The polarisation of dielectric material results in

by

1 Answer

Answer :

The polarisation of dielectric material results in Creation of electric dipoles.

by

Related questions

When a dielectric loses its dielectric property, the phenomenon is called a) Dielectric loss b) Dielectric breakdown c) Polarisation d) Magnetization

Description : When a dielectric loses its dielectric property, the phenomenon is called a) Dielectric loss b) Dielectric breakdown c) Polarisation d) Magnetization

Last Answer : b) Dielectric breakdown

Calculate the energy stored per unit volume in a dielectric medium due to polarisation when P = 9 units and E = 8 units. a) 1.77 b) 2.25 c) 36 d) 144

Description : Calculate the energy stored per unit volume in a dielectric medium due to polarisation when P = 9 units and E = 8 units. a) 1.77 b) 2.25 c) 36 d) 144

Last Answer : c) 36

A dielectric material is placed in between the plates of a capacitor, it

Last Answer : A dielectric material is placed in between the plates of a capacitor, it Increases the capacitance.

The total polarisation of a material is the a) Product of all types of polarisation b) Sum of all types of polarisation c) Orientation directions of the dipoles d) Total dipole moments in the material

Description : The total polarisation of a material is the a) Product of all types of polarisation b) Sum of all types of polarisation c) Orientation directions of the dipoles d) Total dipole moments in the material

Last Answer : b) Sum of all types of polarisation

Calculate the polarisation vector of the material which has 100 dipoles per unit volume in a volume of 2 units. a) 200 b) 50 c) 400 d) 0.02

Description : Calculate the polarisation vector of the material which has 100 dipoles per unit volume in a volume of 2 units. a) 200 b) 50 c) 400 d) 0.02

Last Answer : a) 200

Dielectric Constant and Dielectric Strength are

Last Answer : Dielectric Constant and Dielectric Strength are same.

_________is a form of non-volatile storage that operates by changing the resistance of a specially formulated solid dielectric material. A. VRAM B. WRAM C. MRAM D. RRAM

Description : _________is a form of non-volatile storage that operates by changing the resistance of a specially formulated solid dielectric material. A. VRAM B. WRAM C. MRAM D. RRAM

Last Answer : D. RRAM Resistive RAM

The 'dielectric constant' is a numerical value indicating the effectiveness of a dielectric material in comparison to that of a standard, which is _______________. A. paper or cloth B. glass or mica C. plastic or Teflon D. dry air or a vacuum

Description : The 'dielectric constant' is a numerical value indicating the effectiveness of a dielectric material in comparison to that of a standard, which is _______________. A. paper or cloth B. glass or mica C. plastic or Teflon D. dry air or a vacuum

Last Answer : Answer: D

A 'dielectric' is a/an ________________. A. electrical insulator B. current flow C. good conductor D. semiconductor material

Description : A 'dielectric' is a/an ________________. A. electrical insulator B. current flow C. good conductor D. semiconductor material

Last Answer : Answer: A

Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Description : Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Last Answer : B. Velocity factor

ECE Board Exam March 1996 That dielectric material of an optical fiber surrounding the core A. Cladding B. Armor C. Shield D. Cover in

Description : ECE Board Exam March 1996 That dielectric material of an optical fiber surrounding the core A. Cladding B. Armor C. Shield D. Cover

Last Answer : A. Cladding

Dielectric strength of a material is (A) Its energy storage capacity (B) A magnetic property (C) Its capacity to resist the flow of current(D) Its capacity to withstand high voltage

Description : Dielectric strength of a material is (A) Its energy storage capacity (B) A magnetic property (C) Its capacity to resist the flow of current (D) Its capacity to withstand high voltage

Last Answer : (D) Its capacity to withstand high voltage

The permeability of a dielectric material in air medium will be a) Absolute permeability b) Relative permeability c) Product of absolute and relative permeability d) Unity

Description : The permeability of a dielectric material in air medium will be a) Absolute permeability b) Relative permeability c) Product of absolute and relative permeability d) Unity

