.5 cm

Last Answer : b) 2.5cm

The usual percentages of clay and metal in cermet are: (A) 50%, 50% (B) 60%, 40% (C) 70%, 30% (D) 80%, 20%

Description : The usual percentages of clay and metal in cermet are: (A) 50%, 50% (B) 60%, 40% (C) 70%, 30% (D) 80%, 20%

Last Answer : Answer: Option D

Select the correct statement. (A) More the value of group index, less thickness of pavement will be required (B) More the value of CBR, greater thickness of pavement will be required (C) Minimum and maximum values of group index can be 0 and 20 respectively (D) All of the above

Description : Select the correct statement. (A) More the value of group index, less thickness of pavement will be required (B) More the value of CBR, greater thickness of pavement will be required (C) Minimum and maximum values of group index can be 0 and 20 respectively (D) All of the above

Last Answer : Answer: Option C