Last Answer : a) Absolute permeability

Compute the conductivity when the current density is 12 units and the electric field is 20 units. Also identify the nature of the material. a) 1.67, dielectric b) 1.67, conductor c) 0.6, dielectric d) 0.6, conductor

Description : Compute the conductivity when the current density is 12 units and the electric field is 20 units. Also identify the nature of the material. a) 1.67, dielectric b) 1.67, conductor c) 0.6, dielectric d) 0.6, conductor

Last Answer : c) 0.6, dielectric

Dielectric property impacts the behaviour of a material in the presence of electric field. State True/False. a) True b) False

Description : Dielectric property impacts the behaviour of a material in the presence of electric field. State True/False. a) True b) False

Last Answer : a) True

If the loss tangent is very less, then the material will be a a) Conductor b) Lossless dielectric c) Lossy dielectric d) Insulator

Description : If the loss tangent is very less, then the material will be a a) Conductor b) Lossless dielectric c) Lossy dielectric d) Insulator

Last Answer : b) Lossless dielectric

Find the dielectric constant for a material with electric susceptibility of 4. a) 3 b) 5 c) 8 d) 16

Description : Find the dielectric constant for a material with electric susceptibility of 4. a) 3 b) 5 c) 8 d) 16

Last Answer : b) 5

Find the susceptibility of a material whose dielectric constant is 2.26. a) 1.26 b) 3.26 c) 5.1 d) 1

Description : Find the susceptibility of a material whose dielectric constant is 2.26. a) 1.26 b) 3.26 c) 5.1 d) 1

Last Answer : a) 1.26

Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Description : Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Last Answer : (A) Is an electrical insulating material

Which of the following is not a dielectric material? (A) Cotton, silk and paper (B) Asbestos, glass, porcelain and mica (C) Rubber and polymeric resins (D) All refractory materials

Description : Which of the following is not a dielectric material? (A) Cotton, silk and paper (B) Asbestos, glass, porcelain and mica (C) Rubber and polymeric resins (D) All refractory materials

Last Answer : Option C

The insulating material should have (a) low permittivity (b) high resistivity (c) high dielectric strength (d) all of the above

Description : The insulating material should have (a) low permittivity (b) high resistivity (c) high dielectric strength (d) all of the above

Last Answer : (d) all of the above

The insulating material for a cable should have (a) low cost (b) high dielectric strength (c) high mechanical strength (d) all of the above

Description : The insulating material for a cable should have (a) low cost (b) high dielectric strength (c) high mechanical strength (d) all of the above

Last Answer : (d) all of the above

What types of losses cause the dielectric material between the conductors to be heated?

Description : What types of losses cause the dielectric material between the conductors to be heated?

Last Answer : Dielectric losses.

The size, shape, and dielectric material of a waveguide must be constant throughout its length for energy to move from one end to the other without reflections. What could be the effect in any abrupt change in its size or shape?

Description : The size, shape, and dielectric material of a waveguide must be constant throughout its length for energy to move from one end to the other without reflections. What could be the effect in any abrupt change in its size or shape?

Last Answer : Reflections.

Thevelocityfactor of a transmissionline a. depends on the dielectric constant of the material used b. increases the velocity along the transmission line c. is govern by the skin effect d. is higher for a solid dielectric than for air

Description : Thevelocityfactor of a transmissionline a. depends on the dielectric constant of the material used b. increases the velocity along the transmission line c. is govern by the skin effect d. is higher for a solid dielectric than for air

Last Answer : a. depends on the dielectric constant of the material used

Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Description : Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Last Answer : (D) Both insulating and dielectric material.

Describe dielectric strength of material.

Description : Describe dielectric strength of material.  

Last Answer : Dielectric strength of material: Dielectric strength is the ability of a dielectric material of specified thickness to withstand at high voltage without breaking down. It is a measure of the strength of ... strength can withstand at high voltage. It is expressed in the unit of kV/cm.

What is dielectric material? Enlist dielectric material used in capacitor.

Description : What is dielectric material? Enlist dielectric material used in capacitor.

Last Answer : A dielectric material is an electrical insulator that can be polarized by an applied electric field. Dielectric materials used in capacitor: porcelain (ceramic), mica, glass, plastics, and the oxides of various metals

Define dielectric failure of electrical insulating material.

Description : Define dielectric failure of electrical insulating material. 

Last Answer : Definition of dielectric failure of electrical insulating material. In the insulating material if the applied voltage is increased gradually then for certain value insulation will break down, ... material vanishes its insulating properties and starts conducting, also known as dielectric failure.

State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials.

Description : State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials. 

Last Answer : Failure phenomena in insulating material means the dielectric property fails :  The dielectric failure mean the dielectric strength of insulating material reduces due to high voltages or high ... 6. Due to poor maintenance of insulating material there may be possibility dielectric failure 

Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Description : Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Last Answer : (i) Polyvinyl Carbide(PVC):it is used in insulation of wires and cables in domestic wiring as well as in aircraft and factory wiring (any one)  (ii) Glass: 1) Alkaline glasses are used for ... with wax or varnishes are used in windings of magnet coils and small medium sized mechanics (any one) 

What is dielectric strength of an insulating material? What is its unit?

Description : What is dielectric strength of an insulating material? What is its unit?

Last Answer : Dielectric Strength: The dielectric strength of an insulating material is the maximum voltage which the insulating medium can withstand without breakdown. Unit is volts per millimeter (V/mm), or kV/mm or kV/cm

For an insulating material, dielectric strength and dielectric loss should be respectively

Description : For an insulating material, dielectric strength and dielectric loss should be respectively   (A) high and high (B) low and high (C) high and low (D) low and low.

Last Answer : For an insulating material, dielectric strength and dielectric loss should be respectively  high and low 

The leakage current in the transmission lines is referred to as the a) Resistance b) Radiation c) Conductance d) Polarisation

Description : The leakage current in the transmission lines is referred to as the a) Resistance b) Radiation c) Conductance d) Polarisation

Last Answer : Ans: C

The phenomenon which causes mirage is – (1) Interference (2) Diffraction (3) Polarisation (4) Total internal reflection

Description : The phenomenon which causes mirage is – (1) Interference (2) Diffraction (3) Polarisation (4) Total internal reflection

Last Answer : (4) Total internal reflection Explanation: Mirage is caused by total internal reflection in deserts where due to heating of the earth, refractive index of air near the surface of earth becomes lesser than ... ray of light coming from a distant object gets refracted from a denser to a rarer medium.

Light waves projected on oil surface show seven colours due to the phenomenon of (1) polarisation (2) refraction (3) reflection (4) interference

Description : Light waves projected on oil surface show seven colours due to the phenomenon of (1) polarisation (2) refraction (3) reflection (4) interference

Last Answer : (4) interference Explanation: In physics, interference is a phenomenon in which two waves superpose to form a resultant wave of greater, lower, or the same amplitude.

What is the phenomenon which established the transverse nature of light? (1) Reflection (2) Interference (3) Diffraction (4) Polarisation

Description : What is the phenomenon which established the transverse nature of light? (1) Reflection (2) Interference (3) Diffraction (4) Polarisation

Last Answer : (4) Polarisation Explanation: The phenomena which proves the transverse nature alight is polarization. Since the intensity of polarized light on passing through a tourmaline crystal changes, ... waves. Transverse waves are waves that are oscillating perpendicularly to the direction of propagation

Which phenomena shows the particle nature of light? (1) Diffraction (2) Interference (3) Photoelectric effect (4) Polarisation

Description : Which phenomena shows the particle nature of light? (1) Diffraction (2) Interference (3) Photoelectric effect (4) Polarisation

Last Answer : (3) Photoelectric effect Explanation: The phenomena such as interference, diffraction, and polarization can only be explained when light is treated as a wave whereas photoelectric effect, line spectra, and the production and scattering of x rays demonstrate the particle nature of light.

The sparkling of a diamond is due to – (1) total internal reflection of light (2) interference of light (3) polarisation of light (4) refraction of light

Description : The sparkling of a diamond is due to – (1) total internal reflection of light (2) interference of light (3) polarisation of light (4) refraction of light

Last Answer : (1) total internal reflection of light Explanation: Diamonds sparkle because of the total internal reflection of light. Diamonds have a very high refractive index, meaning they slow light down much more ... so that light seems to get 'trapped' within the diamond giving it it's sparkly appearance.

What is polarisation index?

Description : What is polarisation index?

Last Answer : a) It is defined as a ratio of 10 minutes resistance value to 1-minute resistance value. b) It gives a quantitative information about the insulation with respect to moisture, dirt and other contamination. c) A PI value of less than 1.0 indicates a need for immediate reconditioning. 

The Brewster angle is valid for which type of polarisation? a) S polarised b) P polarised c) Elliptical d) Linear

Description : The Brewster angle is valid for which type of polarisation? a) S polarised b) P polarised c) Elliptical d) Linear

Last Answer : b) P polarised

In P polarisation, the electric field lies in the same plane as the interface. State True/False. a) True b) False

Description : In P polarisation, the electric field lies in the same plane as the interface. State True/False. a) True b) False

Last Answer : a) True

In S polarisation, the electric field lies in the plane perpendicular to that of the interface. State True/False a) True b) False

Description : In S polarisation, the electric field lies in the plane perpendicular to that of the interface. State True/False a) True b) False

Last Answer : a) True

Identify the polarisation of the wave given that, Ex = 2 sin wt and Ey = 3 sin wt. a) Linear b) Elliptical c) Circular d) Parallel

Description : Identify the polarisation of the wave given that, Ex = 2 sin wt and Ey = 3 sin wt. a) Linear b) Elliptical c) Circular d) Parallel

Last Answer : a) Linear

When the polarisation of the receiving antenna is unknown, to ensure that it receives atleast half the power, the transmitted wave should be a) Linearly polarised b) Elliptically polarised c) Circularly polarised d) Normally polarised

Description : When the polarisation of the receiving antenna is unknown, to ensure that it receives atleast half the power, the transmitted wave should be a) Linearly polarised b) Elliptically polarised c) Circularly polarised d) Normally polarised

Last Answer : c) Circularly polarised

The Snell law is applicable for perpendicular polarisation and the Brewster law is applicable for parallel polarisation. State True/False. a) True b) False

Description : The Snell law is applicable for perpendicular polarisation and the Brewster law is applicable for parallel polarisation. State True/False. a) True b) False

Last Answer : a) True

Identify the polarisation of the wave given that, Ex = 2 cos wt and Ey = cos wt. a) Elliptical b) Circular c) Parallel d) Linear

Description : Identify the polarisation of the wave given that, Ex = 2 cos wt and Ey = cos wt. a) Elliptical b) Circular c) Parallel d) Linear

Last Answer : d) Linear

For a non-zero Ex component and zero Ey component, the polarisation is a) Parallel b) Perpendicular c) Elliptical d) Circular

Description : For a non-zero Ex component and zero Ey component, the polarisation is a) Parallel b) Perpendicular c) Elliptical d) Circular

Last Answer : a) Parallel

Identify the polarisation of the wave given, Ex = cos wt and Ey = sin wt. The phase difference is -90 0 . a) Left hand circularly polarised b) Right hand circularly polarised c) Left hand elliptically polarised d) Right hand elliptically polarised

Description : Identify the polarisation of the wave given, Ex = cos wt and Ey = sin wt. The phase difference is -90 0 . a) Left hand circularly polarised b) Right hand circularly polarised c) Left hand elliptically polarised d) Right hand elliptically polarised

Last Answer : b) Right hand circularly polarised

Identify the polarisation of the wave given, Ex = 2 cos wt and Ey = 2 sin wt. The phase difference is +90 0 . a) Left hand circularly polarised b) Right hand circularly polarised c) Left hand elliptically polarised d) Right hand elliptically polarised

Description : Identify the polarisation of the wave given, Ex = 2 cos wt and Ey = 2 sin wt. The phase difference is +90 0 . a) Left hand circularly polarised b) Right hand circularly polarised c) Left hand elliptically polarised d) Right hand elliptically polarised

Last Answer : a) Left hand circularly polarised